diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index 65a0ff352b98e3315a19418dc047396ee1fe0238..17490d255758b7cbb870c1bc39f02b7f2ad65ca5 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -160,22 +160,13 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
 	return;
 }
 
-#define DECLARE_JMB_DEV(name_str)			\
-	{						\
-		.name		= name_str,		\
-		.init_hwif	= init_hwif_jmicron,	\
-		.autodma	= AUTODMA,		\
-		.bootable	= ON_BOARD,		\
-		.enablebits	= { {0x40, 1, 1}, {0x40, 0x10, 0x10} }, \
-		.pio_mask	= ATA_PIO5,		\
-	}
-
-static ide_pci_device_t jmicron_chipsets[] __devinitdata = {
-	/* 0 */ DECLARE_JMB_DEV("JMB361"),
-	/* 1 */ DECLARE_JMB_DEV("JMB363"),
-	/* 2 */ DECLARE_JMB_DEV("JMB365"),
-	/* 3 */ DECLARE_JMB_DEV("JMB366"),
-	/* 4 */ DECLARE_JMB_DEV("JMB368"),
+static ide_pci_device_t jmicron_chipset __devinitdata = {
+	.name		= "JMB",
+	.init_hwif	= init_hwif_jmicron,
+	.autodma	= AUTODMA,
+	.bootable	= ON_BOARD,
+	.enablebits	= { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
+	.pio_mask	= ATA_PIO5,
 };
 
 /**
@@ -189,35 +180,29 @@ static ide_pci_device_t jmicron_chipsets[] __devinitdata = {
 
 static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_setup_pci_device(dev, &jmicron_chipsets[id->driver_data]);
+	ide_setup_pci_device(dev, &jmicron_chipset);
 	return 0;
 }
 
-/* If libata is configured, jmicron PCI quirk will configure it such
- * that the SATA ports are in AHCI function while the PATA ports are
- * in a separate IDE function.  In such cases, match device class and
- * attach only to IDE.  If libata isn't configured, keep the old
- * behavior for backward compatibility.
+/* All JMB PATA controllers have and will continue to have the same
+ * interface.  Matching vendor and device class is enough for all
+ * current and future controllers if the controller is programmed
+ * properly.
+ *
+ * If libata is configured, jmicron PCI quirk programs the controller
+ * into the correct mode.  If libata isn't configured, match known
+ * device IDs too to maintain backward compatibility.
  */
-#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
-#define JMB_CLASS	PCI_CLASS_STORAGE_IDE << 8
-#define JMB_CLASS_MASK	0xffff00
-#else
-#define JMB_CLASS	0
-#define JMB_CLASS_MASK	0
-#endif
-
 static struct pci_device_id jmicron_pci_tbl[] = {
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
-	  PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 0},
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
-	  PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 1},
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
-	  PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 2},
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
-	  PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 3},
-	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
-	  PCI_ANY_ID, PCI_ANY_ID, JMB_CLASS, JMB_CLASS_MASK, 4},
+#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE)
+	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) },
+	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) },
+	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) },
+	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) },
+	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) },
+#endif
+	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+	  PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 },
 	{ 0, },
 };