From b282d87332f5b3c2ac2e289f772b33067e4be77b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 14 Jun 2009 19:10:40 -0300 Subject: [PATCH] V4L/DVB (12080): gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320) gspca_ov519: Fix ov518+ with OV7620AE (Trust spacecam 320) Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 91 +++++++++++++++++++------------ 1 file changed, 55 insertions(+), 36 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 1f8e2613ecc5..3aebc744368d 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -269,37 +269,43 @@ static const struct v4l2_pix_format ov519_sif_mode[] = { .priv = 0}, }; +/* Note some of the sizeimage values for the ov511 / ov518 may seem + larger then necessary, however they need to be this big as the ov511 / + ov518 always fills the entire isoc frame, using 0 padding bytes when + it doesn't have any data. So with low framerates the amount of data + transfered can become quite large (libv4l will remove all the 0 padding + in userspace). */ static const struct v4l2_pix_format ov518_vga_mode[] = { {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 590, + .sizeimage = 320 * 240 * 3, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {640, 480, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 640, - .sizeimage = 640 * 480 * 3 / 8 + 590, + .sizeimage = 640 * 480 * 2, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; static const struct v4l2_pix_format ov518_sif_mode[] = { {160, 120, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 40000, + .sizeimage = 70000, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 3}, {176, 144, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 40000, + .sizeimage = 70000, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 320, - .sizeimage = 320 * 240 * 3 / 8 + 590, + .sizeimage = 320 * 240 * 3, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 2}, {352, 288, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE, .bytesperline = 352, - .sizeimage = 352 * 288 * 3 / 8 + 590, + .sizeimage = 352 * 288 * 3, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 0}, }; @@ -319,12 +325,12 @@ static const struct v4l2_pix_format ov511_vga_mode[] = { static const struct v4l2_pix_format ov511_sif_mode[] = { {160, 120, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, .bytesperline = 160, - .sizeimage = 40000, + .sizeimage = 70000, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 3}, {176, 144, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, .bytesperline = 176, - .sizeimage = 40000, + .sizeimage = 70000, .colorspace = V4L2_COLORSPACE_JPEG, .priv = 1}, {320, 240, V4L2_PIX_FMT_OV511, V4L2_FIELD_NONE, @@ -698,7 +704,7 @@ static const struct ov_i2c_regvals norm_7620[] = { { 0x23, 0x00 }, { 0x26, 0xa2 }, { 0x27, 0xea }, - { 0x28, 0x20 }, + { 0x28, 0x22 }, /* Was 0x20, bit1 enables a 2x gain which we need */ { 0x29, 0x00 }, { 0x2a, 0x10 }, { 0x2b, 0x00 }, @@ -1525,7 +1531,6 @@ static int ov8xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -1562,15 +1567,13 @@ static int ov7xx0_configure(struct sd *sd) } } else if ((rc & 3) == 1) { /* I don't know what's different about the 76BE yet. */ - if (i2c_r(sd, 0x15) & 1) + if (i2c_r(sd, 0x15) & 1) { PDEBUG(D_PROBE, "Sensor is an OV7620AE"); - else + sd->sensor = SEN_OV7620; + } else { PDEBUG(D_PROBE, "Sensor is an OV76BE"); - - /* OV511+ will return all zero isoc data unless we - * configure the sensor as a 7620. Someone needs to - * find the exact reg. setting that causes this. */ - sd->sensor = SEN_OV76BE; + sd->sensor = SEN_OV76BE; + } } else if ((rc & 3) == 0) { /* try to read product id registers */ high = i2c_r(sd, 0x0a); @@ -1616,7 +1619,6 @@ static int ov7xx0_configure(struct sd *sd) } /* Set sensor-specific vars */ -/* sd->sif = 0; already done */ return 0; } @@ -2198,11 +2200,11 @@ static int ov511_mode_init_regs(struct sd *sd) for more sensors we need to do this for them too */ case SEN_OV7620: case SEN_OV7640: + case SEN_OV76BE: if (sd->gspca_dev.width == 320) interlaced = 1; /* Fall through */ case SEN_OV6630: - case SEN_OV76BE: case SEN_OV7610: case SEN_OV7670: switch (sd->frame_rate) { @@ -2268,7 +2270,19 @@ static int ov511_mode_init_regs(struct sd *sd) */ static int ov518_mode_init_regs(struct sd *sd) { - int hsegs, vsegs; + int hsegs, vsegs, packet_size; + struct usb_host_interface *alt; + struct usb_interface *intf; + + intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface); + alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt); + if (!alt) { + PDEBUG(D_ERR, "Couldn't get altsetting"); + return -EIO; + } + + packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize); + ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2); /******** Set the mode ********/ @@ -2305,20 +2319,30 @@ static int ov518_mode_init_regs(struct sd *sd) /* Windows driver does this here; who knows why */ reg_w(sd, 0x2f, 0x80); - /******** Set the framerate (to 30 FPS) ********/ - if (sd->bridge == BRIDGE_OV518PLUS) - sd->clockdiv = 1; - else - sd->clockdiv = 0; + /******** Set the framerate ********/ + sd->clockdiv = 1; /* Mode independent, but framerate dependent, regs */ - reg_w(sd, 0x51, 0x04); /* Clock divider; lower==faster */ + /* 0x51: Clock divider; Only works on some cams which use 2 crystals */ + reg_w(sd, 0x51, 0x04); reg_w(sd, 0x22, 0x18); reg_w(sd, 0x23, 0xff); - if (sd->bridge == BRIDGE_OV518PLUS) - reg_w(sd, 0x21, 0x19); - else + if (sd->bridge == BRIDGE_OV518PLUS) { + switch (sd->sensor) { + case SEN_OV7620: + if (sd->gspca_dev.width == 320) { + reg_w(sd, 0x20, 0x00); + reg_w(sd, 0x21, 0x19); + } else { + reg_w(sd, 0x20, 0x60); + reg_w(sd, 0x21, 0x1f); + } + break; + default: + reg_w(sd, 0x21, 0x19); + } + } else reg_w(sd, 0x71, 0x17); /* Compression-related? */ /* FIXME: Sensor-specific */ @@ -2537,21 +2561,16 @@ static int mode_init_ov_sensor_regs(struct sd *sd) i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); break; case SEN_OV7620: -/* i2c_w(sd, 0x2b, 0x00); */ + case SEN_OV76BE: i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); i2c_w(sd, 0x25, qvga ? 0x30 : 0x60); i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40); - i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0); + i2c_w_mask(sd, 0x67, qvga ? 0xb0 : 0x90, 0xf0); i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20); break; - case SEN_OV76BE: -/* i2c_w(sd, 0x2b, 0x00); */ - i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); - break; case SEN_OV7640: -/* i2c_w(sd, 0x2b, 0x00); */ i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20); i2c_w_mask(sd, 0x28, qvga ? 0x00 : 0x20, 0x20); /* i2c_w(sd, 0x24, qvga ? 0x20 : 0x3a); */ -- GitLab