提交 c2afad6c 编写于 作者: K Kamil Konieczny 提交者: Herbert Xu

crypto: s5p-sss - Add HASH support for Exynos

Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW.
It uses the crypto framework asynchronous hash api.
It is based on omap-sham.c driver.
S5P has some HW differencies and is not implemented.

Modifications in s5p-sss:

- Add hash supporting structures and functions.

- Modify irq handler to handle both aes and hash signals.

- Resize resource end in probe if EXYNOS_HASH is enabled in
  Kconfig.

- Add new copyright line and new author.

- Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6
  with crypto run-time self test testmgr
  and with tcrypt module with: modprobe tcrypt sec=1 mode=N
  where N=402, 403, 404 (MD5, SHA1, SHA256).

Modifications in drivers/crypto/Kconfig:

- Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG
  and CRYPTO_DEV_S5P

- Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
  as they are needed for fallback.
Acked-by: NVladimir Zapolskiy <vz@mleia.com>
Reviewed-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NKamil Konieczny <k.konieczny@partner.samsung.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
上级 e5e40908
......@@ -427,6 +427,20 @@ config CRYPTO_DEV_S5P
Select this to offload Samsung S5PV210 or S5PC110, Exynos from AES
algorithms execution.
config CRYPTO_DEV_EXYNOS_HASH
bool "Support for Samsung Exynos HASH accelerator"
depends on CRYPTO_DEV_S5P
depends on !CRYPTO_DEV_EXYNOS_RNG && CRYPTO_DEV_EXYNOS_RNG!=m
select CRYPTO_SHA1
select CRYPTO_MD5
select CRYPTO_SHA256
help
Select this to offload Exynos from HASH MD5/SHA1/SHA256.
This will select software SHA1, MD5 and SHA256 as they are
needed for small and zero-size messages.
HASH algorithms will be disabled if EXYNOS_RNG
is enabled due to hw conflict.
config CRYPTO_DEV_NX
bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration"
depends on PPC64
......
/*
* Cryptographic API.
*
* Support for Samsung S5PV210 HW acceleration.
* Support for Samsung S5PV210 and Exynos HW acceleration.
*
* Copyright (C) 2011 NetUP Inc. All rights reserved.
* Copyright (c) 2017 Samsung Electronics Co., Ltd. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* Hash part based on omap-sham.c driver.
*/
#include <linux/clk.h>
......@@ -30,28 +32,41 @@
#include <crypto/algapi.h>
#include <crypto/scatterwalk.h>
#include <crypto/hash.h>
#include <crypto/md5.h>
#include <crypto/sha.h>
#include <crypto/internal/hash.h>
#define _SBF(s, v) ((v) << (s))
/* Feed control registers */
#define SSS_REG_FCINTSTAT 0x0000
#define SSS_FCINTSTAT_HPARTINT BIT(7)
#define SSS_FCINTSTAT_HDONEINT BIT(5)
#define SSS_FCINTSTAT_BRDMAINT BIT(3)
#define SSS_FCINTSTAT_BTDMAINT BIT(2)
#define SSS_FCINTSTAT_HRDMAINT BIT(1)
#define SSS_FCINTSTAT_PKDMAINT BIT(0)
#define SSS_REG_FCINTENSET 0x0004
#define SSS_FCINTENSET_HPARTINTENSET BIT(7)
#define SSS_FCINTENSET_HDONEINTENSET BIT(5)
#define SSS_FCINTENSET_BRDMAINTENSET BIT(3)
#define SSS_FCINTENSET_BTDMAINTENSET BIT(2)
#define SSS_FCINTENSET_HRDMAINTENSET BIT(1)
#define SSS_FCINTENSET_PKDMAINTENSET BIT(0)
#define SSS_REG_FCINTENCLR 0x0008
#define SSS_FCINTENCLR_HPARTINTENCLR BIT(7)
#define SSS_FCINTENCLR_HDONEINTENCLR BIT(5)
#define SSS_FCINTENCLR_BRDMAINTENCLR BIT(3)
#define SSS_FCINTENCLR_BTDMAINTENCLR BIT(2)
#define SSS_FCINTENCLR_HRDMAINTENCLR BIT(1)
#define SSS_FCINTENCLR_PKDMAINTENCLR BIT(0)
#define SSS_REG_FCINTPEND 0x000C
#define SSS_FCINTPEND_HPARTINTP BIT(7)
#define SSS_FCINTPEND_HDONEINTP BIT(5)
#define SSS_FCINTPEND_BRDMAINTP BIT(3)
#define SSS_FCINTPEND_BTDMAINTP BIT(2)
#define SSS_FCINTPEND_HRDMAINTP BIT(1)
......@@ -72,6 +87,7 @@
#define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00)
#define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01)
#define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02)
#define SSS_HASHIN_MASK _SBF(0, 0x03)
#define SSS_REG_FCBRDMAS 0x0020
#define SSS_REG_FCBRDMAL 0x0024
......@@ -146,9 +162,80 @@
#define AES_KEY_LEN 16
#define CRYPTO_QUEUE_LEN 1
/* HASH registers */
#define SSS_REG_HASH_CTRL 0x00
#define SSS_HASH_USER_IV_EN BIT(5)
#define SSS_HASH_INIT_BIT BIT(4)
#define SSS_HASH_ENGINE_SHA1 _SBF(1, 0x00)
#define SSS_HASH_ENGINE_MD5 _SBF(1, 0x01)
#define SSS_HASH_ENGINE_SHA256 _SBF(1, 0x02)
#define SSS_HASH_ENGINE_MASK _SBF(1, 0x03)
#define SSS_REG_HASH_CTRL_PAUSE 0x04
#define SSS_HASH_PAUSE BIT(0)
#define SSS_REG_HASH_CTRL_FIFO 0x08
#define SSS_HASH_FIFO_MODE_DMA BIT(0)
#define SSS_HASH_FIFO_MODE_CPU 0
#define SSS_REG_HASH_CTRL_SWAP 0x0C
#define SSS_HASH_BYTESWAP_DI BIT(3)
#define SSS_HASH_BYTESWAP_DO BIT(2)
#define SSS_HASH_BYTESWAP_IV BIT(1)
#define SSS_HASH_BYTESWAP_KEY BIT(0)
#define SSS_REG_HASH_STATUS 0x10
#define SSS_HASH_STATUS_MSG_DONE BIT(6)
#define SSS_HASH_STATUS_PARTIAL_DONE BIT(4)
#define SSS_HASH_STATUS_BUFFER_READY BIT(0)
#define SSS_REG_HASH_MSG_SIZE_LOW 0x20
#define SSS_REG_HASH_MSG_SIZE_HIGH 0x24
#define SSS_REG_HASH_PRE_MSG_SIZE_LOW 0x28
#define SSS_REG_HASH_PRE_MSG_SIZE_HIGH 0x2C
#define SSS_REG_HASH_IV(s) (0xB0 + ((s) << 2))
#define SSS_REG_HASH_OUT(s) (0x100 + ((s) << 2))
#define HASH_BLOCK_SIZE 64
#define HASH_REG_SIZEOF 4
#define HASH_MD5_MAX_REG (MD5_DIGEST_SIZE / HASH_REG_SIZEOF)
#define HASH_SHA1_MAX_REG (SHA1_DIGEST_SIZE / HASH_REG_SIZEOF)
#define HASH_SHA256_MAX_REG (SHA256_DIGEST_SIZE / HASH_REG_SIZEOF)
/*
* HASH bit numbers, used by device, setting in dev->hash_flags with
* functions set_bit(), clear_bit() or tested with test_bit() or BIT(),
* to keep HASH state BUSY or FREE, or to signal state from irq_handler
* to hash_tasklet. SGS keep track of allocated memory for scatterlist
*/
#define HASH_FLAGS_BUSY 0
#define HASH_FLAGS_FINAL 1
#define HASH_FLAGS_DMA_ACTIVE 2
#define HASH_FLAGS_OUTPUT_READY 3
#define HASH_FLAGS_DMA_READY 4
#define HASH_FLAGS_SGS_COPIED 5
#define HASH_FLAGS_SGS_ALLOCED 6
/* HASH HW constants */
#define BUFLEN HASH_BLOCK_SIZE
#define SSS_HASH_DMA_LEN_ALIGN 8
#define SSS_HASH_DMA_ALIGN_MASK (SSS_HASH_DMA_LEN_ALIGN - 1)
#define SSS_HASH_QUEUE_LENGTH 10
/**
* struct samsung_aes_variant - platform specific SSS driver data
* @aes_offset: AES register offset from SSS module's base.
