From af29897f1046d7c1ab86b57506fbfdcfba569de8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 16 Jun 2016 11:36:14 +0200 Subject: [PATCH] video: ARM CLCD: support DT signal inversion flags The device tree bindings from display-timing.txt allows us to specify if data enable, hsync, vsync or the pixed clock should be inverted on the way to the display. The driver does not currently handle this so add support for those flags as it is needed for the Versatile Sanyo LCD display. Note that the previous behaviour was to invert the pixel clock for all displays, so unless the pixel clock polarity is explicitly defined in the device tree (i.e. the timings node has the "pixelclk-active" property) we fall back to inverting the pixel clock. This needs some extra compatibility code. Since the timing flags have to be set up inside the struct clcd_panel, we need to refactor the code a bit to pass around the panel rather than just the mode. Cc: Pawel Moll Cc: Rob Herring Cc: Russell King Signed-off-by: Linus Walleij Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/amba-clcd.c | 37 ++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index 52a33d3926ac..5bd20e8800bc 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -565,7 +565,7 @@ static int clcdfb_register(struct clcd_fb *fb) #ifdef CONFIG_OF static int clcdfb_of_get_dpi_panel_mode(struct device_node *node, - struct fb_videomode *mode) + struct clcd_panel *clcd_panel) { int err; struct display_timing timing; @@ -577,10 +577,31 @@ static int clcdfb_of_get_dpi_panel_mode(struct device_node *node, videomode_from_timing(&timing, &video); - err = fb_videomode_from_videomode(&video, mode); + err = fb_videomode_from_videomode(&video, &clcd_panel->mode); if (err) return err; + /* Set up some inversion flags */ + if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) + clcd_panel->tim2 |= TIM2_IPC; + else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)) + /* + * To preserve backwards compatibility, the IPC (inverted + * pixel clock) flag needs to be set on any display that + * doesn't explicitly specify that the pixel clock is + * active on the negative or positive edge. + */ + clcd_panel->tim2 |= TIM2_IPC; + + if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW) + clcd_panel->tim2 |= TIM2_IHS; + + if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW) + clcd_panel->tim2 |= TIM2_IVS; + + if (timing.flags & DISPLAY_FLAGS_DE_LOW) + clcd_panel->tim2 |= TIM2_IOE; + return 0; } @@ -613,10 +634,11 @@ static int clcdfb_of_get_backlight(struct device_node *endpoint, } static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint, - struct fb_videomode *mode) + struct clcd_panel *clcd_panel) { int err; struct device_node *panel; + struct fb_videomode *mode; char *name; int len; @@ -626,11 +648,12 @@ static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint, /* Only directly connected DPI panels supported for now */ if (of_device_is_compatible(panel, "panel-dpi")) - err = clcdfb_of_get_dpi_panel_mode(panel, mode); + err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel); else err = -ENOENT; if (err) return err; + mode = &clcd_panel->mode; len = clcdfb_snprintf_mode(NULL, 0, mode); name = devm_kzalloc(dev, len + 1, GFP_KERNEL); @@ -661,8 +684,8 @@ static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0) }; int i; - /* Bypass pixel clock divider, data output on the falling edge */ - fb->panel->tim2 = TIM2_BCD | TIM2_IPC; + /* Bypass pixel clock divider */ + fb->panel->tim2 |= TIM2_BCD; /* TFT display, vert. comp. interrupt at the start of the back porch */ fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1); @@ -702,7 +725,7 @@ static int clcdfb_of_init_display(struct clcd_fb *fb) if (err) return err; - err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, &fb->panel->mode); + err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, fb->panel); if (err) return err; -- GitLab