Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone',...

Merge branches 'pci/host-altera', 'pci/host-imx6', 'pci/host-keystone', 'pci/host-rcar', 'pci/host-tegra', 'pci/host-thunder', 'pci/host-vmd', 'pci/host-xilinx' and 'pci/host-xilinx-nwl' into next

* pci/host-altera:
  PCI: altera: Fix altera_pcie_link_is_up()

* pci/host-imx6:
  PCI: imx6: Add DT bindings to configure PHY Tx driver settings

* pci/host-keystone:
  PCI: keystone: Defer probing if devm_phy_get() returns -EPROBE_DEFER

* pci/host-rcar:
  PCI: rcar: Depend on ARCH_RENESAS, not ARCH_SHMOBILE

* pci/host-tegra:
  PCI: tegra: Remove misleading PHYS_OFFSET
  PCI: tegra: Track bus -> CPU mapping
  PCI: tegra: Remove unused struct tegra_pcie.num_ports field
  PCI: tegra: Implement ->{add,remove}_bus() callbacks
  PCI: Add pci_ops.{add,remove}_bus() callbacks

* pci/host-thunder:
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  PCI: generic: Move structure definitions to separate header file

* pci/host-vmd:
  x86/PCI: VMD: Attach VMD resources to parent domain's resource tree
  x86/PCI: VMD: Set bus resource start to 0
  x86/PCI: VMD: Document code for maintainability

* pci/host-xilinx:
  microblaze/PCI: Support generic Xilinx AXI PCIe Host Bridge IP driver
  PCI: xilinx: Update Zynq binding with Microblaze node
  PCI: xilinx: Don't call pci_fixup_irqs() on Microblaze
  PCI: xilinx: Remove dependency on ARM-specific struct hw_pci
  PCI: xilinx: Use of_pci_get_host_bridge_resources() to parse DT

* pci/host-xilinx-nwl:
  PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt

@@ -13,6 +13,13 @@ Required properties:
 - clock-names: Must include the following additional entries:
 	- "pcie_phy"
 
+Optional properties:
+- fsl,tx-deemph-gen1: Gen1 De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-3p5db: Gen2 (3.5db) De-emphasis value. Default: 0
+- fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20
+- fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127
+- fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127
+
 Example:
 
 	pcie@0x01000000 {

Documentation/devicetree/bindings/pci/pci-thunder-ecam.txt

+* ThunderX PCI host controller for pass-1.x silicon
+
+Firmware-initialized PCI host controller to on-chip devices found on
+some Cavium ThunderX processors.  These devices have ECAM-based config
+access, but the BARs are all at fixed addresses.  We handle the fixed
+addresses by synthesizing Enhanced Allocation (EA) capabilities for
+these devices.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "cavium,pci-host-thunder-ecam"
+
+Example:
+
+	pcie@84b000000000 {
+		compatible = "cavium,pci-host-thunder-ecam";
+		device_type = "pci";
+		msi-parent = <&its>;
+		msi-map = <0 &its 0x30000 0x10000>;
+		bus-range = <0 31>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		#stream-id-cells = <1>;
+		reg = <0x84b0 0x00000000 0 0x02000000>;  /* Configuration space */
+		ranges = <0x03000000 0x8180 0x00000000 0x8180 0x00000000 0x80 0x00000000>; /* mem ranges */
+	};

Documentation/devicetree/bindings/pci/pci-thunder-pem.txt

+* ThunderX PEM PCIe host controller
+
+Firmware-initialized PCI host controller found on some Cavium
+ThunderX processors.
+
+The properties and their meanings are identical to those described in
+host-generic-pci.txt except as listed below.
+
+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "cavium,pci-host-thunder-pem"
+
+- reg            : Two entries: First the configuration space for down
+                   stream devices base address and size, as accessed
+                   from the parent bus. Second, the register bank of
+                   the PEM device PCIe bridge.
+
+Example:
+
+    pci@87e0,c2000000 {
+	compatible = "cavium,pci-host-thunder-pem";
+	device_type = "pci";
+	msi-parent = <&its>;
+	msi-map = <0 &its 0x10000 0x10000>;
+	bus-range = <0x8f 0xc7>;
+	#size-cells = <2>;
+	#address-cells = <3>;
+
+	reg = <0x8880 0x8f000000 0x0 0x39000000>,  /* Configuration space */
+	      <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
+	ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
+		 <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
+		 <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
+		 <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */
+
+	#interrupt-cells = <1>;
+	interrupt-map-mask = <0 0 0 7>;
+	interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
+			<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
+			<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
+			<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+    };

Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt

+* Xilinx NWL PCIe Root Port Bridge DT description
+
+Required properties:
+- compatible: Should contain "xlnx,nwl-pcie-2.11"
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- reg: Should contain Bridge, PCIe Controller registers location,
+	configuration space, and length
+- reg-names: Must include the following entries:
+	"breg": bridge registers
+	"pcireg": PCIe controller registers
+	"cfg": configuration space region
+- device_type: must be "pci"
+- interrupts: Should contain NWL PCIe interrupt
+- interrupt-names: Must include the following entries:
+	"msi1, msi0": interrupt asserted when MSI is received
+	"intx": interrupt asserted when a legacy interrupt is received
+	"misc": interrupt asserted when miscellaneous is received
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+	mapping of the PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+- msi-controller: indicates that this is MSI controller node
+- msi-parent:  MSI parent of the root complex itself
+- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
+	- interrupt-controller: identifies the node as an interrupt controller
+	- #interrupt-cells: should be set to 1
+	- #address-cells: specifies the number of cells needed to encode an
+		address. The value must be 0.
+
+
+Example:
+++++++++
+
+nwl_pcie: pcie@fd0e0000 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+	compatible = "xlnx,nwl-pcie-2.11";
+	#interrupt-cells = <1>;
+	msi-controller;
+	device_type = "pci";
+	interrupt-parent = <&gic>;
+	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
+	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
+	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+
+	msi-parent = <&nwl_pcie>;
+	reg = <0x0 0xfd0e0000 0x0 0x1000>,
+	      <0x0 0xfd480000 0x0 0x1000>,
+	      <0x0 0xe0000000 0x0 0x1000000>;
+	reg-names = "breg", "pcireg", "cfg";
+	ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
+
+	pcie_intc: legacy-interrupt-controller {
+		interrupt-controller;
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+	};
+
+};

Documentation/devicetree/bindings/pci/xilinx-pcie.txt

@@ -17,7 +17,7 @@ Required properties:
 	Please refer to the standard PCI bus binding document for a more
 	detailed explanation
 
-Optional properties:
+Optional properties for Zynq/Microblaze:
 - bus-range: PCI bus numbers covered
 
 Interrupt controller child node
@@ -38,13 +38,13 @@ the four INTx interrupts in ISR and route them to this domain.
 
 Example:
 ++++++++
-
+Zynq:
 	pci_express: axi-pcie@50000000 {
 		#address-cells = <3>;
 		#size-cells = <2>;
 		#interrupt-cells = <1>;
 		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x10000000 >;
+		reg = < 0x50000000 0x1000000 >;
 		device_type = "pci";
 		interrupts = < 0 52 4 >;
 		interrupt-map-mask = <0 0 0 7>;
@@ -60,3 +60,29 @@ Example:
 			#interrupt-cells = <1>;
 		};
 	};
+
+
+Microblaze:
+	pci_express: axi-pcie@10000000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		compatible = "xlnx,axi-pcie-host-1.00.a";
+		reg = <0x10000000 0x4000000>;
+		device_type = "pci";
+		interrupt-parent = <&microblaze_0_intc>;
+		interrupts = <1 2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc 1>,
+				<0 0 0 2 &pcie_intc 2>,
+				<0 0 0 3 &pcie_intc 3>,
+				<0 0 0 4 &pcie_intc 4>;
+		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
+
+		pcie_intc: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+	};

MAINTAINERS

@@ -8373,6 +8373,7 @@ L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/host-generic-pci.txt
+F:	drivers/pci/host/pci-host-common.c
 F:	drivers/pci/host/pci-host-generic.c
 
 PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
@@ -8418,6 +8419,14 @@ L:     linux-arm-msm@vger.kernel.org
 S:     Maintained
 F:     drivers/pci/host/*qcom*
 
+PCIE DRIVER FOR CAVIUM THUNDERX
+M:	David Daney <david.daney@cavium.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/pci-thunder-*
+F:	drivers/pci/host/pci-thunder-*
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org

arch/microblaze/Kconfig

@@ -267,6 +267,9 @@ config PCI
 config PCI_DOMAINS
 	def_bool PCI
 
+config PCI_DOMAINS_GENERIC
+	def_bool PCI_DOMAINS
+
 config PCI_SYSCALL
 	def_bool PCI
 

arch/microblaze/pci/pci-common.c

@@ -123,17 +123,6 @@ unsigned long pci_address_to_pio(phys_addr_t address)
 }
 EXPORT_SYMBOL_GPL(pci_address_to_pio);
 