* @hash_offset: HASH register offset from SSS module's base.
*
* Specifies platform specific configuration of SSS module.
* Note: A structure for driver specific platform data is used for future
......@@ -156,6 +243,7 @@
*/
struct samsung_aes_variant {
unsigned int aes_offset;
unsigned int hash_offset;
};
struct s5p_aes_reqctx {
......@@ -195,6 +283,19 @@ struct s5p_aes_ctx {
* protects against concurrent access to these fields.
* @lock: Lock for protecting both access to device hardware registers
* and fields related to current request (including the busy field).
* @res: Resources for hash.
* @io_hash_base: Per-variant offset for HASH block IO memory.
* @hash_lock: Lock for protecting hash_req, hash_queue and hash_flags
* variable.
* @hash_flags: Flags for current HASH op.
* @hash_queue: Async hash queue.
* @hash_tasklet: New HASH request scheduling job.
* @xmit_buf: Buffer for current HASH request transfer into SSS block.
* @hash_req: Current request sending to SSS HASH block.
* @hash_sg_iter: Scatterlist transferred through DMA into SSS HASH block.
* @hash_sg_cnt: Counter for hash_sg_iter.
*
* @use_hash: true if HASH algs enabled
*/
struct s5p_aes_dev {
struct device *dev;
......@@ -215,16 +316,83 @@ struct s5p_aes_dev {
struct crypto_queue queue;
bool busy;
spinlock_t lock;
struct resource *res;
void __iomem *io_hash_base;
spinlock_t hash_lock; /* protect hash_ vars */
unsigned long hash_flags;
struct crypto_queue hash_queue;
struct tasklet_struct hash_tasklet;
u8 xmit_buf[BUFLEN];
struct ahash_request *hash_req;
struct scatterlist *hash_sg_iter;
unsigned int hash_sg_cnt;
bool use_hash;
};
static struct s5p_aes_dev *s5p_dev;
/**
* struct s5p_hash_reqctx - HASH request context
* @dd: Associated device
* @op_update: Current request operation (OP_UPDATE or OP_FINAL)
* @digcnt: Number of bytes processed by HW (without buffer[] ones)
* @digest: Digest message or IV for partial result
* @nregs: Number of HW registers for digest or IV read/write
* @engine: Bits for selecting type of HASH in SSS block
* @sg: sg for DMA transfer
* @sg_len: Length of sg for DMA transfer
* @sgl[]: sg for joining buffer and req->src scatterlist
* @skip: Skip offset in req->src for current op
* @total: Total number of bytes for current request
* @finup: Keep state for finup or final.
* @error: Keep track of error.
* @bufcnt: Number of bytes holded in buffer[]
* @buffer[]: For byte(s) from end of req->src in UPDATE op
*/
struct s5p_hash_reqctx {
struct s5p_aes_dev *dd;
bool op_update;
u64 digcnt;
u8 digest[SHA256_DIGEST_SIZE];
unsigned int nregs; /* digest_size / sizeof(reg) */
u32 engine;
struct scatterlist *sg;
unsigned int sg_len;
struct scatterlist sgl[2];
unsigned int skip;
unsigned int total;
bool finup;
bool error;
u32 bufcnt;
u8 buffer[0];
};
/**
* struct s5p_hash_ctx - HASH transformation context
* @dd: Associated device
* @flags: Bits for algorithm HASH.
* @fallback: Software transformation for zero message or size < BUFLEN.
*/
struct s5p_hash_ctx {
struct s5p_aes_dev *dd;
unsigned long flags;
struct crypto_shash *fallback;
};
static const struct samsung_aes_variant s5p_aes_data = {
.aes_offset = 0x4000,
.hash_offset = 0x6000,
};
static const struct samsung_aes_variant exynos_aes_data = {
.aes_offset = 0x200,
.hash_offset = 0x400,
};
static const struct of_device_id s5p_sss_dt_match[] = {
......@@ -254,6 +422,8 @@ static inline struct samsung_aes_variant *find_s5p_sss_version
platform_get_device_id(pdev)->driver_data;
}
static struct s5p_aes_dev *s5p_dev;
static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg));
......@@ -436,15 +606,65 @@ static int s5p_aes_rx(struct s5p_aes_dev *dev/*, bool *set_dma*/)
return ret;
}
static inline u32 s5p_hash_read(struct s5p_aes_dev *dd, u32 offset)
{
return __raw_readl(dd->io_hash_base + offset);
}
static inline void s5p_hash_write(struct s5p_aes_dev *dd,
u32 offset, u32 value)
{
__raw_writel(value, dd->io_hash_base + offset);
}
/**
* s5p_set_dma_hashdata() - start DMA with sg
* @dev: device
* @sg: scatterlist ready to DMA transmit
*/
static void s5p_set_dma_hashdata(struct s5p_aes_dev *dev,
struct scatterlist *sg)
{
dev->hash_sg_cnt--;
SSS_WRITE(dev, FCHRDMAS, sg_dma_address(sg));
SSS_WRITE(dev, FCHRDMAL, sg_dma_len(sg)); /* DMA starts */
}
/**
* s5p_hash_rx() - get next hash_sg_iter
* @dev: device
*
* Return:
* 2 if there is no more data and it is UPDATE op
* 1 if new receiving (input) data is ready and can be written to device
* 0 if there is no more data and it is FINAL op
*/
static int s5p_hash_rx(struct s5p_aes_dev *dev)
{
if (dev->hash_sg_cnt > 0) {
dev->hash_sg_iter = sg_next(dev->hash_sg_iter);
return 1;
}
set_bit(HASH_FLAGS_DMA_READY, &dev->hash_flags);
if (test_bit(HASH_FLAGS_FINAL, &dev->hash_flags))
return 0;
return 2;
}
static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
int err_dma_tx = 0;
int err_dma_rx = 0;
int err_dma_hx = 0;
bool tx_end = false;
bool hx_end = false;
unsigned long flags;
uint32_t status;
u32 st_bits;
int err;
spin_lock_irqsave(&dev->lock, flags);
......@@ -456,6 +676,8 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
*
* If there is no more data in tx scatter list, call s5p_aes_complete()
* and schedule new tasklet.
