From ae5eb02641233a4e9d1b92d22090f1b1afa14466 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 14 Oct 2008 16:58:37 +0200 Subject: [PATCH] mac80211: rewrite HT handling The HT handling has the following deficiencies, which I've (partially) fixed: * it always uses the AP info even if there is no AP, hence has no chance of working as an AP * it pretends to be HW config, but really is per-BSS * channel sanity checking is left to the drivers * it generally lets the driver control too much HT enabling is still wrong with this patch if you have more than one virtual STA mode interface, but that never happens currently. Once WDS, IBSS or AP/VLAN gets HT capabilities, it will also be wrong, see the comment in ieee80211_enable_ht(). Additionally, this fixes a number of bugs: * mac80211: ieee80211_set_disassoc doesn't notify the driver any more since the refactoring * iwl-agn-rs: always uses the HT capabilities from the wrong stuff mac80211 gives it rather than the actual peer STA * ath9k: a number of bugs resulting from the broken HT API I'm not entirely happy with putting the HT capabilities into struct ieee80211_sta as restricted to our own HT TX capabilities, but I see no cleaner solution for now. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/core.h | 6 +- drivers/net/wireless/ath9k/main.c | 41 +++-- drivers/net/wireless/ath9k/rc.c | 8 +- drivers/net/wireless/ath9k/recv.c | 3 +- drivers/net/wireless/ath9k/xmit.c | 17 +- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 23 ++- drivers/net/wireless/iwlwifi/iwl-agn.c | 39 +++-- drivers/net/wireless/iwlwifi/iwl-core.c | 17 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 1 - drivers/net/wireless/iwlwifi/iwl-sta.c | 33 ++-- include/net/mac80211.h | 59 ++++--- net/mac80211/cfg.c | 6 +- net/mac80211/ht.c | 181 +++++++++------------- net/mac80211/ieee80211_i.h | 12 +- net/mac80211/mlme.c | 88 ++++++----- 15 files changed, 260 insertions(+), 274 deletions(-) diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h index cb3e61e57c4d..59d835b72cd8 100644 --- a/drivers/net/wireless/ath9k/core.h +++ b/drivers/net/wireless/ath9k/core.h @@ -380,7 +380,6 @@ void ath_rx_cleanup(struct ath_softc *sc); int ath_rx_tasklet(struct ath_softc *sc, int flush); int ath_rx_input(struct ath_softc *sc, struct ath_node *node, - int is_ampdu, struct sk_buff *skb, struct ath_recv_status *rx_status, enum ATH_RX_TYPE *status); @@ -650,6 +649,9 @@ struct ath_node { u8 an_smmode; /* SM Power save mode */ u8 an_flags; u8 an_addr[ETH_ALEN]; + + u16 maxampdu; + u8 mpdudensity; }; void ath_tx_resume_tid(struct ath_softc *sc, @@ -919,8 +921,6 @@ enum RATE_TYPE { struct ath_ht_info { enum ath9k_ht_macmode tx_chan_width; - u16 maxampdu; - u8 mpdudensity; u8 ext_chan_offset; }; diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 41cd114c438c..7555c3413384 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -330,25 +330,15 @@ static void ath9k_ht_conf(struct ath_softc *sc, { struct ath_ht_info *ht_info = &sc->sc_ht_info; - if (bss_conf->assoc_ht) { - ht_info->ext_chan_offset = - bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_PARAM_CHA_SEC_OFFSET; - - if (!(bss_conf->ht_cap->cap & - IEEE80211_HT_CAP_40MHZ_INTOLERANT) && - (bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) + if (sc->hw->conf.ht.enabled) { + ht_info->ext_chan_offset = bss_conf->ht.secondary_channel_offset; + + if (bss_conf->ht.width_40_ok) ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; else ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); - ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - bss_conf->ht_cap->ampdu_factor); - ht_info->mpdudensity = - parse_mpdudensity(bss_conf->ht_cap->ampdu_density); - } } @@ -390,7 +380,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; /* Update chainmask */ - ath_update_chainmask(sc, bss_conf->assoc_ht); + ath_update_chainmask(sc, hw->conf.ht.enabled); DPRINTF(sc, ATH_DBG_CONFIG, "%s: bssid %pM aid 0x%x\n", @@ -408,7 +398,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, return; } - if (hw->conf.ht_cap.ht_supported) + if (hw->conf.ht.enabled) sc->sc_ah->ah_channels[pos].chanmode = ath_get_extchanmode(sc, curchan); else @@ -531,7 +521,6 @@ int _ath_rx_indicate(struct ath_softc *sc, if (an) { ath_rx_input(sc, an, - hw->conf.ht_cap.ht_supported, skb, status, &st); } if (!an || (st != ATH_RX_CONSUMED)) @@ -1241,6 +1230,9 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) __func__, curchan->center_freq); + /* Update chainmask */ + ath_update_chainmask(sc, conf->ht.enabled); + pos = ath_get_channel(sc, curchan); if (pos == -1) { DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); @@ -1251,7 +1243,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; - if (sc->sc_curaid && hw->conf.ht_cap.ht_supported) + if (sc->sc_curaid && hw->conf.ht.enabled) sc->sc_ah->ah_channels[pos].chanmode = ath_get_extchanmode(sc, curchan); @@ -1434,6 +1426,14 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw, } else { ath_node_get(sc, sta->addr); } + + /* XXX: Is this right? Can the capabilities change? */ + an = ath_node_find(sc, sta->addr); + an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + sta->ht_cap.ampdu_factor); + an->mpdudensity = + parse_mpdudensity(sta->ht_cap.ampdu_density); + spin_unlock_irqrestore(&sc->node_lock, flags); break; case STA_NOTIFY_REMOVE: @@ -1552,9 +1552,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_HT) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n", - __func__, - bss_conf->assoc_ht); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT\n", + __func__); ath9k_ht_conf(sc, bss_conf); } diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index ee2dbce42b4d..9b2526030965 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -1838,7 +1838,7 @@ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv) struct ath_softc *sc = hw->priv; u32 capflag = 0; - if (hw->conf.ht_cap.ht_supported) { + if (hw->conf.ht.enabled) { capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG; if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040) capflag |= ATH_RC_CW40_FLAG; @@ -1979,7 +1979,7 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband, /* Check if aggregation has to be enabled for this tid */ - if (hw->conf.ht_cap.ht_supported) { + if (hw->conf.ht.enabled) { if (ieee80211_is_data_qos(fc)) { qc = ieee80211_get_qos_ctl(hdr); tid = qc[0] & 0xf; @@ -2026,9 +2026,9 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband, DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__); ath_setup_rates(sc, sband, sta, ath_rc_priv); - if (sc->hw->conf.flags & IEEE80211_CONF_SUPPORT_HT_MODE) { + if (sc->hw->conf.ht.enabled) { for (i = 0; i < 77; i++) { - if (sc->hw->conf.ht_cap.mcs.rx_mask[i/8] & (1<<(i%8))) + if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8))) ath_rc_priv->neg_ht_rates.rs_rates[j++] = i; if (j == ATH_RATE_MAX) break; diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 010fcdfec3f6..828322840a86 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -720,12 +720,11 @@ void ath_flushrecv(struct ath_softc *sc) int ath_rx_input(struct ath_softc *sc, struct ath_node *an, - int is_ampdu, struct sk_buff *skb, struct ath_recv_status *rx_status, enum ATH_RX_TYPE *status) { - if (is_ampdu && (sc->sc_flags & SC_OP_RXAGGR)) { + if (sc->sc_flags & SC_OP_RXAGGR) { *status = ATH_RX_CONSUMED; return ath_ampdu_input(sc, an, skb, rx_status); } else { diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c index 3770fbe84fce..ba818cc2fb5c 100644 --- a/drivers/net/wireless/ath9k/xmit.c +++ b/drivers/net/wireless/ath9k/xmit.c @@ -300,7 +300,8 @@ static int ath_tx_prepare(struct ath_softc *sc, if (ieee80211_is_data(fc) && !txctl->use_minrate) { /* Enable HT only for DATA frames and not for EAPOL */ - txctl->ht = (hw->conf.ht_cap.ht_supported && + /* XXX why AMPDU only?? */ + txctl->ht = (hw->conf.ht.enabled && (tx_info->flags & IEEE80211_TX_CTL_AMPDU)); if (is_multicast_ether_addr(hdr->addr1)) { @@ -1450,7 +1451,8 @@ static int ath_tx_send_ampdu(struct ath_softc *sc, */ static u32 ath_lookup_rate(struct ath_softc *sc, - struct ath_buf *bf) + struct ath_buf *bf, + struct ath_atx_tid *tid) { const struct ath9k_rate_table *rt = sc->sc_currates; struct sk_buff *skb; @@ -1504,7 +1506,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, * The IE, however can hold upto 65536, which shows up here * as zero. Ignore 65536 since we are constrained by hw. */ - maxampdu = sc->sc_ht_info.maxampdu; + maxampdu = tid->an->maxampdu; if (maxampdu) aggr_limit = min(aggr_limit, maxampdu); @@ -1518,6 +1520,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc, */ static int ath_compute_num_delims(struct ath_softc *sc, + struct ath_atx_tid *tid, struct ath_buf *bf, u16 frmlen) { @@ -1545,7 +1548,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, * required minimum length for subframe. Take into account * whether high rate is 20 or 40Mhz and half or full GI. */ - mpdudensity = sc->sc_ht_info.mpdudensity; + mpdudensity = tid->an->mpdudensity; /* * If there is no mpdu density restriction, no further calculation @@ -1619,7 +1622,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc, } if (!rl) { - aggr_limit = ath_lookup_rate(sc, bf); + aggr_limit = ath_lookup_rate(sc, bf, tid); rl = 1; /* * Is rate dual stream @@ -1657,7 +1660,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc, * Get the delimiters needed to meet the MPDU * density for this node. */ - ndelim = ath_compute_num_delims(sc, bf_first, bf->bf_frmlen); + ndelim = ath_compute_num_delims(sc, tid, bf_first, bf->bf_frmlen); bpad = PADBYTES(al_delta) + (ndelim << 2); @@ -2629,7 +2632,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) struct ath_atx_ac *ac; int tidno, acno; - sc->sc_ht_info.maxampdu = ATH_AMPDU_LIMIT_DEFAULT; + an->maxampdu = ATH_AMPDU_LIMIT_DEFAULT; /* * Init per tid tx state diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index cd1bff590491..e10e0ca09ce9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -1133,8 +1133,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, s32 rate; s8 is_green = lq_sta->is_green; - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_cap.ht_supported) + if (!conf->ht.enabled || !sta->ht_cap.ht_supported) return -1; if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) @@ -1201,8 +1200,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, u8 is_green = lq_sta->is_green; s32 rate; - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) || - !sta->ht_cap.ht_supported) + if (!conf->ht.enabled || !sta->ht_cap.ht_supported) return -1; IWL_DEBUG_RATE("LQ: try to switch to SISO\n"); @@ -2001,9 +1999,8 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * stay with best antenna legacy modulation for a while * before next round of mode comparisons. */ tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); - if (is_legacy(tbl1->lq_type) && - (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) && - (lq_sta->action_counter >= 1)) { + if (is_legacy(tbl1->lq_type) && !conf->ht.enabled && + lq_sta->action_counter >= 1) { lq_sta->action_counter = 0; IWL_DEBUG_RATE("LQ: STAY in legacy table\n"); rs_set_stay_in_table(priv, 1, lq_sta); @@ -2238,19 +2235,19 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband, * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3), * supp_rates[] does not; shift to convert format, force 9 MBits off. */ - lq_sta->active_siso_rate = conf->ht_cap.mcs.rx_mask[0] << 1; - lq_sta->active_siso_rate |= conf->ht_cap.mcs.rx_mask[0] & 0x1; + lq_sta->active_siso_rate = sta->ht_cap.mcs.rx_mask[0] << 1; + lq_sta->active_siso_rate |= sta->ht_cap.mcs.rx_mask[0] & 0x1; lq_sta->active_siso_rate &= ~((u16)0x2); lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; /* Same here */ - lq_sta->active_mimo2_rate = conf->ht_cap.mcs.rx_mask[1] << 1; - lq_sta->active_mimo2_rate |= conf->ht_cap.mcs.rx_mask[1] & 0x1; + lq_sta->active_mimo2_rate = sta->ht_cap.mcs.rx_mask[1] << 1; + lq_sta->active_mimo2_rate |= sta->ht_cap.mcs.rx_mask[1] & 0x1; lq_sta->active_mimo2_rate &= ~((u16)0x2); lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; - lq_sta->active_mimo3_rate = conf->ht_cap.mcs.rx_mask[2] << 1; - lq_sta->active_mimo3_rate |= conf->ht_cap.mcs.rx_mask[2] & 0x1; + lq_sta->active_mimo3_rate = sta->ht_cap.mcs.rx_mask[2] << 1; + lq_sta->active_mimo3_rate |= sta->ht_cap.mcs.rx_mask[2] & 0x1; lq_sta->active_mimo3_rate &= ~((u16)0x2); lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 79a24410dd0a..7c3eb3d8f7e7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -552,17 +552,30 @@ static int iwl4965_send_beacon_cmd(struct iwl_priv *priv) static void iwl4965_ht_conf(struct iwl_priv *priv, struct ieee80211_bss_conf *bss_conf) { - struct ieee80211_sta_ht_cap *ht_conf = bss_conf->ht_cap; - struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf; + struct ieee80211_sta_ht_cap *ht_conf; struct iwl_ht_info *iwl_conf = &priv->current_ht_config; + struct ieee80211_sta *sta; IWL_DEBUG_MAC80211("enter: \n"); - iwl_conf->is_ht = bss_conf->assoc_ht; - if (!iwl_conf->is_ht) return; + + /* + * It is totally wrong to base global information on something + * that is valid only when associated, alas, this driver works + * that way and I don't know how to fix it. + */ + + rcu_read_lock(); + sta = ieee80211_find_sta(priv->hw, priv->bssid); + if (!sta) { + rcu_read_unlock(); + return; + } + ht_conf = &sta->ht_cap; + if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20) iwl_conf->sgf |= HT_SHORT_GI_20MHZ; if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40) @@ -574,8 +587,8 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, iwl_conf->supported_chan_width = !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40); - iwl_conf->extension_chan_offset = - ht_bss_conf->bss_cap & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; + + iwl_conf->extension_chan_offset = bss_conf->ht.secondary_channel_offset; /* If no above or below channel supplied disable FAT channel */ if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE && iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) { @@ -587,15 +600,14 @@ static void iwl4965_ht_conf(struct iwl_priv *priv, memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16); - iwl_conf->control_channel = ht_bss_conf->primary_channel; - iwl_conf->tx_chan_width = - !!