From b967c88ed1b48bc353ea83e0cacb2249a3bb1a51 Mon Sep 17 00:00:00 2001 From: Thierry Vignaud Date: Wed, 11 Feb 2009 13:31:05 -0800 Subject: [PATCH] usb: kill prehistorical comments about USB_EHCI_HCD Remove old comments about USB_EHCI_HCD. Cc: Alan Stern Signed-off-by: Andrew Morton Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2c63bfb1f8d9..c1cfed7eefb5 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -24,10 +24,7 @@ config USB_EHCI_HCD The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to - configure this Host Controller Driver. At the time of this writing, - the primary implementation of EHCI is a chip from NEC, widely available - in add-on PCI cards, but implementations are in the works from other - vendors including Intel and Philips. Motherboard support is appearing. + configure this Host Controller Driver. EHCI controllers are packaged with "companion" host controllers (OHCI or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports -- GitLab