*
* Handle hx interrupt. If there is still data map next entry.
*/
status = SSS_READ(dev, FCINTSTAT);
if (status & SSS_FCINTSTAT_BRDMAINT)
......@@ -467,7 +689,29 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
err_dma_tx = s5p_aes_tx(dev);
}
SSS_WRITE(dev, FCINTPEND, status);
if (status & SSS_FCINTSTAT_HRDMAINT)
err_dma_hx = s5p_hash_rx(dev);
st_bits = status & (SSS_FCINTSTAT_BRDMAINT | SSS_FCINTSTAT_BTDMAINT |
SSS_FCINTSTAT_HRDMAINT);
/* clear DMA bits */
SSS_WRITE(dev, FCINTPEND, st_bits);
/* clear HASH irq bits */
if (status & (SSS_FCINTSTAT_HDONEINT | SSS_FCINTSTAT_HPARTINT)) {
/* cannot have both HPART and HDONE */
if (status & SSS_FCINTSTAT_HPARTINT)
st_bits = SSS_HASH_STATUS_PARTIAL_DONE;
if (status & SSS_FCINTSTAT_HDONEINT)
st_bits = SSS_HASH_STATUS_MSG_DONE;
set_bit(HASH_FLAGS_OUTPUT_READY, &dev->hash_flags);
s5p_hash_write(dev, SSS_REG_HASH_STATUS, st_bits);
hx_end = true;
/* when DONE or PART, do not handle HASH DMA */
err_dma_hx = 0;
}
if (err_dma_rx < 0) {
err = err_dma_rx;
......@@ -480,6 +724,8 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
if (tx_end) {
s5p_sg_done(dev);
if (err_dma_hx == 1)
s5p_set_dma_hashdata(dev, dev->hash_sg_iter);
spin_unlock_irqrestore(&dev->lock, flags);
......@@ -497,21 +743,1100 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
s5p_set_dma_outdata(dev, dev->sg_dst);
if (err_dma_rx == 1)
s5p_set_dma_indata(dev, dev->sg_src);
if (err_dma_hx == 1)
s5p_set_dma_hashdata(dev, dev->hash_sg_iter);
spin_unlock_irqrestore(&dev->lock, flags);
}
return IRQ_HANDLED;
goto hash_irq_end;
error:
s5p_sg_done(dev);
dev->busy = false;
if (err_dma_hx == 1)
s5p_set_dma_hashdata(dev, dev->hash_sg_iter);
spin_unlock_irqrestore(&dev->lock, flags);
s5p_aes_complete(dev, err);
hash_irq_end:
/*
* Note about else if:
* when hash_sg_iter reaches end and its UPDATE op,
* issue SSS_HASH_PAUSE and wait for HPART irq
*/
if (hx_end)
tasklet_schedule(&dev->hash_tasklet);
else if (err_dma_hx == 2)
s5p_hash_write(dev, SSS_REG_HASH_CTRL_PAUSE,
SSS_HASH_PAUSE);
return IRQ_HANDLED;
}
/**
* s5p_hash_read_msg() - read message or IV from HW
* @req: AHASH request
*/
static void s5p_hash_read_msg(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
struct s5p_aes_dev *dd = ctx->dd;
u32 *hash = (u32 *)ctx->digest;
unsigned int i;
for (i = 0; i < ctx->nregs; i++)
hash[i] = s5p_hash_read(dd, SSS_REG_HASH_OUT(i));
}
/**
* s5p_hash_write_ctx_iv() - write IV for next partial/finup op.
* @dd: device
* @ctx: request context
*/
static void s5p_hash_write_ctx_iv(struct s5p_aes_dev *dd,
struct s5p_hash_reqctx *ctx)
{
u32 *hash = (u32 *)ctx->digest;
unsigned int i;
for (i = 0; i < ctx->nregs; i++)
s5p_hash_write(dd, SSS_REG_HASH_IV(i), hash[i]);
}
/**
* s5p_hash_write_iv() - write IV for next partial/finup op.