(ht_bss_conf->bss_cap & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY); + iwl_conf->tx_chan_width = bss_conf->ht.width_40_ok; iwl_conf->ht_protection = - ht_bss_conf->bss_op_mode & IEEE80211_HT_OP_MODE_PROTECTION; + bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; iwl_conf->non_GF_STA_present = - !!(ht_bss_conf->bss_op_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + !!(bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); + + rcu_read_unlock(); - IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel); IWL_DEBUG_MAC80211("leave\n"); } @@ -2746,6 +2758,8 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&priv->mutex); IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value); + priv->current_ht_config.is_ht = conf->ht.enabled; + if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) { IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n"); goto out; @@ -3104,7 +3118,6 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw, } if (changes & BSS_CHANGED_HT) { - IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht); iwl4965_ht_conf(priv, bss_conf); iwl_set_rxon_chain(priv); } diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 4678da447ff6..10f5a0a233fe 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -637,8 +637,8 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv, } return iwl_is_channel_extension(priv, priv->band, - iwl_ht_conf->control_channel, - iwl_ht_conf->extension_chan_offset); + le16_to_cpu(priv->staging_rxon.channel), + iwl_ht_conf->extension_chan_offset); } EXPORT_SYMBOL(iwl_is_fat_tx_allowed); @@ -663,13 +663,6 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK | RXON_FLG_CHANNEL_MODE_PURE_40_MSK); - if (le16_to_cpu(rxon->channel) != ht_info->control_channel) { - IWL_DEBUG_ASSOC("control diff than current %d %d\n", - le16_to_cpu(rxon->channel), - ht_info->control_channel); - return; - } - /* Note: control channel is opposite of extension channel */ switch (ht_info->extension_chan_offset) { case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: @@ -692,14 +685,12 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X " "rxon flags 0x%X operation mode :0x%X " - "extension channel offset 0x%x " - "control chan %d\n", + "extension channel offset 0x%x\n", ht_info->mcs.rx_mask[0], ht_info->mcs.rx_mask[1], ht_info->mcs.rx_mask[2], le32_to_cpu(rxon->flags), ht_info->ht_protection, - ht_info->extension_chan_offset, - ht_info->control_channel); + ht_info->extension_chan_offset); return; } EXPORT_SYMBOL(iwl_set_rxon_ht); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 572250ee9d58..2e9514933970 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -413,7 +413,6 @@ struct iwl_ht_info { u8 mpdu_density; struct ieee80211_mcs_info mcs; /* BSS related data */ - u8 control_channel; u8 extension_chan_offset; u8 tx_chan_width; u8 ht_protection; diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index b9b8554433a6..218483d096cc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -890,20 +890,31 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap) */ int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap) { + struct ieee80211_sta *sta; + struct ieee80211_sta_ht_cap ht_config; + struct ieee80211_sta_ht_cap *cur_ht_config = NULL; u8 sta_id; /* Add station to device's station table */ - struct ieee80211_conf *conf = &priv->hw->conf; - struct ieee80211_sta_ht_cap *cur_ht_config = &conf->ht_cap; - - if ((is_ap) && - (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) && - (priv->iw_mode == NL80211_IFTYPE_STATION)) - sta_id = iwl_add_station_flags(priv, addr, is_ap, - 0, cur_ht_config); - else - sta_id = iwl_add_station_flags(priv, addr, is_ap, - 0, NULL); + + /* + * XXX: This check is definitely not correct, if we're an AP + * it'll always be false which is not what we want, but + * it doesn't look like iwlagn is prepared to be an HT + * AP anyway. + */ + if (priv->current_ht_config.is_ht) { + rcu_read_lock(); + sta = ieee80211_find_sta(priv->hw, addr); + if (sta) { + memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config)); + cur_ht_config = &ht_config; + } + rcu_read_unlock(); + } + + sta_id = iwl_add_station_flags(priv, addr, is_ap, + 0, cur_ht_config); /* Set up default rate scaling table in device's station table */ iwl_sta_init_lq(priv, addr, is_ap); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 94ff3eface49..9801afb62545 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3,7 +3,7 @@ * * Copyright 2002-2005, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc - * Copyright 2007 Johannes Berg + * Copyright 2007-2008 Johannes Berg * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -81,22 +81,6 @@ enum ieee80211_notification_types { IEEE80211_NOTIFY_RE_ASSOC, }; -/** - * struct