-/*
- * Return the domain number for this bus.
- */
-int pci_domain_nr(struct pci_bus *bus)
-{
-	struct pci_controller *hose = pci_bus_to_host(bus);
-
-	return hose->global_number;
-}
-EXPORT_SYMBOL(pci_domain_nr);
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -863,26 +852,10 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 
 void pcibios_fixup_bus(struct pci_bus *bus)
 {
-	/* When called from the generic PCI probe, read PCI<->PCI bridge
-	 * bases. This is -not- called when generating the PCI tree from
-	 * the OF device-tree.
-	 */
-	if (bus->self != NULL)
-		pci_read_bridge_bases(bus);
-
-	/* Now fixup the bus bus */
-	pcibios_setup_bus_self(bus);
-
-	/* Now fixup devices on that bus */
-	pcibios_setup_bus_devices(bus);
+	/* nothing to do */
 }
 EXPORT_SYMBOL(pcibios_fixup_bus);
 
-static int skip_isa_ioresource_align(struct pci_dev *dev)
-{
-	return 0;
-}
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
@@ -899,20 +872,18 @@ static int skip_isa_ioresource_align(struct pci_dev *dev)
 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 				resource_size_t size, resource_size_t align)
 {
-	struct pci_dev *dev = data;
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (skip_isa_ioresource_align(dev))
-			return start;
-		if (start & 0x300)
-			start = (start + 0x3ff) & ~0x3ff;
-	}
-
-	return start;
+	return res->start;
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
+int pcibios_add_device(struct pci_dev *dev)
+{
+	dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
+
+	return 0;
+}
+EXPORT_SYMBOL(pcibios_add_device);
+
 /*
  * Reparent resource children of pr that conflict with res
  * under res, and make res replace those children.
@@ -1333,13 +1304,6 @@ static void pcibios_setup_phb_resources(struct pci_controller *hose,
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 }
 
-struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	return of_node_get(hose->dn);
-}
-
 static void pcibios_scan_phb(struct pci_controller *hose)
 {
 	LIST_HEAD(resources);

arch/x86/pci/vmd.c

@@ -503,6 +503,18 @@ static struct pci_ops vmd_ops = {
 	.write		= vmd_pci_write,
 };
 
+static void vmd_attach_resources(struct vmd_dev *vmd)
+{
+	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
+	vmd->dev->resource[VMD_MEMBAR2].child = &vmd->resources[2];
+}
+
+static void vmd_detach_resources(struct vmd_dev *vmd)
+{
+	vmd->dev->resource[VMD_MEMBAR1].child = NULL;
+	vmd->dev->resource[VMD_MEMBAR2].child = NULL;
+}
+
 /*
  * VMD domains start at 0x1000 to not clash with ACPI _SEG domains.
  */
@@ -527,11 +539,28 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
 	res = &vmd->dev->resource[VMD_CFGBAR];
 	vmd->resources[0] = (struct resource) {
 		.name  = "VMD CFGBAR",
-		.start = res->start,
+		.start = 0,
 		.end   = (resource_size(res) >> 20) - 1,
 		.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED,
 	};
 
+	/*
+	 * If the window is below 4GB, clear IORESOURCE_MEM_64 so we can
+	 * put 32-bit resources in the window.
+	 *
+	 * There's no hardware reason why a 64-bit window *couldn't*
+	 * contain a 32-bit resource, but pbus_size_mem() computes the
+	 * bridge window size assuming a 64-bit window will contain no
+	 * 32-bit resources.  __pci_assign_resource() enforces that
+	 * artificial restriction to make sure everything will fit.
+	 *
+	 * The only way we could use a 64-bit non-prefechable MEMBAR is
+	 * if its address is <4GB so that we can convert it to a 32-bit
+	 * resource.  To be visible to the host OS, all VMD endpoints must
+	 * be initially configured by platform BIOS, which includes setting
+	 * up these resources.  We can assume the device is configured
+	 * according to the platform needs.
+	 */
 	res = &vmd->dev->resource[VMD_MEMBAR1];
 	upper_bits = upper_32_bits(res->end);
 	flags = res->flags & ~IORESOURCE_SIZEALIGN;
@@ -542,6 +571,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
 		.start = res->start,
 		.end   = res->end,
 		.flags = flags,
+		.parent = res,
 	};
 
 	res = &vmd->dev->resource[VMD_MEMBAR2];
@@ -554,6 +584,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
 		.start = res->start + 0x2000,
 		.end   = res->end,
 		.flags = flags,
+		.parent = res,
 	};
 
 	sd->domain = vmd_find_free_domain();
@@ -578,6 +609,7 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
 		return -ENODEV;
 	}
 
+	vmd_attach_resources(vmd);
 	vmd_setup_dma_ops(vmd);
 	dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
 	pci_rescan_bus(vmd->bus);
@@ -674,6 +706,7 @@ static void vmd_remove(struct pci_dev *dev)
 {
 	struct vmd_dev *vmd = pci_get_drvdata(dev);
 
+	vmd_detach_resources(vmd);
 	pci_set_drvdata(dev, NULL);
 	sysfs_remove_link(&vmd->dev->dev.kobj, "domain");
 	pci_stop_root_bus(vmd->bus);

drivers/pci/host/Kconfig

@@ -16,6 +16,16 @@ config PCI_MVEBU
 	depends on ARCH_MVEBU || ARCH_DOVE
 	depends on OF
 
+config PCIE_XILINX_NWL
+	bool "NWL PCIe Core"
+	depends on ARCH_ZYNQMP
+	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
+	help
+	 Say 'Y' here if you want kernel support for Xilinx
+	 NWL PCIe controller. The controller can act as Root Port
+	 or End Point. The current option selection will only
+	 support root port enabling.
+
 config PCIE_DW
 	bool
 
@@ -41,7 +51,7 @@ config PCI_TEGRA
 config PCI_RCAR_GEN2
 	bool "Renesas R-Car Gen2 Internal PCI controller"
 	depends on ARM
-	depends on ARCH_SHMOBILE || COMPILE_TEST
+	depends on ARCH_RENESAS || COMPILE_TEST
 	help
 	  Say Y here if you want internal PCI support on R-Car Gen2 SoC.
 	  There are 3 internal PCI controllers available with a single
@@ -49,13 +59,17 @@ config PCI_RCAR_GEN2
 
 config PCI_RCAR_GEN2_PCIE
 	bool "Renesas R-Car PCIe controller"
-	depends on ARCH_SHMOBILE || (ARM && COMPILE_TEST)
+	depends on ARCH_RENESAS || (ARM && COMPILE_TEST)
 	help
 	  Say Y here if you want PCIe controller support on R-Car Gen2 SoCs.
 
+config PCI_HOST_COMMON
+	bool
+
 config PCI_HOST_GENERIC
 	bool "Generic PCI host controller"
 	depends on (ARM || ARM64) && OF
+	select PCI_HOST_COMMON
 	help
 	  Say Y here if you want to support a simple generic PCI host
 	  controller, such as the one emulated by kvmtool.
@@ -81,7 +95,7 @@ config PCI_KEYSTONE
 
 config PCIE_XILINX
 	bool "Xilinx AXI PCIe host bridge support"
-	depends on ARCH_ZYNQ
+	depends on ARCH_ZYNQ || MICROBLAZE
 	help
 	  Say 'Y' here if you want kernel to support the Xilinx AXI PCIe
 	  Host Bridge driver.
@@ -191,4 +205,18 @@ config PCIE_QCOM
 	  PCIe controller uses the Designware core plus Qualcomm-specific
 	  hardware wrappers.
 
+config PCI_HOST_THUNDER_PEM
+	bool "Cavium Thunder PCIe controller to off-chip devices"
+	depends on OF && ARM64
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs.
+
+config PCI_HOST_THUNDER_ECAM
+	bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon"
+	depends on OF && ARM64
+	select PCI_HOST_COMMON
+	help
+	  Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs.
+
 endmenu

drivers/pci/host/Makefile

@@ -6,10 +6,12 @@ obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
 obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
 obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
+obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
 obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
+obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
 obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
 obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
@@ -22,3 +24,5 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
+obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o