* @req: AHASH request
*/
static void s5p_hash_write_iv(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
s5p_hash_write_ctx_iv(ctx->dd, ctx);
}
/**
* s5p_hash_copy_result() - copy digest into req->result
* @req: AHASH request
*/
static void s5p_hash_copy_result(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
if (!req->result)
return;
memcpy(req->result, ctx->digest, ctx->nregs * HASH_REG_SIZEOF);
}
/**
* s5p_hash_dma_flush() - flush HASH DMA
* @dev: secss device
*/
static void s5p_hash_dma_flush(struct s5p_aes_dev *dev)
{
SSS_WRITE(dev, FCHRDMAC, SSS_FCHRDMAC_FLUSH);
}
/**
* s5p_hash_dma_enable() - enable DMA mode for HASH
* @dev: secss device
*
* enable DMA mode for HASH
*/
static void s5p_hash_dma_enable(struct s5p_aes_dev *dev)
{
s5p_hash_write(dev, SSS_REG_HASH_CTRL_FIFO, SSS_HASH_FIFO_MODE_DMA);
}
/**
* s5p_hash_irq_disable() - disable irq HASH signals
* @dev: secss device
* @flags: bitfield with irq's to be disabled
*/
static void s5p_hash_irq_disable(struct s5p_aes_dev *dev, u32 flags)
{
SSS_WRITE(dev, FCINTENCLR, flags);
}
/**
* s5p_hash_irq_enable() - enable irq signals
* @dev: secss device
* @flags: bitfield with irq's to be enabled
*/
static void s5p_hash_irq_enable(struct s5p_aes_dev *dev, int flags)
{
SSS_WRITE(dev, FCINTENSET, flags);
}
/**
* s5p_hash_set_flow() - set flow inside SecSS AES/DES with/without HASH
* @dev: secss device
* @hashflow: HASH stream flow with/without crypto AES/DES
*/
static void s5p_hash_set_flow(struct s5p_aes_dev *dev, u32 hashflow)
{
unsigned long flags;
u32 flow;
spin_lock_irqsave(&dev->lock, flags);
flow = SSS_READ(dev, FCFIFOCTRL);
flow &= ~SSS_HASHIN_MASK;
flow |= hashflow;
SSS_WRITE(dev, FCFIFOCTRL, flow);
spin_unlock_irqrestore(&dev->lock, flags);
}
/**
* s5p_ahash_dma_init() - enable DMA and set HASH flow inside SecSS
* @dev: secss device
* @hashflow: HASH stream flow with/without AES/DES
*
* flush HASH DMA and enable DMA, set HASH stream flow inside SecSS HW,
* enable HASH irq's HRDMA, HDONE, HPART
*/
static void s5p_ahash_dma_init(struct s5p_aes_dev *dev, u32 hashflow)
{
s5p_hash_irq_disable(dev, SSS_FCINTENCLR_HRDMAINTENCLR |
SSS_FCINTENCLR_HDONEINTENCLR |
SSS_FCINTENCLR_HPARTINTENCLR);
s5p_hash_dma_flush(dev);
s5p_hash_dma_enable(dev);
s5p_hash_set_flow(dev, hashflow & SSS_HASHIN_MASK);
s5p_hash_irq_enable(dev, SSS_FCINTENSET_HRDMAINTENSET |
SSS_FCINTENSET_HDONEINTENSET |
SSS_FCINTENSET_HPARTINTENSET);
}
/**
* s5p_hash_write_ctrl() - prepare HASH block in SecSS for processing
* @dd: secss device
* @length: length for request
* @final: true if final op
*
* Prepare SSS HASH block for processing bytes in DMA mode. If it is called
* after previous updates, fill up IV words. For final, calculate and set
* lengths for HASH so SecSS can finalize hash. For partial, set SSS HASH
* length as 2^63 so it will be never reached and set to zero prelow and
* prehigh.
*
* This function does not start DMA transfer.
*/
static void s5p_hash_write_ctrl(struct s5p_aes_dev *dd, size_t length,
bool final)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req);
u32 prelow, prehigh, low, high;
u32 configflags, swapflags;
u64 tmplen;
configflags = ctx->engine | SSS_HASH_INIT_BIT;
if (likely(ctx->digcnt)) {
s5p_hash_write_ctx_iv(dd, ctx);
configflags |= SSS_HASH_USER_IV_EN;
}
if (final) {
/* number of bytes for last part */
low = length;
high = 0;
/* total number of bits prev hashed */
tmplen = ctx->digcnt * 8;
prelow = (u32)tmplen;
prehigh = (u32)(tmplen >> 32);
} else {
prelow = 0;
prehigh = 0;
low = 0;
high = BIT(31);
}
swapflags = SSS_HASH_BYTESWAP_DI | SSS_HASH_BYTESWAP_DO |
SSS_HASH_BYTESWAP_IV | SSS_HASH_BYTESWAP_KEY;
s5p_hash_write(dd, SSS_REG_HASH_MSG_SIZE_LOW, low);
s5p_hash_write(dd, SSS_REG_HASH_MSG_SIZE_HIGH, high);
s5p_hash_write(dd, SSS_REG_HASH_PRE_MSG_SIZE_LOW, prelow);
s5p_hash_write(dd, SSS_REG_HASH_PRE_MSG_SIZE_HIGH, prehigh);
s5p_hash_write(dd, SSS_REG_HASH_CTRL_SWAP, swapflags);
s5p_hash_write(dd, SSS_REG_HASH_CTRL, configflags);
}
/**
* s5p_hash_xmit_dma() - start DMA hash processing
* @dd: secss device
* @length: length for request
* @final: true if final op
*
* Update digcnt here, as it is needed for finup/final op.
*/
static int s5p_hash_xmit_dma(struct s5p_aes_dev *dd, size_t length,
bool final)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req);
unsigned int cnt;
cnt = dma_map_sg(dd->dev, ctx->sg, ctx->sg_len, DMA_TO_DEVICE);
if (!cnt) {
dev_err(dd->dev, "dma_map_sg error\n");
ctx->error = true;
return -EINVAL;
}
set_bit(HASH_FLAGS_DMA_ACTIVE, &dd->hash_flags);
dd->hash_sg_iter = ctx->sg;
dd->hash_sg_cnt = cnt;
s5p_hash_write_ctrl(dd, length, final);
ctx->digcnt += length;
ctx->total -= length;
/* catch last interrupt */
if (final)
set_bit(HASH_FLAGS_FINAL, &dd->hash_flags);
s5p_set_dma_hashdata(dd, dd->hash_sg_iter); /* DMA starts */
return -EINPROGRESS;
}
/**
* s5p_hash_copy_sgs() - copy request's bytes into new buffer
* @ctx: request context
* @sg: source scatterlist request
* @new_len: number of bytes to process from sg
*
* Allocate new buffer, copy data for HASH into it. If there was xmit_buf
* filled, copy it first, then copy data from sg into it. Prepare one sgl[0]
* with allocated buffer.
*
* Set bit in dd->hash_flag so we can free it after irq ends processing.
*/
static int s5p_hash_copy_sgs(struct s5p_hash_reqctx *ctx,
struct scatterlist *sg, unsigned int new_len)
{
unsigned int pages, len;
void *buf;
len = new_len + ctx->bufcnt;
pages = get_order(len);
buf = (void *)__get_free_pages(GFP_ATOMIC, pages);
if (!buf) {
dev_err(ctx->dd->dev, "alloc pages for unaligned case.\n");
ctx->error = true;
return -ENOMEM;
}
if (ctx->bufcnt)
memcpy(buf, ctx->dd->xmit_buf, ctx->bufcnt);
scatterwalk_map_and_copy(buf + ctx->bufcnt, sg, ctx->skip,
new_len, 0);
sg_init_table(ctx->sgl, 1);
sg_set_buf(ctx->sgl, buf, len);
ctx->sg = ctx->sgl;
ctx->sg_len = 1;
ctx->bufcnt = 0;
ctx->skip = 0;
set_bit(HASH_FLAGS_SGS_COPIED, &ctx->dd->hash_flags);
return 0;
}
/**
* s5p_hash_copy_sg_lists() - copy sg list and make fixes in copy
* @ctx: request context
* @sg: source scatterlist request
* @new_len: number of bytes to process from sg
*
* Allocate new scatterlist table, copy data for HASH into it. If there was
* xmit_buf filled, prepare it first, then copy page, length and offset from
* source sg into it, adjusting begin and/or end for skip offset and
* hash_later value.
