diff --git a/Documentation/video4linux/zr36120.txt b/Documentation/video4linux/zr36120.txt deleted file mode 100644 index 1a1c2d03a5c81fd6876ddb1d635068fa9feb21c5..0000000000000000000000000000000000000000 --- a/Documentation/video4linux/zr36120.txt +++ /dev/null @@ -1,162 +0,0 @@ -Driver for Trust Computer Products Framegrabber, version 0.6.1 ------- --- ----- -------- -------- ------------ ------- - - - - -- ZORAN ------------------------------------------------------ - Author: Pauline Middelink - Date: 18 September 1999 -Version: 0.6.1 - -- Description ------------------------------------------------ - -Video4Linux compatible driver for an unknown brand framegrabber -(Sold in the Netherlands by TRUST Computer Products) and various -other zoran zr36120 based framegrabbers. - -The card contains a ZR36120 Multimedia PCI Interface and a Philips -SAA7110 Onechip Frontend videodecoder. There is also an DSP of -which I have forgotten the number, since i will never get that thing -to work without specs from the vendor itself. - -The SAA711x are capable of processing 6 different video inputs, -CVBS1..6 and Y1+C1, Y2+C2, Y3+C3. All in 50/60Hz, NTSC, PAL or -SECAM and delivering a YUV datastream. On my card the input -'CVBS-0' corresponds to channel CVBS2 and 'S-Video' to Y2+C2. - -I have some reports of other cards working with the mentioned -chip sets. For a list of other working cards please have a look -at the cards named in the tvcards struct in the beginning of -zr36120.c - -After some testing, I discovered that the carddesigner messed up -on the I2C interface. The Zoran chip includes 2 lines SDA and SCL -which (s)he connected reversely. So we have to clock on the SDA -and r/w data on the SCL pin. Life is fun... Each cardtype now has -a bit which signifies if you have a card with the same deficiency. - -Oh, for the completeness of this story I must mention that my -card delivers the VSYNC pulse of the SAA chip to GIRQ1, not -GIRQ0 as some other cards have. This is also incorporated in -the driver be clearing/setting the 'useirq1' bit in the tvcard -description. - -Another problems of continuous capturing data with a Zoran chip -is something nasty inside the chip. It effectively halves the -fps we ought to get... Here is the scenario: capturing frames -to memory is done in the so-called snapshot mode. In this mode -the Zoran stops after capturing a frame worth of data and wait -till the application set GRAB bit to indicate readiness for the -next frame. After detecting a set bit, the chip neatly waits -till the start of a frame, captures it and it goes back to off. -Smart ppl will notice the problem here. Its the waiting on the -_next_ frame each time we set the GRAB bit... Oh well, 12,5 fps -is still plenty fast for me. --- update 28/7/1999 -- -Don't believe a word I just said... Proof is the output -of `streamer -t 300 -r 25 -f avi15 -o /dev/null` - ++--+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- 25/25 - +-s+-+-+-+-+-+-+-+-+-+-+-+-+-s+-+-+-+-+-+-+-+-+-+-+- - syncer: done - writer: done -(note the /dev/null is prudent here, my system is not able to - grab /and/ write 25 fps to a file... gifts welcome :) ) -The technical reasoning follows: The zoran completed the last -frame, the VSYNC goes low, and GRAB is cleared. The interrupt -routine starts to work since its VSYNC driven, and again -activates the GRAB bit. A few ms later the VSYNC (re-)rises and -the zoran starts to work on a new and freshly broadcasted frame.... - -For pointers I used the specs of both chips. Below are the URLs: - http://www.zoran.com/ftp/download/devices/pci/ZR36120/36120data.pdf - http://www-us.semiconductor.philips.com/acrobat/datasheets/SAA_7110_A_1.pdf -Some alternatives for the Philips SAA 7110 datasheet are: - http://www.datasheetcatalog.com/datasheets_pdf/S/A/A/7/SAA7110.shtml - http://www.datasheetarchive.com/search.php?search=SAA7110&sType=part - -The documentation has very little on absolute numbers or timings -needed for the various modes/resolutions, but there are other -programs you can borrow those from. - ------- Install -------------------------------------------- -Read the file called TODO. Note its long list of limitations. - -Build a kernel with VIDEO4LINUX enabled. Activate the -BT848 driver; we need this because we have need for the -other modules (i2c and videodev) it enables. - -To install this software, extract it into a suitable directory. -Examine the makefile and change anything you don't like. Type "make". - -After making the modules check if you have the much needed -/dev/video devices. If not, execute the following 4 lines: - mknod /dev/video c 81 0 - mknod /dev/video1 c 81 1 - mknod /dev/video2 c 81 2 - mknod /dev/video3 c 81 3 - mknod /dev/video4 c 81 4 - -After making/checking the devices do: - modprobe i2c - modprobe videodev - modprobe saa7110 (optional) - modprobe saa7111 (optional) - modprobe tuner (optional) - insmod zoran cardtype= - - is the cardtype of the card you have. The cardnumber can -be found in the source of zr36120. Look for tvcards. If your -card is not there, please try if any other card gives some -response, and mail me if you got a working tvcard addition. - -PS. for more information. - - To compile this driver as a module, choose M here: the - module will be called zr36120. - config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" depends on PCI && SONYPI && VIDEO_V4L1 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 2adb56d01ef69388c4d55477608dd6a340742685..20b9cbc144b913cfb9d353eb1c1c9d006336a81f 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -2,7 +2,6 @@ # Makefile for the video capture/playback device drivers. # -zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o zr36067-objs := zoran_procfs.o zoran_device.o \ zoran_driver.o zoran_card.o tuner-objs := tuner-core.o tuner-types.o tuner-simple.o \ @@ -23,7 +22,6 @@ obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o -obj-$(CONFIG_VIDEO_ZR36120) += zoran.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA5246A) += saa5246a.o obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o diff --git a/drivers/media/video/zr36120.c b/drivers/media/video/zr36120.c deleted file mode 100644 index 0cbf564388a6eb3583210a71413d1ed6592d04a6..0000000000000000000000000000000000000000 --- a/drivers/media/video/zr36120.c +++ /dev/null @@ -1,2079 +0,0 @@ -/* - zr36120.c - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "tuner.h" -#include "zr36120.h" -#include "zr36120_mem.h" - -/* mark an required function argument unused - lintism */ -#define UNUSED(x) (void)(x) - -/* sensible default */ -#ifndef CARDTYPE -#define CARDTYPE 0 -#endif - -/* Anybody who uses more than four? */ -#define ZORAN_MAX 4 - -static unsigned int triton1=0; /* triton1 chipset? */ -static unsigned int cardtype[ZORAN_MAX]={ [ 0 ... ZORAN_MAX-1 ] = CARDTYPE }; -static int video_nr = -1; -static int vbi_nr = -1; - -static struct pci_device_id zr36120_pci_tbl[] = { - { PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { 0 } -}; -MODULE_DEVICE_TABLE(pci, zr36120_pci_tbl); - -MODULE_AUTHOR("Pauline Middelink "); -MODULE_DESCRIPTION("Zoran ZR36120 based framegrabber"); -MODULE_LICENSE("GPL"); - -module_param(triton1, uint, 0); -module_param_array(cardtype, uint, NULL, 0); -module_param(video_nr, int, 0); -module_param(vbi_nr, int, 0); - -static int zoran_cards; -static struct zoran zorans[ZORAN_MAX]; - -/* - * the meaning of each element can be found in zr36120.h - * Determining the value of gpdir/gpval can be tricky. The - * best way is to run the card under the original software - * and read the values from the general purpose registers - * 0x28 and 0x2C. How you do that is left as an exercise - * to the impatient reader :) - */ -#define T 1 /* to separate the bools from the ints */ -#define F 0 -static struct tvcard tvcards[] = { - /* reported working by */ -/*0*/ { "Trust Victor II", - 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } }, - /* reported working by */ -/*1*/ { "Aitech WaveWatcher TV-PCI", - 3, 0, T, F, T, T, 0x7F, 0x80, { 1, TUNER(3), SVHS(6) }, { 0 } }, - /* reported working by ? */ -/*2*/ { "Genius Video Wonder PCI Video Capture Card", - 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } }, - /* reported working by */ -/*3*/ { "Guillemot Maxi-TV PCI", - 2, 0, T, T, T, T, 0x7F, 0x80, { 1, SVHS(6) }, { 0 } }, - /* reported working by "Craig Whitmore */ -/*4*/ { "Quadrant Buster", - 3, 3, T, F, T, T, 0x7F, 0x80, { SVHS(1), TUNER(2), 3 }, { 1, 2, 3 } }, - /* a debug entry which has all inputs mapped */ -/*5*/ { "ZR36120 based framegrabber (all inputs enabled)", - 6, 0, T, T, T, T, 0x7F, 0x80, { 1, 2, 3, 4, 5, 6 }, { 0 } } -}; -#undef T -#undef F -#define NRTVCARDS (sizeof(tvcards)/sizeof(tvcards[0])) - -#ifdef __sparc__ -#define ENDIANESS 0 -#else -#define ENDIANESS ZORAN_VFEC_LE -#endif - -static struct { const char name[8]; uint mode; uint bpp; } palette2fmt[] = { -/* n/a */ { "n/a", 0, 0 }, -/* GREY */ { "GRAY", 