diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 06b3411530f27f08ebeba156bdaf3f9babbec6d5..a34bca2dc52fdc7154ae55786e1e3c58786e774b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -256,12 +256,13 @@ struct ieee80211_mgd_work { /* flags used in struct ieee80211_if_managed.flags */ enum ieee80211_sta_flags { - IEEE80211_STA_PROBEREQ_POLL = BIT(3), - IEEE80211_STA_CONTROL_PORT = BIT(4), - IEEE80211_STA_WMM_ENABLED = BIT(5), - IEEE80211_STA_DISABLE_11N = BIT(6), - IEEE80211_STA_CSA_RECEIVED = BIT(7), - IEEE80211_STA_MFP_ENABLED = BIT(8), + IEEE80211_STA_BEACON_POLL = BIT(0), + IEEE80211_STA_CONNECTION_POLL = BIT(1), + IEEE80211_STA_CONTROL_PORT = BIT(2), + IEEE80211_STA_WMM_ENABLED = BIT(3), + IEEE80211_STA_DISABLE_11N = BIT(4), + IEEE80211_STA_CSA_RECEIVED = BIT(5), + IEEE80211_STA_MFP_ENABLED = BIT(6), }; /* flags for MLME request */ @@ -271,11 +272,16 @@ enum ieee80211_sta_request { struct ieee80211_if_managed { struct timer_list timer; + struct timer_list conn_mon_timer; + struct timer_list bcn_mon_timer; struct timer_list chswitch_timer; struct work_struct work; + struct work_struct monitor_work; struct work_struct chswitch_work; struct work_struct beacon_loss_work; + unsigned long probe_timeout; + struct mutex mtx; struct ieee80211_bss *associated; struct list_head work_list; @@ -292,8 +298,6 @@ struct ieee80211_if_managed { unsigned long request; - unsigned long last_beacon; - unsigned int flags; u32 beacon_crc; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c1114bb8095b1df6842bc612631c7fa8e5267782..18dad229344ca9205e3de35d1c87116c13807499 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -31,8 +31,23 @@ #define IEEE80211_AUTH_MAX_TRIES 3 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) #define IEEE80211_ASSOC_MAX_TRIES 3 -#define IEEE80211_MONITORING_INTERVAL (2 * HZ) -#define IEEE80211_PROBE_WAIT (HZ / 5) + +/* + * beacon loss detection timeout + * XXX: should depend on beacon interval + */ +#define IEEE80211_BEACON_LOSS_TIME (2 * HZ) +/* + * Time the connection can be idle before we probe + * it to see if we can still talk to the AP. + */ +#define IEEE80211_CONNECTION_IDLE_TIME (2 * HZ) +/* + * Time we wait for a probe response after sending + * a probe request because of beacon loss or for + * checking the connection still works. + */ +#define IEEE80211_PROBE_WAIT (HZ / 5) #define TMR_RUNNING_TIMER 0 #define TMR_RUNNING_CHANSW 1 @@ -92,6 +107,15 @@ static void run_again(struct ieee80211_if_managed *ifmgd, mod_timer(&ifmgd->timer, timeout); } +static void mod_beacon_timer(struct ieee80211_sub_if_data *sdata) +{ + if (sdata->local->hw.flags & IEEE80211_HW_BEACON_FILTER) + return; + + mod_timer(&sdata->u.mgd.bcn_mon_timer, + round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME)); +} + static int ecw2cw(int ecw) { return (1 << ecw) - 1; @@ -666,7 +690,8 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) if (count == 1 && found->u.mgd.powersave && found->u.mgd.associated && list_empty(&found->u.mgd.work_list) && - !(found->u.mgd.flags & IEEE80211_STA_PROBEREQ_POLL)) { + !(found->u.mgd.flags & (IEEE80211_STA_BEACON_POLL | + IEEE80211_STA_CONNECTION_POLL))) { s32 beaconint_us; if (latency < 0) @@ -872,6 +897,10 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->u.mgd.associated = bss; memcpy(sdata->u.mgd.bssid, bss->cbss.bssid, ETH_ALEN); + /* just to be sure */ + sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL | + IEEE80211_STA_BEACON_POLL); + ieee80211_led_assoc(local, 1); sdata->vif.bss_conf.assoc = 1; @@ -983,16 +1012,21 @@ ieee80211_authenticate(struct ieee80211_sub_if_data *sdata, return RX_MGMT_NONE; } -static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, - const u8 *bssid, bool deauth) +static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; struct sta_info *sta; u32 changed = 0, config_changed = 0; + u8 bssid[ETH_ALEN]; ASSERT_MGD_MTX(ifmgd); + if (WARN_ON(!ifmgd->associated)) + return; + + memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN); + ifmgd->associated = NULL; memset(ifmgd->bssid, 0, ETH_ALEN); @@ -1112,32 +1146,22 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, * from AP because we know that the connection is working both ways * at