*
* Resulting sg table will be assigned to ctx->sg. Set flag so we can free
* it after irq ends processing.
*/
static int s5p_hash_copy_sg_lists(struct s5p_hash_reqctx *ctx,
struct scatterlist *sg, unsigned int new_len)
{
unsigned int skip = ctx->skip, n = sg_nents(sg);
struct scatterlist *tmp;
unsigned int len;
if (ctx->bufcnt)
n++;
ctx->sg = kmalloc_array(n, sizeof(*sg), GFP_KERNEL);
if (!ctx->sg) {
ctx->error = true;
return -ENOMEM;
}
sg_init_table(ctx->sg, n);
tmp = ctx->sg;
ctx->sg_len = 0;
if (ctx->bufcnt) {
sg_set_buf(tmp, ctx->dd->xmit_buf, ctx->bufcnt);
tmp = sg_next(tmp);
ctx->sg_len++;
}
while (sg && skip >= sg->length) {
skip -= sg->length;
sg = sg_next(sg);
}
while (sg && new_len) {
len = sg->length - skip;
if (new_len < len)
len = new_len;
new_len -= len;
sg_set_page(tmp, sg_page(sg), len, sg->offset + skip);
skip = 0;
if (new_len <= 0)
sg_mark_end(tmp);
tmp = sg_next(tmp);
ctx->sg_len++;
sg = sg_next(sg);
}
set_bit(HASH_FLAGS_SGS_ALLOCED, &ctx->dd->hash_flags);
return 0;
}
/**
* s5p_hash_prepare_sgs() - prepare sg for processing
* @ctx: request context
* @sg: source scatterlist request
* @nbytes: number of bytes to process from sg
* @final: final flag
*
* Check two conditions: (1) if buffers in sg have len aligned data, and (2)
* sg table have good aligned elements (list_ok). If one of this checks fails,
* then either (1) allocates new buffer for data with s5p_hash_copy_sgs, copy
* data into this buffer and prepare request in sgl, or (2) allocates new sg
* table and prepare sg elements.
*
* For digest or finup all conditions can be good, and we may not need any
* fixes.
*/
static int s5p_hash_prepare_sgs(struct s5p_hash_reqctx *ctx,
struct scatterlist *sg,
unsigned int new_len, bool final)
{
unsigned int skip = ctx->skip, nbytes = new_len, n = 0;
bool aligned = true, list_ok = true;
struct scatterlist *sg_tmp = sg;
if (!sg || !sg->length || !new_len)
return 0;
if (skip || !final)
list_ok = false;
while (nbytes > 0 && sg_tmp) {
n++;
if (skip >= sg_tmp->length) {
skip -= sg_tmp->length;
if (!sg_tmp->length) {
aligned = false;
break;
}
} else {
if (!IS_ALIGNED(sg_tmp->length - skip, BUFLEN)) {
aligned = false;
break;
}
if (nbytes < sg_tmp->length - skip) {
list_ok = false;
break;
}
nbytes -= sg_tmp->length - skip;
skip = 0;
}
sg_tmp = sg_next(sg_tmp);
}
if (!aligned)
return s5p_hash_copy_sgs(ctx, sg, new_len);
else if (!list_ok)
return s5p_hash_copy_sg_lists(ctx, sg, new_len);
/*
* Have aligned data from previous operation and/or current
* Note: will enter here only if (digest or finup) and aligned
*/
if (ctx->bufcnt) {
ctx->sg_len = n;
sg_init_table(ctx->sgl, 2);
sg_set_buf(ctx->sgl, ctx->dd->xmit_buf, ctx->bufcnt);
sg_chain(ctx->sgl, 2, sg);
ctx->sg = ctx->sgl;
ctx->sg_len++;
} else {
ctx->sg = sg;
ctx->sg_len = n;
}
return 0;
}
/**
* s5p_hash_prepare_request() - prepare request for processing
* @req: AHASH request
* @update: true if UPDATE op
*
* Note 1: we can have update flag _and_ final flag at the same time.
* Note 2: we enter here when digcnt > BUFLEN (=HASH_BLOCK_SIZE) or
* either req->nbytes or ctx->bufcnt + req->nbytes is > BUFLEN or
* we have final op
*/
static int s5p_hash_prepare_request(struct ahash_request *req, bool update)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
bool final = ctx->finup;
int xmit_len, hash_later, nbytes;
int ret;
if (!req)
return 0;
if (update)
nbytes = req->nbytes;
else
nbytes = 0;
ctx->total = nbytes + ctx->bufcnt;
if (!ctx->total)
return 0;
if (nbytes && (!IS_ALIGNED(ctx->bufcnt, BUFLEN))) {
/* bytes left from previous request, so fill up to BUFLEN */
int len = BUFLEN - ctx->bufcnt % BUFLEN;
if (len > nbytes)
len = nbytes;
scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, req->src,
0, len, 0);
ctx->bufcnt += len;
nbytes -= len;
ctx->skip = len;
} else {
ctx->skip = 0;
}
if (ctx->bufcnt)
memcpy(ctx->dd->xmit_buf, ctx->buffer, ctx->bufcnt);
xmit_len = ctx->total;
if (final) {
hash_later = 0;
} else {
if (IS_ALIGNED(xmit_len, BUFLEN))
xmit_len -= BUFLEN;
else
xmit_len -= xmit_len & (BUFLEN - 1);
hash_later = ctx->total - xmit_len;
/* copy hash_later bytes from end of req->src */
/* previous bytes are in xmit_buf, so no overwrite */
scatterwalk_map_and_copy(ctx->buffer, req->src,
req->nbytes - hash_later,
hash_later, 0);
}
if (xmit_len > BUFLEN) {
ret = s5p_hash_prepare_sgs(ctx, req->src, nbytes - hash_later,
final);
if (ret)
return ret;
} else {
/* have buffered data only */
if (unlikely(!ctx->bufcnt)) {
/* first update didn't fill up buffer */
scatterwalk_map_and_copy(ctx->dd->xmit_buf, req->src,
0, xmit_len, 0);
}
sg_init_table(ctx->sgl, 1);
sg_set_buf(ctx->sgl, ctx->dd->xmit_buf, xmit_len);
ctx->sg = ctx->sgl;
ctx->sg_len = 1;
}
ctx->bufcnt = hash_later;
if (!final)
ctx->total = xmit_len;
return 0;
}
/**
* s5p_hash_update_dma_stop() - unmap DMA
* @dd: secss device
*
* Unmap scatterlist ctx->sg.