drivers/pci/host/pci-host-common.c

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2014 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+static void gen_pci_release_of_pci_ranges(struct gen_pci *pci)
+{
+	pci_free_resource_list(&pci->resources);
+}
+
+static int gen_pci_parse_request_of_pci_ranges(struct gen_pci *pci)
+{
+	int err, res_valid = 0;
+	struct device *dev = pci->host.dev.parent;
+	struct device_node *np = dev->of_node;
+	resource_size_t iobase;
+	struct resource_entry *win;
+
+	err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
+					       &iobase);
+	if (err)
+		return err;
+
+	resource_list_for_each_entry(win, &pci->resources) {
+		struct resource *parent, *res = win->res;
+
+		switch (resource_type(res)) {
+		case IORESOURCE_IO:
+			parent = &ioport_resource;
+			err = pci_remap_iospace(res, iobase);
+			if (err) {
+				dev_warn(dev, "error %d: failed to map resource %pR\n",
+					 err, res);
+				continue;
+			}
+			break;
+		case IORESOURCE_MEM:
+			parent = &iomem_resource;
+			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
+			break;
+		case IORESOURCE_BUS:
+			pci->cfg.bus_range = res;
+		default:
+			continue;
+		}
+
+		err = devm_request_resource(dev, parent, res);
+		if (err)
+			goto out_release_res;
+	}
+
+	if (!res_valid) {
+		dev_err(dev, "non-prefetchable memory resource required\n");
+		err = -EINVAL;
+		goto out_release_res;
+	}
+
+	return 0;
+
+out_release_res:
+	gen_pci_release_of_pci_ranges(pci);
+	return err;
+}
+
+static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
+{
+	int err;
+	u8 bus_max;
+	resource_size_t busn;
+	struct resource *bus_range;
+	struct device *dev = pci->host.dev.parent;
+	struct device_node *np = dev->of_node;
+	u32 sz = 1 << pci->cfg.ops->bus_shift;
+
+	err = of_address_to_resource(np, 0, &pci->cfg.res);
+	if (err) {
+		dev_err(dev, "missing \"reg\" property\n");
+		return err;
+	}
+
+	/* Limit the bus-range to fit within reg */
+	bus_max = pci->cfg.bus_range->start +
+		  (resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1;
+	pci->cfg.bus_range->end = min_t(resource_size_t,
+					pci->cfg.bus_range->end, bus_max);
+
+	pci->cfg.win = devm_kcalloc(dev, resource_size(pci->cfg.bus_range),
+				    sizeof(*pci->cfg.win), GFP_KERNEL);
+	if (!pci->cfg.win)
+		return -ENOMEM;
+
+	/* Map our Configuration Space windows */
+	if (!devm_request_mem_region(dev, pci->cfg.res.start,
+				     resource_size(&pci->cfg.res),
+				     "Configuration Space"))
+		return -ENOMEM;
+
+	bus_range = pci->cfg.bus_range;
+	for (busn = bus_range->start; busn <= bus_range->end; ++busn) {
+		u32 idx = busn - bus_range->start;
+
+		pci->cfg.win[idx] = devm_ioremap(dev,
+						 pci->cfg.res.start + idx * sz,
+						 sz);
+		if (!pci->cfg.win[idx])
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+
+int pci_host_common_probe(struct platform_device *pdev,
+			  struct gen_pci *pci)
+{
+	int err;
+	const char *type;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct pci_bus *bus, *child;
+
+	type = of_get_property(np, "device_type", NULL);
+	if (!type || strcmp(type, "pci")) {
+		dev_err(dev, "invalid \"device_type\" %s\n", type);
+		return -EINVAL;
+	}
+
+	of_pci_check_probe_only();
+
+	pci->host.dev.parent = dev;
+	INIT_LIST_HEAD(&pci->host.windows);
+	INIT_LIST_HEAD(&pci->resources);
+
+	/* Parse our PCI ranges and request their resources */
+	err = gen_pci_parse_request_of_pci_ranges(pci);
+	if (err)
+		return err;
+
+	/* Parse and map our Configuration Space windows */
+	err = gen_pci_parse_map_cfg_windows(pci);
+	if (err) {
+		gen_pci_release_of_pci_ranges(pci);
+		return err;
+	}
+
+	/* Do not reassign resources if probe only */
+	if (!pci_has_flag(PCI_PROBE_ONLY))
+		pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
+
+
+	bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
+				&pci->cfg.ops->ops, pci, &pci->resources);
+	if (!bus) {
+		dev_err(dev, "Scanning rootbus failed");
+		return -ENODEV;
+	}
+
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+
+	if (!pci_has_flag(PCI_PROBE_ONLY)) {
+		pci_bus_size_bridges(bus);
+		pci_bus_assign_resources(bus);
+
+		list_for_each_entry(child, &bus->children, node)
+			pcie_bus_configure_settings(child);
+	}
+
+	pci_bus_add_devices(bus);
+	return 0;
+}
+
+MODULE_DESCRIPTION("Generic PCI host driver common code");
+MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");
+MODULE_LICENSE("GPL v2");

drivers/pci/host/pci-host-common.h

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2014 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#ifndef _PCI_HOST_COMMON_H
+#define _PCI_HOST_COMMON_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+struct gen_pci_cfg_bus_ops {
+	u32 bus_shift;
+	struct pci_ops ops;
+};
+
+struct gen_pci_cfg_windows {
+	struct resource				res;
+	struct resource				*bus_range;
+	void __iomem				**win;
+
+	struct gen_pci_cfg_bus_ops		*ops;
+};
+
+struct gen_pci {
+	struct pci_host_bridge			host;
+	struct gen_pci_cfg_windows		cfg;
+	struct list_head			resources;
+};
+
+int pci_host_common_probe(struct platform_device *pdev,
+			  struct gen_pci *pci);
+
+#endif /* _PCI_HOST_COMMON_H */

drivers/pci/host/pci-host-generic.c

@@ -25,24 +25,7 @@
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 
-struct gen_pci_cfg_bus_ops {
-	u32 bus_shift;
-	struct pci_ops ops;
-};
-
-struct gen_pci_cfg_windows {
-	struct resource				res;
-	struct resource				*bus_range;
-	void __iomem				**win;
-
-	struct gen_pci_cfg_bus_ops		*ops;
-};
-
-struct gen_pci {
-	struct pci_host_bridge			host;
-	struct gen_pci_cfg_windows		cfg;
-	struct list_head			resources;
-};
+#include "pci-host-common.h"
 
 static void __iomem *gen_pci_map_cfg_bus_cam(struct pci_bus *bus,
 					     unsigned int devfn,
@@ -93,175 +76,19 @@ static const struct of_device_id gen_pci_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, gen_pci_of_match);
 
-static void gen_pci_release_of_pci_ranges(struct gen_pci *pci)
-{
-	pci_free_resource_list(&pci->resources);
-}
-
-static int gen_pci_parse_request_of_pci_ranges(struct gen_pci *pci)
-{
-	int err, res_valid = 0;
-	struct device *dev = pci->host.dev.parent;
-	struct device_node *np = dev->of_node;
-	resource_size_t iobase;
-	struct resource_entry *win;
-
-	err = of_pci_get_host_bridge_resources(np, 0, 0xff, &pci->resources,
-					       &iobase);
-	if (err)
-		return err;
-
-	resource_list_for_each_entry(win, &pci->resources) {
-		struct resource *parent, *res = win->res;
-
-		switch (resource_type(res)) {
-		case IORESOURCE_IO:
-			parent = &ioport_resource;
-			err = pci_remap_iospace(res, iobase);
-			if (err) {
-				dev_warn(dev, "error %d: failed to map resource %pR\n",
-					 err, res);
-				continue;
-			}
-			break;
-		case IORESOURCE_MEM:
-			parent = &iomem_resource;
-			res_valid |= !(res->flags & IORESOURCE_PREFETCH);
-			break;
-		case IORESOURCE_BUS:
-			pci->cfg.bus_range = res;
-		default:
-			continue;
-		}
-
-		err = devm_request_resource(dev, parent, res);
-		if (err)
-			goto out_release_res;
-	}
-
-	if (!res_valid) {
-		dev_err(dev, "non-prefetchable memory resource required\n");
-		err = -EINVAL;
-		goto out_release_res;
-	}
-
-	return 0;
-
-out_release_res:
-	gen_pci_release_of_pci_ranges(pci);
-	return err;
-}
-
-static int gen_pci_parse_map_cfg_windows(struct gen_pci *pci)
-{
-	int err;
-	u8 bus_max;
-	resource_size_t busn;
-	struct resource *bus_range;
-	struct device *dev = pci->host.dev.parent;
-	struct device_node *np = dev->of_node;
-	u32 sz = 1 << pci->cfg.ops->bus_shift;
-
-	err = of_address_to_resource(np, 0, &pci->cfg.res);
-	if (err) {
-		dev_err(dev, "missing \"reg\" property\n");
-		return err;
-	}
-
-	/* Limit the bus-range to fit within reg */
-	bus_max = pci->cfg.bus_range->start +
-		  (resource_size(&pci->cfg.res) >> pci->cfg.ops->bus_shift) - 1;
-	pci->cfg.bus_range->end = min_t(resource_size_t,
-					pci->cfg.bus_range->end, bus_max);
-
-	pci->cfg.win = devm_kcalloc(dev, resource_size(pci->cfg.bus_range),
-				    sizeof(*pci->cfg.win), GFP_KERNEL);
-	if (!pci->cfg.win)
-		return -ENOMEM;
-
-	/* Map our Configuration Space windows */
-	if (!devm_request_mem_region(dev, pci->cfg.res.start,
-				     resource_size(&pci->cfg.res),
-				     "Configuration Space"))
-		return -ENOMEM;
-
-	bus_range = pci->cfg.bus_range;
-	for (busn = bus_range->start; busn <= bus_range->end; ++busn) {
-		u32 idx = busn - bus_range->start;
-
-		pci->cfg.win[idx] = devm_ioremap(dev,
-						 pci->cfg.res.start + idx * sz,
-						 sz);
-		if (!pci->cfg.win[idx])
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-
 static int gen_pci_probe(struct platform_device *pdev)
 {
-	int err;
-	const char *type;
-	const struct of_device_id *of_id;
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
+	const struct of_device_id *of_id;
 	struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
-	struct pci_bus *bus, *child;
 
 	if (!pci)
 		return -ENOMEM;
 
