提交 bf8b20e1 编写于 作者: T Thierry MERLE 提交者: Mauro Carvalho Chehab

V4L/DVB (5528): Usbvision: reverting some i2c cleanups

usbvision-i2c.c: reverting some i2c cleanups in order to recover a safe state.
Acked-by: NDwaine Garden <DwaineGarden@rogers.com>
Signed-off-by: NThierry MERLE <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 c42cabef
......@@ -60,7 +60,7 @@ static inline int try_write_address(struct i2c_adapter *i2c_adap,
int i, ret = -1;
char buf[4];
usbvision = i2c_get_adapdata(i2c_adap);
usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap);
buf[0] = 0x00;
for (i = 0; i <= retries; i++) {
ret = (usbvision_i2c_write(usbvision, addr, buf, 1));
......@@ -85,7 +85,7 @@ static inline int try_read_address(struct i2c_adapter *i2c_adap,
int i, ret = -1;
char buf[4];
usbvision = i2c_get_adapdata(i2c_adap);
usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap);
for (i = 0; i <= retries; i++) {
ret = (usbvision_i2c_read(usbvision, addr, buf, 1));
if (ret == 1)
......@@ -158,7 +158,8 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
int i, ret;
unsigned char addr;
usbvision = i2c_get_adapdata(i2c_adap);
usbvision = (struct usb_usbvision *)i2c_get_adapdata(i2c_adap);
for (i = 0; i < num; i++) {
pmsg = &msgs[i];
ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr);
......@@ -205,6 +206,28 @@ static struct i2c_algorithm usbvision_algo = {
};
/*
* registering functions to load algorithms at runtime
*/
static int usbvision_i2c_usb_add_bus(struct i2c_adapter *adap)
{
PDEBUG(DBG_I2C, "I2C debugging is enabled [i2c]");
PDEBUG(DBG_I2C, "ALGO debugging is enabled [i2c]");
/* register new adapter to i2c module... */
adap->algo = &usbvision_algo;
adap->timeout = 100; /* default values, should */
adap->retries = 3; /* be replaced by defines */
i2c_add_adapter(adap);
PDEBUG(DBG_I2C,"i2c bus for %s registered", adap->name);
return 0;
}
/* ----------------------------------------------------------------------- */
/* usbvision specific I2C functions */
/* ----------------------------------------------------------------------- */
......@@ -213,28 +236,23 @@ static struct i2c_client i2c_client_template;
int usbvision_i2c_register(struct usb_usbvision *usbvision)
{
int ret;
usbvision->i2c_adap = i2c_adap_template;
usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
PDEBUG(DBG_I2C, "I2C debugging is enabled [i2c]");
memcpy(&usbvision->i2c_adap, &i2c_adap_template,
sizeof(struct i2c_adapter));
memcpy(&usbvision->i2c_client, &i2c_client_template,
sizeof(struct i2c_client));
sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name),
" #%d", usbvision->vdev->minor & 0x1f);
PDEBUG(DBG_I2C,"I2C Registering adaptername: %s", usbvision->i2c_adap.name);
i2c_set_adapdata(&usbvision->i2c_adap,usbvision);
if ((ret = i2c_add_adapter(&usbvision->i2c_adap)) < 0) {
PDEBUG(DBG_I2C,"could not add I2C adapter %s", usbvision->i2c_adap.name);
return ret;
}
PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
i2c_set_adapdata(&usbvision->i2c_adap, usbvision);
i2c_set_clientdata(&usbvision->i2c_client, usbvision);
/* TODO: use i2c_client for eeprom detection as an example... */
usbvision->i2c_client = i2c_client_template;
usbvision->i2c_client.adapter = &usbvision->i2c_adap;
if (usbvision_write_reg(usbvision, USBVISION_SER_MODE, USBVISION_IIC_LRNACK) < 0) {
printk(KERN_ERR "usbvision_i2c_register: can't write reg\n");
printk(KERN_ERR "usbvision_register: can't write reg\n");
return -EBUSY;
}
......@@ -253,7 +271,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
}
#endif
return 0;
return usbvision_i2c_usb_add_bus(&usbvision->i2c_adap);
}
int usbvision_i2c_unregister(struct usb_usbvision *usbvision)
......@@ -276,7 +294,8 @@ static int attach_inform(struct i2c_client *client)
{
struct usb_usbvision *usbvision;
usbvision = i2c_get_adapdata(client->adapter);
usbvision = (struct usb_usbvision *)i2c_get_adapdata(client->adapter);
switch (client->addr << 1) {
case 0x42 << 1:
case 0x43 << 1:
......@@ -329,7 +348,7 @@ static int detach_inform(struct i2c_client *client)
{
struct usb_usbvision *usbvision;
usbvision = i2c_get_adapdata(client->adapter);
usbvision = (struct usb_usbvision *)i2c_get_adapdata(client->adapter);
PDEBUG(DBG_I2C,"usbvision[%d] detaches %s", usbvision->nr, client->name);
return 0;
......@@ -508,8 +527,6 @@ static struct i2c_adapter i2c_adap_template = {
.owner = THIS_MODULE,
.name = "usbvision",
.id = I2C_HW_B_BT848, /* FIXME */
.algo = &usbvision_algo,
.algo_data = NULL,
.client_register = attach_inform,
.client_unregister = detach_inform,
#ifdef I2C_ADAP_CLASS_TV_ANALOG
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册