that time. But multicast frames (and hence also beacons) must * be ignored here, because we need to trigger the timer during - * data idle periods for sending the periodical probe request to - * the AP. + * data idle periods for sending the periodic probe request to the + * AP we're connected to. */ - if (!is_multicast_ether_addr(hdr->addr1)) - mod_timer(&sdata->u.mgd.timer, - jiffies + IEEE80211_MONITORING_INTERVAL); + if (is_multicast_ether_addr(hdr->addr1)) + return; + + mod_timer(&sdata->u.mgd.conn_mon_timer, + round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); } -void ieee80211_beacon_loss_work(struct work_struct *work) +static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, + bool beacon) { - struct ieee80211_sub_if_data *sdata = - container_of(work, struct ieee80211_sub_if_data, - u.mgd.beacon_loss_work); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; const u8 *ssid; - - /* - * The driver has already reported this event and we have - * already sent a probe request. Maybe the AP died and the - * driver keeps reporting until we disassociate... We have - * to ignore that because otherwise we would continually - * reset the timer and never check whether we received a - * probe response! - */ - if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) - return; + bool already = false; mutex_lock(&ifmgd->mtx); @@ -1145,12 +1169,35 @@ void ieee80211_beacon_loss_work(struct work_struct *work) goto out; #ifdef CONFIG_MAC80211_VERBOSE_DEBUG - if (net_ratelimit()) - printk(KERN_DEBUG "%s: driver reports beacon loss from AP " + if (beacon && net_ratelimit()) + printk(KERN_DEBUG "%s: detected beacon loss from AP " "- sending probe request\n", sdata->dev->name); #endif - ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; + /* + * The driver/our work has already reported this event or the + * connection monitoring has kicked in and we have already sent + * a probe request. Or maybe the AP died and the driver keeps + * reporting until we disassociate... + * + * In either case we have to ignore the current call to this + * function (except for setting the correct probe reason bit) + * because otherwise we would reset the timer every time and + * never check whether we received a probe response! + */ + if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | + IEEE80211_STA_CONNECTION_POLL)) + already = true; + + if (beacon) + ifmgd->flags |= IEEE80211_STA_BEACON_POLL; + else + ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; + + if (already) + goto out; + + ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT; mutex_lock(&sdata->local->iflist_mtx); ieee80211_recalc_ps(sdata->local, -1); @@ -1160,11 +1207,21 @@ void ieee80211_beacon_loss_work(struct work_struct *work) ieee80211_send_probe_req(sdata, ifmgd->associated->cbss.bssid, ssid + 2, ssid[1], NULL, 0); - run_again(ifmgd, jiffies + IEEE80211_PROBE_WAIT); + run_again(ifmgd, ifmgd->probe_timeout); + out: mutex_unlock(&ifmgd->mtx); } +void ieee80211_beacon_loss_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.mgd.beacon_loss_work); + + ieee80211_mgd_probe_ap(sdata, true); +} + void ieee80211_beacon_loss(struct ieee80211_vif *vif) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); @@ -1278,7 +1335,7 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, sdata->dev->name, bssid, reason_code); if (!wk) { - ieee80211_set_disassoc(sdata, bssid, true); + ieee80211_set_disassoc(sdata); } else { list_del(&wk->list); kfree(wk); @@ -1311,7 +1368,7 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n", sdata->dev->name, reason_code); - ieee80211_set_disassoc(sdata, ifmgd->associated->cbss.bssid, false); + ieee80211_set_disassoc(sdata); return RX_MGMT_CFG80211_DISASSOC; } @@ -1412,9 +1469,6 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, return RX_MGMT_NONE; } - /* update new sta with its last rx activity */ - sta->last_rx = jiffies; - set_sta_flags(sta, WLAN_STA_AUTH | WLAN_STA_ASSOC | WLAN_STA_ASSOC_AP); if (!