-	type = of_get_property(np, "device_type", NULL);
-	if (!type || strcmp(type, "pci")) {
-		dev_err(dev, "invalid \"device_type\" %s\n", type);
-		return -EINVAL;
-	}
-
-	of_pci_check_probe_only();
-
-	of_id = of_match_node(gen_pci_of_match, np);
+	of_id = of_match_node(gen_pci_of_match, dev->of_node);
 	pci->cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
-	pci->host.dev.parent = dev;
-	INIT_LIST_HEAD(&pci->host.windows);
-	INIT_LIST_HEAD(&pci->resources);
-
-	/* Parse our PCI ranges and request their resources */
-	err = gen_pci_parse_request_of_pci_ranges(pci);
-	if (err)
-		return err;
-
-	/* Parse and map our Configuration Space windows */
-	err = gen_pci_parse_map_cfg_windows(pci);
-	if (err) {
-		gen_pci_release_of_pci_ranges(pci);
-		return err;
-	}
-
-	/* Do not reassign resources if probe only */
-	if (!pci_has_flag(PCI_PROBE_ONLY))
-		pci_add_flags(PCI_REASSIGN_ALL_RSRC | PCI_REASSIGN_ALL_BUS);
-
-
-	bus = pci_scan_root_bus(dev, pci->cfg.bus_range->start,
-				&pci->cfg.ops->ops, pci, &pci->resources);
-	if (!bus) {
-		dev_err(dev, "Scanning rootbus failed");
-		return -ENODEV;
-	}
-
-	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
-
-	if (!pci_has_flag(PCI_PROBE_ONLY)) {
-		pci_bus_size_bridges(bus);
-		pci_bus_assign_resources(bus);
-
-		list_for_each_entry(child, &bus->children, node)
-			pcie_bus_configure_settings(child);
-	}
 
-	pci_bus_add_devices(bus);
-	return 0;
+	return pci_host_common_probe(pdev, pci);
 }
 
 static struct platform_driver gen_pci_driver = {

drivers/pci/host/pci-imx6.c

@@ -39,6 +39,11 @@ struct imx6_pcie {
 	struct pcie_port	pp;
 	struct regmap		*iomuxc_gpr;
 	void __iomem		*mem_base;
+	u32			tx_deemph_gen1;
+	u32			tx_deemph_gen2_3p5db;
+	u32			tx_deemph_gen2_6db;
+	u32			tx_swing_full;
+	u32			tx_swing_low;
 };
 
 /* PCIe Root Complex registers (memory-mapped) */
@@ -334,15 +339,20 @@ static void imx6_pcie_init_phy(struct pcie_port *pp)
 			IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
 
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
+			   IMX6Q_GPR8_TX_DEEMPH_GEN1,
+			   imx6_pcie->tx_deemph_gen1 << 0);
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
+			   IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB,
+			   imx6_pcie->tx_deemph_gen2_3p5db << 6);
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
+			   IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB,
+			   imx6_pcie->tx_deemph_gen2_6db << 12);
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
+			   IMX6Q_GPR8_TX_SWING_FULL,
+			   imx6_pcie->tx_swing_full << 18);
 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-			IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
+			   IMX6Q_GPR8_TX_SWING_LOW,
+			   imx6_pcie->tx_swing_low << 25);
 }
 
 static int imx6_pcie_wait_for_link(struct pcie_port *pp)
@@ -533,6 +543,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
 	struct imx6_pcie *imx6_pcie;
 	struct pcie_port *pp;
 	struct resource *dbi_base;
+	struct device_node *node = pdev->dev.of_node;
 	int ret;
 
 	imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
@@ -585,6 +596,27 @@ static int __init imx6_pcie_probe(struct platform_device *pdev)
 		return PTR_ERR(imx6_pcie->iomuxc_gpr);
 	}
 
+	/* Grab PCIe PHY Tx Settings */
+	if (of_property_read_u32(node, "fsl,tx-deemph-gen1",
+				 &imx6_pcie->tx_deemph_gen1))
+		imx6_pcie->tx_deemph_gen1 = 0;
+
+	if (of_property_read_u32(node, "fsl,tx-deemph-gen2-3p5db",
+				 &imx6_pcie->tx_deemph_gen2_3p5db))
+		imx6_pcie->tx_deemph_gen2_3p5db = 0;
+
+	if (of_property_read_u32(node, "fsl,tx-deemph-gen2-6db",
+				 &imx6_pcie->tx_deemph_gen2_6db))
+		imx6_pcie->tx_deemph_gen2_6db = 20;
+
+	if (of_property_read_u32(node, "fsl,tx-swing-full",
+				 &imx6_pcie->tx_swing_full))
+		imx6_pcie->tx_swing_full = 127;
+
+	if (of_property_read_u32(node, "fsl,tx-swing-low",
+				 &imx6_pcie->tx_swing_low))
+		imx6_pcie->tx_swing_low = 127;
+
 	ret = imx6_add_pcie_port(pp, pdev);
 	if (ret < 0)
 		return ret;

drivers/pci/host/pci-keystone.c

@@ -359,6 +359,9 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 
 	/* initialize SerDes Phy if present */
 	phy = devm_phy_get(dev, "pcie-phy");
+	if (PTR_ERR_OR_ZERO(phy) == -EPROBE_DEFER)
+		return PTR_ERR(phy);
+
 	if (!IS_ERR_OR_NULL(phy)) {
 		ret = phy_init(phy);
 		if (ret < 0)

drivers/pci/host/pci-tegra.c

@@ -281,6 +281,11 @@ struct tegra_pcie {
 	struct resource prefetch;
 	struct resource busn;
 
+	struct {
+		resource_size_t mem;
+		resource_size_t io;
+	} offset;
+
 	struct clk *pex_clk;
 	struct clk *afi_clk;
 	struct clk *pll_e;
@@ -295,7 +300,6 @@ struct tegra_pcie {
 	struct tegra_msi msi;
 
 	struct list_head ports;
-	unsigned int num_ports;
 	u32 xbar_config;
 
 	struct regulator_bulk_data *supplies;
@@ -426,29 +430,36 @@ static struct tegra_pcie_bus *tegra_pcie_bus_alloc(struct tegra_pcie *pcie,
 	return ERR_PTR(err);
 }
 
-/*
- * Look up a virtual address mapping for the specified bus number. If no such
- * mapping exists, try to create one.
- */
-static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
-					unsigned int busnr)
+static int tegra_pcie_add_bus(struct pci_bus *bus)
 {
-	struct tegra_pcie_bus *bus;
+	struct tegra_pcie *pcie = sys_to_pcie(bus->sysdata);
+	struct tegra_pcie_bus *b;
 
-	list_for_each_entry(bus, &pcie->buses, list)
-		if (bus->nr == busnr)
-			return (void __iomem *)bus->area->addr;
+	b = tegra_pcie_bus_alloc(pcie, bus->number);
+	if (IS_ERR(b))
+		return PTR_ERR(b);
 
-	bus = tegra_pcie_bus_alloc(pcie, busnr);
-	if (IS_ERR(bus))
-		return NULL;
+	list_add_tail(&b->list, &pcie->buses);
 
-	list_add_tail(&bus->list, &pcie->buses);
+	return 0;
+}
+
+static void tegra_pcie_remove_bus(struct pci_bus *child)
+{
+	struct tegra_pcie *pcie = sys_to_pcie(child->sysdata);
+	struct tegra_pcie_bus *bus, *tmp;
 
-	return (void __iomem *)bus->area->addr;
+	list_for_each_entry_safe(bus, tmp, &pcie->buses, list) {
+		if (bus->nr == child->number) {
+			vunmap(bus->area->addr);
+			list_del(&bus->list);
+			kfree(bus);
+			break;
+		}
+	}
 }
 
-static void __iomem *tegra_pcie_conf_address(struct pci_bus *bus,
+static void __iomem *tegra_pcie_map_bus(struct pci_bus *bus,
 					unsigned int devfn,
 					int where)
 {
@@ -466,7 +477,12 @@ static void __iomem *tegra_pcie_conf_address(struct pci_bus *bus,
 			}
 		}
 	} else {
-		addr = tegra_pcie_bus_map(pcie, bus->number);
+		struct tegra_pcie_bus *b;
+
+		list_for_each_entry(b, &pcie->buses, list)
+			if (b->nr == bus->number)
+				addr = (void __iomem *)b->area->addr;
+
 		if (!addr) {
 			dev_err(pcie->dev,
 				"failed to map cfg. space for bus %u\n",
@@ -481,7 +497,9 @@ static void __iomem *tegra_pcie_conf_address(struct pci_bus *bus,
 }
 
 static struct pci_ops tegra_pcie_ops = {
-	.map_bus = tegra_pcie_conf_address,
+	.add_bus = tegra_pcie_add_bus,
+	.remove_bus = tegra_pcie_remove_bus,
+	.map_bus = tegra_pcie_map_bus,
 	.read = pci_generic_config_read32,
 	.write = pci_generic_config_write32,
 };
@@ -598,6 +616,17 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	struct tegra_pcie *pcie = sys_to_pcie(sys);
 	int err;
 
