V4L/DVB (9726): cx18: Restore buffers that have fallen out of the transfer rotation

Restore buffers that have fallen out of the transfer rotation, and check
for coherent mailbox data when processing a stale mailbox.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/cx18/cx18-driver.h

@@ -212,6 +212,7 @@ struct cx18_buffer {
 	dma_addr_t dma_handle;
 	u32 id;
 	unsigned long b_flags;
+	unsigned skipped;
 	char *buf;
 
 	u32 bytesused;

drivers/media/video/cx18/cx18-mailbox.c

@@ -120,7 +120,7 @@ static void dump_mb(struct cx18 *cx, struct cx18_mailbox *mb, char *name)
 
 static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
 {
-	u32 handle, mdl_ack_count;
+	u32 handle, mdl_ack_count, id;
 	struct cx18_mailbox *mb;
 	struct cx18_mdl_ack *mdl_ack;
 	struct cx18_stream *s;
@@ -133,19 +133,50 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
 
 	if (s == NULL) {
 		CX18_WARN("Got DMA done notification for unknown/inactive"
-			  " handle %d\n", handle);
+			  " handle %d, %s mailbox seq no %d\n", handle,
+			  (order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) ?
+			  "stale" : "good", mb->request);
 		return;
 	}
 
 	mdl_ack_count = mb->args[2];
 	mdl_ack = order->mdl_ack;
 	for (i = 0; i < mdl_ack_count; i++, mdl_ack++) {
-		buf = cx18_queue_get_buf(s, mdl_ack->id, mdl_ack->data_used);
-		CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name,
-				  mdl_ack->id);
+		id = mdl_ack->id;
+		/*
+		 * Simple integrity check for processing a stale (and possibly
+		 * inconsistent mailbox): make sure the buffer id is in the
+		 * valid range for the stream.
+		 *
+		 * We go through the trouble of dealing with stale mailboxes
+		 * because most of the time, the mailbox data is still valid and
+		 * unchanged (and in practice the firmware ping-pongs the
+		 * two mdl_ack buffers so mdl_acks are not stale).
+		 *
+		 * There are occasions when we get a half changed mailbox,
+		 * which this check catches for a handle & id mismatch.  If the
+		 * handle and id do correspond, the worst case is that we
+		 * completely lost the old buffer, but pick up the new buffer
+		 * early (but the new mdl_ack is guaranteed to be good in this
+		 * case as the firmware wouldn't point us to a new mdl_ack until
+		 * it's filled in).
+		 *
+		 * cx18_queue_get buf() will detect the lost buffers
+		 * and put them back in rotation eventually.
+		 */
+		if ((order->flags & CX18_F_EWO_MB_STALE_UPON_RECEIPT) &&
+		    !(id >= s->mdl_offset &&
+		      id < (s->mdl_offset + s->buffers))) {
+			CX18_WARN("Fell behind! Ignoring stale mailbox with "
+				  " inconsistent data. Lost buffer for mailbox "
+				  "seq no %d\n", mb->request);
+			break;
+		}
+		buf = cx18_queue_get_buf(s, id, mdl_ack->data_used);
+		CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
 		if (buf == NULL) {
 			CX18_WARN("Could not find buf %d for stream %s\n",
-				  mdl_ack->id, s->name);
+				  id, s->name);
 			continue;
 		}
 
@@ -158,6 +189,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_epu_work_order *order)
 					 buf->bytesused);
 
 			cx18_buf_sync_for_device(s, buf);
+			cx18_enqueue(s, buf, &s->q_free);
 
 			if (s->handle != CX18_INVALID_TASK_HANDLE &&
 			    test_bit(CX18_F_S_STREAMING, &s->s_flags))
@@ -257,9 +289,9 @@ static void mb_ack_irq(struct cx18 *cx, struct cx18_epu_work_order *order)
 	/* Don't ack if the RPU has gotten impatient and timed us out */
 	if (req != cx18_readl(cx, &ack_mb->request) ||
 	    req == cx18_readl(cx, &ack_mb->ack)) {
-		CX18_WARN("Possibly falling behind: %s self-ack'ed our incoming"
-			  " %s to EPU mailbox (sequence no. %u) while "
-			  "processing\n",
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
+				"incoming %s to EPU mailbox (sequence no. %u) "
+				"while processing\n",
 				rpu_str[order->rpu], rpu_str[order->rpu], req);
 		order->flags |= CX18_F_EWO_MB_STALE_WHILE_PROC;
 		return;
@@ -407,8 +439,9 @@ void cx18_api_epu_cmd_irq(struct cx18 *cx, int rpu)
 			   2 * sizeof(u32));
 