0, 0 }, -/* HI240 */ { "HI240", 0, 0 }, -/* RGB565 */ { "RGB565", ZORAN_VFEC_RGB_RGB565|ENDIANESS, 2 }, -/* RGB24 */ { "RGB24", ZORAN_VFEC_RGB_RGB888|ENDIANESS|ZORAN_VFEC_PACK24, 3 }, -/* RGB32 */ { "RGB32", ZORAN_VFEC_RGB_RGB888|ENDIANESS, 4 }, -/* RGB555 */ { "RGB555", ZORAN_VFEC_RGB_RGB555|ENDIANESS, 2 }, -/* YUV422 */ { "YUV422", ZORAN_VFEC_RGB_YUV422|ENDIANESS, 2 }, -/* YUYV */ { "YUYV", 0, 0 }, -/* UYVY */ { "UYVY", 0, 0 }, -/* YUV420 */ { "YUV420", 0, 0 }, -/* YUV411 */ { "YUV411", 0, 0 }, -/* RAW */ { "RAW", 0, 0 }, -/* YUV422P */ { "YUV422P", 0, 0 }, -/* YUV411P */ { "YUV411P", 0, 0 }}; -#define NRPALETTES (sizeof(palette2fmt)/sizeof(palette2fmt[0])) -#undef ENDIANESS - -/* ----------------------------------------------------------------------- */ -/* ZORAN chipset detector */ -/* shamelessly stolen from bttv.c */ -/* Reason for beeing here: we need to detect if we are running on a */ -/* Triton based chipset, and if so, enable a certain bit */ -/* ----------------------------------------------------------------------- */ -static -void __init handle_chipset(void) -{ - /* Just in case some nut set this to something dangerous */ - if (triton1) - triton1 = ZORAN_VDC_TRICOM; - - if (pci_pci_problems & PCIPCI_TRITON) { - printk(KERN_INFO "zoran: Host bridge 82437FX Triton PIIX\n"); - triton1 = ZORAN_VDC_TRICOM; - } -} - -/* ----------------------------------------------------------------------- */ -/* ZORAN functions */ -/* ----------------------------------------------------------------------- */ - -static void zoran_set_geo(struct zoran* ztv, struct vidinfo* i); - -#if 0 /* unused */ -static -void zoran_dump(struct zoran *ztv) -{ - char str[256]; - char *p=str; /* shut up, gcc! */ - int i; - - for (i=0; i<0x60; i+=4) { - if ((i % 16) == 0) { - if (i) printk("%s\n",str); - p = str; - p+= sprintf(str, KERN_DEBUG " %04x: ",i); - } - p += sprintf(p, "%08x ",zrread(i)); - } -} -#endif /* unused */ - -static -void reap_states(struct zoran* ztv) -{ - /* count frames */ - ztv->fieldnr++; - - /* - * Are we busy at all? - * This depends on if there is a workqueue AND the - * videotransfer is enabled on the chip... - */ - if (ztv->workqueue && (zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN)) - { - struct vidinfo* newitem; - - /* did we get a complete frame? */ - if (zrread(ZORAN_VSTR) & ZORAN_VSTR_GRAB) - return; - -DEBUG(printk(CARD_DEBUG "completed %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue)); - - /* we are done with this buffer, tell everyone */ - ztv->workqueue->status = FBUFFER_DONE; - ztv->workqueue->fieldnr = ztv->fieldnr; - /* not good, here for BTTV_FIELDNR reasons */ - ztv->lastfieldnr = ztv->fieldnr; - - switch (ztv->workqueue->kindof) { - case FBUFFER_GRAB: - wake_up_interruptible(&ztv->grabq); - break; - case FBUFFER_VBI: - wake_up_interruptible(&ztv->vbiq); - break; - default: - printk(CARD_INFO "somebody killed the workqueue (kindof=%d)!\n",CARD,ztv->workqueue->kindof); - } - - /* item completed, skip to next item in queue */ - write_lock(&ztv->lock); - newitem = ztv->workqueue->next; - ztv->workqueue->next = 0; /* mark completed */ - ztv->workqueue = newitem; - write_unlock(&ztv->lock); - } - - /* - * ok, so it seems we have nothing in progress right now. - * Lets see if we can find some work. - */ - if (ztv->workqueue) - { - struct vidinfo* newitem; -again: - -DEBUG(printk(CARD_DEBUG "starting %s at %p\n",CARD,ztv->workqueue->kindof==FBUFFER_GRAB?"grab":"read",ztv->workqueue)); - - /* loadup the frame settings */ - read_lock(&ztv->lock); - zoran_set_geo(ztv,ztv->workqueue); - read_unlock(&ztv->lock); - - switch (ztv->workqueue->kindof) { - case FBUFFER_GRAB: - case FBUFFER_VBI: - zrand(~ZORAN_OCR_OVLEN, ZORAN_OCR); - zror(ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR); - zror(ZORAN_VDC_VIDEN,ZORAN_VDC); - - /* start single-shot grab */ - zror(ZORAN_VSTR_GRAB, ZORAN_VSTR); - break; - default: - printk(CARD_INFO "what is this doing on the queue? (kindof=%d)\n",CARD,ztv->workqueue->kindof); - write_lock(&ztv->lock); - newitem = ztv->workqueue->next; - ztv->workqueue->next = 0; - ztv->workqueue = newitem; - write_unlock(&ztv->lock); - if (newitem) - goto again; /* yeah, sure.. */ - } - /* bye for now */ - return; - } -DEBUG(printk(CARD_DEBUG "nothing in queue\n",CARD)); - - /* - * What? Even the workqueue is empty? Am i really here - * for nothing? Did i come all that way to... do nothing? - */ - - /* do we need to overlay? */ - if (test_bit(STATE_OVERLAY, &ztv->state)) - { - /* are we already overlaying? */ - if (!(zrread(ZORAN_OCR) & ZORAN_OCR_OVLEN) || - !(zrread(ZORAN_VDC) & ZORAN_VDC_VIDEN)) - { -DEBUG(printk(CARD_DEBUG "starting overlay\n",CARD)); - - read_lock(&ztv->lock); - zoran_set_geo(ztv,&ztv->overinfo); - read_unlock(&ztv->lock); - - zror(ZORAN_OCR_OVLEN, ZORAN_OCR); - zrand(~ZORAN_VSTR_SNAPSHOT,ZORAN_VSTR); - zror(ZORAN_VDC_VIDEN,ZORAN_VDC); - } - - /* - * leave overlaying on, but turn interrupts off. - */ - zrand(~ZORAN_ICR_EN,ZORAN_ICR); - return; - } - - /* do we have any VBI idle time processing? */ - if (test_bit(STATE_VBI, &ztv->state)) - { - struct vidinfo* item; - struct vidinfo* lastitem; - - /* protect the workqueue */ - write_lock(&ztv->lock); - lastitem = ztv->workqueue; - if (lastitem) - while (lastitem->next) lastitem = lastitem->next; - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - if (item->next == 0 && item->status == FBUFFER_FREE) - { -DEBUG(printk(CARD_DEBUG "%p added to queue\n",CARD,item)); - item->status = FBUFFER_BUSY; - if (!lastitem) - ztv->workqueue = item; - else - lastitem->next = item; - lastitem = item; - } - write_unlock(&ztv->lock); - if (ztv->workqueue) - goto again; /* hey, _i_ graduated :) */ - } - - /* - * Then we must be realy IDLE - */ -DEBUG(printk(CARD_DEBUG "turning off\n",CARD)); - /* nothing further to do, disable DMA and further IRQs */ - zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC); - zrand(~ZORAN_ICR_EN,ZORAN_ICR); -} - -static -void zoran_irq(int irq, void *dev_id) -{ - u32 stat,estat; - int count = 0; - struct zoran *ztv = dev_id; - - UNUSED(irq); - for (;;) { - /* get/clear interrupt status bits */ - stat=zrread(ZORAN_ISR); - estat=stat & zrread(ZORAN_ICR); - if (!estat) - return; - zrwrite(estat,ZORAN_ISR); - IDEBUG(printk(CARD_DEBUG "estat %08x\n",CARD,estat)); - IDEBUG(printk(CARD_DEBUG " stat %08x\n",CARD,stat)); - - if (estat & ZORAN_ISR_CODE) - { - IDEBUG(printk(CARD_DEBUG "CodReplIRQ\n",CARD)); - } - if (estat & ZORAN_ISR_GIRQ0) - { - IDEBUG(printk(CARD_DEBUG "GIRQ0\n",CARD)); - if (!ztv->card->usegirq1) - reap_states(ztv); - } - if (estat & ZORAN_ISR_GIRQ1) - { - IDEBUG(printk(CARD_DEBUG "GIRQ1\n",CARD)); - if (ztv->card->usegirq1) - reap_states(ztv); - } - - count++; - if (count > 10) - printk(CARD_ERR "irq loop %d (%x)\n",CARD,count,estat); - if (count > 20) - { - zrwrite(0, ZORAN_ICR); - printk(CARD_ERR "IRQ lockup, cleared int mask\n",CARD); - } - } -} - -static -int zoran_muxsel(struct zoran* ztv, int channel, int norm) -{ - int rv; - - /* set the new video norm */ - rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_NORM, &norm); - if (rv) - return rv; - ztv->norm = norm; - - /* map the given channel to the cards decoder's channel */ - channel = ztv->card->video_mux[channel] & CHANNEL_MASK; - - /* set the new channel */ - rv = i2c_control_device(&(ztv->i2c), I2C_DRIVERID_VIDEODECODER, DECODER_SET_INPUT, &channel); - return rv; -} - -/* Tell the interrupt handler what to to. */ -static -void zoran_cap(struct zoran* ztv, int on) -{ -DEBUG(printk(CARD_DEBUG "zoran_cap(%d) state=%x\n",CARD,on,ztv->state)); - - if (on) { - ztv->running = 1; - - /* - * turn interrupts (back) on. The DMA will be enabled - * inside the irq handler when it detects a restart. - */ - zror(ZORAN_ICR_EN,ZORAN_ICR); - } - else { - /* - * turn both interrupts and DMA off - */ - zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC); - zrand(~ZORAN_ICR_EN,ZORAN_ICR); - - ztv->running = 0; - } -} - -static ulong dmask[] = { - 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFC, 0xFFFFFFF8, - 0xFFFFFFF0, 0xFFFFFFE0, 0xFFFFFFC0, 0xFFFFFF80, - 0xFFFFFF00, 0xFFFFFE00, 0xFFFFFC00, 0xFFFFF800, - 0xFFFFF000, 0xFFFFE000, 0xFFFFC000, 0xFFFF8000, - 0xFFFF0000, 0xFFFE0000, 0xFFFC0000, 0xFFF80000, - 0xFFF00000, 0xFFE00000, 0xFFC00000, 0xFF800000, - 0xFF000000, 0xFE000000, 0xFC000000, 0xF8000000, - 0xF0000000, 0xE0000000, 0xC0000000, 0x80000000 -}; - -static -void zoran_built_overlay(struct zoran* ztv, int count, struct video_clip *vcp) -{ - ulong* mtop; - int ystep = (ztv->vidXshift + ztv->vidWidth+31)/32; /* next DWORD */ - int i; - -DEBUG(printk(KERN_DEBUG " overlay at %p, ystep=%d, clips=%d\n",ztv->overinfo.overlay,ystep,count)); - - for (i=0; ix,vp->y,vp->width,vp->height)); - } - - /* - * activate the visible portion of the screen - * Note we take some shortcuts here, because we - * know the width can never be < 32. (I.e. a DWORD) - * We also assume the overlay starts somewhere in - * the FIRST