+	sys->mem_offset = pcie->offset.mem;
+	sys->io_offset = pcie->offset.io;
+
+	err = devm_request_resource(pcie->dev, &pcie->all, &pcie->io);
+	if (err < 0)
+		return err;
+
+	err = devm_request_resource(pcie->dev, &ioport_resource, &pcie->pio);
+	if (err < 0)
+		return err;
+
 	err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
 	if (err < 0)
 		return err;
@@ -606,6 +635,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 	if (err)
 		return err;
 
+	pci_add_resource_offset(&sys->resources, &pcie->pio, sys->io_offset);
 	pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
 	pci_add_resource_offset(&sys->resources, &pcie->prefetch,
 				sys->mem_offset);
@@ -741,7 +771,7 @@ static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
 	afi_writel(pcie, 0, AFI_FPCI_BAR5);
 
 	/* map all upstream transactions as uncached */
-	afi_writel(pcie, PHYS_OFFSET, AFI_CACHE_BAR0_ST);
+	afi_writel(pcie, 0, AFI_CACHE_BAR0_ST);
 	afi_writel(pcie, 0, AFI_CACHE_BAR0_SZ);
 	afi_writel(pcie, 0, AFI_CACHE_BAR1_ST);
 	afi_writel(pcie, 0, AFI_CACHE_BAR1_SZ);
@@ -1601,6 +1631,9 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 
 		switch (res.flags & IORESOURCE_TYPE_BITS) {
 		case IORESOURCE_IO:
+			/* Track the bus -> CPU I/O mapping offset. */
+			pcie->offset.io = res.start - range.pci_addr;
+
 			memcpy(&pcie->pio, &res, sizeof(res));
 			pcie->pio.name = np->full_name;
 
@@ -1621,6 +1654,14 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 			break;
 
 		case IORESOURCE_MEM:
+			/*
+			 * Track the bus -> CPU memory mapping offset. This
+			 * assumes that the prefetchable and non-prefetchable
+			 * regions will be the last of type IORESOURCE_MEM in
+			 * the ranges property.
+			 * */
+			pcie->offset.mem = res.start - range.pci_addr;
+
 			if (res.flags & IORESOURCE_PREFETCH) {
 				memcpy(&pcie->prefetch, &res, sizeof(res));
 				pcie->prefetch.name = "prefetchable";

drivers/pci/host/pci-thunder-ecam.c

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2015, 2016 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/of_pci.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+/* Mapping is standard ECAM */
+static void __iomem *thunder_ecam_map_bus(struct pci_bus *bus,
+					  unsigned int devfn,
+					  int where)
+{
+	struct gen_pci *pci = bus->sysdata;
+	resource_size_t idx = bus->number - pci->cfg.bus_range->start;
+
+	return pci->cfg.win[idx] + ((devfn << 12) | where);
+}
+
+static void set_val(u32 v, int where, int size, u32 *val)
+{
+	int shift = (where & 3) * 8;
+
+	pr_debug("set_val %04x: %08x\n", (unsigned)(where & ~3), v);
+	v >>= shift;
+	if (size == 1)
+		v &= 0xff;
+	else if (size == 2)
+		v &= 0xffff;
+	*val = v;
+}
+
+static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus,
+			 unsigned int devfn, int where, int size, u32 *val)
+{
+	void __iomem *addr;
+	u32 v;
+
+	/* Entries are 16-byte aligned; bits[2,3] select word in entry */
+	int where_a = where & 0xc;
+
+	if (where_a == 0) {
+		set_val(e0, where, size, val);
+		return PCIBIOS_SUCCESSFUL;
+	}
+	if (where_a == 0x4) {
+		addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */
+		if (!addr) {
+			*val = ~0;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+		v = readl(addr);
+		v &= ~0xf;
+		v |= 2; /* EA entry-1. Base-L */
+		set_val(v, where, size, val);
+		return PCIBIOS_SUCCESSFUL;
+	}
+	if (where_a == 0x8) {
+		u32 barl_orig;
+		u32 barl_rb;
+
+		addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */
+		if (!addr) {
+			*val = ~0;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+		barl_orig = readl(addr + 0);
+		writel(0xffffffff, addr + 0);
+		barl_rb = readl(addr + 0);
+		writel(barl_orig, addr + 0);
+		/* zeros in unsettable bits */
+		v = ~barl_rb & ~3;
+		v |= 0xc; /* EA entry-2. Offset-L */
+		set_val(v, where, size, val);
+		return PCIBIOS_SUCCESSFUL;
+	}
+	if (where_a == 0xc) {
+		addr = bus->ops->map_bus(bus, devfn, bar + 4); /* BAR 1 */
+		if (!addr) {
+			*val = ~0;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+		v = readl(addr); /* EA entry-3. Base-H */
+		set_val(v, where, size, val);
+		return PCIBIOS_SUCCESSFUL;
+	}
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn,
+				       int where, int size, u32 *val)
+{
+	struct gen_pci *pci = bus->sysdata;
+	int where_a = where & ~3;
+	void __iomem *addr;
+	u32 node_bits;
+	u32 v;
+
+	/* EA Base[63:32] may be missing some bits ... */
+	switch (where_a) {
+	case 0xa8:
+	case 0xbc:
+	case 0xd0:
+	case 0xe4:
+		break;
+	default:
+		return pci_generic_config_read(bus, devfn, where, size, val);
+	}
+
+	addr = bus->ops->map_bus(bus, devfn, where_a);
+	if (!addr) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	v = readl(addr);
+
+	/*
+	 * Bit 44 of the 64-bit Base must match the same bit in
+	 * the config space access window.  Since we are working with
+	 * the high-order 32 bits, shift everything down by 32 bits.
+	 */
+	node_bits = (pci->cfg.res.start >> 32) & (1 << 12);
+
+	v |= node_bits;
+	set_val(v, where, size, val);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 *val)
+{
+	u32 v;
+	u32 vendor_device;
+	u32 class_rev;
+	void __iomem *addr;
+	int cfg_type;
+	int where_a = where & ~3;
+
+	addr = bus->ops->map_bus(bus, devfn, 0xc);
+	if (!addr) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	v = readl(addr);
+
+	/* Check for non type-00 header */
+	cfg_type = (v >> 16) & 0x7f;
+
+	addr = bus->ops->map_bus(bus, devfn, 8);
+	if (!addr) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	class_rev = readl(addr);
+	if (class_rev == 0xffffffff)
+		goto no_emulation;
+
+	if ((class_rev & 0xff) >= 8) {
+		/* Pass-2 handling */
+		if (cfg_type)
+			goto no_emulation;
+		return thunder_ecam_p2_config_read(bus, devfn, where,
+						   size, val);
+	}
+
+	/*
+	 * All BARs have fixed addresses specified by the EA
+	 * capability; they must return zero on read.
+	 */
+	if (cfg_type == 0 &&
