提交 bcecd9bd 编写于 作者: J Jiang Zhe 提交者: Jaroslav Kysela

[ALSA] hda-codec - Add workaround for multiple HPs

Dell laptops have multiple HP jacks that can be used for multi-channel
outputs.  The current auto pincfg handles the speaker as the primary
output and thus cannot handle the multi-channel configuration for such
cases.  This patch adds a workaround to fix this issue by swapping the
HP and speaker during multi-channel setup routines.
Signed-off-by: NJiang Zhe <zhe.jiang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 7f9310c1
......@@ -2135,6 +2135,7 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
{
struct sigmatel_spec *spec = codec->spec;
int err;
int hp_speaker_swap = 0;
if ((err = snd_hda_parse_pin_def_config(codec,
&spec->autocfg,
......@@ -2143,6 +2144,24 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
if (! spec->autocfg.line_outs)
return 0; /* can't find valid pin config */
/* If we have no real line-out pin and multiple hp-outs, HPs should
* be set up as multi-channel outputs.
*/
if (spec->autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT &&
spec->autocfg.hp_outs > 1) {
/* Copy hp_outs to line_outs, backup line_outs in
* speaker_outs so that the following routines can handle
* HP pins as primary outputs.
*/
memcpy(spec->autocfg.speaker_pins, spec->autocfg.line_out_pins,
sizeof(spec->autocfg.line_out_pins));
spec->autocfg.speaker_outs = spec->autocfg.line_outs;
memcpy(spec->autocfg.line_out_pins, spec->autocfg.hp_pins,
sizeof(spec->autocfg.hp_pins));
spec->autocfg.line_outs = spec->autocfg.hp_outs;
hp_speaker_swap = 1;
}
if ((err = stac92xx_add_dyn_out_pins(codec, &spec->autocfg)) < 0)
return err;
if (spec->multiout.num_dacs == 0)
......@@ -2154,6 +2173,19 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out
if (err < 0)
return err;
if (hp_speaker_swap == 1) {
/* Restore the hp_outs and line_outs */
memcpy(spec->autocfg.hp_pins, spec->autocfg.line_out_pins,
sizeof(spec->autocfg.line_out_pins));
spec->autocfg.hp_outs = spec->autocfg.line_outs;
memcpy(spec->autocfg.line_out_pins, spec->autocfg.speaker_pins,
sizeof(spec->autocfg.speaker_pins));
spec->autocfg.line_outs = spec->autocfg.speaker_outs;
memset(spec->autocfg.speaker_pins, 0,
sizeof(spec->autocfg.speaker_pins));
spec->autocfg.speaker_outs = 0;
}
err = stac92xx_auto_create_hp_ctls(codec, &spec->autocfg);
if (err < 0)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册