提交 b848169b 编写于 作者: S Sascha Hauer

ARM i.MX51: Add ipu clock support

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
上级 c67a3e09
...@@ -39,6 +39,9 @@ static struct clk periph_apm_clk; ...@@ -39,6 +39,9 @@ static struct clk periph_apm_clk;
static struct clk ahb_clk; static struct clk ahb_clk;
static struct clk ipg_clk; static struct clk ipg_clk;
static struct clk usboh3_clk; static struct clk usboh3_clk;
static struct clk emi_fast_clk;
static struct clk ipu_clk;
static struct clk mipi_hsc1_clk;
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
...@@ -688,6 +691,19 @@ static unsigned long clk_emi_slow_get_rate(struct clk *clk) ...@@ -688,6 +691,19 @@ static unsigned long clk_emi_slow_get_rate(struct clk *clk)
return clk_get_rate(clk->parent) / div; return clk_get_rate(clk->parent) / div;
} }
static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
{
unsigned long rate;
u32 reg, div;
reg = __raw_readl(MXC_CCM_CBCDR);
div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
rate = clk_get_rate(clk->parent) / div;
return rate;
}
/* External high frequency clock */ /* External high frequency clock */
static struct clk ckih_clk = { static struct clk ckih_clk = {
.get_rate = get_high_reference_clock_rate, .get_rate = get_high_reference_clock_rate,
...@@ -846,6 +862,109 @@ static struct clk emi_slow_clk = { ...@@ -846,6 +862,109 @@ static struct clk emi_slow_clk = {
.get_rate = clk_emi_slow_get_rate, .get_rate = clk_emi_slow_get_rate,
}; };
static int clk_ipu_enable(struct clk *clk)
{
u32 reg;
_clk_ccgr_enable(clk);
/* Enable handshake with IPU when certain clock rates are changed */
reg = __raw_readl(MXC_CCM_CCDR);
reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
__raw_writel(reg, MXC_CCM_CCDR);
/* Enable handshake with IPU when LPM is entered */
reg = __raw_readl(MXC_CCM_CLPCR);
reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
return 0;
}
static void clk_ipu_disable(struct clk *clk)
{
u32 reg;
_clk_ccgr_disable(clk);
/* Disable handshake with IPU whe dividers are changed */
reg = __raw_readl(MXC_CCM_CCDR);
reg |= MXC_CCM_CCDR_IPU_HS_MASK;
__raw_writel(reg, MXC_CCM_CCDR);
/* Disable handshake with IPU when LPM is entered */
reg = __raw_readl(MXC_CCM_CLPCR);
reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
}
static struct clk ahbmux1_clk = {
.parent = &ahb_clk,
.secondary = &ahb_max_clk,
.enable_reg = MXC_CCM_CCGR0,
.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
.enable = _clk_ccgr_enable,
.disable = _clk_ccgr_disable_inwait,
};
static struct clk ipu_sec_clk = {
.parent = &emi_fast_clk,
.secondary = &ahbmux1_clk,
};
static struct clk ddr_hf_clk = {
.parent = &pll1_sw_clk,
.get_rate = _clk_ddr_hf_get_rate,
};
static struct clk ddr_clk = {
.parent = &ddr_hf_clk,
};
/* clock definitions for MIPI HSC unit which has been removed
* from documentation, but not from hardware
*/
static int _clk_hsc_enable(struct clk *clk)
{
u32 reg;
_clk_ccgr_enable(clk);
/* Handshake with IPU when certain clock rates are changed. */
reg = __raw_readl(MXC_CCM_CCDR);
reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
__raw_writel(reg, MXC_CCM_CCDR);
reg = __raw_readl(MXC_CCM_CLPCR);
reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
return 0;
}
static void _clk_hsc_disable(struct clk *clk)
{
u32 reg;
_clk_ccgr_disable(clk);
/* No handshake with HSC as its not enabled. */
reg = __raw_readl(MXC_CCM_CCDR);
reg |= MXC_CCM_CCDR_HSC_HS_MASK;
__raw_writel(reg, MXC_CCM_CCDR);
reg = __raw_readl(MXC_CCM_CLPCR);
reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
}
static struct clk mipi_hsp_clk = {
.parent = &ipu_clk,
.enable_reg = MXC_CCM_CCGR4,
.enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
.enable = _clk_hsc_enable,
.disable = _clk_hsc_disable,
.secondary = &mipi_hsc1_clk,
};
#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \ #define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
static struct clk name = { \ static struct clk name = { \
.id = i, \ .id = i, \
...@@ -1112,6 +1231,23 @@ DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET, ...@@ -1112,6 +1231,23 @@ DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET, DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk); clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
/* IPU */
DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
&ddr_clk, NULL);
DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
NULL, NULL, &pll3_sw_clk, NULL);
DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &pll3_sw_clk, NULL);
#define _REGISTER_CLOCK(d, n, c) \ #define _REGISTER_CLOCK(d, n, c) \
{ \ { \
.dev_id = d, \ .dev_id = d, \
...@@ -1155,6 +1291,10 @@ static struct clk_lookup mx51_lookups[] = { ...@@ -1155,6 +1291,10 @@ static struct clk_lookup mx51_lookups[] = {
_REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
_REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
}; };
static struct clk_lookup mx53_lookups[] = { static struct clk_lookup mx53_lookups[] = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册