提交 b62cb8d9 编写于 作者: D David S. Miller

Merge branch 'cpsw'

Mugunthan V N says:

====================
Add DRA7xx and AM43xx platform support in cpsw-phy-sel driver

Adding DRA7xx and AM43xx platform support to cpsw-phy-sel driver to select
phy mode in control driver and fixing the uninitialized dev by initializing
to platform device structure pointer.

Changes from Initial version
* Added back the missing patch (1/3)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -2,7 +2,9 @@ TI CPSW Phy mode Selection Device Tree Bindings
-----------------------------------------------
Required properties:
- compatible : Should be "ti,am3352-cpsw-phy-sel"
- compatible : Should be "ti,am3352-cpsw-phy-sel" for am335x platform and
"ti,dra7xx-cpsw-phy-sel" for dra7xx platform
"ti,am43xx-cpsw-phy-sel" for am43xx platform
- reg : physical base address and size of the cpsw
registers map
- reg-names : names of the register map given in "reg" node
......
......@@ -29,6 +29,8 @@
#define AM33XX_GMII_SEL_RMII2_IO_CLK_EN BIT(7)
#define AM33XX_GMII_SEL_RMII1_IO_CLK_EN BIT(6)
#define GMII_SEL_MODE_MASK 0x3
struct cpsw_phy_sel_priv {
struct device *dev;
u32 __iomem *gmii_sel;
......@@ -65,7 +67,7 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv,
break;
};
mask = 0x3 << (slave * 2) | BIT(slave + 6);
mask = GMII_SEL_MODE_MASK << (slave * 2) | BIT(slave + 6);
mode <<= slave * 2;
if (priv->rmii_clock_external) {
......@@ -81,6 +83,55 @@ static void cpsw_gmii_sel_am3352(struct cpsw_phy_sel_priv *priv,
writel(reg, priv->gmii_sel);
}
static void cpsw_gmii_sel_dra7xx(struct cpsw_phy_sel_priv *priv,
phy_interface_t phy_mode, int slave)
{
u32 reg;
u32 mask;
u32 mode = 0;
reg = readl(priv->gmii_sel);
switch (phy_mode) {
case PHY_INTERFACE_MODE_RMII:
mode = AM33XX_GMII_SEL_MODE_RMII;
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
mode = AM33XX_GMII_SEL_MODE_RGMII;
break;
case PHY_INTERFACE_MODE_MII:
default:
mode = AM33XX_GMII_SEL_MODE_MII;
break;
};
switch (slave) {
case 0:
mask = GMII_SEL_MODE_MASK;
break;
case 1:
mask = GMII_SEL_MODE_MASK << 4;
mode <<= 4;
break;
default:
dev_err(priv->dev, "invalid slave number...\n");
return;
}
if (priv->rmii_clock_external)
dev_err(priv->dev, "RMII External clock is not supported\n");
reg &= ~mask;
reg |= mode;
writel(reg, priv->gmii_sel);
}
static struct platform_driver cpsw_phy_sel_driver;
static int match(struct device *dev, void *data)
{
......@@ -112,6 +163,14 @@ static const struct of_device_id cpsw_phy_sel_id_table[] = {
.compatible = "ti,am3352-cpsw-phy-sel",
.data = &cpsw_gmii_sel_am3352,
},
{
.compatible = "ti,dra7xx-cpsw-phy-sel",
.data = &cpsw_gmii_sel_dra7xx,
},
{
.compatible = "ti,am43xx-cpsw-phy-sel",
.data = &cpsw_gmii_sel_am3352,
},
{}
};
MODULE_DEVICE_TABLE(of, cpsw_phy_sel_id_table);
......@@ -132,6 +191,7 @@ static int cpsw_phy_sel_probe(struct platform_device *pdev)
return -ENOMEM;
}
priv->dev = &pdev->dev;
priv->cpsw_phy_sel = of_id->data;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "gmii-sel");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册