dword. - */ - { - int start = ztv->vidXshift; - ulong firstd = dmask[start]; - ulong lastd = ~dmask[(start + ztv->overinfo.w) & 31]; - mtop = ztv->overinfo.overlay; - for (i=0; ioverinfo.h; i++) { - int w = ztv->vidWidth; - ulong* line = mtop; - if (start & 31) { - *line++ = firstd; - w -= 32-(start&31); - } - memset(line, ~0, w/8); - if (w & 31) - line[w/32] = lastd; - mtop += ystep; - } - } - - /* process clipping regions */ - for (i=0; ix < 0 || (uint)vcp->x > ztv->overinfo.w || - vcp->y < 0 || vcp->y > ztv->overinfo.h || - vcp->width < 0 || (uint)(vcp->x+vcp->width) > ztv->overinfo.w || - vcp->height < 0 || (vcp->y+vcp->height) > ztv->overinfo.h) - { - DEBUG(printk(CARD_DEBUG "invalid clipzone (%d,%d,%d,%d) not in (0,0,%d,%d), adapting\n",CARD,vcp->x,vcp->y,vcp->width,vcp->height,ztv->overinfo.w,ztv->overinfo.h)); - if (vcp->x < 0) vcp->x = 0; - if ((uint)vcp->x > ztv->overinfo.w) vcp->x = ztv->overinfo.w; - if (vcp->y < 0) vcp->y = 0; - if (vcp->y > ztv->overinfo.h) vcp->y = ztv->overinfo.h; - if (vcp->width < 0) vcp->width = 0; - if ((uint)(vcp->x+vcp->width) > ztv->overinfo.w) vcp->width = ztv->overinfo.w - vcp->x; - if (vcp->height < 0) vcp->height = 0; - if (vcp->y+vcp->height > ztv->overinfo.h) vcp->height = ztv->overinfo.h - vcp->y; -// continue; - } - - mtop = &ztv->overinfo.overlay[vcp->y*ystep]; - for (h=0; h<=vcp->height; h++) { - int w; - int x = ztv->vidXshift + vcp->x; - for (w=0; w<=vcp->width; w++) { - clear_bit(x&31, &mtop[x/32]); - x++; - } - mtop += ystep; - } - ++vcp; - } - - mtop = ztv->overinfo.overlay; - zrwrite(virt_to_bus(mtop), ZORAN_MTOP); - zrwrite(virt_to_bus(mtop+ystep), ZORAN_MBOT); - zraor((ztv->vidInterlace*ystep)<<0,~ZORAN_OCR_MASKSTRIDE,ZORAN_OCR); -} - -struct tvnorm -{ - u16 Wt, Wa, Ht, Ha, HStart, VStart; -}; - -static struct tvnorm tvnorms[] = { - /* PAL-BDGHI */ -/* { 864, 720, 625, 576, 131, 21 },*/ -/*00*/ { 864, 768, 625, 576, 81, 17 }, - /* NTSC */ -/*01*/ { 858, 720, 525, 480, 121, 10 }, - /* SECAM */ -/*02*/ { 864, 720, 625, 576, 131, 21 }, - /* BW50 */ -/*03*/ { 864, 720, 625, 576, 131, 21 }, - /* BW60 */ -/*04*/ { 858, 720, 525, 480, 121, 10 } -}; -#define TVNORMS (sizeof(tvnorms)/sizeof(tvnorm)) - -/* - * Program the chip for a setup as described in the vidinfo struct. - * - * Side-effects: calculates vidXshift, vidInterlace, - * vidHeight, vidWidth which are used in a later stage - * to calculate the overlay mask - * - * This is an internal function, as such it does not check the - * validity of the struct members... Spectaculair crashes will - * follow /very/ quick when you're wrong and the chip right :) - */ -static -void zoran_set_geo(struct zoran* ztv, struct vidinfo* i) -{ - ulong top, bot; - int stride; - int winWidth, winHeight; - int maxWidth, maxHeight, maxXOffset, maxYOffset; - long vfec; - -DEBUG(printk(CARD_DEBUG "set_geo(rect=(%d,%d,%d,%d), norm=%d, format=%d, bpp=%d, bpl=%d, busadr=%lx, overlay=%p)\n",CARD,i->x,i->y,i->w,i->h,ztv->norm,i->format,i->bpp,i->bpl,i->busadr,i->overlay)); - - /* - * make sure the DMA transfers are inhibited during our - * reprogramming of the chip - */ - zrand(~ZORAN_VDC_VIDEN,ZORAN_VDC); - - maxWidth = tvnorms[ztv->norm].Wa; - maxHeight = tvnorms[ztv->norm].Ha/2; - maxXOffset = tvnorms[ztv->norm].HStart; - maxYOffset = tvnorms[ztv->norm].VStart; - - /* setup vfec register (keep ExtFl,TopField and VCLKPol settings) */ - vfec = (zrread(ZORAN_VFEC) & (ZORAN_VFEC_EXTFL|ZORAN_VFEC_TOPFIELD|ZORAN_VFEC_VCLKPOL)) | - (palette2fmt[i->format].mode & (ZORAN_VFEC_RGB|ZORAN_VFEC_ERRDIF|ZORAN_VFEC_LE|ZORAN_VFEC_PACK24)); - - /* - * Set top, bottom ptrs. Since these must be DWORD aligned, - * possible adjust the x and the width of the window. - * so the endposition stay the same. The vidXshift will make - * sure we are not writing pixels before the requested x. - */ - ztv->vidXshift = 0; - winWidth = i->w; - if (winWidth < 0) - winWidth = -winWidth; - top = i->busadr + i->x*i->bpp + i->y*i->bpl; - if (top & 3) { - ztv->vidXshift = (top & 3) / i->bpp; - winWidth += ztv->vidXshift; - DEBUG(printk(KERN_DEBUG " window-x shifted %d pixels left\n",ztv->vidXshift)); - top &= ~3; - } - - /* - * bottom points to next frame but in interleaved mode we want - * to 'mix' the 2 frames to one capture, so 'bot' points to one - * (physical) line below the top line. - */ - bot = top + i->bpl; - zrwrite(top,ZORAN_VTOP); - zrwrite(bot,ZORAN_VBOT); - - /* - * Make sure the winWidth is DWORD aligned too, - * thereby automaticly making sure the stride to the - * next line is DWORD aligned too (as required by spec). - */ - if ((winWidth*i->bpp) & 3) { -DEBUG(printk(KERN_DEBUG " window-width enlarged by %d pixels\n",(winWidth*i->bpp) & 3)); - winWidth += (winWidth*i->bpp) & 3; - } - - /* determine the DispMode and stride */ - if (i->h >= 0 && i->h <= maxHeight) { - /* single frame grab suffices for this height. */ - vfec |= ZORAN_VFEC_DISPMOD; - ztv->vidInterlace = 0; - stride = i->bpl - (winWidth*i->bpp); - winHeight = i->h; - } - else { - /* interleaving needed for this height */ - ztv->vidInterlace = 1; - stride = i->bpl*2 - (winWidth*i->bpp); - winHeight = i->h/2; - } - if (winHeight < 0) /* can happen for VBI! */ - winHeight = -winHeight; - - /* safety net, sometimes bpl is too short??? */ - if (stride<0) { -DEBUG(printk(CARD_DEBUG "WARNING stride = %d\n",CARD,stride)); - stride = 0; - } - - zraor((winHeight<<12)|(winWidth<<0),~(ZORAN_VDC_VIDWINHT|ZORAN_VDC_VIDWINWID), ZORAN_VDC); - zraor(stride<<16,~ZORAN_VSTR_DISPSTRIDE,ZORAN_VSTR); - - /* remember vidWidth, vidHeight for overlay calculations */ - ztv->vidWidth = winWidth; - ztv->vidHeight = winHeight; -DEBUG(printk(KERN_DEBUG " top=%08lx, bottom=%08lx\n",top,bot)); -DEBUG(printk(KERN_DEBUG " winWidth=%d, winHeight=%d\n",winWidth,winHeight)); -DEBUG(printk(KERN_DEBUG " maxWidth=%d, maxHeight=%d\n",maxWidth,maxHeight)); -DEBUG(printk(KERN_DEBUG " stride=%d\n",stride)); - - /* - * determine horizontal scales and crops - */ - if (i->w < 0) { - int Hstart = 1; - int Hend = Hstart + winWidth; -DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Hstart, Hend)); - zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH); - } - else { - int Wa = maxWidth; - int X = (winWidth*64+Wa-1)/Wa; - int We = winWidth*64/X; - int HorDcm = 64-X; - int hcrop1 = 2*(Wa-We)/4; - /* - * BUGFIX: Juha Nurmela - * found the solution to the color phase shift. - * See ChangeLog for the full explanation) - */ - int Hstart = (maxXOffset + hcrop1) | 1; - int Hend = Hstart + We - 1; - -DEBUG(printk(KERN_DEBUG " X: scale=%d, start=%d, end=%d\n", HorDcm, Hstart, Hend)); - - zraor((Hstart<<10)|(Hend<<0),~(ZORAN_VFEH_HSTART|ZORAN_VFEH_HEND),ZORAN_VFEH); - vfec |= HorDcm<<14; - - if (HorDcm<16) - vfec |= ZORAN_VFEC_HFILTER_1; /* no filter */ - else if (HorDcm<32) - vfec |= ZORAN_VFEC_HFILTER_3; /* 3 tap filter */ - else if (HorDcm<48) - vfec |= ZORAN_VFEC_HFILTER_4; /* 4 tap filter */ - else vfec |= ZORAN_VFEC_HFILTER_5; /* 5 tap filter */ - } - - /* - * Determine vertical scales and crops - * - * when height is negative, we want to read starting at line 0 - * One day someone might need access to these lines... - */ - if (i->h < 0) { - int Vstart = 0; - int Vend = Vstart + winHeight; -DEBUG(printk(KERN_DEBUG " Y: scale=0, start=%d, end=%d\n", Vstart, Vend)); - zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV); - } - else { - int Ha = maxHeight; - int Y = (winHeight*64+Ha-1)/Ha; - int He = winHeight*64/Y; - int VerDcm = 64-Y; - int vcrop1 = 2*(Ha-He)/4; - int Vstart = maxYOffset + vcrop1; - int Vend = Vstart + He - 1; - -DEBUG(printk(KERN_DEBUG " Y: scale=%d, start=%d, end=%d\n", VerDcm, Vstart, Vend)); - zraor((Vstart<<10)|(Vend<<0),~(ZORAN_VFEV_VSTART|ZORAN_VFEV_VEND),ZORAN_VFEV); - vfec |= VerDcm<<8; - } - -DEBUG(printk(KERN_DEBUG " F: format=%d(=%s)\n",i->format,palette2fmt[i->format].name)); - - /* setup the requested format */ - zrwrite(vfec, ZORAN_VFEC); -} - -static -void zoran_common_open(struct zoran* ztv, int flags) -{ - UNUSED(flags); - - /* already opened? */ - if (ztv->users++ != 0) - return; - - /* unmute audio */ - /* /what/ audio? */ - - ztv->state = 0; - - /* setup the encoder to the initial values */ - ztv->picture.colour=254<<7; - ztv->picture.brightness=128<<8; - ztv->picture.hue=128<<8; - ztv->picture.contrast=216<<7; - i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &ztv->picture); - - /* default to the composite input since my camera is there */ - zoran_muxsel(ztv, 0, VIDEO_MODE_PAL); -} - -static -void zoran_common_close(struct zoran* ztv) -{ - if (--ztv->users != 0) - return; - - /* mute audio */ - /* /what/ audio? */ - - /* stop the chip */ - zoran_cap(ztv, 0); -} - -/* - * Open a zoran card. Right now the flags are just a hack - */ -static int zoran_open(struct video_device *dev, int flags) -{ - struct zoran *ztv = (struct zoran*)dev; - struct vidinfo* item; - char* pos; - - DEBUG(printk(CARD_DEBUG "open(dev,%d)\n",CARD,flags)); - - /********************************************* - * We