*/
static void s5p_hash_update_dma_stop(struct s5p_aes_dev *dd)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req);
dma_unmap_sg(dd->dev, ctx->sg, ctx->sg_len, DMA_TO_DEVICE);
clear_bit(HASH_FLAGS_DMA_ACTIVE, &dd->hash_flags);
}
/**
* s5p_hash_finish() - copy calculated digest to crypto layer
* @req: AHASH request
*/
static void s5p_hash_finish(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
struct s5p_aes_dev *dd = ctx->dd;
if (ctx->digcnt)
s5p_hash_copy_result(req);
dev_dbg(dd->dev, "hash_finish digcnt: %lld\n", ctx->digcnt);
}
/**
* s5p_hash_finish_req() - finish request
* @req: AHASH request
* @err: error
*/
static void s5p_hash_finish_req(struct ahash_request *req, int err)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
struct s5p_aes_dev *dd = ctx->dd;
unsigned long flags;
if (test_bit(HASH_FLAGS_SGS_COPIED, &dd->hash_flags))
free_pages((unsigned long)sg_virt(ctx->sg),
get_order(ctx->sg->length));
if (test_bit(HASH_FLAGS_SGS_ALLOCED, &dd->hash_flags))
kfree(ctx->sg);
ctx->sg = NULL;
dd->hash_flags &= ~(BIT(HASH_FLAGS_SGS_ALLOCED) |
BIT(HASH_FLAGS_SGS_COPIED));
if (!err && !ctx->error) {
s5p_hash_read_msg(req);
if (test_bit(HASH_FLAGS_FINAL, &dd->hash_flags))
s5p_hash_finish(req);
} else {
ctx->error = true;
}
spin_lock_irqsave(&dd->hash_lock, flags);
dd->hash_flags &= ~(BIT(HASH_FLAGS_BUSY) | BIT(HASH_FLAGS_FINAL) |
BIT(HASH_FLAGS_DMA_READY) |
BIT(HASH_FLAGS_OUTPUT_READY));
spin_unlock_irqrestore(&dd->hash_lock, flags);
if (req->base.complete)
req->base.complete(&req->base, err);
}
/**
* s5p_hash_handle_queue() - handle hash queue
* @dd: device s5p_aes_dev
* @req: AHASH request
*
* If req!=NULL enqueue it on dd->queue, if FLAGS_BUSY is not set on the
* device then processes the first request from the dd->queue
*
* Returns: see s5p_hash_final below.
*/
static int s5p_hash_handle_queue(struct s5p_aes_dev *dd,
struct ahash_request *req)
{
struct crypto_async_request *async_req, *backlog;
struct s5p_hash_reqctx *ctx;
unsigned long flags;
int err = 0, ret = 0;
retry:
spin_lock_irqsave(&dd->hash_lock, flags);
if (req)
ret = ahash_enqueue_request(&dd->hash_queue, req);
if (test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) {
spin_unlock_irqrestore(&dd->hash_lock, flags);
return ret;
}
backlog = crypto_get_backlog(&dd->hash_queue);
async_req = crypto_dequeue_request(&dd->hash_queue);
if (async_req)
set_bit(HASH_FLAGS_BUSY, &dd->hash_flags);
spin_unlock_irqrestore(&dd->hash_lock, flags);
if (!async_req)
return ret;
if (backlog)
backlog->complete(backlog, -EINPROGRESS);
req = ahash_request_cast(async_req);
dd->hash_req = req;
ctx = ahash_request_ctx(req);
err = s5p_hash_prepare_request(req, ctx->op_update);
if (err || !ctx->total)
goto out;
dev_dbg(dd->dev, "handling new req, op_update: %u, nbytes: %d\n",
ctx->op_update, req->nbytes);
s5p_ahash_dma_init(dd, SSS_HASHIN_INDEPENDENT);
if (ctx->digcnt)
s5p_hash_write_iv(req); /* restore hash IV */
if (ctx->op_update) { /* HASH_OP_UPDATE */
err = s5p_hash_xmit_dma(dd, ctx->total, ctx->finup);
if (err != -EINPROGRESS && ctx->finup && !ctx->error)
/* no final() after finup() */
err = s5p_hash_xmit_dma(dd, ctx->total, true);
} else { /* HASH_OP_FINAL */
err = s5p_hash_xmit_dma(dd, ctx->total, true);
}
out:
if (err != -EINPROGRESS) {
/* hash_tasklet_cb will not finish it, so do it here */
s5p_hash_finish_req(req, err);
req = NULL;
/*
* Execute next request immediately if there is anything
* in queue.
*/
goto retry;
}
return ret;
}
/**
* s5p_hash_tasklet_cb() - hash tasklet
* @data: ptr to s5p_aes_dev
*/
static void s5p_hash_tasklet_cb(unsigned long data)
{
struct s5p_aes_dev *dd = (struct s5p_aes_dev *)data;
if (!test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) {
s5p_hash_handle_queue(dd, NULL);
return;
}
if (test_bit(HASH_FLAGS_DMA_READY, &dd->hash_flags)) {
if (test_and_clear_bit(HASH_FLAGS_DMA_ACTIVE,
&dd->hash_flags)) {
s5p_hash_update_dma_stop(dd);
}
if (test_and_clear_bit(HASH_FLAGS_OUTPUT_READY,
&dd->hash_flags)) {
/* hash or semi-hash ready */
clear_bit(HASH_FLAGS_DMA_READY, &dd->hash_flags);
goto finish;
}
}
return;
finish:
/* finish curent request */
s5p_hash_finish_req(dd->hash_req, 0);
/* If we are not busy, process next req */
if (!test_bit(HASH_FLAGS_BUSY, &dd->hash_flags))
s5p_hash_handle_queue(dd, NULL);
}
/**
* s5p_hash_enqueue() - enqueue request
* @req: AHASH request
* @op: operation UPDATE (true) or FINAL (false)
*
* Returns: see s5p_hash_final below.
*/
static int s5p_hash_enqueue(struct ahash_request *req, bool op)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
struct s5p_hash_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
ctx->op_update = op;
return s5p_hash_handle_queue(tctx->dd, req);
}
/**
* s5p_hash_update() - process the hash input data
* @req: AHASH request
*
* If request will fit in buffer, copy it and return immediately
* else enqueue it with OP_UPDATE.
*
* Returns: see s5p_hash_final below.