(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) @@ -1517,10 +1571,11 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, ieee80211_set_associated(sdata, wk->bss, changed); /* - * initialise the time of last beacon to be the association time, - * otherwise beacon loss check will trigger immediately + * Start timer to probe the connection to the AP now. + * Also start the timer that will detect beacon loss. */ - ifmgd->last_beacon = jiffies; + ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); + mod_beacon_timer(sdata); list_del(&wk->list); kfree(wk); @@ -1604,11 +1659,22 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, if (ifmgd->associated && memcmp(mgmt->bssid, ifmgd->associated->cbss.bssid, ETH_ALEN) == 0 && - ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) { - ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL; + ifmgd->flags & (IEEE80211_STA_BEACON_POLL | + IEEE80211_STA_CONNECTION_POLL)) { + ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL | + IEEE80211_STA_BEACON_POLL); mutex_lock(&sdata->local->iflist_mtx); ieee80211_recalc_ps(sdata->local, -1); mutex_unlock(&sdata->local->iflist_mtx); + /* + * We've received a probe response, but are not sure whether + * we have or will be receiving any beacons or data, so let's + * schedule the timers again, just in case. + */ + mod_beacon_timer(sdata); + mod_timer(&ifmgd->conn_mon_timer, + round_jiffies_up(jiffies + + IEEE80211_CONNECTION_IDLE_TIME)); } } @@ -1658,27 +1724,41 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (rx_status->freq != local->hw.conf.channel->center_freq) return; - if (WARN_ON(!ifmgd->associated)) + /* + * We might have received a number of frames, among them a + * disassoc frame and a beacon... + */ + if (!ifmgd->associated) return; bssid = ifmgd->associated->cbss.bssid; - if (WARN_ON(memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0)) + /* + * And in theory even frames from a different AP we were just + * associated to a split-second ago! + */ + if (memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0) return; - if (ifmgd->flags & IEEE80211_STA_PROBEREQ_POLL) { + if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { #ifdef CONFIG_MAC80211_VERBOSE_DEBUG if (net_ratelimit()) { printk(KERN_DEBUG "%s: cancelling probereq poll due " "to a received beacon\n", sdata->dev->name); } #endif - ifmgd->flags &= ~IEEE80211_STA_PROBEREQ_POLL; + ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; mutex_lock(&local->iflist_mtx); ieee80211_recalc_ps(local, -1); mutex_unlock(&local->iflist_mtx); } + /* + * Push the beacon loss detection into the future since + * we are processing a beacon from the AP just now. + */ + mod_beacon_timer(sdata); + ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, len - baselen, &elems, @@ -1980,6 +2060,37 @@ static void ieee80211_sta_work(struct work_struct *work) /* then process the rest of the work */ mutex_lock(&ifmgd->mtx); + if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | + IEEE80211_STA_CONNECTION_POLL) && + ifmgd->associated) { + if (time_is_after_jiffies(ifmgd->probe_timeout)) + run_again(ifmgd, ifmgd->probe_timeout); + else { + u8 bssid[ETH_ALEN]; + /* + * We actually lost the connection ... or did we? + * Let's make sure! + */ + ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL | + IEEE80211_STA_BEACON_POLL); + memcpy(bssid, ifmgd->associated->cbss.bssid, ETH_ALEN); + printk(KERN_DEBUG "No probe response from AP %pM" + " after %dms, disconnecting.\n", + bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ); + ieee80211_set_disassoc(sdata); + mutex_unlock(&ifmgd->mtx); + /* + * must be outside lock due to cfg80211, + * but that's not a problem. + */ + ieee80211_send_deauth_disassoc(sdata, bssid, + IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, + NULL); + mutex_lock(&ifmgd->mtx); + } + } + list_for_each_entry(wk, &ifmgd->work_list, list) { if (wk->state != IEEE80211_MGD_STATE_IDLE) { anybusy = true; @@ -2067,15 +2178,51 @@ static void ieee80211_sta_work(struct work_struct *work) ieee80211_recalc_idle(local); } +static void ieee80211_sta_bcn_mon_timer(unsigned long data) +{ + struct ieee80211_sub_if_data *sdata = + (struct ieee80211_sub_if_data *) data; + struct ieee80211_local *local = sdata->local; + + if (local->quiescing) + return; + + queue_work(sdata->local->hw.workqueue, + &sdata->u.mgd.beacon_loss_work); +} + +static void ieee80211_sta_conn_mon_timer(unsigned long data) +{ + struct