really should be doing lazy allocing... - *********************************************/ - /* allocate a frame buffer */ - if (!ztv->fbuffer) - ztv->fbuffer = bmalloc(ZORAN_MAX_FBUFSIZE); - if (!ztv->fbuffer) { - /* could not get a buffer, bail out */ - return -ENOBUFS; - } - /* at this time we _always_ have a framebuffer */ - memset(ztv->fbuffer,0,ZORAN_MAX_FBUFSIZE); - - if (!ztv->overinfo.overlay) - ztv->overinfo.overlay = kmalloc(1024*1024/8, GFP_KERNEL); - if (!ztv->overinfo.overlay) { - /* could not get an overlay buffer, bail out */ - bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE); - return -ENOBUFS; - } - /* at this time we _always_ have a overlay */ - - /* clear buffer status, and give them a DMAable address */ - pos = ztv->fbuffer; - for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++) - { - item->status = FBUFFER_FREE; - item->memadr = pos; - item->busadr = virt_to_bus(pos); - pos += ZORAN_MAX_FBUFFER; - } - - /* do the common part of all open's */ - zoran_common_open(ztv, flags); - - return 0; -} - -static -void zoran_close(struct video_device* dev) -{ - struct zoran *ztv = (struct zoran*)dev; - - DEBUG(printk(CARD_DEBUG "close(dev)\n",CARD)); - - /* driver specific closure */ - clear_bit(STATE_OVERLAY, &ztv->state); - - zoran_common_close(ztv); - - /* - * This is sucky but right now I can't find a good way to - * be sure its safe to free the buffer. We wait 5-6 fields - * which is more than sufficient to be sure. - */ - msleep(100); /* Wait 1/10th of a second */ - - /* free the allocated framebuffer */ - bfree(ztv->fbuffer, ZORAN_MAX_FBUFSIZE); - ztv->fbuffer = 0; - kfree(ztv->overinfo.overlay); - ztv->overinfo.overlay = 0; - -} - -/* - * This read function could be used reentrant in a SMP situation. - * - * This is made possible by the spinlock which is kept till we - * found and marked a buffer for our own use. The lock must - * be released as soon as possible to prevent lock contention. - */ -static -long zoran_read(struct video_device* dev, char* buf, unsigned long count, int nonblock) -{ - struct zoran *ztv = (struct zoran*)dev; - unsigned long max; - struct vidinfo* unused = 0; - struct vidinfo* done = 0; - - DEBUG(printk(CARD_DEBUG "zoran_read(%p,%ld,%d)\n",CARD,buf,count,nonblock)); - - /* find ourself a free or completed buffer */ - for (;;) { - struct vidinfo* item; - - write_lock_irq(&ztv->lock); - for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++) - { - if (!unused && item->status == FBUFFER_FREE) - unused = item; - if (!done && item->status == FBUFFER_DONE) - done = item; - } - if (done || unused) - break; - - /* no more free buffers, wait for them. */ - write_unlock_irq(&ztv->lock); - if (nonblock) - return -EWOULDBLOCK; - interruptible_sleep_on(&ztv->grabq); - if (signal_pending(current)) - return -EINTR; - } - - /* Do we have 'ready' data? */ - if (!done) { - /* no? than this will take a while... */ - if (nonblock) { - write_unlock_irq(&ztv->lock); - return -EWOULDBLOCK; - } - - /* mark the unused buffer as wanted */ - unused->status = FBUFFER_BUSY; - unused->w = 320; - unused->h = 240; - unused->format = VIDEO_PALETTE_RGB24; - unused->bpp = palette2fmt[unused->format].bpp; - unused->bpl = unused->w * unused->bpp; - unused->next = 0; - { /* add to tail of queue */ - struct vidinfo* oldframe = ztv->workqueue; - if (!oldframe) ztv->workqueue = unused; - else { - while (oldframe->next) oldframe = oldframe->next; - oldframe->next = unused; - } - } - write_unlock_irq(&ztv->lock); - - /* tell the state machine we want it filled /NOW/ */ - zoran_cap(ztv, 1); - - /* wait till this buffer gets grabbed */ - wait_event_interruptible(ztv->grabq, - (unused->status != FBUFFER_BUSY)); - /* see if a signal did it */ - if (signal_pending(current)) - return -EINTR; - done = unused; - } - else - write_unlock_irq(&ztv->lock); - - /* Yes! we got data! */ - max = done->bpl * done->h; - if (count > max) - count = max; - if (copy_to_user((void*)buf, done->memadr, count)) - count = -EFAULT; - - /* keep the engine running */ - done->status = FBUFFER_FREE; -// zoran_cap(ztv,1); - - /* tell listeners this buffer became free */ - wake_up_interruptible(&ztv->grabq); - - /* goodbye */ - DEBUG(printk(CARD_DEBUG "zoran_read() returns %lu\n",CARD,count)); - return count; -} - -static -long zoran_write(struct video_device* dev, const char* buf, unsigned long count, int nonblock) -{ - struct zoran *ztv = (struct zoran *)dev; - UNUSED(ztv); UNUSED(dev); UNUSED(buf); UNUSED(count); UNUSED(nonblock); - DEBUG(printk(CARD_DEBUG "zoran_write\n",CARD)); - return -EINVAL; -} - -static -unsigned int zoran_poll(struct video_device *dev, struct file *file, poll_table *wait) -{ - struct zoran *ztv = (struct zoran *)dev; - struct vidinfo* item; - unsigned int mask = 0; - - poll_wait(file, &ztv->grabq, wait); - - for (item=ztv->grabinfo; item!=ztv->grabinfo+ZORAN_MAX_FBUFFERS; item++) - if (item->status == FBUFFER_DONE) - { - mask |= (POLLIN | POLLRDNORM); - break; - } - - DEBUG(printk(CARD_DEBUG "zoran_poll()=%x\n",CARD,mask)); - - return mask; -} - -/* append a new clipregion to the vector of video_clips */ -static -void new_clip(struct video_window* vw, struct video_clip* vcp, int x, int y, int w, int h) -{ - vcp[vw->clipcount].x = x; - vcp[vw->clipcount].y = y; - vcp[vw->clipcount].width = w; - vcp[vw->clipcount].height = h; - vw->clipcount++; -} - -static -int zoran_ioctl(struct video_device* dev, unsigned int cmd, void *arg) -{ - struct zoran* ztv = (struct zoran*)dev; - - switch (cmd) { - case VIDIOCGCAP: - { - struct video_capability c; - DEBUG(printk(CARD_DEBUG "VIDIOCGCAP\n",CARD)); - - strcpy(c.name,ztv->video_dev.name); - c.type = VID_TYPE_CAPTURE| - VID_TYPE_OVERLAY| - VID_TYPE_CLIPPING| - VID_TYPE_FRAMERAM| - VID_TYPE_SCALES; - if (ztv->have_tuner) - c.type |= VID_TYPE_TUNER; - if (pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) - c.type &= ~VID_TYPE_OVERLAY; - if (ztv->have_decoder) { - c.channels = ztv->card->video_inputs; - c.audios = ztv->card->audio_inputs; - } else - /* no decoder -> no channels */ - c.channels = c.audios = 0; - c.maxwidth = 768; - c.maxheight = 576; - c.minwidth = 32; - c.minheight = 32; - if (copy_to_user(arg,&c,sizeof(c))) - return -EFAULT; - break; - } - - case VIDIOCGCHAN: - { - struct video_channel v; - int mux; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCGCHAN(%d)\n",CARD,v.channel)); - v.flags=VIDEO_VC_AUDIO -#ifdef VIDEO_VC_NORM - |VIDEO_VC_NORM -#endif - ; - v.tuners=0; - v.type=VIDEO_TYPE_CAMERA; -#ifdef I_EXPECT_POSSIBLE_NORMS_IN_THE_API - v.norm=VIDEO_MODE_PAL| - VIDEO_MODE_NTSC| - VIDEO_MODE_SECAM; -#else - v.norm=VIDEO_MODE_PAL; -#endif - /* too many inputs? no decoder -> no channels */ - if (!ztv->have_decoder || v.channel < 0 || v.channel >= ztv->card->video_inputs) - return -EINVAL; - - /* now determine the name of the channel */ - mux = ztv->card->video_mux[v.channel]; - if (mux & IS_TUNER) { - /* lets assume only one tuner, yes? */ - strcpy(v.name,"Television"); - v.type = VIDEO_TYPE_TV; - if (ztv->have_tuner) { - v.flags |= VIDEO_VC_TUNER; - v.tuners = 1; - } - } - else if (mux & IS_SVHS) - sprintf(v.name,"S-Video-%d",v.channel); - else - sprintf(v.name,"CVBS-%d",v.channel); - - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - break; - } - case VIDIOCSCHAN: - { /* set video channel */ - struct video_channel v; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSCHAN(%d,%d)\n",CARD,v.channel,v.norm)); - - /* too many inputs? no decoder -> no channels */ - if (!ztv->have_decoder || v.channel >= ztv->card->video_inputs || v.channel < 0) - return -EINVAL; - - if (v.norm != VIDEO_MODE_PAL && - v.norm != VIDEO_MODE_NTSC && - v.norm != VIDEO_MODE_SECAM && - v.norm != VIDEO_MODE_AUTO) - return -EOPNOTSUPP; - - /* make it happen, nr1! */ - return zoran_muxsel(ztv,v.channel,v.norm); - } - - case VIDIOCGTUNER: - { - struct video_tuner v; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCGTUNER(%d)\n",CARD,v.tuner)); - - /* Only no or one tuner for now */ - if (!ztv->have_tuner || v.tuner) - return -EINVAL; - - strcpy(v.name,"Television"); - v.rangelow = 0; - v.rangehigh = ~0; - v.flags = VIDEO_TUNER_PAL|VIDEO_TUNER_NTSC|VIDEO_TUNER_SECAM; - v.mode = ztv->norm; - v.signal = 0xFFFF; /* unknown */ - - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - break; - } - case VIDIOCSTUNER: - { - struct video_tuner v; - if (copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSTUNER(%d,%d)\n",CARD,v.tuner,v.mode)); - - /* Only no or one tuner for now */ - if (!ztv->have_tuner || v.tuner) - return -EINVAL; - - /* and it only has certain valid modes */ - if( v.mode != VIDEO_MODE_PAL && - v.mode != VIDEO_MODE_NTSC && - v.mode != VIDEO_MODE_SECAM) - return -EOPNOTSUPP; - - /* engage! */ - return zoran_muxsel(ztv,v.tuner,v.mode); - } - - case VIDIOCGPICT: - { - struct video_picture p = ztv->picture; - DEBUG(printk(CARD_DEBUG "VIDIOCGPICT\n",CARD)); - p.depth = ztv->depth; - switch (p.depth) { - case 8: p.palette=VIDEO_PALETTE_YUV422; - break; - case 