*/
static int s5p_hash_update(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
if (!req->nbytes)
return 0;
if (ctx->bufcnt + req->nbytes <= BUFLEN) {
scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, req->src,
0, req->nbytes, 0);
ctx->bufcnt += req->nbytes;
return 0;
}
return s5p_hash_enqueue(req, true); /* HASH_OP_UPDATE */
}
/**
* s5p_hash_shash_digest() - calculate shash digest
* @tfm: crypto transformation
* @flags: tfm flags
* @data: input data
* @len: length of data
* @out: output buffer
*/
static int s5p_hash_shash_digest(struct crypto_shash *tfm, u32 flags,
const u8 *data, unsigned int len, u8 *out)
{
SHASH_DESC_ON_STACK(shash, tfm);
shash->tfm = tfm;
shash->flags = flags & ~CRYPTO_TFM_REQ_MAY_SLEEP;
return crypto_shash_digest(shash, data, len, out);
}
/**
* s5p_hash_final_shash() - calculate shash digest
* @req: AHASH request
*/
static int s5p_hash_final_shash(struct ahash_request *req)
{
struct s5p_hash_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
return s5p_hash_shash_digest(tctx->fallback, req->base.flags,
ctx->buffer, ctx->bufcnt, req->result);
}
/**
* s5p_hash_final() - close up hash and calculate digest
* @req: AHASH request
*
* Note: in final req->src do not have any data, and req->nbytes can be
* non-zero.
*
* If there were no input data processed yet and the buffered hash data is
* less than BUFLEN (64) then calculate the final hash immediately by using
* SW algorithm fallback.
*
* Otherwise enqueues the current AHASH request with OP_FINAL operation op
* and finalize hash message in HW. Note that if digcnt!=0 then there were
* previous update op, so there are always some buffered bytes in ctx->buffer,
* which means that ctx->bufcnt!=0
*
* Returns:
* 0 if the request has been processed immediately,
* -EINPROGRESS if the operation has been queued for later execution or is set
* to processing by HW,
* -EBUSY if queue is full and request should be resubmitted later,
* other negative values denotes an error.
*/
static int s5p_hash_final(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
ctx->finup = true;
if (ctx->error)
return -EINVAL; /* uncompleted hash is not needed */
if (!ctx->digcnt && ctx->bufcnt < BUFLEN)
return s5p_hash_final_shash(req);
return s5p_hash_enqueue(req, false); /* HASH_OP_FINAL */
}
/**
* s5p_hash_finup() - process last req->src and calculate digest
* @req: AHASH request containing the last update data
*
* Return values: see s5p_hash_final above.
*/
static int s5p_hash_finup(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
int err1, err2;
ctx->finup = true;
err1 = s5p_hash_update(req);
if (err1 == -EINPROGRESS || err1 == -EBUSY)
return err1;
/*
* final() has to be always called to cleanup resources even if
* update() failed, except EINPROGRESS or calculate digest for small
* size
*/
err2 = s5p_hash_final(req);
return err1 ?: err2;
}
/**
* s5p_hash_init() - initialize AHASH request contex
* @req: AHASH request
*
* Init async hash request context.
*/
static int s5p_hash_init(struct ahash_request *req)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
ctx->dd = tctx->dd;
ctx->error = false;
ctx->finup = false;
ctx->bufcnt = 0;
ctx->digcnt = 0;
ctx->total = 0;
ctx->skip = 0;
dev_dbg(tctx->dd->dev, "init: digest size: %d\n",
crypto_ahash_digestsize(tfm));
switch (crypto_ahash_digestsize(tfm)) {
case MD5_DIGEST_SIZE:
ctx->engine = SSS_HASH_ENGINE_MD5;
ctx->nregs = HASH_MD5_MAX_REG;
break;
case SHA1_DIGEST_SIZE:
ctx->engine = SSS_HASH_ENGINE_SHA1;
ctx->nregs = HASH_SHA1_MAX_REG;
break;
case SHA256_DIGEST_SIZE:
ctx->engine = SSS_HASH_ENGINE_SHA256;
ctx->nregs = HASH_SHA256_MAX_REG;
break;
default:
ctx->error = true;
return -EINVAL;
}
return 0;
}
/**
* s5p_hash_digest - calculate digest from req->src
* @req: AHASH request
*
* Return values: see s5p_hash_final above.
*/
static int s5p_hash_digest(struct ahash_request *req)
{
return s5p_hash_init(req) ?: s5p_hash_finup(req);
}
/**
* s5p_hash_cra_init_alg - init crypto alg transformation
* @tfm: crypto transformation
*/
static int s5p_hash_cra_init_alg(struct crypto_tfm *tfm)
{
struct s5p_hash_ctx *tctx = crypto_tfm_ctx(tfm);
const char *alg_name = crypto_tfm_alg_name(tfm);
tctx->dd = s5p_dev;
/* Allocate a fallback and abort if it failed. */
tctx->fallback = crypto_alloc_shash(alg_name, 0,
CRYPTO_ALG_NEED_FALLBACK);
if (IS_ERR(tctx->fallback)) {
pr_err("fallback alloc fails for '%s'\n", alg_name);
return PTR_ERR(tctx->fallback);
}
crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
sizeof(struct s5p_hash_reqctx) + BUFLEN);
return 0;
}
/**
* s5p_hash_cra_init - init crypto tfm
* @tfm: crypto transformation
*/
static int s5p_hash_cra_init(struct crypto_tfm *tfm)
{
return s5p_hash_cra_init_alg(tfm);
}
/**
* s5p_hash_cra_exit - exit crypto tfm
* @tfm: crypto transformation
*
* free allocated fallback
*/
static void s5p_hash_cra_exit(struct crypto_tfm *tfm)
{
struct s5p_hash_ctx *tctx = crypto_tfm_ctx(tfm);
crypto_free_shash(tctx->fallback);
tctx->fallback = NULL;
}
/**
* s5p_hash_export - export hash state
* @req: AHASH request
* @out: buffer for exported state
*/
static int s5p_hash_export(struct ahash_request *req, void *out)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
memcpy(out, ctx, sizeof(*ctx) + ctx->bufcnt);
return 0;
}
/**
* s5p_hash_import - import hash state
* @req: AHASH request
* @in: buffer with state to be imported from
*/
static int s5p_hash_import(struct ahash_request *req, const void *in)
{
struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
const struct s5p_hash_reqctx *ctx_in = in;
memcpy(ctx, in, sizeof(*ctx) + BUFLEN);
if (ctx_in->bufcnt > BUFLEN) {
ctx->error = true;
return -EINVAL;
}
ctx->dd = tctx->dd;
ctx->error = false;
return 0;