ieee80211_ht_bss_info - describing BSS's HT characteristics - * - * This structure describes most essential parameters needed - * to describe 802.11n HT characteristics in a BSS. - * - * @primary_channel: channel number of primery channel - * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width) - * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection) - */ -struct ieee80211_ht_bss_info { - u8 primary_channel; - u8 bss_cap; /* use IEEE80211_HT_IE_CHA_ */ - u8 bss_op_mode; /* use IEEE80211_HT_IE_ */ -}; - /** * enum ieee80211_max_queues - maximum number of queues * @@ -171,6 +155,19 @@ enum ieee80211_bss_change { BSS_CHANGED_BASIC_RATES = 1<<5, }; +/** + * struct ieee80211_bss_ht_conf - BSS's changing HT configuration + * @secondary_channel_offset: secondary channel offset, uses + * %IEEE80211_HT_PARAM_CHA_SEC_ values + * @width_40_ok: indicates that 40 MHz bandwidth may be used for TX + * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info) + */ +struct ieee80211_bss_ht_conf { + u8 secondary_channel_offset; + bool width_40_ok; + u16 operation_mode; +}; + /** * struct ieee80211_bss_conf - holds the BSS's changing parameters * @@ -190,9 +187,7 @@ enum ieee80211_bss_change { * @timestamp: beacon timestamp * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp - * @assoc_ht: association in HT mode - * @ht_cap: ht capabilities - * @ht_bss_conf: ht extended capabilities + * @ht: BSS's HT configuration * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. @@ -210,10 +205,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 timestamp; u64 basic_rates; - /* ht related data */ - bool assoc_ht; - struct ieee80211_sta_ht_cap *ht_cap; - struct ieee80211_ht_bss_info *ht_bss_conf; + struct ieee80211_bss_ht_conf ht; }; /** @@ -447,13 +439,11 @@ struct ieee80211_rx_status { * Flags to define PHY configuration options * * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) - * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported) * @IEEE80211_CONF_PS: Enable 802.11 power save mode */ enum ieee80211_conf_flags { IEEE80211_CONF_RADIOTAP = (1<<0), - IEEE80211_CONF_SUPPORT_HT_MODE = (1<<1), - IEEE80211_CONF_PS = (1<<2), + IEEE80211_CONF_PS = (1<<1), }; /* XXX: remove all this once drivers stop trying to use it */ @@ -463,6 +453,10 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) } #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME()) +struct ieee80211_ht_conf { + bool enabled; +}; + /** * enum ieee80211_conf_changed - denotes which configuration changed * @@ -474,6 +468,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed + * @IEEE80211_CONF_CHANGE_HT: HT configuration changed */ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), @@ -484,6 +479,7 @@ enum ieee80211_conf_changed { IEEE80211_CONF_CHANGE_POWER = BIT(5), IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_HT = BIT(8), }; /** @@ -496,9 +492,8 @@ enum ieee80211_conf_changed { * @listen_interval: listen interval in units of beacon interval * @flags: configuration flags defined above * @power_level: requested transmit power (in dBm) - * @ht_cap: describes current self configuration of 802.11n HT capabilities - * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters * @channel: the channel to tune to + * @ht: the HT configuration for the device * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, * but actually means the number of transmissions not the number of retries @@ -517,9 +512,7 @@ struct ieee80211_conf { u8 long_frame_max_tx_count, short_frame_max_tx_count; struct ieee80211_channel *channel; - - struct ieee80211_sta_ht_cap ht_cap; - struct ieee80211_ht_bss_info ht_bss_conf; + struct ieee80211_ht_conf ht; }; /** @@ -715,7 +708,7 @@ enum set_key_cmd { * @addr: MAC address * @aid: AID we assigned to the station if we're an AP * @supp_rates: Bitmap of supported rates (per band) - * @ht_cap: HT capabilities of this STA + * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 28382b5c7c25..55e3a26510ed 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -582,6 +582,8 @@ static void sta_apply_parameters(struct ieee80211_local *local, struct ieee80211_supported_band *sband; struct ieee80211_sub_if_data *sdata = sta->sdata; + sband = local->hw.wiphy->bands[local->oper_channel->band]; + /* * FIXME: updating the flags is racy when this function is * called from ieee80211_change_station(), this will @@ -622,7 +624,6 @@ static void sta_apply_parameters(struct ieee80211_local *local, if (params->supported_rates) { rates = 0; - sband = local->hw.wiphy->bands[local->oper_channel->band]; for (i = 0; i < params->supported_rates_len; i++) { int rate = (params->supported_rates[i] & 0x7f) * 5; @@ -635,7 +636,8 @@ static void sta_apply_parameters(struct ieee80211_local *local, } if (params->ht_capa) - ieee80211_ht_cap_ie_to_sta_ht_cap(params->ht_capa, + ieee80211_ht_cap_ie_to_sta_ht_cap(sband, + params->ht_capa, &sta->sta.ht_cap); if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) { diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index e2d121bf2745..42c3e590df98 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -20,114 +20,38 @@ #include "sta_info.h" #include "wme.h" -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_ht_cap *ht_cap_ie, +void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, + struct ieee80211_ht_cap *ht_cap_ie, struct ieee80211_sta_ht_cap *ht_cap) { + u8 ampdu_info, tx_mcs_set_cap; + int i, max_tx_streams; BUG_ON(!ht_cap); memset(ht_cap, 0, sizeof(*ht_cap)); - if (ht_cap_ie) { - u8 ampdu_info = ht_cap_ie->ampdu_params_info; - - ht_cap->ht_supported = true; - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info); - ht_cap->ampdu_factor = - ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; - ht_cap->ampdu_density = - (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; - memcpy(&ht_cap->mcs, &ht_cap_ie->mcs, sizeof(ht_cap->mcs)); - } else - ht_cap->ht_supported = false; -} - -void ieee80211_ht_info_ie_to_ht_bss_info( - struct ieee80211_ht_info *ht_add_info_ie, - struct ieee80211_ht_bss_info *bss_info) -{ - BUG_ON(!bss_info); - - memset(bss_info, 0, sizeof(*bss_info)); - - if (ht_add_info_ie) { - u16 op_mode; - op_mode = le16_to_cpu(ht_add_info_ie->operation_mode); - - bss_info->primary_channel = ht_add_info_ie->control_chan; - bss_info->bss_cap = ht_add_info_ie->ht_param; - bss_info->bss_op_mode = (u8)(op_mode & 0xff); - } -} - -/* - * ieee80211_handle_ht should be called only after the operating band - * has been determined as ht configuration depends on the hw's - * HT abilities for a specific band. - */ -u32 ieee80211_handle_ht(struct ieee80211_local *local, - struct ieee80211_sta_ht_cap *req_ht_cap, - struct ieee80211_ht_bss_info *req_bss_cap) -{ - struct ieee80211_conf *conf = &local->hw.conf; - struct ieee80211_supported_band *sband; - struct ieee80211_sta_ht_cap ht_cap; - struct ieee80211_ht_bss_info ht_bss_conf; - u32 changed = 0; - int i; - u8 max_tx_streams; - u8 tx_mcs_set_cap; - bool enable_ht = true; - - sband = local->hw.wiphy->bands[conf->channel->band]; - - memset(&ht_cap, 0, sizeof(ht_cap)); - memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info)); - - /* HT is not supported */ - if (!sband->ht_cap.ht_supported) - enable_ht = false; - - /* disable HT */ - if (!enable_ht) { - if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) - changed |= BSS_CHANGED_HT; - conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE; - conf->ht_cap.ht_supported = false; - return changed; - } - - - if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) - changed |= BSS_CHANGED_HT; - - conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE; - ht_cap.ht_supported = true; + if (!ht_cap_ie) + return; - ht_cap.cap = req_ht_cap->cap & sband->ht_cap.cap; - ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS; - ht_cap.cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; + ht_cap->ht_supported = true; - ht_bss_conf.primary_channel = req_bss_cap->primary_channel; - ht_bss_conf.bss_cap = req_bss_cap->bss_cap; - ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode; + ht_cap->cap = ht_cap->cap & sband->ht_cap.cap; + ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS; + ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS; - ht_cap.ampdu_factor = req_ht_cap->ampdu_factor; - ht_cap.ampdu_density = req_ht_cap->ampdu_density; + ampdu_info = ht_cap_ie->ampdu_params_info; + ht_cap->ampdu_factor = + ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; + ht_cap->ampdu_density = + (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; /* own MCS TX capabilities */ tx_mcs_set_cap = sband->ht_cap.mcs.tx_params; - /* - * configure supported Tx MCS according to requested MCS - * (based in most cases on Rx capabilities of peer) and self - * Tx MCS capabilities (as defined by low level driver HW - * Tx capabilities) - */ - /* can we TX with MCS rates? */ if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED)) - goto check_changed; + return; /* Counting from 0, therefore +1 */ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF) @@ -145,29 +69,73 @@ u32 ieee80211_handle_ht(struct ieee80211_local *local, * - remainder are multiple spatial streams using unequal modulation */ for (i = 0; i < max_tx_streams; i++) - ht_cap.mcs.rx_mask[i] = - sband->ht_cap.mcs.rx_mask[i] & - req_ht_cap->mcs.rx_mask[i]; + ht_cap->mcs.rx_mask[i] = + sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION) for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE; i < IEEE80211_HT_MCS_MASK_LEN; i++) - ht_cap.mcs.rx_mask[i] = + ht_cap->mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & - req_ht_cap->mcs.rx_mask[i]; + ht_cap_ie->mcs.rx_mask[i]; /* handle MCS rate 32 too */ - if (sband->ht_cap.mcs.rx_mask[32/8] & - req_ht_cap->mcs.rx_mask[32/8] & 1) - ht_cap.mcs.rx_mask[32/8] |= 1; + if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1) + ht_cap->mcs.rx_mask[32/8] |= 1; +} + +/* + * ieee80211_enable_ht should be called only after the operating band + * has been determined as ht configuration depends on the hw's + * HT abilities for a specific band. + */ +u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, + struct ieee80211_ht_info *hti, + u16 ap_ht_cap_flags) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_supported_band *sband; + struct ieee80211_bss_ht_conf ht; + u32 changed = 0; + bool enable_ht = true, ht_changed; + + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + + memset(&ht, 0, sizeof(ht)); + + /* HT is not supported */ + if (!sband->ht_cap.ht_supported) + enable_ht = false; + + /* check that channel matches the right operating channel */ + if (local->hw.conf.channel->center_freq != + ieee80211_channel_to_frequency(hti->control_chan)) + enable_ht = false; + + /* + * XXX: This is totally incorrect when there are multiple virtual + * interfaces, needs to be fixed later. + */ + ht_changed = local->hw.conf.ht.enabled != enable_ht; + local->hw.conf.ht.enabled = enable_ht; + if (ht_changed) + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT); + + /* disable HT */ + if (!enable_ht) + return 0; + ht.secondary_channel_offset = + hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; + ht.width_40_ok = + !(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) && + (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) && + (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY); + ht.operation_mode = le16_to_cpu(hti->operation_mode); - check_changed: /* if bss configuration changed store the new one */ - if (memcmp(&conf->ht_cap, &ht_cap, sizeof(ht_cap)) || - memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) { + if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) { changed |= BSS_CHANGED_HT; - memcpy(&conf->ht_cap, &ht_cap, sizeof(ht_cap)); - memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf)); + sdata->vif.bss_conf.ht = ht; } return changed; @@ -900,8 +868,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, /* sanity check for incoming parameters: * check if configuration can support the BA policy * and if buffer size does not exceeds max value */ + /* XXX: check own ht delayed BA capability?? */ if (((ba_policy != 1) - && (!(conf->ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) + && (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA))) || (buf_size > IEEE80211_MAX_AMPDU_BUF)) { status = WLAN_STATUS_INVALID_QOS_PARAM; #ifdef CONFIG_MAC80211_HT_DEBUG diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 859b5b001f22..6f8756d26a93 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -955,14 +955,12 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev); int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev); /* HT */ -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_ht_cap *ht_cap_ie, +void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband, + struct ieee80211_ht_cap *ht_cap_ie, struct ieee80211_sta_ht_cap *ht_cap); -void ieee80211_ht_info_ie_to_ht_bss_info( - struct ieee80211_ht_info *ht_add_info_ie, - struct ieee80211_ht_bss_info *bss_info); -u32 ieee80211_handle_ht(struct ieee80211_local *local, - struct ieee80211_sta_ht_cap *req_ht_cap, - struct ieee80211_ht_bss_info *req_bss_cap); +u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, + struct ieee80211_ht_info *hti, + u16 ap_ht_cap_flags); void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn); void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9c5f5c37a49e..39bc9c69893b 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -700,14 +700,15 @@ static void ieee80211_sta_send_associnfo(struct ieee80211_sub_if_data *sdata, static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, - struct ieee80211_if_sta *ifsta) + struct ieee80211_if_sta *ifsta, + u32 bss_info_changed) { struct ieee80211_local *local = sdata->local; struct ieee80211_conf *conf = &local_to_hw(local)->conf; - u32 changed = BSS_CHANGED_ASSOC; struct ieee80211_bss *bss; + bss_info_changed |= BSS_CHANGED_ASSOC; ifsta->flags |= IEEE80211_STA_ASSOCIATED; if (sdata->vif.type != NL80211_IFTYPE_STATION) @@ -722,19 +723,12 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.timestamp = bss->timestamp; sdata->vif.bss_conf.dtim_period = bss->dtim_period; - changed |= ieee80211_handle_bss_capability(sdata, + bss_info_changed |= ieee80211_handle_bss_capability(sdata, bss->capability, bss->has_erp_value, bss->erp_value); ieee80211_rx_bss_put(local, bss); } - if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) { - changed |= BSS_CHANGED_HT; - sdata->vif.bss_conf.assoc_ht = 1; - sdata->vif.bss_conf.ht_cap = &conf->ht_cap; - sdata->vif.bss_conf.ht_bss_conf = &conf->ht_bss_conf; - } - ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET; memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN); ieee80211_sta_send_associnfo(sdata, ifsta); @@ -748,8 +742,8 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, * when we have associated, we aren't checking whether it actually * changed or not. */ - changed |= BSS_CHANGED_BASIC_RATES; - ieee80211_bss_info_change_notify(sdata, changed); + bss_info_changed |= BSS_CHANGED_BASIC_RATES; + ieee80211_bss_info_change_notify(sdata, bss_info_changed); netif_tx_start_all_queues(sdata->dev); netif_carrier_on(sdata->dev); @@ -813,7 +807,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct sta_info *sta; - u32 changed = BSS_CHANGED_ASSOC; + u32 changed = 0; rcu_read_lock(); @@ -847,15 +841,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ifsta->flags &= ~IEEE80211_STA_ASSOCIATED; changed |= ieee80211_reset_erp_info(sdata); - if (sdata->vif.bss_conf.assoc_ht) - changed |= BSS_CHANGED_HT; - - sdata->vif.bss_conf.assoc_ht = 0; - sdata->vif.bss_conf.ht_cap = NULL; - sdata->vif.bss_conf.ht_bss_conf = NULL; - ieee80211_led_assoc(local, 0); - sdata->vif.bss_conf.assoc = 0; + changed |= BSS_CHANGED_ASSOC; + sdata->vif.bss_conf.assoc = false; ieee80211_sta_send_apinfo(sdata, ifsta); @@ -867,6 +855,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); sta_info_destroy(sta); + + local->hw.conf.ht.enabled = false; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT); + + ieee80211_bss_info_change_notify(sdata, changed); } static int ieee80211_sta_wep_configured(struct ieee80211_sub_if_data *sdata) @@ -1184,8 +1177,10 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems elems; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; u8 *pos; + u32 changed = 0; int i, j; bool have_higher_than_11mbit = false; + u16 ap_ht_cap_flags; /* AssocResp and ReassocResp have identical structure, so process both * of them in this function. */ @@ -1333,15 +1328,11 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, else sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; - if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param && - (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) { - struct ieee80211_ht_bss_info bss_info; - ieee80211_ht_cap_ie_to_sta_ht_cap( + if (elems.ht_cap_elem) + ieee80211_ht_cap_ie_to_sta_ht_cap(sband, elems.ht_cap_elem, &sta->sta.ht_cap); - ieee80211_ht_info_ie_to_ht_bss_info( - elems.ht_info_elem, &bss_info); - ieee80211_handle_ht(local, &sta->sta.ht_cap, &bss_info); - } + + ap_ht_cap_flags = sta->sta.ht_cap.cap; rate_control_rate_init(sta); @@ -1353,11 +1344,16 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, } else rcu_read_unlock(); + if (elems.ht_info_elem && elems.wmm_param && + (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) + changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem, + ap_ht_cap_flags); + /* set AID and assoc capability, * ieee80211_set_associated() will tell the driver */ bss_conf->aid = aid; bss_conf->assoc_capability = capab_info; - ieee80211_set_associated(sdata, ifsta); + ieee80211_set_associated(sdata, ifsta, changed); ieee80211_associated(sdata, ifsta); } @@ -1657,7 +1653,6 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, size_t baselen; struct ieee802_11_elems elems; struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; u32 changed = 0; bool erp_valid; u8 erp_value = 0; @@ -1693,14 +1688,31 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, le16_to_cpu(mgmt->u.beacon.capab_info), erp_valid, erp_value); - if (elems.ht_cap_elem && elems.ht_info_elem && - elems.wmm_param && conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) { - struct ieee80211_ht_bss_info bss_info; - ieee80211_ht_info_ie_to_ht_bss_info( - elems.ht_info_elem, &bss_info); - changed |= ieee80211_handle_ht(local, &conf->ht_cap, - &bss_info); + if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param) { + struct sta_info *sta; + struct ieee80211_supported_band *sband; + u16 ap_ht_cap_flags; + + rcu_read_lock(); + + sta = sta_info_get(local, ifsta->bssid); + if (!sta) { + rcu_read_unlock(); + return; + } + + sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + + ieee80211_ht_cap_ie_to_sta_ht_cap(sband, + elems.ht_cap_elem, &sta->sta.ht_cap); + + ap_ht_cap_flags = sta->sta.ht_cap.cap; + + rcu_read_unlock(); + + changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem, + ap_ht_cap_flags); } ieee80211_bss_info_change_notify(sdata, changed); -- GitLab