15: p.palette=VIDEO_PALETTE_RGB555; - break; - case 16: p.palette=VIDEO_PALETTE_RGB565; - break; - case 24: p.palette=VIDEO_PALETTE_RGB24; - break; - case 32: p.palette=VIDEO_PALETTE_RGB32; - break; - } - if (copy_to_user(arg, &p, sizeof(p))) - return -EFAULT; - break; - } - case VIDIOCSPICT: - { - struct video_picture p; - if (copy_from_user(&p, arg,sizeof(p))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSPICT(%d,%d,%d,%d,%d,%d,%d)\n",CARD,p.brightness,p.hue,p.colour,p.contrast,p.whiteness,p.depth,p.palette)); - - /* depth must match with framebuffer */ - if (p.depth != ztv->depth) - return -EINVAL; - - /* check if palette matches this bpp */ - if (p.palette>NRPALETTES || - palette2fmt[p.palette].bpp != ztv->overinfo.bpp) - return -EINVAL; - - write_lock_irq(&ztv->lock); - ztv->overinfo.format = p.palette; - ztv->picture = p; - write_unlock_irq(&ztv->lock); - - /* tell the decoder */ - i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_SET_PICTURE, &p); - break; - } - - case VIDIOCGWIN: - { - struct video_window vw; - DEBUG(printk(CARD_DEBUG "VIDIOCGWIN\n",CARD)); - read_lock(&ztv->lock); - vw.x = ztv->overinfo.x; - vw.y = ztv->overinfo.y; - vw.width = ztv->overinfo.w; - vw.height = ztv->overinfo.h; - vw.chromakey= 0; - vw.flags = 0; - if (ztv->vidInterlace) - vw.flags|=VIDEO_WINDOW_INTERLACE; - read_unlock(&ztv->lock); - if (copy_to_user(arg,&vw,sizeof(vw))) - return -EFAULT; - break; - } - case VIDIOCSWIN: - { - struct video_window vw; - struct video_clip *vcp; - int on; - if (copy_from_user(&vw,arg,sizeof(vw))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSWIN(%d,%d,%d,%d,%x,%d)\n",CARD,vw.x,vw.y,vw.width,vw.height,vw.flags,vw.clipcount)); - - if (vw.flags) - return -EINVAL; - - if (vw.clipcount <0 || vw.clipcount>256) - return -EDOM; /* Too many! */ - - /* - * Do any clips. - */ - vcp = vmalloc(sizeof(struct video_clip)*(vw.clipcount+4)); - if (vcp==NULL) - return -ENOMEM; - if (vw.clipcount && copy_from_user(vcp,vw.clips,sizeof(struct video_clip)*vw.clipcount)) { - vfree(vcp); - return -EFAULT; - } - - on = ztv->running; - if (on) - zoran_cap(ztv, 0); - - /* - * strange, it seems xawtv sometimes calls us with 0 - * width and/or height. Ignore these values - */ - if (vw.x == 0) - vw.x = ztv->overinfo.x; - if (vw.y == 0) - vw.y = ztv->overinfo.y; - - /* by now we are committed to the new data... */ - write_lock_irq(&ztv->lock); - ztv->overinfo.x = vw.x; - ztv->overinfo.y = vw.y; - ztv->overinfo.w = vw.width; - ztv->overinfo.h = vw.height; - write_unlock_irq(&ztv->lock); - - /* - * Impose display clips - */ - if (vw.x+vw.width > ztv->swidth) - new_clip(&vw, vcp, ztv->swidth-vw.x, 0, vw.width-1, vw.height-1); - if (vw.y+vw.height > ztv->sheight) - new_clip(&vw, vcp, 0, ztv->sheight-vw.y, vw.width-1, vw.height-1); - - /* built the requested clipping zones */ - zoran_set_geo(ztv, &ztv->overinfo); - zoran_built_overlay(ztv, vw.clipcount, vcp); - vfree(vcp); - - /* if we were on, restart the video engine */ - if (on) - zoran_cap(ztv, 1); - break; - } - - case VIDIOCCAPTURE: - { - int v; - if (get_user(v, (int *)arg)) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCCAPTURE(%d)\n",CARD,v)); - - if (v==0) { - clear_bit(STATE_OVERLAY, &ztv->state); - zoran_cap(ztv, 1); - } - else { - /* is VIDIOCSFBUF, VIDIOCSWIN done? */ - if (ztv->overinfo.busadr==0 || ztv->overinfo.w==0 || ztv->overinfo.h==0) - return -EINVAL; - - set_bit(STATE_OVERLAY, &ztv->state); - zoran_cap(ztv, 1); - } - break; - } - - case VIDIOCGFBUF: - { - struct video_buffer v; - DEBUG(printk(CARD_DEBUG "VIDIOCGFBUF\n",CARD)); - read_lock(&ztv->lock); - v.base = (void *)ztv->overinfo.busadr; - v.height = ztv->sheight; - v.width = ztv->swidth; - v.depth = ztv->depth; - v.bytesperline = ztv->overinfo.bpl; - read_unlock(&ztv->lock); - if(copy_to_user(arg, &v,sizeof(v))) - return -EFAULT; - break; - } - case VIDIOCSFBUF: - { - struct video_buffer v; - if(!capable(CAP_SYS_ADMIN)) - return -EPERM; - if (pcipci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) - return -ENXIO; - if (copy_from_user(&v, arg,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSFBUF(%p,%d,%d,%d,%d)\n",CARD,v.base, v.width,v.height,v.depth,v.bytesperline)); - - if (v.depth!=15 && v.depth!=16 && v.depth!=24 && v.depth!=32) - return -EINVAL; - if (v.bytesperline<1) - return -EINVAL; - if (ztv->running) - return -EBUSY; - write_lock_irq(&ztv->lock); - ztv->overinfo.busadr = (ulong)v.base; - ztv->sheight = v.height; - ztv->swidth = v.width; - ztv->depth = v.depth; /* bits per pixel */ - ztv->overinfo.bpp = ((v.depth+1)&0x38)/8;/* bytes per pixel */ - ztv->overinfo.bpl = v.bytesperline; /* bytes per line */ - write_unlock_irq(&ztv->lock); - break; - } - - case VIDIOCKEY: - { - /* Will be handled higher up .. */ - break; - } - - case VIDIOCSYNC: - { - int i; - if (get_user(i, (int *) arg)) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d)\n",CARD,i)); - if (i<0 || i>ZORAN_MAX_FBUFFERS) - return -EINVAL; - switch (ztv->grabinfo[i].status) { - case FBUFFER_FREE: - return -EINVAL; - case FBUFFER_BUSY: - /* wait till this buffer gets grabbed */ - wait_event_interruptible(ztv->grabq, - (ztv->grabinfo[i].status != FBUFFER_BUSY)); - /* see if a signal did it */ - if (signal_pending(current)) - return -EINTR; - /* don't fall through; a DONE buffer is not UNUSED */ - break; - case FBUFFER_DONE: - ztv->grabinfo[i].status = FBUFFER_FREE; - /* tell ppl we have a spare buffer */ - wake_up_interruptible(&ztv->grabq); - break; - } - DEBUG(printk(CARD_DEBUG "VIDEOCSYNC(%d) returns\n",CARD,i)); - break; - } - - case VIDIOCMCAPTURE: - { - struct video_mmap vm; - struct vidinfo* frame; - if (copy_from_user(&vm,arg,sizeof(vm))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCMCAPTURE(%d,(%d,%d),%d)\n",CARD,vm.frame,vm.width,vm.height,vm.format)); - if (vm.frame<0 || vm.frame>ZORAN_MAX_FBUFFERS || - vm.width<32 || vm.width>768 || - vm.height<32 || vm.height>576 || - vm.format>NRPALETTES || - palette2fmt[vm.format].mode == 0) - return -EINVAL; - - /* we are allowed to take over UNUSED and DONE buffers */ - frame = &ztv->grabinfo[vm.frame]; - if (frame->status == FBUFFER_BUSY) - return -EBUSY; - - /* setup the other parameters if they are given */ - write_lock_irq(&ztv->lock); - frame->w = vm.width; - frame->h = vm.height; - frame->format = vm.format; - frame->bpp = palette2fmt[frame->format].bpp; - frame->bpl = frame->w*frame->bpp; - frame->status = FBUFFER_BUSY; - frame->next = 0; - { /* add to tail of queue */ - struct vidinfo* oldframe = ztv->workqueue; - if (!oldframe) ztv->workqueue = frame; - else { - while (oldframe->next) oldframe = oldframe->next; - oldframe->next = frame; - } - } - write_unlock_irq(&ztv->lock); - zoran_cap(ztv, 1); - break; - } - - case VIDIOCGMBUF: - { - struct video_mbuf mb; - int i; - DEBUG(printk(CARD_DEBUG "VIDIOCGMBUF\n",CARD)); - mb.size = ZORAN_MAX_FBUFSIZE; - mb.frames = ZORAN_MAX_FBUFFERS; - for (i=0; ivideo_dev.minor; - vu.vbi = ztv->vbi_dev.minor; - vu.radio = VIDEO_NO_UNIT; - vu.audio = VIDEO_NO_UNIT; - vu.teletext = VIDEO_NO_UNIT; - if(copy_to_user(arg, &vu,sizeof(vu))) - return -EFAULT; - break; - } - - case VIDIOCGFREQ: - { - unsigned long v = ztv->tuner_freq; - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCGFREQ\n",CARD)); - break; - } - case VIDIOCSFREQ: - { - unsigned long v; - if (copy_from_user(&v, arg, sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSFREQ\n",CARD)); - - if (ztv->have_tuner) { - int fixme = v; - if (i2c_control_device(&(ztv->i2c), I2C_DRIVERID_TUNER, TUNER_SET_TVFREQ, &fixme) < 0) - return -EAGAIN; - } - ztv->tuner_freq = v; - break; - } - - /* Why isn't this in the API? - * And why doesn't it take a buffer number? - case BTTV_FIELDNR: - { - unsigned long v = ztv->lastfieldnr; - if (copy_to_user(arg,&v,sizeof(v))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "BTTV_FIELDNR\n",CARD)); - break; - } - */ - - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static -int zoran_mmap(struct vm_area_struct *vma, struct video_device* dev, const char* adr, unsigned long size) -{ - struct zoran* ztv = (struct zoran*)dev; - unsigned long start = (unsigned long)adr; - unsigned long pos; - - DEBUG(printk(CARD_DEBUG "zoran_mmap(0x%p,%ld)\n",CARD,adr,size)); - - /* sanity checks */ - if (size > ZORAN_MAX_FBUFSIZE || !ztv->fbuffer) - return -EINVAL; - - /* start mapping the whole shabang to user memory */ - pos = (unsigned long)ztv->fbuffer; - while (size>0) { - unsigned long pfn = virt_to_phys((void*)pos) >> PAGE_SHIFT; - if (remap_pfn_range(vma, start, pfn, PAGE_SIZE, PAGE_SHARED)) - return -EAGAIN; - start += PAGE_SIZE; - pos += PAGE_SIZE; - size -= PAGE_SIZE; - } - return 0; -} - -static struct video_device zr36120_template= -{ - .owner = THIS_MODULE, - .name = "UNSET", - .type = VID_TYPE_TUNER|VID_TYPE_CAPTURE|VID_TYPE_OVERLAY, - .hardware = VID_HARDWARE_ZR36120, - .open = zoran_open, - .close = zoran_close, - .read = zoran_read, - .write = zoran_write, - .poll = zoran_poll, - .ioctl = zoran_ioctl, - .compat_ioctl = v4l_compat_ioctl32, - .mmap = zoran_mmap, - .minor = -1, -}; - -static -int vbi_open(struct video_device *dev, int flags) -{ - struct zoran *ztv = dev->priv; - struct vidinfo* item; - - DEBUG(printk(CARD_DEBUG "vbi_open(dev,%d)\n",CARD,flags)); - - /* - * During VBI device open, we continiously grab VBI-like - * data in the vbi buffer when we have nothing to do. - * Only when there is an explicit request for VBI data - * (read call) we /force/ a read. - */ - - /* allocate buffers */ - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - { - item->status = FBUFFER_FREE; - - /* alloc */ - if (!item->memadr) { - item->memadr = bmalloc(ZORAN_VBI_BUFSIZE); - if (!item->memadr) { - /* could not get a buffer, bail out */ - while (item != ztv->readinfo) { - item--; - bfree(item->memadr, ZORAN_VBI_BUFSIZE); - item->memadr = 0; - item->busadr = 0; - } - return -ENOBUFS; - } - } - - /* determine the DMAable address */ - item->busadr = virt_to_bus(item->memadr); - } - - /* do the common part of all open's */ - zoran_common_open(ztv, flags); - - set_bit(STATE_VBI, &ztv->state); - /* start read-ahead */ - zoran_cap(ztv, 1); - - return 0; -} - -static -void vbi_close(struct video_device *dev) -{ - struct zoran *ztv = dev->priv; - struct vidinfo* item; - - DEBUG(printk(CARD_DEBUG "vbi_close(dev)\n",CARD)); - - /* driver specific closure */ - clear_bit(STATE_VBI, &ztv->state); - - zoran_common_close(ztv); - - /* - * This is sucky but right now I can't find a good way to - * be sure its safe to free the buffer. We wait 5-6 fields - * which is more than sufficient to be sure. - */ - msleep(100); /* Wait 1/10th of a second */ - - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - { - if (item->memadr) - bfree(item->memadr, ZORAN_VBI_BUFSIZE); - item->memadr = 0; - } - -} - -/* - * This read function could be used reentrant in a SMP situation. - * - * This is made possible by the spinlock which is kept till we - * found and marked a buffer for our own use. The lock must - * be released as soon as possible to prevent lock contention. - */ -static -long vbi_read(struct video_device* dev, char* buf, unsigned long count, int nonblock) -{ - struct zoran *ztv = dev->priv; - unsigned long max; - struct vidinfo* unused = 0; - struct vidinfo* done = 0; - - DEBUG(printk(CARD_DEBUG "vbi_read(0x%p,%ld,%d)\n",CARD,buf,count,nonblock)); - - /* find ourself a free or completed buffer */ - for (;;) { - struct vidinfo* item; - - write_lock_irq(&ztv->lock); - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) { - if (!unused && item->status == FBUFFER_FREE) - unused = item; - if (!done && item->status == FBUFFER_DONE) - done = item; - } - if (done || unused) - break; - - /* no more free buffers, wait for them. */ - write_unlock_irq(&ztv->lock); - if (nonblock) - return -EWOULDBLOCK; - interruptible_sleep_on(&ztv->vbiq); - if (signal_pending(current)) - return -EINTR; - } - - /* Do we have 'ready' data? */ - if (!done) { - /* no? than this will take a while... */ - if (nonblock) { - write_unlock_irq(&ztv->lock); - return -EWOULDBLOCK; - } - - /* mark the unused buffer as wanted */ - unused->status = FBUFFER_BUSY; - unused->next = 0; - { /* add to tail of queue */ - struct vidinfo* oldframe = ztv->workqueue; - if (!oldframe) ztv->workqueue = unused; - else { - while (oldframe->next) oldframe = oldframe->next; - oldframe->next = unused; - } - } - write_unlock_irq(&ztv->lock); - - /* tell the state machine we want it filled /NOW/ */ - zoran_cap(ztv, 1); - - /* wait till this buffer gets grabbed */ - wait_event_interruptible(ztv->vbiq, - (unused->status != FBUFFER_BUSY)); - /* see if a signal did it */ - if (signal_pending(current)) - return -EINTR; - done = unused; - } - else - write_unlock_irq(&ztv->lock); - - /* Yes! we got data! */ - max = done->bpl * -done->h; - if (count > max) - count = max; - - /* check if the user gave us enough room to write the data */ - if (!access_ok(VERIFY_WRITE, buf, count)) { - count = -EFAULT; - goto out; - } - - /* - * Now transform/strip the data from YUV to Y-only - * NB. Assume the Y is in the LSB of the YUV data. - */ - { - unsigned char* optr = buf; - unsigned char* eptr = buf+count; - - /* are we beeing accessed from an old driver? */ - if (count == 2*19*2048) { - /* - * Extreme HACK, old VBI programs expect 2048 points - * of data, and we only got 864 orso. Double each - * datapoint and clear the rest of the line. - * This way we have appear to have a - * sample_frequency of 29.5 Mc. - */ - int x,y; - unsigned char* iptr = done->memadr+1; - for (y=done->h; optrw; x++) - { - unsigned char a = iptr[x*2]; - __put_user(a, optr++); - __put_user(a, optr++); - } - /* and clear the rest of the line */ - for (x*=2; optrbpl; x++) - __put_user(0, optr++); - /* next line */ - iptr += done->bpl; - } - } - else { - /* - * Other (probably newer) programs asked - * us what geometry we are using, and are - * reading the correct size. - */ - int x,y; - unsigned char* iptr = done->memadr+1; - for (y=done->h; optrw; x++) - __put_user(iptr[x*2], optr++); - /* and clear the rest of the line */ - for (;optrbpl; x++) - __put_user(0, optr++); - /* next line */ - iptr += done->bpl; - } - } - - /* API compliance: - * place the framenumber (half fieldnr) in the last long - */ - __put_user(done->fieldnr/2, ((ulong*)eptr)[-1]); - } - - /* keep the engine running */ - done->status = FBUFFER_FREE; - zoran_cap(ztv, 1); - - /* tell listeners this buffer just became free */ - wake_up_interruptible(&ztv->vbiq); - - /* goodbye */ -out: - DEBUG(printk(CARD_DEBUG "vbi_read() returns %lu\n",CARD,count)); - return count; -} - -static -unsigned int vbi_poll(struct video_device *dev, struct file *file, poll_table *wait) -{ - struct zoran *ztv = dev->priv; - struct vidinfo* item; - unsigned int mask = 0; - - poll_wait(file, &ztv->vbiq, wait); - - for (item=ztv->readinfo; item!=ztv->readinfo+ZORAN_VBI_BUFFERS; item++) - if (item->status == FBUFFER_DONE) - { - mask |= (POLLIN | POLLRDNORM); - break; - } - - DEBUG(printk(CARD_DEBUG "vbi_poll()=%x\n",CARD,mask)); - - return mask; -} - -static -int vbi_ioctl(struct video_device *dev, unsigned int cmd, void *arg) -{ - struct zoran* ztv = dev->priv; - - switch (cmd) { - case VIDIOCGVBIFMT: - { - struct vbi_format f; - DEBUG(printk(CARD_DEBUG "VIDIOCGVBIINFO\n",CARD)); - f.sampling_rate = 14750000UL; - f.samples_per_line = -ztv->readinfo[0].w; - f.sample_format = VIDEO_PALETTE_RAW; - f.start[0] = f.start[1] = ztv->readinfo[0].y; - f.start[1] += 312; - f.count[0] = f.count[1] = -ztv->readinfo[0].h; - f.flags = VBI_INTERLACED; - if (copy_to_user(arg,&f,sizeof(f))) - return -EFAULT; - break; - } - case VIDIOCSVBIFMT: - { - struct vbi_format f; - int i; - if (copy_from_user(&f, arg,sizeof(f))) - return -EFAULT; - DEBUG(printk(CARD_DEBUG "VIDIOCSVBIINFO(%d,%d,%d,%d,%d,%d,%d,%x)\n",CARD,f.sampling_rate,f.samples_per_line,f.sample_format,f.start[0],f.start[1],f.count[0],f.count[1],f.flags)); - - /* lots of parameters are fixed... (PAL) */ - if (f.sampling_rate != 14750000UL || - f.samples_per_line > 864 || - f.sample_format != VIDEO_PALETTE_RAW || - f.start[0] < 0 || - f.start[0] != f.start[1]-312 || - f.count[0] != f.count[1] || - f.start[0]+f.count[0] >= 288 || - f.flags != VBI_INTERLACED) - return -EINVAL; - - write_lock_irq(&ztv->lock); - ztv->readinfo[0].y = f.start[0]; - ztv->readinfo[0].w = -f.samples_per_line; - ztv->readinfo[0].h = -f.count[0]; - ztv->readinfo[0].bpl = f.samples_per_line*ztv->readinfo[0].bpp; - for (i=1; ireadinfo[i] = ztv->readinfo[i]; - write_unlock_irq(&ztv->lock); - break; - } - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static struct video_device vbi_template= -{ - .owner = THIS_MODULE, - .name = "UNSET", - .type = VID_TYPE_CAPTURE|VID_TYPE_TELETEXT, - .hardware = VID_HARDWARE_ZR36120, - .open = vbi_open, - .close = vbi_close, - .read = vbi_read, - .write = zoran_write, - .poll = vbi_poll, - .ioctl = vbi_ioctl, - .minor = -1, -}; - -/* - * Scan for a Zoran chip, request the irq and map the io memory - */ -static -int __init find_zoran(void) -{ - int result; - struct zoran *ztv; - struct pci_dev *dev = NULL; - unsigned char revision; - int zoran_num = 0; - - while ((dev = pci_get_device(PCI_VENDOR_ID_ZORAN,PCI_DEVICE_ID_ZORAN_36120, dev))) - { - /* Ok, a ZR36120/ZR36125 found! */ - ztv = &zorans[zoran_num]; - ztv->dev = dev; - - if (pci_enable_device(dev)) - continue; - - pci_read_config_byte(dev, PCI_CLASS_REVISION, &revision); - printk(KERN_INFO "zoran: Zoran %x (rev %d) ", - dev->device, revision); - printk("bus: %d, devfn: %d, irq: %d, ", - dev->bus->number, dev->devfn, dev->irq); - printk("memory: 0x%08lx.