+	    ((where >= 0x10 && where < 0x2c) ||
+	     (where >= 0x1a4 && where < 0x1bc))) {
+		/* BAR or SR-IOV BAR */
+		*val = 0;
+		return PCIBIOS_SUCCESSFUL;
+	}
+
+	addr = bus->ops->map_bus(bus, devfn, 0);
+	if (!addr) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	vendor_device = readl(addr);
+	if (vendor_device == 0xffffffff)
+		goto no_emulation;
+
+	pr_debug("%04x:%04x - Fix pass#: %08x, where: %03x, devfn: %03x\n",
+		 vendor_device & 0xffff, vendor_device >> 16, class_rev,
+		 (unsigned) where, devfn);
+
+	/* Check for non type-00 header */
+	if (cfg_type == 0) {
+		bool has_msix;
+		bool is_nic = (vendor_device == 0xa01e177d);
+		bool is_tns = (vendor_device == 0xa01f177d);
+
+		addr = bus->ops->map_bus(bus, devfn, 0x70);
+		if (!addr) {
+			*val = ~0;
+			return PCIBIOS_DEVICE_NOT_FOUND;
+		}
+		/* E_CAP */
+		v = readl(addr);
+		has_msix = (v & 0xff00) != 0;
+
+		if (!has_msix && where_a == 0x70) {
+			v |= 0xbc00; /* next capability is EA at 0xbc */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xb0) {
+			addr = bus->ops->map_bus(bus, devfn, where_a);
+			if (!addr) {
+				*val = ~0;
+				return PCIBIOS_DEVICE_NOT_FOUND;
+			}
+			v = readl(addr);
+			if (v & 0xff00)
+				pr_err("Bad MSIX cap header: %08x\n", v);
+			v |= 0xbc00; /* next capability is EA at 0xbc */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xbc) {
+			if (is_nic)
+				v = 0x40014; /* EA last in chain, 4 entries */
+			else if (is_tns)
+				v = 0x30014; /* EA last in chain, 3 entries */
+			else if (has_msix)
+				v = 0x20014; /* EA last in chain, 2 entries */
+			else
+				v = 0x10014; /* EA last in chain, 1 entry */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a >= 0xc0 && where_a < 0xd0)
+			/* EA entry-0. PP=0, BAR0 Size:3 */
+			return handle_ea_bar(0x80ff0003,
+					     0x10, bus, devfn, where,
+					     size, val);
+		if (where_a >= 0xd0 && where_a < 0xe0 && has_msix)
+			 /* EA entry-1. PP=0, BAR4 Size:3 */
+			return handle_ea_bar(0x80ff0043,
+					     0x20, bus, devfn, where,
+					     size, val);
+		if (where_a >= 0xe0 && where_a < 0xf0 && is_tns)
+			/* EA entry-2. PP=0, BAR2, Size:3 */
+			return handle_ea_bar(0x80ff0023,
+					     0x18, bus, devfn, where,
+					     size, val);
+		if (where_a >= 0xe0 && where_a < 0xf0 && is_nic)
+			/* EA entry-2. PP=4, VF_BAR0 (9), Size:3 */
+			return handle_ea_bar(0x80ff0493,
+					     0x1a4, bus, devfn, where,
+					     size, val);
+		if (where_a >= 0xf0 && where_a < 0x100 && is_nic)
+			/* EA entry-3. PP=4, VF_BAR4 (d), Size:3 */
+			return handle_ea_bar(0x80ff04d3,
+					     0x1b4, bus, devfn, where,
+					     size, val);
+	} else if (cfg_type == 1) {
+		bool is_rsl_bridge = devfn == 0x08;
+		bool is_rad_bridge = devfn == 0xa0;
+		bool is_zip_bridge = devfn == 0xa8;
+		bool is_dfa_bridge = devfn == 0xb0;
+		bool is_nic_bridge = devfn == 0x10;
+
+		if (where_a == 0x70) {
+			addr = bus->ops->map_bus(bus, devfn, where_a);
+			if (!addr) {
+				*val = ~0;
+				return PCIBIOS_DEVICE_NOT_FOUND;
+			}
+			v = readl(addr);
+			if (v & 0xff00)
+				pr_err("Bad PCIe cap header: %08x\n", v);
+			v |= 0xbc00; /* next capability is EA at 0xbc */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xbc) {
+			if (is_nic_bridge)
+				v = 0x10014; /* EA last in chain, 1 entry */
+			else
+				v = 0x00014; /* EA last in chain, no entries */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xc0) {
+			if (is_rsl_bridge || is_nic_bridge)
+				v = 0x0101; /* subordinate:secondary = 1:1 */
+			else if (is_rad_bridge)
+				v = 0x0202; /* subordinate:secondary = 2:2 */
+			else if (is_zip_bridge)
+				v = 0x0303; /* subordinate:secondary = 3:3 */
+			else if (is_dfa_bridge)
+				v = 0x0404; /* subordinate:secondary = 4:4 */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xc4 && is_nic_bridge) {
+			/* Enabled, not-Write, SP=ff, PP=05, BEI=6, ES=4 */
+			v = 0x80ff0564;
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xc8 && is_nic_bridge) {
+			v = 0x00000002; /* Base-L 64-bit */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xcc && is_nic_bridge) {
+			v = 0xfffffffe; /* MaxOffset-L 64-bit */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xd0 && is_nic_bridge) {
+			v = 0x00008430; /* NIC Base-H */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+		if (where_a == 0xd4 && is_nic_bridge) {
+			v = 0x0000000f; /* MaxOffset-H */
+			set_val(v, where, size, val);
+			return PCIBIOS_SUCCESSFUL;
+		}
+	}
+no_emulation:
+	return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn,
+				     int where, int size, u32 val)
+{
+	/*
+	 * All BARs have fixed addresses; ignore BAR writes so they
+	 * don't get corrupted.
+	 */
+	if ((where >= 0x10 && where < 0x2c) ||
+	    (where >= 0x1a4 && where < 0x1bc))
+		/* BAR or SR-IOV BAR */
+		return PCIBIOS_SUCCESSFUL;
+
+	return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static struct gen_pci_cfg_bus_ops thunder_ecam_bus_ops = {
+	.bus_shift	= 20,
+	.ops		= {
+		.map_bus        = thunder_ecam_map_bus,
+		.read           = thunder_ecam_config_read,
+		.write          = thunder_ecam_config_write,
+	}
+};
+
+static const struct of_device_id thunder_ecam_of_match[] = {
+	{ .compatible = "cavium,pci-host-thunder-ecam",
+	  .data = &thunder_ecam_bus_ops },
+
+	{ },
+};
+MODULE_DEVICE_TABLE(of, thunder_ecam_of_match);
+
+static int thunder_ecam_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
+
+	if (!pci)
+		return -ENOMEM;
+
+	of_id = of_match_node(thunder_ecam_of_match, dev->of_node);
+	pci->cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
+
+	return pci_host_common_probe(pdev, pci);
+}
+
+static struct platform_driver thunder_ecam_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = thunder_ecam_of_match,
+	},
+	.probe = thunder_ecam_probe,
+};
+module_platform_driver(thunder_ecam_driver);
+
+MODULE_DESCRIPTION("Thunder ECAM PCI host driver");
+MODULE_LICENSE("GPL v2");

