提交 ae6d2ed7 编写于 作者: R Roland McGrath 提交者: Linus Torvalds

signals: tracehook_notify_jctl change

This changes tracehook_notify_jctl() so it's called with the siglock held,
and changes its argument and return value definition.  These clean-ups
make it a better fit for what new tracing hooks need to check.

Tracing needs the siglock here, held from the time TASK_STOPPED was set,
to avoid potential SIGCONT races if it wants to allow any blocking in its
tracing hooks.

This also folds the finish_stop() function into its caller
do_signal_stop().  The function is short, called only once and only
unconditionally.  It aids readability to fold it in.

[oleg@redhat.com: do not call tracehook_notify_jctl() in TASK_STOPPED state]
[oleg@redhat.com: introduce tracehook_finish_jctl() helper]
Signed-off-by: NRoland McGrath <roland@redhat.com>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 b6fe2d11
/*
* Tracing hooks
*
* Copyright (C) 2008 Red Hat, Inc. All rights reserved.
* Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
......@@ -463,22 +463,38 @@ static inline int tracehook_get_signal(struct task_struct *task,
/**
* tracehook_notify_jctl - report about job control stop/continue
* @notify: nonzero if this is the last thread in the group to stop
* @notify: zero, %CLD_STOPPED or %CLD_CONTINUED
* @why: %CLD_STOPPED or %CLD_CONTINUED
*
* This is called when we might call do_notify_parent_cldstop().
* It's called when about to stop for job control; we are already in
* %TASK_STOPPED state, about to call schedule(). It's also called when
* a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made.
*
* Return nonzero to generate a %SIGCHLD with @why, which is
* normal if @notify is nonzero.
* @notify is zero if we would not ordinarily send a %SIGCHLD,
* or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD.
*
* Called with no locks held.
* @why is %CLD_STOPPED when about to stop for job control;
* we are already in %TASK_STOPPED state, about to call schedule().
* It might also be that we have just exited (check %PF_EXITING),
* but need to report that a group-wide stop is complete.
*
* @why is %CLD_CONTINUED when waking up after job control stop and
* ready to make a delayed @notify report.
*
* Return the %CLD_* value for %SIGCHLD, or zero to generate no signal.
*
* Called with the siglock held.
*/
static inline int tracehook_notify_jctl(int notify, int why)
{
return notify || (current->ptrace & PT_PTRACED);
return notify ?: (current->ptrace & PT_PTRACED) ? why : 0;
}
/**
* tracehook_finish_jctl - report about return from job control stop
*
* This is called by do_signal_stop() after wakeup.
*/
static inline void tracehook_finish_jctl(void)
{
}
#define DEATH_REAP -1
......
......@@ -705,7 +705,7 @@ static int prepare_signal(int sig, struct task_struct *p, int from_ancestor_ns)
if (why) {
/*
* The first thread which returns from finish_stop()
* The first thread which returns from do_signal_stop()
* will take ->siglock, notice SIGNAL_CLD_MASK, and
* notify its parent. See get_signal_to_deliver().
*/
......@@ -1664,29 +1664,6 @@ void ptrace_notify(int exit_code)
spin_unlock_irq(&current->sighand->siglock);
}
static void
finish_stop(int stop_count)
{
/*
* If there are no other threads in the group, or if there is
* a group stop in progress and we are the last to stop,
* report to the parent. When ptraced, every thread reports itself.
*/
if (tracehook_notify_jctl(stop_count == 0, CLD_STOPPED)) {
read_lock(&tasklist_lock);
do_notify_parent_cldstop(current, CLD_STOPPED);
read_unlock(&tasklist_lock);
}
do {
schedule();
} while (try_to_freeze());
/*
* Now we don't run again until continued.
*/
current->exit_code = 0;
}
/*
* This performs the stopping for SIGSTOP and other stop signals.
* We have to stop all threads in the thread group.
......@@ -1696,15 +1673,9 @@ finish_stop(int stop_count)
static int do_signal_stop(int signr)
{
struct signal_struct *sig = current->signal;
int stop_count;
int notify;
if (sig->group_stop_count > 0) {
/*
* There is a group stop in progress. We don't need to
* start another one.
*/
stop_count = --sig->group_stop_count;
} else {
if (!sig->group_stop_count) {
struct task_struct *t;
if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
......@@ -1716,7 +1687,7 @@ static int do_signal_stop(int signr)
*/
sig->group_exit_code = signr;
stop_count = 0;
sig->group_stop_count = 1;
for (t = next_thread(current); t != current; t = next_thread(t))
/*
* Setting state to TASK_STOPPED for a group
......@@ -1725,19 +1696,44 @@ static int do_signal_stop(int signr)
*/
if (!(t->flags & PF_EXITING) &&
!task_is_stopped_or_traced(t)) {
stop_count++;
sig->group_stop_count++;
signal_wake_up(t, 0);
}
sig->group_stop_count = stop_count;
}
if (stop_count == 0)
/*
* If there are no other threads in the group, or if there is
* a group stop in progress and we are the last to stop, report
* to the parent. When ptraced, every thread reports itself.
*/
notify = sig->group_stop_count == 1 ? CLD_STOPPED : 0;
notify = tracehook_notify_jctl(notify, CLD_STOPPED);
/*
* tracehook_notify_jctl() can drop and reacquire siglock, so
* we keep ->group_stop_count != 0 before the call. If SIGCONT
* or SIGKILL comes in between ->group_stop_count == 0.
*/
if (sig->group_stop_count) {
if (!--sig->group_stop_count)
sig->flags = SIGNAL_STOP_STOPPED;
current->exit_code = sig->group_exit_code;
__set_current_state(TASK_STOPPED);
}
spin_unlock_irq(&current->sighand->siglock);
finish_stop(stop_count);
if (notify) {
read_lock(&tasklist_lock);
do_notify_parent_cldstop(current, notify);
read_unlock(&tasklist_lock);
}
/* Now we don't run again until woken by SIGCONT or SIGKILL */
do {
schedule();
} while (try_to_freeze());
tracehook_finish_jctl();
current->exit_code = 0;
return 1;
}
......@@ -1806,14 +1802,15 @@ int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka,
int why = (signal->flags & SIGNAL_STOP_CONTINUED)
? CLD_CONTINUED : CLD_STOPPED;
signal->flags &= ~SIGNAL_CLD_MASK;
spin_unlock_irq(&sighand->siglock);
if (unlikely(!tracehook_notify_jctl(1, why)))
goto relock;
why = tracehook_notify_jctl(why, CLD_CONTINUED);
spin_unlock_irq(&sighand->siglock);
if (why) {
read_lock(&tasklist_lock);
do_notify_parent_cldstop(current->group_leader, why);
read_unlock(&tasklist_lock);
}
goto relock;
}
......@@ -1978,14 +1975,14 @@ void exit_signals(struct task_struct *tsk)
if (unlikely(tsk->signal->group_stop_count) &&
!--tsk->signal->group_stop_count) {
tsk->signal->flags = SIGNAL_STOP_STOPPED;
group_stop = 1;
group_stop = tracehook_notify_jctl(CLD_STOPPED, CLD_STOPPED);
}
out:
spin_unlock_irq(&tsk->sighand->siglock);
if (unlikely(group_stop) && tracehook_notify_jctl(1, CLD_STOPPED)) {
if (unlikely(group_stop)) {
read_lock(&tasklist_lock);
do_notify_parent_cldstop(tsk, CLD_STOPPED);
do_notify_parent_cldstop(tsk, group_stop);
read_unlock(&tasklist_lock);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册