 	if (order_mb->request == order_mb->ack) {
-		CX18_WARN("Possibly falling behind: %s self-ack'ed our incoming"
-			  " %s to EPU mailbox (sequence no. %u)\n",
+		CX18_DEBUG_WARN("Possibly falling behind: %s self-ack'ed our "
+				"incoming %s to EPU mailbox (sequence no. %u)"
+				"\n",
 				rpu_str[rpu], rpu_str[rpu], order_mb->request);
 		dump_mb(cx, order_mb, "incoming");
 		order->flags = CX18_F_EWO_MB_STALE_UPON_RECEIPT;

drivers/media/video/cx18/cx18-queue.c

@@ -49,6 +49,7 @@ void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 		buf->bytesused = 0;
 		buf->readpos = 0;
 		buf->b_flags = 0;
+		buf->skipped = 0;
 	}
 	mutex_lock(&s->qlock);
 	list_add_tail(&buf->list, &q->list);
@@ -67,6 +68,7 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
 		list_del_init(q->list.next);
 		atomic_dec(&q->buffers);
 		q->bytesused -= buf->bytesused - buf->readpos;
+		buf->skipped = 0;
 	}
 	mutex_unlock(&s->qlock);
 	return buf;
@@ -76,34 +78,63 @@ struct cx18_buffer *cx18_queue_get_buf(struct cx18_stream *s, u32 id,
 	u32 bytesused)
 {
 	struct cx18 *cx = s->cx;
-	struct list_head *p;
+	struct cx18_buffer *buf;
+	struct cx18_buffer *ret = NULL;
+	struct list_head *p, *t;
+	LIST_HEAD(r);
 
 	mutex_lock(&s->qlock);
-	list_for_each(p, &s->q_free.list) {
-		struct cx18_buffer *buf =
-			list_entry(p, struct cx18_buffer, list);
+	list_for_each_safe(p, t, &s->q_free.list) {
+		buf = list_entry(p, struct cx18_buffer, list);
 
 		if (buf->id != id) {
-			CX18_DEBUG_HI_DMA("Skipping buffer %d searching for %d "
-					  "in stream %s q_free\n", buf->id, id,
-					  s->name);
+			buf->skipped++;
+			if (buf->skipped >= atomic_read(&s->q_free.buffers)-1) {
+				/* buffer must have fallen out of rotation */
+				atomic_dec(&s->q_free.buffers);
+				list_move_tail(&buf->list, &r);
+				CX18_WARN("Skipped %s, buffer %d, %d "
+					  "times - it must have dropped out of "
+					  "rotation\n", s->name, buf->id,
+					  buf->skipped);
+			}
 			continue;
 		}
 
 		buf->bytesused = bytesused;
-		if (s->type != CX18_ENC_STREAM_TYPE_TS) {
 		atomic_dec(&s->q_free.buffers);
+		if (s->type == CX18_ENC_STREAM_TYPE_TS) {
+			/*
+			 * TS doesn't use q_full, but for sweeping up lost
+			 * buffers, we want the TS to requeue the buffer just
+			 * before sending the MDL back to the firmware, so we
+			 * pull it off the list here.
+			 */
+			list_del_init(&buf->list);
+		} else {
 			atomic_inc(&s->q_full.buffers);
 			s->q_full.bytesused += buf->bytesused;
 			list_move_tail(&buf->list, &s->q_full.list);
 		}
 
-		mutex_unlock(&s->qlock);
-		return buf;
+		ret = buf;
+		break;
 	}
 	mutex_unlock(&s->qlock);
-	CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
-	return NULL;
+
+	/* Put lost buffers back into firmware transfer rotation */
+	while (!list_empty(&r)) {
+		buf = list_entry(r.next, struct cx18_buffer, list);
+		list_del_init(r.next);
+		cx18_enqueue(s, buf, &s->q_free);
+		cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
+		       (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+		       1, buf->id, s->buf_size);
+		CX18_INFO("Returning %s, buffer %d back to transfer rotation\n",
+			  s->name, buf->id);
+		/* and there was much rejoicing... */
+	}
+	return ret;
 }
 
 /* Move all buffers of a queue to q_free, while flushing the buffers */
@@ -118,7 +149,7 @@ static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
 	while (!list_empty(&q->list)) {
 		buf = list_entry(q->list.next, struct cx18_buffer, list);
 		list_move_tail(q->list.next, &s->q_free.list);
-		buf->bytesused = buf->readpos = buf->b_flags = 0;
+		buf->bytesused = buf->readpos = buf->b_flags = buf->skipped = 0;
 		atomic_inc(&s->q_free.buffers);
 	}
 	cx18_queue_init(q);