ieee80211_sub_if_data *sdata = + (struct ieee80211_sub_if_data *) data; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_local *local = sdata->local; + + if (local->quiescing) + return; + + queue_work(local->hw.workqueue, &ifmgd->monitor_work); +} + +static void ieee80211_sta_monitor_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + u.mgd.monitor_work); + + ieee80211_mgd_probe_ap(sdata, false); +} + static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) { if (sdata->vif.type == NL80211_IFTYPE_STATION) { - /* - * Need to update last_beacon to avoid beacon loss - * test to trigger. - */ - sdata->u.mgd.last_beacon = jiffies; + sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL | + IEEE80211_STA_CONNECTION_POLL); + /* let's probe the connection once */ + queue_work(sdata->local->hw.workqueue, + &sdata->u.mgd.monitor_work); + /* and do all the other regular work too */ queue_work(sdata->local->hw.workqueue, &sdata->u.mgd.work); } @@ -2100,6 +2247,11 @@ void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata) cancel_work_sync(&ifmgd->chswitch_work); if (del_timer_sync(&ifmgd->chswitch_timer)) set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running); + + cancel_work_sync(&ifmgd->monitor_work); + /* these will just be re-established on connection */ + del_timer_sync(&ifmgd->conn_mon_timer); + del_timer_sync(&ifmgd->bcn_mon_timer); } void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) @@ -2120,10 +2272,15 @@ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) ifmgd = &sdata->u.mgd; INIT_WORK(&ifmgd->work, ieee80211_sta_work); + INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); INIT_WORK(&ifmgd->beacon_loss_work, ieee80211_beacon_loss_work); setup_timer(&ifmgd->timer, ieee80211_sta_timer, (unsigned long) sdata); + setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, + (unsigned long) sdata); + setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, + (unsigned long) sdata); setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, (unsigned long) sdata); skb_queue_head_init(&ifmgd->skb_queue); @@ -2323,7 +2480,7 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) { bssid = req->bss->bssid; - ieee80211_set_disassoc(sdata, bssid, true); + ieee80211_set_disassoc(sdata); } else list_for_each_entry(wk, &ifmgd->work_list, list) { if (&wk->bss->cbss == req->bss) { bssid = req->bss->bssid; @@ -2365,7 +2522,7 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, return -ENOLINK; } - ieee80211_set_disassoc(sdata, req->bss->bssid, false); + ieee80211_set_disassoc(sdata); mutex_unlock(&ifmgd->mtx); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index fe6b990595315a241644a6ed6b116ada1db97258..b513fb7911538ec158e5844a6ea47b6257a358c9 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -833,28 +833,22 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx) if (!sta) return RX_CONTINUE; - /* Update last_rx only for IBSS packets which are for the current - * BSSID to avoid keeping the current IBSS network alive in cases where - * other STAs are using different BSSID. */ + /* + * Update last_rx only for IBSS packets which are for the current + * BSSID to avoid keeping the current IBSS network alive in cases + * where other STAs start using different BSSID. + */ if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) { u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len, NL80211_IFTYPE_ADHOC); if (compare_ether_addr(bssid, rx->sdata->u.ibss.bssid) == 0) sta->last_rx = jiffies; - } else - if (!is_multicast_ether_addr(hdr->addr1) || - rx->sdata->vif.type == NL80211_IFTYPE_STATION) { - /* Update last_rx only for unicast frames in order to prevent - * the Probe Request frames (the only broadcast frames from a - * STA in infrastructure mode) from keeping a connection alive. + } else if (!is_multicast_ether_addr(hdr->addr1)) { + /* * Mesh beacons will update last_rx when if they are found to * match the current local configuration when processed. */ - if (rx->sdata->vif.type == NL80211_IFTYPE_STATION && - ieee80211_is_beacon(hdr->frame_control)) { - rx->sdata->u.mgd.last_beacon = jiffies; - } else - sta->last_rx = jiffies; + sta->last_rx = jiffies; } if (!(rx->flags & IEEE80211_RX_RA_MATCH))