gpu: ipu-v3: Fix CSI selection for VDIC

The description of the CSI_SEL bit in the i.MX6 reference manual is
incorrect. It states "This bit defines which CSI is the input to the
IC. This bit is effective only if IC_INPUT is bit cleared".

From experiment it was found this is in fact not correct. The CSI_SEL
bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the
IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC
ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC
receives from in that case.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NSteve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

drivers/gpu/ipu-v3/ipu-common.c

@@ -725,15 +725,16 @@ void ipu_set_ic_src_mux(struct ipu_soc *ipu, int csi_id, bool vdi)
 	spin_lock_irqsave(&ipu->lock, flags);
 
 	val = ipu_cm_read(ipu, IPU_CONF);
-	if (vdi) {
+	if (vdi)
 		val |= IPU_CONF_IC_INPUT;
-	} else {
+	else
 		val &= ~IPU_CONF_IC_INPUT;
+
 	if (csi_id == 1)
 		val |= IPU_CONF_CSI_SEL;
 	else
 		val &= ~IPU_CONF_CSI_SEL;
-	}
+
 	ipu_cm_write(ipu, val, IPU_CONF);
 
 	spin_unlock_irqrestore(&ipu->lock, flags);