ath10k: add support for pktlog in QCA99X0

This patch adds pktlog support for 10.4 fw versions.
Signed-off-by: NVivek Natarajan <nataraja@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/htt.h

@@ -1598,5 +1598,7 @@ int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt, struct sk_buff *skb);
 void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id);
 int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *);
 int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *);
+void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
+					     struct sk_buff *skb);
 
 #endif

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -2127,6 +2127,18 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 }
 EXPORT_SYMBOL(ath10k_htt_t2h_msg_handler);
 
+void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
+					     struct sk_buff *skb)
+{
+	struct ath10k_pktlog_10_4_hdr *hdr =
+		(struct ath10k_pktlog_10_4_hdr *)skb->data;
+
+	trace_ath10k_htt_pktlog(ar, hdr->payload,
+				sizeof(*hdr) + __le16_to_cpu(hdr->size));
+	dev_kfree_skb_any(skb);
+}
+EXPORT_SYMBOL(ath10k_htt_rx_pktlog_completion_handler);
+
 static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 {
 	struct ath10k_htt *htt = (struct ath10k_htt *)ptr;

drivers/net/wireless/ath/ath10k/hw.h

@@ -273,6 +273,16 @@ struct ath10k_pktlog_hdr {
 	u8 payload[0];
 } __packed;
 
+struct ath10k_pktlog_10_4_hdr {
+	__le16 flags;
+	__le16 missed_cnt;
+	__le16 log_type;
+	__le16 size;
+	__le32 timestamp;
+	__le32 type_specific_data;
+	u8 payload[0];
+} __packed;
+
 enum ath10k_hw_rate_ofdm {
 	ATH10K_HW_RATE_OFDM_48M = 0,
 	ATH10K_HW_RATE_OFDM_24M,

drivers/net/wireless/ath/ath10k/pci.c

@@ -111,6 +111,7 @@ static void ath10k_pci_htc_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state);
 static void ath10k_pci_htt_rx_cb(struct ath10k_ce_pipe *ce_state);
+static void ath10k_pci_pktlog_rx_cb(struct ath10k_ce_pipe *ce_state);
 
 static const struct ce_attr host_ce_config_wlan[] = {
 	/* CE0: host->target HTC control and raw streams */
@@ -189,6 +190,7 @@ static const struct ce_attr host_ce_config_wlan[] = {
 		.src_nentries = 0,
 		.src_sz_max = 2048,
 		.dest_nentries = 128,
+		.recv_cb = ath10k_pci_pktlog_rx_cb,
 	},
 
 	/* CE9 target autonomous qcache memcpy */
@@ -1208,6 +1210,15 @@ static void ath10k_pci_htc_rx_cb(struct ath10k_ce_pipe *ce_state)
 	ath10k_pci_process_rx_cb(ce_state, ath10k_htc_rx_completion_handler);
 }
 
+/* Called by lower (CE) layer when data is received from the Target.
+ * Only 10.4 firmware uses separate CE to transfer pktlog data.
+ */
+static void ath10k_pci_pktlog_rx_cb(struct ath10k_ce_pipe *ce_state)
+{
+	ath10k_pci_process_rx_cb(ce_state,
+				 ath10k_htt_rx_pktlog_completion_handler);
+}
+
 /* Called by lower (CE) layer when a send to HTT Target completes. */
 static void ath10k_pci_htt_tx_cb(struct ath10k_ce_pipe *ce_state)
 {