提交 bd1d23a8 编写于 作者: L Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix initrd regression.
  usb: Sparc build fix, make USB_ISP1760_OF depend on PPC_OF
  sparc64: remove online_page()
  sparc64: use compat_sys_utimes instead of home-grown local copy.
  sbus: Fix bpp driver build.
  sparc video: make blank use proper constant
  Revert "[SPARC64]: Wrap SMP IPIs with irq_enter()/irq_exit()."
  sparc: tcx.c remove unnecessary function
......@@ -865,21 +865,14 @@ void smp_call_function_client(int irq, struct pt_regs *regs)
void *info = call_data->info;
clear_softint(1 << irq);
irq_enter();
if (!call_data->wait) {
/* let initiator proceed after getting data */
atomic_inc(&call_data->finished);
}
func(info);
irq_exit();
if (call_data->wait) {
/* let initiator proceed only after completion */
func(info);
atomic_inc(&call_data->finished);
} else {
/* let initiator proceed after getting data */
atomic_inc(&call_data->finished);
func(info);
}
}
......@@ -1041,9 +1034,7 @@ void smp_receive_signal(int cpu)
void smp_receive_signal_client(int irq, struct pt_regs *regs)
{
irq_enter();
clear_softint(1 << irq);
irq_exit();
}
void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
......@@ -1051,8 +1042,6 @@ void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
struct mm_struct *mm;
unsigned long flags;
irq_enter();
clear_softint(1 << irq);
/* See if we need to allocate a new TLB context because
......@@ -1072,8 +1061,6 @@ void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
load_secondary_context(mm);
__flush_tlb_mm(CTX_HWBITS(mm->context),
SECONDARY_CONTEXT);
irq_exit();
}
void smp_new_mmu_context_version(void)
......@@ -1239,8 +1226,6 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
irq_enter();
preempt_disable();
__asm__ __volatile__("flushw");
......@@ -1253,8 +1238,6 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
prom_world(0);
preempt_enable();
irq_exit();
}
/* /proc/profile writes can call this, don't __init it please. */
......
......@@ -236,13 +236,6 @@ asmlinkage long sys32_getegid16(void)
/* 32-bit timeval and related flotsam. */
static long get_tv32(struct timeval *o, struct compat_timeval __user *i)
{
return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
(__get_user(o->tv_sec, &i->tv_sec) |
__get_user(o->tv_usec, &i->tv_usec)));
}
static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i)
{
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
......@@ -757,30 +750,6 @@ asmlinkage long sys32_settimeofday(struct compat_timeval __user *tv,
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
}
asmlinkage long sys32_utimes(char __user *filename,
struct compat_timeval __user *tvs)
{
struct timespec tv[2];
if (tvs) {
struct timeval ktvs[2];
if (get_tv32(&ktvs[0], tvs) ||
get_tv32(&ktvs[1], 1+tvs))
return -EFAULT;
if (ktvs[0].tv_usec < 0 || ktvs[0].tv_usec >= 1000000 ||
ktvs[1].tv_usec < 0 || ktvs[1].tv_usec >= 1000000)
return -EINVAL;
tv[0].tv_sec = ktvs[0].tv_sec;
tv[0].tv_nsec = 1000 * ktvs[0].tv_usec;
tv[1].tv_sec = ktvs[1].tv_sec;
tv[1].tv_nsec = 1000 * ktvs[1].tv_usec;
}
return do_utimes(AT_FDCWD, filename, tvs ? tv : NULL, 0);
}
/* These are here just in case some old sparc32 binary calls it. */
asmlinkage long sys32_pause(void)
{
......
......@@ -45,7 +45,7 @@ sys_call_table32:
/*120*/ .word compat_sys_readv, compat_sys_writev, sys32_settimeofday, sys32_fchown16, sys_fchmod
.word sys_nis_syscall, sys32_setreuid16, sys32_setregid16, sys_rename, sys_truncate
/*130*/ .word sys_ftruncate, sys_flock, compat_sys_lstat64, sys_nis_syscall, sys_nis_syscall
.word sys_nis_syscall, sys32_mkdir, sys_rmdir, sys32_utimes, compat_sys_stat64
.word sys_nis_syscall, sys32_mkdir, sys_rmdir, compat_sys_utimes, compat_sys_stat64
/*140*/ .word sys32_sendfile64, sys_nis_syscall, sys32_futex, sys_gettid, compat_sys_getrlimit
.word compat_sys_setrlimit, sys_pivot_root, sys32_prctl, sys_pciconfig_read, sys_pciconfig_write
/*150*/ .word sys_nis_syscall, sys_inotify_init, sys_inotify_add_watch, sys_poll, sys_getdents64
......