}
static struct ahash_alg algs_sha1_md5_sha256[] = {
{
.init = s5p_hash_init,
.update = s5p_hash_update,
.final = s5p_hash_final,
.finup = s5p_hash_finup,
.digest = s5p_hash_digest,
.export = s5p_hash_export,
.import = s5p_hash_import,
.halg.statesize = sizeof(struct s5p_hash_reqctx) + BUFLEN,
.halg.digestsize = SHA1_DIGEST_SIZE,
.halg.base = {
.cra_name = "sha1",
.cra_driver_name = "exynos-sha1",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_TYPE_AHASH |
CRYPTO_ALG_KERN_DRIVER_ONLY |
CRYPTO_ALG_ASYNC |
CRYPTO_ALG_NEED_FALLBACK,
.cra_blocksize = HASH_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct s5p_hash_ctx),
.cra_alignmask = SSS_HASH_DMA_ALIGN_MASK,
.cra_module = THIS_MODULE,
.cra_init = s5p_hash_cra_init,
.cra_exit = s5p_hash_cra_exit,
}
},
{
.init = s5p_hash_init,
.update = s5p_hash_update,
.final = s5p_hash_final,
.finup = s5p_hash_finup,
.digest = s5p_hash_digest,
.export = s5p_hash_export,
.import = s5p_hash_import,
.halg.statesize = sizeof(struct s5p_hash_reqctx) + BUFLEN,
.halg.digestsize = MD5_DIGEST_SIZE,
.halg.base = {
.cra_name = "md5",
.cra_driver_name = "exynos-md5",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_TYPE_AHASH |
CRYPTO_ALG_KERN_DRIVER_ONLY |
CRYPTO_ALG_ASYNC |
CRYPTO_ALG_NEED_FALLBACK,
.cra_blocksize = HASH_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct s5p_hash_ctx),
.cra_alignmask = SSS_HASH_DMA_ALIGN_MASK,
.cra_module = THIS_MODULE,
.cra_init = s5p_hash_cra_init,
.cra_exit = s5p_hash_cra_exit,
}
},
{
.init = s5p_hash_init,
.update = s5p_hash_update,
.final = s5p_hash_final,
.finup = s5p_hash_finup,
.digest = s5p_hash_digest,
.export = s5p_hash_export,
.import = s5p_hash_import,
.halg.statesize = sizeof(struct s5p_hash_reqctx) + BUFLEN,
.halg.digestsize = SHA256_DIGEST_SIZE,
.halg.base = {
.cra_name = "sha256",
.cra_driver_name = "exynos-sha256",
.cra_priority = 100,
.cra_flags = CRYPTO_ALG_TYPE_AHASH |
CRYPTO_ALG_KERN_DRIVER_ONLY |
CRYPTO_ALG_ASYNC |
CRYPTO_ALG_NEED_FALLBACK,
.cra_blocksize = HASH_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct s5p_hash_ctx),
.cra_alignmask = SSS_HASH_DMA_ALIGN_MASK,
.cra_module = THIS_MODULE,
.cra_init = s5p_hash_cra_init,
.cra_exit = s5p_hash_cra_exit,
}
}
};
static void s5p_set_aes(struct s5p_aes_dev *dev,
uint8_t *key, uint8_t *iv, unsigned int keylen)
{
......@@ -829,6 +2154,7 @@ static int s5p_aes_probe(struct platform_device *pdev)
struct samsung_aes_variant *variant;
struct s5p_aes_dev *pdata;
struct resource *res;
unsigned int hash_i;
if (s5p_dev)
return -EEXIST;
......@@ -837,12 +2163,34 @@ static int s5p_aes_probe(struct platform_device *pdev)
if (!pdata)
return -ENOMEM;
variant = find_s5p_sss_version(pdev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pdata->ioaddr))
return PTR_ERR(pdata->ioaddr);
variant = find_s5p_sss_version(pdev);
/*
* Note: HASH and PRNG uses the same registers in secss, avoid
* overwrite each other. This will drop HASH when CONFIG_EXYNOS_RNG
* is enabled in config. We need larger size for HASH registers in
* secss, current describe only AES/DES
*/
if (IS_ENABLED(CONFIG_CRYPTO_DEV_EXYNOS_HASH)) {
if (variant == &exynos_aes_data) {
res->end += 0x300;
pdata->use_hash = true;
}
}
pdata->res = res;
pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pdata->ioaddr)) {
if (!pdata->use_hash)
return PTR_ERR(pdata->ioaddr);
/* try AES without HASH */
res->end -= 0x300;
pdata->use_hash = false;
pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pdata->ioaddr))
return PTR_ERR(pdata->ioaddr);
}
pdata->clk = devm_clk_get(dev, "secss");
if (IS_ERR(pdata->clk)) {
......@@ -857,8 +2205,10 @@ static int s5p_aes_probe(struct platform_device *pdev)
}
spin_lock_init(&pdata->lock);
spin_lock_init(&pdata->hash_lock);
pdata->aes_ioaddr = pdata->ioaddr + variant->aes_offset;
pdata->io_hash_base = pdata->ioaddr + variant->hash_offset;
pdata->irq_fc = platform_get_irq(pdev, 0);
if (pdata->irq_fc < 0) {
......@@ -888,12 +2238,40 @@ static int s5p_aes_probe(struct platform_device *pdev)
goto err_algs;
}
if (pdata->use_hash) {
tasklet_init(&pdata->hash_tasklet, s5p_hash_tasklet_cb,
(unsigned long)pdata);
crypto_init_queue(&pdata->hash_queue, SSS_HASH_QUEUE_LENGTH);
for (hash_i = 0; hash_i < ARRAY_SIZE(algs_sha1_md5_sha256);
hash_i++) {
struct ahash_alg *alg;
alg = &algs_sha1_md5_sha256[hash_i];
err = crypto_register_ahash(alg);
if (err) {
dev_err(dev, "can't register '%s': %d\n",
alg->halg.base.cra_driver_name, err);
goto err_hash;
}
}
}
dev_info(dev, "s5p-sss driver registered\n");
return 0;
err_hash:
for (j = hash_i - 1; j >= 0; j--)
crypto_unregister_ahash(&algs_sha1_md5_sha256[j]);
tasklet_kill(&pdata->hash_tasklet);
res->end -= 0x300;
err_algs:
dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name, err);
if (i < ARRAY_SIZE(algs))
dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name,
err);
for (j = 0; j < i; j++)
crypto_unregister_alg(&algs[j]);
......@@ -920,9 +2298,16 @@ static int s5p_aes_remove(struct platform_device *pdev)
crypto_unregister_alg(&algs[i]);
tasklet_kill(&pdata->tasklet);
if (pdata->use_hash) {
for (i = ARRAY_SIZE(algs_sha1_md5_sha256) - 1; i >= 0; i--)
crypto_unregister_ahash(&algs_sha1_md5_sha256[i]);
clk_disable_unprepare(pdata->clk);
pdata->res->end -= 0x300;
tasklet_kill(&pdata->hash_tasklet);
pdata->use_hash = false;
}
clk_disable_unprepare(pdata->clk);
s5p_dev = NULL;
return 0;
......@@ -942,3 +2327,4 @@ module_platform_driver(s5p_aes_crypto);
MODULE_DESCRIPTION("S5PV210 AES hw acceleration support.");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Vladimir Zapolskiy <vzapolskiy@gmail.com>");
MODULE_AUTHOR("Kamil Konieczny <k.konieczny@partner.samsung.com>");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册