提交 ba87d137 编写于 作者: L Lior Amsalem 提交者: Vinod Koul

dma: mv_xor: Reduce interrupts by enabling EOD only when needed

This commit unmasks the end-of-chain interrupt and removes the
end-of-descriptor command setting on all transactions, except those
explicitly flagged with DMA_PREP_INTERRUPT.

This allows to raise an interrupt only on chain completion, instead of
on each descriptor completion, which reduces interrupt count.
Signed-off-by: NLior Amsalem <alior@marvell.com>
Signed-off-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
上级 0e7488ed
...@@ -46,13 +46,16 @@ static void mv_xor_issue_pending(struct dma_chan *chan); ...@@ -46,13 +46,16 @@ static void mv_xor_issue_pending(struct dma_chan *chan);
((chan)->dmadev.dev) ((chan)->dmadev.dev)
static void mv_desc_init(struct mv_xor_desc_slot *desc, static void mv_desc_init(struct mv_xor_desc_slot *desc,
dma_addr_t addr, u32 byte_count) dma_addr_t addr, u32 byte_count,
enum dma_ctrl_flags flags)
{ {
struct mv_xor_desc *hw_desc = desc->hw_desc; struct mv_xor_desc *hw_desc = desc->hw_desc;
hw_desc->status = XOR_DESC_DMA_OWNED; hw_desc->status = XOR_DESC_DMA_OWNED;
hw_desc->phy_next_desc = 0; hw_desc->phy_next_desc = 0;
hw_desc->desc_command = XOR_DESC_EOD_INT_EN; /* Enable end-of-descriptor interrupts only for DMA_PREP_INTERRUPT */
hw_desc->desc_command = (flags & DMA_PREP_INTERRUPT) ?
XOR_DESC_EOD_INT_EN : 0;
hw_desc->phy_dest_addr = addr; hw_desc->phy_dest_addr = addr;
hw_desc->byte_count = byte_count; hw_desc->byte_count = byte_count;
} }
...@@ -107,7 +110,10 @@ static u32 mv_chan_get_intr_cause(struct mv_xor_chan *chan) ...@@ -107,7 +110,10 @@ static u32 mv_chan_get_intr_cause(struct mv_xor_chan *chan)
static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan) static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
{ {
u32 val = ~(XOR_INT_END_OF_DESC << (chan->idx * 16)); u32 val;
val = XOR_INT_END_OF_DESC | XOR_INT_END_OF_CHAIN | XOR_INT_STOPPED;
val = ~(val << (chan->idx * 16));
dev_dbg(mv_chan_to_devp(chan), "%s, val 0x%08x\n", __func__, val); dev_dbg(mv_chan_to_devp(chan), "%s, val 0x%08x\n", __func__, val);
writel_relaxed(val, XOR_INTR_CAUSE(chan)); writel_relaxed(val, XOR_INTR_CAUSE(chan));
} }
...@@ -510,7 +516,7 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, ...@@ -510,7 +516,7 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
if (sw_desc) { if (sw_desc) {
sw_desc->type = DMA_XOR; sw_desc->type = DMA_XOR;
sw_desc->async_tx.flags = flags; sw_desc->async_tx.flags = flags;
mv_desc_init(sw_desc, dest, len); mv_desc_init(sw_desc, dest, len, flags);
sw_desc->unmap_src_cnt = src_cnt; sw_desc->unmap_src_cnt = src_cnt;
sw_desc->unmap_len = len; sw_desc->unmap_len = len;
while (src_cnt--) while (src_cnt--)
......
...@@ -67,7 +67,7 @@ ...@@ -67,7 +67,7 @@
XOR_INT_ERR_WRPROT | XOR_INT_ERR_OWN | \ XOR_INT_ERR_WRPROT | XOR_INT_ERR_OWN | \
XOR_INT_ERR_PAR | XOR_INT_ERR_MBUS) XOR_INT_ERR_PAR | XOR_INT_ERR_MBUS)
#define XOR_INTR_MASK_VALUE (XOR_INT_END_OF_DESC | \ #define XOR_INTR_MASK_VALUE (XOR_INT_END_OF_DESC | XOR_INT_END_OF_CHAIN | \
XOR_INT_STOPPED | XOR_INTR_ERRORS) XOR_INT_STOPPED | XOR_INTR_ERRORS)
#define WINDOW_BASE(w) (0x50 + ((w) << 2)) #define WINDOW_BASE(w) (0x50 + ((w) << 2))
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册