......@@ -771,6 +771,9 @@ static void __init find_ramdisk(unsigned long phys_base)
initrd_end = ramdisk_image + sparc_ramdisk_size;
lmb_reserve(initrd_start, initrd_end);
initrd_start += PAGE_OFFSET;
initrd_end += PAGE_OFFSET;
}
#endif
}
......@@ -2362,16 +2365,3 @@ void __flush_tlb_all(void)
__asm__ __volatile__("wrpr %0, 0, %%pstate"
: : "r" (pstate));
}
#ifdef CONFIG_MEMORY_HOTPLUG
void online_page(struct page *page)
{
ClearPageReserved(page);
init_page_count(page);
__free_page(page);
totalram_pages++;
num_physpages++;
}
#endif /* CONFIG_MEMORY_HOTPLUG */
......@@ -41,7 +41,7 @@
#define BPP_DELAY 100
static const unsigned BPP_MAJOR = LP_MAJOR;
static const char* dev_name = "bpp";
static const char *bpp_dev_name = "bpp";
/* When switching from compatibility to a mode where I can read, try
the following mode first. */
......
......@@ -129,7 +129,7 @@ config USB_ISP1760_PCI
config USB_ISP1760_OF
bool "Support for the OF platform bus"
depends on USB_ISP1760_HCD && OF
depends on USB_ISP1760_HCD && PPC_OF
---help---
Enables support for the device present on the PowerPC
OpenFirmware platform bus.
......
......@@ -329,7 +329,7 @@ static int __devinit bw2_probe(struct of_device *op, const struct of_device_id *
if (!info->screen_base)
goto out_unmap_regs;
bw2_blank(0, info);
bw2_blank(FB_BLANK_UNBLANK, info);
bw2_init_fix(info, linebytes);
......
......@@ -398,7 +398,7 @@ static int __devinit cg3_probe(struct of_device *op,
if (!info->screen_base)
goto out_unmap_regs;
cg3_blank(0, info);
cg3_blank(FB_BLANK_UNBLANK, info);
if (!of_find_property(dp, "width", NULL)) {
err = cg3_do_default_mode(par);
......
......@@ -767,7 +767,7 @@ static int __devinit cg6_probe(struct of_device *op,
cg6_bt_init(par);
cg6_chip_init(info);
cg6_blank(0, info);
cg6_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_regs;
......
......@@ -987,7 +987,7 @@ static int __devinit ffb_probe(struct of_device *op,
* chosen console, it will have video outputs off in
* the DAC.
*/
ffb_blank(0, info);
ffb_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_dac;
......
......@@ -601,7 +601,7 @@ static int __devinit leo_probe(struct of_device *op, const struct of_device_id *
leo_init_wids(info);
leo_init_hw(info);
leo_blank(0, info);
leo_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_regs;
......
......@@ -295,7 +295,7 @@ static int __devinit p9100_probe(struct of_device *op, const struct of_device_id
if (!info->screen_base)
goto out_unmap_regs;
p9100_blank(0, info);
p9100_blank(FB_BLANK_UNBLANK, info);
if (fb_alloc_cmap(&info->cmap, 256, 0))
goto out_unmap_screen;
......
......@@ -126,7 +126,7 @@ struct tcx_par {
};
/* Reset control plane so that WID is 8-bit plane. */
static void __tcx_set_control_plane (struct tcx_par *par)
static void __tcx_set_control_plane(struct tcx_par *par)
{
u32 __iomem *p, *pend;
......@@ -144,7 +144,7 @@ static void __tcx_set_control_plane (struct tcx_par *par)
}
}
static void tcx_reset (struct fb_info *info)
static void tcx_reset(struct fb_info *info)
{
struct tcx_par *par = (struct tcx_par *) info->par;
unsigned long flags;
......@@ -365,7 +365,8 @@ static void tcx_unmap_regs(struct of_device *op, struct fb_info *info,
info->screen_base, par->fbsize);
}
static int __devinit tcx_init_one(struct of_device *op)
static int __devinit tcx_probe(struct of_device *op,
const struct of_device_id *match)
{
struct device_node *dp = op->node;
struct fb_info *info;
......@@ -488,13 +489,6 @@ static int __devinit tcx_init_one(struct of_device *op)
return err;
}
static int __devinit tcx_probe(struct of_device *dev, const struct of_device_id *match)
{
struct of_device *op = to_of_device(&dev->dev);
return tcx_init_one(op);
}
static int __devexit tcx_remove(struct of_device *op)
{
struct fb_info *info = dev_get_drvdata(&op->dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册