drivers/pci/host/pci-thunder-pem.c

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2015 - 2016 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+
+#include "pci-host-common.h"
+
+#define PEM_CFG_WR 0x28
+#define PEM_CFG_RD 0x30
+
+struct thunder_pem_pci {
+	struct gen_pci	gen_pci;
+	u32		ea_entry[3];
+	void __iomem	*pem_reg_base;
+};
+
+static void __iomem *thunder_pem_map_bus(struct pci_bus *bus,
+					 unsigned int devfn, int where)
+{
+	struct gen_pci *pci = bus->sysdata;
+	resource_size_t idx = bus->number - pci->cfg.bus_range->start;
+
+	return pci->cfg.win[idx] + ((devfn << 16) | where);
+}
+
+static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 *val)
+{
+	u64 read_val;
+	struct thunder_pem_pci *pem_pci;
+	struct gen_pci *pci = bus->sysdata;
+
+	pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+
+	if (devfn != 0 || where >= 2048) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/*
+	 * 32-bit accesses only.  Write the address to the low order
+	 * bits of PEM_CFG_RD, then trigger the read by reading back.
+	 * The config data lands in the upper 32-bits of PEM_CFG_RD.
+	 */
+	read_val = where & ~3ull;
+	writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+	read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+	read_val >>= 32;
+
+	/*
+	 * The config space contains some garbage, fix it up.  Also
+	 * synthesize an EA capability for the BAR used by MSI-X.
+	 */
+	switch (where & ~3) {
+	case 0x40:
+		read_val &= 0xffff00ff;
+		read_val |= 0x00007000; /* Skip MSI CAP */
+		break;
+	case 0x70: /* Express Cap */
+		/* PME interrupt on vector 2*/
+		read_val |= (2u << 25);
+		break;
+	case 0xb0: /* MSI-X Cap */
+		/* TableSize=4, Next Cap is EA */
+		read_val &= 0xc00000ff;
+		read_val |= 0x0003bc00;
+		break;
+	case 0xb4:
+		/* Table offset=0, BIR=0 */
+		read_val = 0x00000000;
+		break;
+	case 0xb8:
+		/* BPA offset=0xf0000, BIR=0 */
+		read_val = 0x000f0000;
+		break;
+	case 0xbc:
+		/* EA, 1 entry, no next Cap */
+		read_val = 0x00010014;
+		break;
+	case 0xc0:
+		/* DW2 for type-1 */
+		read_val = 0x00000000;
+		break;
+	case 0xc4:
+		/* Entry BEI=0, PP=0x00, SP=0xff, ES=3 */
+		read_val = 0x80ff0003;
+		break;
+	case 0xc8:
+		read_val = pem_pci->ea_entry[0];
+		break;
+	case 0xcc:
+		read_val = pem_pci->ea_entry[1];
+		break;
+	case 0xd0:
+		read_val = pem_pci->ea_entry[2];
+		break;
+	default:
+		break;
+	}
+	read_val >>= (8 * (where & 3));
+	switch (size) {
+	case 1:
+		read_val &= 0xff;
+		break;
+	case 2:
+		read_val &= 0xffff;
+		break;
+	default:
+		break;
+	}
+	*val = read_val;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 *val)
+{
+	struct gen_pci *pci = bus->sysdata;
+
+	if (bus->number < pci->cfg.bus_range->start ||
+	    bus->number > pci->cfg.bus_range->end)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * The first device on the bus is the PEM PCIe bridge.
+	 * Special case its config access.
+	 */
+	if (bus->number == pci->cfg.bus_range->start)
+		return thunder_pem_bridge_read(bus, devfn, where, size, val);
+
+	return pci_generic_config_read(bus, devfn, where, size, val);
+}
+
+/*
+ * Some of the w1c_bits below also include read-only or non-writable
+ * reserved bits, this makes the code simpler and is OK as the bits
+ * are not affected by writing zeros to them.
+ */
+static u32 thunder_pem_bridge_w1c_bits(int where)
+{
+	u32 w1c_bits = 0;
+
+	switch (where & ~3) {
+	case 0x04: /* Command/Status */
+	case 0x1c: /* Base and I/O Limit/Secondary Status */
+		w1c_bits = 0xff000000;
+		break;
+	case 0x44: /* Power Management Control and Status */
+		w1c_bits = 0xfffffe00;
+		break;
+	case 0x78: /* Device Control/Device Status */
+	case 0x80: /* Link Control/Link Status */
+	case 0x88: /* Slot Control/Slot Status */
+	case 0x90: /* Root Status */
+	case 0xa0: /* Link Control 2 Registers/Link Status 2 */
+		w1c_bits = 0xffff0000;
+		break;
+	case 0x104: /* Uncorrectable Error Status */
+	case 0x110: /* Correctable Error Status */
+	case 0x130: /* Error Status */
+	case 0x160: /* Link Control 4 */
+		w1c_bits = 0xffffffff;
+		break;
+	default:
+		break;
+	}
+	return w1c_bits;
+}
+
+static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 val)
+{
+	struct gen_pci *pci = bus->sysdata;
+	struct thunder_pem_pci *pem_pci;
+	u64 write_val, read_val;
+	u32 mask = 0;
+
+	pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci);
+
+	if (devfn != 0 || where >= 2048)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * 32-bit accesses only.  If the write is for a size smaller
+	 * than 32-bits, we must first read the 32-bit value and merge
+	 * in the desired bits and then write the whole 32-bits back
+	 * out.
+	 */
+	switch (size) {
+	case 1:
+		read_val = where & ~3ull;
+		writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+		read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+		read_val >>= 32;
+		mask = ~(0xff << (8 * (where & 3)));
+		read_val &= mask;
+		val = (val & 0xff) << (8 * (where & 3));
+		val |= (u32)read_val;
+		break;
+	case 2:
+		read_val = where & ~3ull;
+		writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD);
+		read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD);
+		read_val >>= 32;
+		mask = ~(0xffff << (8 * (where & 3)));
+		read_val &= mask;
+		val = (val & 0xffff) << (8 * (where & 3));
+		val |= (u32)read_val;
+		break;
+	default:
+		break;
+	}
+
+	/*
+	 * By expanding the write width to 32 bits, we may
+	 * inadvertently hit some W1C bits that were not intended to
+	 * be written.  Calculate the mask that must be applied to the
+	 * data to be written to avoid these cases.
+	 */
+	if (mask) {
+		u32 w1c_bits = thunder_pem_bridge_w1c_bits(where);
+
+		if (w1c_bits) {
+			mask &= w1c_bits;
+			val &= ~mask;
+		}
+	}
+
+	/*
+	 * Low order bits are the config address, the high order 32
+	 * bits are the data to be written.
+	 */
+	write_val = where & ~3ull;
+	write_val |= (((u64)val) << 32);
+	writeq(write_val, pem_pci->pem_reg_base + PEM_CFG_WR);
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
+				    int where, int size, u32 val)
+{
+	struct gen_pci *pci = bus->sysdata;
+
+	if (bus->number < pci->cfg.bus_range->start ||
+	    bus->number > pci->cfg.bus_range->end)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	/*
+	 * The first device on the bus is the PEM PCIe bridge.
+	 * Special case its config access.
+	 */
+	if (bus->number == pci->cfg.bus_range->start)
+		return thunder_pem_bridge_write(bus, devfn, where, size, val);
+
+
+	return pci_generic_config_write(bus, devfn, where, size, val);
+}
+
+static struct gen_pci_cfg_bus_ops thunder_pem_bus_ops = {
+	.bus_shift	= 24,
+	.ops		= {
+		.map_bus	= thunder_pem_map_bus,
+		.read		= thunder_pem_config_read,
+		.write		= thunder_pem_config_write,
+	}
+};
+
+static const struct of_device_id thunder_pem_of_match[] = {
+	{ .compatible = "cavium,pci-host-thunder-pem",
+	  .data = &thunder_pem_bus_ops },
+
+	{ },
+};
+MODULE_DEVICE_TABLE(of, thunder_pem_of_match);
+
+static int thunder_pem_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	resource_size_t bar4_start;
+	struct resource *res_pem;
+	struct thunder_pem_pci *pem_pci;
+
+	pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
+	if (!pem_pci)
+		return -ENOMEM;
+
+	of_id = of_match_node(thunder_pem_of_match, dev->of_node);
+	pem_pci->gen_pci.cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data;
+
+	/*
+	 * The second register range is the PEM bridge to the PCIe
+	 * bus.  It has a different config access method than those
+	 * devices behind the bridge.
+	 */
+	res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res_pem) {
+		dev_err(dev, "missing \"reg[1]\"property\n");
+		return -EINVAL;
+	}
+
+	pem_pci->pem_reg_base = devm_ioremap(dev, res_pem->start, 0x10000);
+	if (!pem_pci->pem_reg_base)
+		return -ENOMEM;
+
+	/*
+	 * The MSI-X BAR for the PEM and AER interrupts is located at
+	 * a fixed offset from the PEM register base.  Generate a
+	 * fragment of the synthesized Enhanced Allocation capability
+	 * structure here for the BAR.
+	 */
+	bar4_start = res_pem->start + 0xf00000;
+	pem_pci->ea_entry[0] = (u32)bar4_start | 2;
+	pem_pci->ea_entry[1] = (u32)(res_pem->end - bar4_start) & ~3u;
+	pem_pci->ea_entry[2] = (u32)(bar4_start >> 32);
+
+	return pci_host_common_probe(pdev, &pem_pci->gen_pci);
+}
+
+static struct platform_driver thunder_pem_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = thunder_pem_of_match,
+	},
+	.probe = thunder_pem_probe,
+};
+module_platform_driver(thunder_pem_driver);
+
+MODULE_DESCRIPTION("Thunder PEM PCIe host driver");
+MODULE_LICENSE("GPL v2");

drivers/pci/host/pcie-altera.c

@@ -40,6 +40,7 @@
 #define P2A_INT_ENABLE			0x3070
 #define P2A_INT_ENA_ALL			0xf
 #define RP_LTSSM			0x3c64
+#define RP_LTSSM_MASK			0x1f
 #define LTSSM_L0			0xf
 
 /* TLP configuration type 0 and 1 */
@@ -140,7 +141,7 @@ static void tlp_write_tx(struct altera_pcie *pcie,
 
 static bool altera_pcie_link_is_up(struct altera_pcie *pcie)
 {
-	return !!(cra_readl(pcie, RP_LTSSM) & LTSSM_L0);
+	return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) == LTSSM_L0);
 }
 
 static bool altera_pcie_valid_config(struct altera_pcie *pcie,

drivers/pci/host/pcie-xilinx.c

@@ -94,9 +94,6 @@
 /* Number of MSI IRQs */
 #define XILINX_NUM_MSI_IRQS		128
 
-/* Number of Memory Resources */
-#define XILINX_MAX_NUM_RESOURCES	3
-
 /**
  * struct xilinx_pcie_port - PCIe port information
  * @reg_base: IO Mapped Register Base
@@ -105,7 +102,6 @@
  * @root_busno: Root Bus number
  * @dev: Device pointer
  * @irq_domain: IRQ domain pointer
- * @bus_range: Bus range
  * @resources: Bus Resources
  */
 struct xilinx_pcie_port {
@@ -115,17 +111,11 @@ struct xilinx_pcie_port {
 	u8 root_busno;
 	struct device *dev;
 	struct irq_domain *irq_domain;
-	struct resource bus_range;
 	struct list_head resources;
 };
 
 static DECLARE_BITMAP(msi_irq_in_use, XILINX_NUM_MSI_IRQS);
 
