提交 bbecb1cf 编写于 作者: L Linus Torvalds

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - LPAE fixes for kernel-readonly regions

 - Fix for get_user_pages_fast on LPAE systems

 - avoid tying decompressor to a particular platform if DEBUG_LL is
   enabled

 - BUG if we attempt to return to userspace but the to-be-restored PSR
   value keeps us in privileged mode (defeating an issue that ftracetest
   found)

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: BUG if jumping to usermode address in kernel mode
  ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
  ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
  ARM: make decompressor debug output user selectable
  ARM: fix get_user_pages_fast
...@@ -1776,9 +1776,9 @@ config DEBUG_UART_8250_FLOW_CONTROL ...@@ -1776,9 +1776,9 @@ config DEBUG_UART_8250_FLOW_CONTROL
default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC default y if ARCH_EBSA110 || DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
config DEBUG_UNCOMPRESS config DEBUG_UNCOMPRESS
bool bool "Enable decompressor debugging via DEBUG_LL output"
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
!DEBUG_BRCMSTB_UART !DEBUG_BRCMSTB_UART
help help
......
...@@ -518,4 +518,22 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) ...@@ -518,4 +518,22 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
#endif #endif
.endm .endm
.macro bug, msg, line
#ifdef CONFIG_THUMB2_KERNEL
1: .inst 0xde02
#else
1: .inst 0xe7f001f2
#endif
#ifdef CONFIG_DEBUG_BUGVERBOSE
.pushsection .rodata.str, "aMS", %progbits, 1
2: .asciz "\msg"
.popsection
.pushsection __bug_table, "aw"
.align 2
.word 1b, 2b
.hword \line
.popsection
#endif
.endm
#endif /* __ASM_ASSEMBLER_H__ */ #endif /* __ASM_ASSEMBLER_H__ */
...@@ -232,6 +232,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) ...@@ -232,6 +232,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pte_valid_user(pte) \ #define pte_valid_user(pte) \
(pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte)) (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte))
static inline bool pte_access_permitted(pte_t pte, bool write)
{
pteval_t mask = L_PTE_PRESENT | L_PTE_USER;
pteval_t needed = mask;
if (write)
mask |= L_PTE_RDONLY;
return (pte_val(pte) & mask) == needed;
}
#define pte_access_permitted pte_access_permitted
#if __LINUX_ARM_ARCH__ < 6 #if __LINUX_ARM_ARCH__ < 6
static inline void __sync_icache_dcache(pte_t pteval) static inline void __sync_icache_dcache(pte_t pteval)
{ {
......
...@@ -300,6 +300,8 @@ ...@@ -300,6 +300,8 @@
mov r2, sp mov r2, sp
ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr ldr r1, [r2, #\offset + S_PSR] @ get calling cpsr
ldr lr, [r2, #\offset + S_PC]! @ get pc ldr lr, [r2, #\offset + S_PC]! @ get pc
tst r1, #0xcf
bne 1f
msr spsr_cxsf, r1 @ save in spsr_svc msr spsr_cxsf, r1 @ save in spsr_svc
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K) #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
@ We must avoid clrex due to Cortex-A15 erratum #830321 @ We must avoid clrex due to Cortex-A15 erratum #830321
...@@ -314,6 +316,7 @@ ...@@ -314,6 +316,7 @@
@ after ldm {}^ @ after ldm {}^
add sp, sp, #\offset + PT_REGS_SIZE add sp, sp, #\offset + PT_REGS_SIZE
movs pc, lr @ return & move spsr_svc into cpsr movs pc, lr @ return & move spsr_svc into cpsr
1: bug "Returning to usermode but unexpected PSR bits set?", \@
#elif defined(CONFIG_CPU_V7M) #elif defined(CONFIG_CPU_V7M)
@ V7M restore. @ V7M restore.
@ Note that we don't need to do clrex here as clearing the local @ Note that we don't need to do clrex here as clearing the local
...@@ -329,6 +332,8 @@ ...@@ -329,6 +332,8 @@
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC] @ get pc ldr lr, [sp, #\offset + S_PC] @ get pc
add sp, sp, #\offset + S_SP add sp, sp, #\offset + S_SP
tst r1, #0xcf
bne 1f
msr spsr_cxsf, r1 @ save in spsr_svc msr spsr_cxsf, r1 @ save in spsr_svc
@ We must avoid clrex due to Cortex-A15 erratum #830321 @ We must avoid clrex due to Cortex-A15 erratum #830321
...@@ -341,6 +346,7 @@ ...@@ -341,6 +346,7 @@
.endif .endif
add sp, sp, #PT_REGS_SIZE - S_SP add sp, sp, #PT_REGS_SIZE - S_SP
movs pc, lr @ return & move spsr_svc into cpsr movs pc, lr @ return & move spsr_svc into cpsr
1: bug "Returning to usermode but unexpected PSR bits set?", \@
#endif /* !CONFIG_THUMB2_KERNEL */ #endif /* !CONFIG_THUMB2_KERNEL */
.endm .endm
......
...@@ -129,8 +129,8 @@ static const struct prot_bits section_bits[] = { ...@@ -129,8 +129,8 @@ static const struct prot_bits section_bits[] = {
.val = PMD_SECT_USER, .val = PMD_SECT_USER,
.set = "USR", .set = "USR",
}, { }, {
.mask = L_PMD_SECT_RDONLY, .mask = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
.val = L_PMD_SECT_RDONLY, .val = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
.set = "ro", .set = "ro",
.clear = "RW", .clear = "RW",
#elif __LINUX_ARM_ARCH__ >= 6 #elif __LINUX_ARM_ARCH__ >= 6
......
...@@ -629,8 +629,8 @@ static struct section_perm ro_perms[] = { ...@@ -629,8 +629,8 @@ static struct section_perm ro_perms[] = {
.start = (unsigned long)_stext, .start = (unsigned long)_stext,
.end = (unsigned long)__init_begin, .end = (unsigned long)__init_begin,
#ifdef CONFIG_ARM_LPAE #ifdef CONFIG_ARM_LPAE
.mask = ~L_PMD_SECT_RDONLY, .mask = ~(L_PMD_SECT_RDONLY | PMD_SECT_AP2),
.prot = L_PMD_SECT_RDONLY, .prot = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
#else #else
.mask = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE), .mask = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
.prot = PMD_SECT_APX | PMD_SECT_AP_WRITE, .prot = PMD_SECT_APX | PMD_SECT_AP_WRITE,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册