\n", ztv->zoran_adr); - - ztv->zoran_mem = ioremap(ztv->zoran_adr, 0x1000); - DEBUG(printk(KERN_DEBUG "zoran: mapped-memory at 0x%p\n",ztv->zoran_mem)); - - result = request_irq(dev->irq, zoran_irq, - IRQF_SHARED|IRQF_DISABLED,"zoran", ztv); - if (result==-EINVAL) - { - iounmap(ztv->zoran_mem); - printk(KERN_ERR "zoran: Bad irq number or handler\n"); - continue; - } - if (result==-EBUSY) - printk(KERN_ERR "zoran: IRQ %d busy, change your PnP config in BIOS\n",dev->irq); - if (result < 0) { - iounmap(ztv->zoran_mem); - continue; - } - /* Enable bus-mastering */ - pci_set_master(dev); - /* Keep a reference */ - pci_dev_get(dev); - zoran_num++; - } - if(zoran_num) - printk(KERN_INFO "zoran: %d Zoran card(s) found.\n",zoran_num); - return zoran_num; -} - -static -int __init init_zoran(int card) -{ - struct zoran *ztv = &zorans[card]; - int i; - - /* if the given cardtype valid? */ - if (cardtype[card]>=NRTVCARDS) { - printk(KERN_INFO "invalid cardtype(%d) detected\n",cardtype[card]); - return -1; - } - - /* reset the zoran */ - zrand(~ZORAN_PCI_SOFTRESET,ZORAN_PCI); - udelay(10); - zror(ZORAN_PCI_SOFTRESET,ZORAN_PCI); - udelay(10); - - /* zoran chip specific details */ - ztv->card = tvcards+cardtype[card]; /* point to the selected card */ - ztv->norm = 0; /* PAL */ - ztv->tuner_freq = 0; - - /* videocard details */ - ztv->swidth = 800; - ztv->sheight = 600; - ztv->depth = 16; - - /* State details */ - ztv->fbuffer = 0; - ztv->overinfo.kindof = FBUFFER_OVERLAY; - ztv->overinfo.status = FBUFFER_FREE; - ztv->overinfo.x = 0; - ztv->overinfo.y = 0; - ztv->overinfo.w = 768; /* 640 */ - ztv->overinfo.h = 576; /* 480 */ - ztv->overinfo.format = VIDEO_PALETTE_RGB565; - ztv->overinfo.bpp = palette2fmt[ztv->overinfo.format].bpp; - ztv->overinfo.bpl = ztv->overinfo.bpp*ztv->swidth; - ztv->overinfo.busadr = 0; - ztv->overinfo.memadr = 0; - ztv->overinfo.overlay = 0; - for (i=0; igrabinfo[i] = ztv->overinfo; - ztv->grabinfo[i].kindof = FBUFFER_GRAB; - } - init_waitqueue_head(&ztv->grabq); - - /* VBI details */ - ztv->readinfo[0] = ztv->overinfo; - ztv->readinfo[0].kindof = FBUFFER_VBI; - ztv->readinfo[0].w = -864; - ztv->readinfo[0].h = -38; - ztv->readinfo[0].format = VIDEO_PALETTE_YUV422; - ztv->readinfo[0].bpp = palette2fmt[ztv->readinfo[0].format].bpp; - ztv->readinfo[0].bpl = 1024*ztv->readinfo[0].bpp; - for (i=1; ireadinfo[i] = ztv->readinfo[0]; - init_waitqueue_head(&ztv->vbiq); - - /* maintenance data */ - ztv->have_decoder = 0; - ztv->have_tuner = 0; - ztv->tuner_type = 0; - ztv->running = 0; - ztv->users = 0; - rwlock_init(&ztv->lock); - ztv->workqueue = 0; - ztv->fieldnr = 0; - ztv->lastfieldnr = 0; - - if (triton1) - zrand(~ZORAN_VDC_TRICOM, ZORAN_VDC); - - /* external FL determines TOP frame */ - zror(ZORAN_VFEC_EXTFL, ZORAN_VFEC); - - /* set HSpol */ - if (ztv->card->hsync_pos) - zrwrite(ZORAN_VFEH_HSPOL, ZORAN_VFEH); - /* set VSpol */ - if (ztv->card->vsync_pos) - zrwrite(ZORAN_VFEV_VSPOL, ZORAN_VFEV); - - /* Set the proper General Purpuse register bits */ - /* implicit: no softreset, 0 waitstates */ - zrwrite(ZORAN_PCI_SOFTRESET|(ztv->card->gpdir<<0),ZORAN_PCI); - /* implicit: 3 duration and recovery PCI clocks on guest 0-3 */ - zrwrite(ztv->card->gpval<<24,ZORAN_GUEST); - - /* clear interrupt status */ - zrwrite(~0, ZORAN_ISR); - - /* - * i2c template - */ - ztv->i2c = zoran_i2c_bus_template; - sprintf(ztv->i2c.name,"zoran-%d",card); - ztv->i2c.data = ztv; - - /* - * Now add the template and register the device unit - */ - ztv->video_dev = zr36120_template; - strcpy(ztv->video_dev.name, ztv->i2c.name); - ztv->video_dev.priv = ztv; - if (video_register_device(&ztv->video_dev, VFL_TYPE_GRABBER, video_nr) < 0) - return -1; - - ztv->vbi_dev = vbi_template; - strcpy(ztv->vbi_dev.name, ztv->i2c.name); - ztv->vbi_dev.priv = ztv; - if (video_register_device(&ztv->vbi_dev, VFL_TYPE_VBI, vbi_nr) < 0) { - video_unregister_device(&ztv->video_dev); - return -1; - } - i2c_register_bus(&ztv->i2c); - - /* set interrupt mask - the PIN enable will be set later */ - zrwrite(ZORAN_ICR_GIRQ0|ZORAN_ICR_GIRQ1|ZORAN_ICR_CODE, ZORAN_ICR); - - printk(KERN_INFO "%s: installed %s\n",ztv->i2c.name,ztv->card->name); - return 0; -} - -static -void release_zoran(int max) -{ - struct zoran *ztv; - int i; - - for (i=0;idev->irq,ztv); - - /* unregister i2c_bus */ - i2c_unregister_bus((&ztv->i2c)); - - /* unmap and free memory */ - if (ztv->zoran_mem) - iounmap(ztv->zoran_mem); - - /* Drop PCI device */ - pci_dev_put(ztv->dev); - - video_unregister_device(&ztv->video_dev); - video_unregister_device(&ztv->vbi_dev); - } -} - -void __exit zr36120_exit(void) -{ - release_zoran(zoran_cards); -} - -int __init zr36120_init(void) -{ - int card; - - handle_chipset(); - zoran_cards = find_zoran(); - if (zoran_cards <= 0) - return -EIO; - - /* initialize Zorans */ - for (card=0; card -#include - -#include -#include - -#include - -/* - * Debug macro's, place an x behind the ) for actual debug-compilation - * E.g. #define DEBUG(x...) x - */ -#define DEBUG(x...) /* Debug driver */ -#define IDEBUG(x...) /* Debug interrupt handler */ -#define PDEBUG 0 /* Debug PCI writes */ - -/* defined in zr36120_i2c */ -extern struct i2c_bus zoran_i2c_bus_template; - -#define ZORAN_MAX_FBUFFERS 2 -#define ZORAN_MAX_FBUFFER (768*576*2) -#define ZORAN_MAX_FBUFSIZE (ZORAN_MAX_FBUFFERS*ZORAN_MAX_FBUFFER) - -#define ZORAN_VBI_BUFFERS 2 -#define ZORAN_VBI_BUFSIZE (22*1024*2) - -struct tvcard { - char* name; /* name of the cardtype */ - int video_inputs; /* number of channels defined in video_mux */ - int audio_inputs; /* number of channels defined in audio_mux */ - __u32 swapi2c:1, /* need to swap i2c wires SDA/SCL? */ - usegirq1:1, /* VSYNC at GIRQ1 instead of GIRQ0? */ - vsync_pos:1, /* positive VSYNC signal? */ - hsync_pos:1, /* positive HSYNC signal? */ - gpdir:8, /* General Purpose Direction register */ - gpval:8; /* General Purpose Value register */ - int video_mux[6]; /* mapping channel number to physical input */ -#define IS_TUNER 0x80 -#define IS_SVHS 0x40 -#define CHANNEL_MASK 0x3F - int audio_mux[6]; /* mapping channel number to physical input */ -}; -#define TUNER(x) ((x)|IS_TUNER) -#define SVHS(x) ((x)|IS_SVHS) - -struct vidinfo { - struct vidinfo* next; /* next active buffer */ - uint kindof; -#define FBUFFER_OVERLAY 0 -#define FBUFFER_GRAB 1 -#define FBUFFER_VBI 2 - uint status; -#define FBUFFER_FREE 0 -#define FBUFFER_BUSY 1 -#define FBUFFER_DONE 2 - ulong fieldnr; /* # of field, not framer! */ - uint x,y; - int w,h; /* w,h can be negative! */ - uint format; /* index in palette2fmt[] */ - uint bpp; /* lookup from palette2fmt[] */ - uint bpl; /* calc: width * bpp */ - ulong busadr; /* bus addr for DMA engine */ - char* memadr; /* kernel addr for making copies */ - ulong* overlay; /* kernel addr of overlay mask */ -}; - -struct zoran -{ - struct video_device video_dev; -#define CARD_DEBUG KERN_DEBUG "%s(%lu): " -#define CARD_INFO KERN_INFO "%s(%lu): " -#define CARD_ERR KERN_ERR "%s(%lu): " -#define CARD ztv->video_dev.name,ztv->fieldnr - - /* zoran chip specific details */ - struct i2c_bus i2c; /* i2c registration data */ - struct pci_dev* dev; /* ptr to PCI device */ - ulong zoran_adr; /* bus address of IO memory */ - char* zoran_mem; /* kernel address of IO memory */ - struct tvcard* card; /* the cardtype */ - uint norm; /* 0=PAL, 1=NTSC, 2=SECAM */ - uint tuner_freq; /* Current freq in kHz */ - struct video_picture picture; /* Current picture params */ - - /* videocard details */ - uint swidth; /* screen width */ - uint sheight; /* screen height */ - uint depth; /* depth in bits */ - - /* State details */ - char* fbuffer; /* framebuffers for mmap */ - struct vidinfo overinfo; /* overlay data */ - struct vidinfo grabinfo[ZORAN_MAX_FBUFFERS]; /* grabbing data*/ - wait_queue_head_t grabq; /* grabbers queue */ - - /* VBI details */ - struct video_device vbi_dev; - struct vidinfo readinfo[2]; /* VBI data - flip buffers */ - wait_queue_head_t vbiq; /* vbi queue */ - - /* maintenance data */ - int have_decoder; /* did we detect a mux? */ - int have_tuner; /* did we detect a tuner? */ - int users; /* howmany video/vbi open? */ - int tuner_type; /* tuner type, when found */ - int running; /* are we rolling? */ - rwlock_t lock; - long state; /* what is requested of us? */ -#define STATE_OVERLAY 0 -#define STATE_VBI 1 - struct vidinfo* workqueue; /* buffers to grab, head is active */ - ulong fieldnr; /* #field, ticked every VSYNC */ - ulong lastfieldnr; /* #field, ticked every GRAB */ - - int vidInterlace; /* calculated */ - int vidXshift; /* calculated */ - uint vidWidth; /* calculated */ - uint vidHeight; /* calculated */ -}; - -#define zrwrite(dat,adr) writel((dat),(char *) (ztv->zoran_mem+(adr))) -#define zrread(adr) readl(ztv->zoran_mem+(adr)) - -#if PDEBUG == 0 -#define zrand(dat,adr) zrwrite((dat) & zrread(adr), adr) -#define zror(dat,adr) zrwrite((dat) | zrread(adr), adr) -#define zraor(dat,mask,adr) zrwrite( ((dat)&~(mask)) | ((mask)&zrread(adr)), adr) -#else -#define zrand(dat, adr) \ -do { \ - ulong data = (dat) & zrread((adr)); \ - zrwrite(data, (adr)); \ - if (0 != (~(dat) & zrread((adr)))) \ - printk(KERN_DEBUG "zoran: zrand at %d(%d) detected set bits(%x)\n", __LINE__, (adr), (dat)); \ -} while(0) - -#define zror(dat, adr) \ -do { \ - ulong data = (dat) | zrread((adr)); \ - zrwrite(data, (adr)); \ - if ((dat) != ((dat) & zrread(adr))) \ - printk(KERN_DEBUG "zoran: zror at %d(%d) detected unset bits(%x)\n", __LINE__, (adr), (dat)); \ -} while(0) - -#define zraor(dat, mask, adr) \ -do { \ - ulong data; \ - if ((dat) & (mask)) \ - printk(KERN_DEBUG "zoran: zraor at %d(%d) detected bits(%x:%x)\n", __LINE__, (adr), (dat), (mask)); \ - data = ((dat)&~(mask)) | ((mask) & zrread((adr))); \ - zrwrite(data,(adr)); \ - if ( (dat) != (~(mask) & zrread((adr))) ) \ - printk(KERN_DEBUG "zoran: zraor at %d(%d) could not set all bits(%x:%x)\n", __LINE__, (adr), (dat), (mask)); \ -} while(0) -#endif - -#endif - -/* zoran PCI address space */ -#define ZORAN_VFEH 0x000 /* Video Front End Horizontal Conf. */ -#define ZORAN_VFEH_HSPOL (1<<30) -#define ZORAN_VFEH_HSTART (0x3FF<<10) -#define ZORAN_VFEH_HEND (0x3FF<<0) - -#define ZORAN_VFEV 0x004 /* Video Front End Vertical Conf. */ -#define ZORAN_VFEV_VSPOL (1<<30) -#define ZORAN_VFEV_VSTART (0x3FF<<10) -#define ZORAN_VFEV_VEND (0x3FF<<0) - -#define ZORAN_VFEC 0x008 /* Video Front End Scaler and Pixel */ -#define ZORAN_VFEC_EXTFL (1<<26) -#define ZORAN_VFEC_TOPFIELD (1<<25) -#define ZORAN_VFEC_VCLKPOL (1<<24) -#define ZORAN_VFEC_HFILTER (7<<21) -#define ZORAN_VFEC_HFILTER_1 (0<<21) /* no lumi, 3-tap chromo */ -#define ZORAN_VFEC_HFILTER_2 (1<<21) /* 3-tap lumi, 3-tap chromo */ -#define ZORAN_VFEC_HFILTER_3 (2<<21) /* 4-tap lumi, 4-tap chromo */ -#define ZORAN_VFEC_HFILTER_4 (3<<21) /* 5-tap lumi, 4-tap chromo */ -#define ZORAN_VFEC_HFILTER_5 (4<<21) /* 4-tap lumi, 4-tap chromo */ -#define ZORAN_VFEC_DUPFLD (1<<20) -#define ZORAN_VFEC_HORDCM (63<<14) -#define ZORAN_VFEC_VERDCM (63<<8) -#define ZORAN_VFEC_DISPMOD (1<<6) -#define ZORAN_VFEC_RGB (3<<3) -#define ZORAN_VFEC_RGB_YUV422 (0<<3) -#define ZORAN_VFEC_RGB_RGB888 (1<<3) -#define ZORAN_VFEC_RGB_RGB565 (2<<3) -#define ZORAN_VFEC_RGB_RGB555 (3<<3) -#define ZORAN_VFEC_ERRDIF (1<<2) -#define ZORAN_VFEC_PACK24 (1<<1) -#define ZORAN_VFEC_LE (1<<0) - -#define ZORAN_VTOP 0x00C /* Video Display "Top" */ - -#define ZORAN_VBOT 0x010 /* Video Display "Bottom" */ - -#define ZORAN_VSTR 0x014 /* Video Display Stride */ -#define ZORAN_VSTR_DISPSTRIDE (0xFFFF<<16) -#define ZORAN_VSTR_VIDOVF (1<<8) -#define ZORAN_VSTR_SNAPSHOT (1<<1) -#define ZORAN_VSTR_GRAB (1<<0) - -#define ZORAN_VDC 0x018 /* Video Display Conf. */ -#define ZORAN_VDC_VIDEN (1<<31) -#define ZORAN_VDC_MINPIX (0x1F<<25) -#define ZORAN_VDC_TRICOM (1<<24) -#define ZORAN_VDC_VIDWINHT (0x3FF<<12) -#define ZORAN_VDC_VIDWINWID (0x3FF<<0) - -#define ZORAN_MTOP 0x01C /* Masking Map "Top" */ - -#define ZORAN_MBOT 0x020 /* Masking Map "Bottom" */ - -#define ZORAN_OCR 0x024 /* Overlay Control */ -#define ZORAN_OCR_OVLEN (1<<15) -#define ZORAN_OCR_MASKSTRIDE (0xFF<<0) - -#define ZORAN_PCI 0x028 /* System, PCI and GPP Control */ -#define ZORAN_PCI_SOFTRESET (1<<24) -#define ZORAN_PCI_WAITSTATE (3<<16) -#define ZORAN_PCI_GENPURDIR (0xFF<<0) - -#define ZORAN_GUEST 0x02C /* GuestBus Control */ - -#define ZORAN_CSOURCE 0x030 /* Code Source Address */ - -#define ZORAN_CTRANS 0x034 /* Code Transfer Control */ - -#define ZORAN_CMEM 0x038 /* Code Memory Pointer */ - -#define ZORAN_ISR 0x03C /* Interrupt Status Register */ -#define ZORAN_ISR_CODE (1<<28) -#define ZORAN_ISR_GIRQ0 (1<<29) -#define ZORAN_ISR_GIRQ1 (1<<30) - -#define ZORAN_ICR 0x040 /* Interrupt Control Register */ -#define ZORAN_ICR_EN (1<<24) -#define ZORAN_ICR_CODE (1<<28) -#define ZORAN_ICR_GIRQ0 (1<<29) -#define ZORAN_ICR_GIRQ1 (1<<30) - -#define ZORAN_I2C 0x044 /* I2C-Bus */ -#define ZORAN_I2C_SCL (1<<1) -#define ZORAN_I2C_SDA (1<<0) - -#define ZORAN_POST 0x48 /* PostOffice */ -#define ZORAN_POST_PEN (1<<25) -#define ZORAN_POST_TIME (1<<24) -#define ZORAN_POST_DIR (1<<23) -#define ZORAN_POST_GUESTID (3<<20) -#define ZORAN_POST_GUEST (7<<16) -#define ZORAN_POST_DATA (0xFF<<0) - -#endif diff --git a/drivers/media/video/zr36120_i2c.c b/drivers/media/video/zr36120_i2c.c deleted file mode 100644 index 21fde43a6aed7fc26c4fb0a34125edcc6b14e8ec..0000000000000000000000000000000000000000 --- a/drivers/media/video/zr36120_i2c.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - zr36120_i2c.c - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include - -#include -#include - -#include "tuner.h" -#include "zr36120.h" - -/* ----------------------------------------------------------------------- */ -/* I2C functions */ -/* ----------------------------------------------------------------------- */ - -/* software I2C functions */ - -#define I2C_DELAY 10 - -static void i2c_setlines(struct i2c_bus *bus,int ctrl,int data) -{ - struct zoran *ztv = (struct zoran*)bus->data; - unsigned int b = 0; - if (data) b |= ztv->card->swapi2c ? ZORAN_I2C_SCL : ZORAN_I2C_SDA; - if (ctrl) b |= ztv->card->swapi2c ? ZORAN_I2C_SDA : ZORAN_I2C_SCL; - zrwrite(b, ZORAN_I2C); - udelay(I2C_DELAY); -} - -static int i2c_getdataline(struct i2c_bus *bus) -{ - struct zoran *ztv = (struct zoran*)bus->data; - if (ztv->card->swapi2c) - return zrread(ZORAN_I2C) & ZORAN_I2C_SCL; - return zrread(ZORAN_I2C) & ZORAN_I2C_SDA; -} - -static -void attach_inform(struct i2c_bus *bus, int id) -{ - struct zoran *ztv = (struct zoran*)bus->data; - struct video_decoder_capability dc; - int rv; - - switch (id) { - case I2C_DRIVERID_VIDEODECODER: - DEBUG(printk(CARD_INFO "decoder attached\n",CARD)); - - /* fetch the capabilities of the decoder */ - rv = i2c_control_device(&ztv->i2c, I2C_DRIVERID_VIDEODECODER, DECODER_GET_CAPABILITIES, &dc); - if (rv) { - DEBUG(printk(CARD_DEBUG "decoder is not V4L aware!\n",CARD)); - break; - } - DEBUG(printk(CARD_DEBUG "capabilities %d %d %d\n",CARD,dc.flags,dc.inputs,dc.outputs)); - - /* Test if the decoder can de VBI transfers */ - if (dc.flags & 16 /*VIDEO_DECODER_VBI*/) - ztv->have_decoder = 2; - else - ztv->have_decoder = 1; - break; - case I2C_DRIVERID_TUNER: - ztv->have_tuner = 1; - DEBUG(printk(CARD_INFO "tuner attached\n",CARD)); - if (ztv->tuner_type >= 0) - { - if (i2c_control_device(&ztv->i2c,I2C_DRIVERID_TUNER,TUNER_SET_TYPE,&ztv->tuner_type)<0) - DEBUG(printk(CARD_INFO "attach_inform; tuner won't be set to type %d\n",CARD,ztv->tuner_type)); - } - break; - default: - DEBUG(printk(CARD_INFO "attach_inform; unknown device id=%d\n",CARD,id)); - break; - } -} - -static -void detach_inform(struct i2c_bus *bus, int id) -{ - struct zoran *ztv = (struct zoran*)bus->data; - - switch (id) { - case I2C_DRIVERID_VIDEODECODER: - ztv->have_decoder = 0; - DEBUG(printk(CARD_INFO "decoder detached\n",CARD)); - break; - case I2C_DRIVERID_TUNER: - ztv->have_tuner = 0; - DEBUG(printk(CARD_INFO "tuner detached\n",CARD)); - break; - default: - DEBUG(printk(CARD_INFO "detach_inform; unknown device id=%d\n",CARD,id)); - break; - } -} - -struct i2c_bus zoran_i2c_bus_template = -{ - "ZR36120", - I2C_BUSID_ZORAN, - NULL, - - SPIN_LOCK_UNLOCKED, - - attach_inform, - detach_inform, - - i2c_setlines, - i2c_getdataline, - NULL, - NULL -}; diff --git a/drivers/media/video/zr36120_mem.c b/drivers/media/video/zr36120_mem.c deleted file mode 100644 index 416eaa93b8a4a85f0524685d85a95c916c32fac6..0000000000000000000000000000000000000000 --- a/drivers/media/video/zr36120_mem.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - zr36120_mem.c - Zoran 36120/36125 based framegrabbers - - Copyright (C) 1998-1999 Pauline Middelink - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include -#include -#include -#include -#include -#ifdef CONFIG_BIGPHYS_AREA -#include -#endif - -#include "zr36120.h" -#include "zr36120_mem.h" - -/*******************************/ -/* Memory management functions */ -/*******************************/ - -void* bmalloc(unsigned long size) -{ - void* mem; -#ifdef CONFIG_BIGPHYS_AREA - mem = bigphysarea_alloc_pages(size/PAGE_SIZE, 1, GFP_KERNEL); -#else - /* - * The following function got a lot of memory at boottime, - * so we know its always there... - */ - mem = (void*)__get_free_pages(GFP_USER|GFP_DMA,get_order(size)); -#endif - if (mem) { - unsigned long adr = (unsigned long)mem; - while (size > 0) { - SetPageReserved(virt_to_page(phys_to_virt(adr))); - adr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } - return mem; -} - -void bfree(void* mem, unsigned long size) -{ - if (mem) { - unsigned long adr = (unsigned long)mem; - unsigned long siz = size; - while (siz > 0) { - ClearPageReserved(virt_to_page(phys_to_virt(adr))); - adr += PAGE_SIZE; - siz -= PAGE_SIZE; - } -#ifdef CONFIG_BIGPHYS_AREA - bigphysarea_free_pages(mem); -#else - free_pages((unsigned long)mem,get_order(size)); -#endif - } -} - -MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/zr36120_mem.h b/drivers/media/video/zr36120_mem.h deleted file mode 100644 index aad117acc91d558b5d5e1ce72ab31cadc8c7e410..0000000000000000000000000000000000000000 --- a/drivers/media/video/zr36120_mem.h +++ /dev/null @@ -1,3 +0,0 @@ -/* either kmalloc() or bigphysarea() alloced memory - continuous */ -void* bmalloc(unsigned long size); -void bfree(void* mem, unsigned long size);