-static inline struct xilinx_pcie_port *sys_to_pcie(struct pci_sys_data *sys)
-{
-	return sys->private_data;
-}
-
 static inline u32 pcie_read(struct xilinx_pcie_port *port, u32 reg)
 {
 	return readl(port->reg_base + reg);
@@ -167,7 +157,7 @@ static void xilinx_pcie_clear_err_interrupts(struct xilinx_pcie_port *port)
  */
 static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 
 	/* Check if link is up when trying to access downstream ports */
 	if (bus->number != port->root_busno)
@@ -200,7 +190,7 @@ static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 static void __iomem *xilinx_pcie_map_bus(struct pci_bus *bus,
 					 unsigned int devfn, int where)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(bus->sysdata);
+	struct xilinx_pcie_port *port = bus->sysdata;
 	int relbus;
 
 	if (!xilinx_pcie_valid_device(bus, devfn))
@@ -232,7 +222,7 @@ static void xilinx_pcie_destroy_msi(unsigned int irq)
 
 	if (!test_bit(irq, msi_irq_in_use)) {
 		msi = irq_get_msi_desc(irq);
-		port = sys_to_pcie(msi_desc_to_pci_sysdata(msi));
+		port = msi_desc_to_pci_sysdata(msi);
 		dev_err(port->dev, "Trying to free unused MSI#%d\n", irq);
 	} else {
 		clear_bit(irq, msi_irq_in_use);
@@ -281,7 +271,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
 				     struct pci_dev *pdev,
 				     struct msi_desc *desc)
 {
-	struct xilinx_pcie_port *port = sys_to_pcie(pdev->bus->sysdata);
+	struct xilinx_pcie_port *port = pdev->bus->sysdata;
 	unsigned int irq;
 	int hwirq;
 	struct msi_msg msg;
@@ -617,138 +607,6 @@ static void xilinx_pcie_init_port(struct xilinx_pcie_port *port)
 		   XILINX_PCIE_REG_RPSC);
 }
 
-/**
- * xilinx_pcie_setup - Setup memory resources
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: '1' on success and error value on failure
- */
-static int xilinx_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-
-	list_splice_init(&port->resources, &sys->resources);
-
-	return 1;
-}
-
-/**
- * xilinx_pcie_scan_bus - Scan PCIe bus for devices
- * @nr: Bus number
- * @sys: Per controller structure
- *
- * Return: Valid Bus pointer on success and NULL on failure
- */
-static struct pci_bus *xilinx_pcie_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct xilinx_pcie_port *port = sys_to_pcie(sys);
-	struct pci_bus *bus;
-
-	port->root_busno = sys->busnr;
-
-	if (IS_ENABLED(CONFIG_PCI_MSI))
-		bus = pci_scan_root_bus_msi(port->dev, sys->busnr,
-					    &xilinx_pcie_ops, sys,
-					    &sys->resources,
-					    &xilinx_pcie_msi_chip);
-	else
-		bus = pci_scan_root_bus(port->dev, sys->busnr,
-					&xilinx_pcie_ops, sys, &sys->resources);
-	return bus;
-}
-
-/**
- * xilinx_pcie_parse_and_add_res - Add resources by parsing ranges
- * @port: PCIe port information
- *
- * Return: '0' on success and error value on failure
- */
-static int xilinx_pcie_parse_and_add_res(struct xilinx_pcie_port *port)
-{
-	struct device *dev = port->dev;
-	struct device_node *node = dev->of_node;
-	struct resource *mem;
-	resource_size_t offset;
-	struct of_pci_range_parser parser;
-	struct of_pci_range range;
-	struct resource_entry *win;
-	int err = 0, mem_resno = 0;
-
-	/* Get the ranges */
-	if (of_pci_range_parser_init(&parser, node)) {
-		dev_err(dev, "missing \"ranges\" property\n");
-		return -EINVAL;
-	}
-
-	/* Parse the ranges and add the resources found to the list */
-	for_each_of_pci_range(&parser, &range) {
-
-		if (mem_resno >= XILINX_MAX_NUM_RESOURCES) {
-			dev_err(dev, "Maximum memory resources exceeded\n");
-			return -EINVAL;
-		}
-
-		mem = devm_kmalloc(dev, sizeof(*mem), GFP_KERNEL);
-		if (!mem) {
-			err = -ENOMEM;
-			goto free_resources;
-		}
-
-		of_pci_range_to_resource(&range, node, mem);
-
-		switch (mem->flags & IORESOURCE_TYPE_BITS) {
-		case IORESOURCE_MEM:
-			offset = range.cpu_addr - range.pci_addr;
-			mem_resno++;
-			break;
-		default:
-			err = -EINVAL;
-			break;
-		}
-
-		if (err < 0) {
-			dev_warn(dev, "Invalid resource found %pR\n", mem);
-			continue;
-		}
-
-		err = request_resource(&iomem_resource, mem);
-		if (err)
-			goto free_resources;
-
-		pci_add_resource_offset(&port->resources, mem, offset);
-	}
-
-	/* Get the bus range */
-	if (of_pci_parse_bus_range(node, &port->bus_range)) {
-		u32 val = pcie_read(port, XILINX_PCIE_REG_BIR);
-		u8 last;
-
-		last = (val & XILINX_PCIE_BIR_ECAM_SZ_MASK) >>
-			XILINX_PCIE_BIR_ECAM_SZ_SHIFT;
-
-		port->bus_range = (struct resource) {
-			.name	= node->name,
-			.start	= 0,
-			.end	= last,
-			.flags	= IORESOURCE_BUS,
-		};
-	}
-
-	/* Register bus resource */
-	pci_add_resource(&port->resources, &port->bus_range);
-
-	return 0;
-
-free_resources:
-	release_child_resources(&iomem_resource);
-	resource_list_for_each_entry(win, &port->resources)
-		devm_kfree(dev, win->res);
-	pci_free_resource_list(&port->resources);
-
-	return err;
-}
-
 /**
  * xilinx_pcie_parse_dt - Parse Device tree
  * @port: PCIe port information
@@ -800,9 +658,12 @@ static int xilinx_pcie_parse_dt(struct xilinx_pcie_port *port)
 static int xilinx_pcie_probe(struct platform_device *pdev)
 {
 	struct xilinx_pcie_port *port;
-	struct hw_pci hw;
 	struct device *dev = &pdev->dev;
+	struct pci_bus *bus;
+
 	int err;
+	resource_size_t iobase = 0;
+	LIST_HEAD(res);
 
 	if (!dev->of_node)
 		return -ENODEV;
@@ -827,34 +688,28 @@ static int xilinx_pcie_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	/*
-	 * Parse PCI ranges, configuration bus range and
-	 * request their resources
-	 */
-	INIT_LIST_HEAD(&port->resources);
-	err = xilinx_pcie_parse_and_add_res(port);
+	err = of_pci_get_host_bridge_resources(dev->of_node, 0, 0xff, &res,
+					       &iobase);
 	if (err) {
-		dev_err(dev, "Failed adding resources\n");
+		dev_err(dev, "Getting bridge resources failed\n");
 		return err;
 	}
-
-	platform_set_drvdata(pdev, port);
-
-	/* Register the device */
-	memset(&hw, 0, sizeof(hw));
-	hw = (struct hw_pci) {
-		.nr_controllers	= 1,
-		.private_data	= (void **)&port,
-		.setup		= xilinx_pcie_setup,
-		.map_irq	= of_irq_parse_and_map_pci,
-		.scan		= xilinx_pcie_scan_bus,
-		.ops		= &xilinx_pcie_ops,
-	};
+	bus = pci_create_root_bus(&pdev->dev, 0,
+				  &xilinx_pcie_ops, port, &res);
+	if (!bus)
+		return -ENOMEM;
 
 #ifdef CONFIG_PCI_MSI
 	xilinx_pcie_msi_chip.dev = port->dev;
+	bus->msi = &xilinx_pcie_msi_chip;
 #endif
-	pci_common_init_dev(dev, &hw);
+	pci_scan_child_bus(bus);
+	pci_assign_unassigned_bus_resources(bus);
+#ifndef CONFIG_MICROBLAZE
+	pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
+#endif
+	pci_bus_add_devices(bus);
+	platform_set_drvdata(pdev, port);
 
 	return 0;
 }

drivers/pci/probe.c

@@ -757,6 +757,12 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
 
 	pcibios_add_bus(child);
 
+	if (child->ops->add_bus) {
+		ret = child->ops->add_bus(child);
+		if (WARN_ON(ret < 0))
+			dev_err(&child->dev, "failed to add bus: %d\n", ret);
+	}
+
 	/* Create legacy_io and legacy_mem files for this bus */
 	pci_create_legacy_files(child);
 

drivers/pci/remove.c

@@ -54,6 +54,10 @@ void pci_remove_bus(struct pci_bus *bus)
 	pci_bus_release_busn_res(bus);
 	up_write(&pci_bus_sem);
 	pci_remove_legacy_files(bus);
+
+	if (bus->ops->remove_bus)
+		bus->ops->remove_bus(bus);
+
 	pcibios_remove_bus(bus);
 	device_unregister(&bus->dev);
 }

include/linux/pci.h

@@ -572,6 +572,8 @@ static inline int pcibios_err_to_errno(int err)
 /* Low-level architecture-dependent routines */
 
 struct pci_ops {
+	int (*add_bus)(struct pci_bus *bus);
+	void (*remove_bus)(struct pci_bus *bus);
 	void __iomem *(*map_bus)(struct pci_bus *bus, unsigned int devfn, int where);
 	int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
 	int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);