From b3b270054b80e6195b1d2b2ce082239911261839 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Tue, 26 Apr 2011 01:45:41 +0000 Subject: [PATCH] dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085 The 88e6085 has a few differences from the other devices in the port control registers, causing unknown multicast/broadcast packets to get dropped when using the standard port setup. At the same time update kconfig to clarify that the mv88e6085 is now supported. Signed-off-by: Peter Korsgaard Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- net/dsa/Kconfig | 4 ++-- net/dsa/mv88e6131.c | 26 +++++++++++++++++++++----- 2 files changed, 23 insertions(+), 7 deletions(-) diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig index 87bb5f4de0e8..c53ded2a98df 100644 --- a/net/dsa/Kconfig +++ b/net/dsa/Kconfig @@ -41,12 +41,12 @@ config NET_DSA_MV88E6XXX_NEED_PPU default n config NET_DSA_MV88E6131 - bool "Marvell 88E6095/6095F/6131 ethernet switch chip support" + bool "Marvell 88E6085/6095/6095F/6131 ethernet switch chip support" select NET_DSA_MV88E6XXX select NET_DSA_MV88E6XXX_NEED_PPU select NET_DSA_TAG_DSA ---help--- - This enables support for the Marvell 88E6095/6095F/6131 + This enables support for the Marvell 88E6085/6095/6095F/6131 ethernet switch chips. config NET_DSA_MV88E6123_61_65 diff --git a/net/dsa/mv88e6131.c b/net/dsa/mv88e6131.c index 3da418894efc..45f7411e90ba 100644 --- a/net/dsa/mv88e6131.c +++ b/net/dsa/mv88e6131.c @@ -207,8 +207,15 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * mode, but do not enable forwarding of unknown unicasts. */ val = 0x0433; - if (p == dsa_upstream_port(ds)) + if (p == dsa_upstream_port(ds)) { val |= 0x0104; + /* + * On 6085, unknown multicast forward is controlled + * here rather than in Port Control 2 register. + */ + if (ps->id == ID_6085) + val |= 0x0008; + } if (ds->dsa_port_mask & (1 << p)) val |= 0x0100; REG_WRITE(addr, 0x04, val); @@ -251,10 +258,19 @@ static int mv88e6131_setup_port(struct dsa_switch *ds, int p) * If this is the upstream port for this switch, enable * forwarding of unknown multicast addresses. */ - val = 0x0080 | dsa_upstream_port(ds); - if (p == dsa_upstream_port(ds)) - val |= 0x0040; - REG_WRITE(addr, 0x08, val); + if (ps->id == ID_6085) + /* + * on 6085, bits 3:0 are reserved, bit 6 control ARP + * mirroring, and multicast forward is handled in + * Port Control register. + */ + REG_WRITE(addr, 0x08, 0x0080); + else { + val = 0x0080 | dsa_upstream_port(ds); + if (p == dsa_upstream_port(ds)) + val |= 0x0040; + REG_WRITE(addr, 0x08, val); + } /* * Rate Control: disable ingress rate limiting. -- GitLab