提交 ae251e6b 编写于 作者: J Jean-François Moine 提交者: Mauro Carvalho Chehab

[media] gspca - pac7302: Cleanup source

- copyright change
- use the kbuild module name for messages
- change module author
- remove '__' from the variable types
- use u8 instead of 'unsigned char'
- simplify the error messages
- remove useless initialization
- remove useless traces
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 dd32f981
/*
* Pixart PAC7302 library
* Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
* Pixart PAC7302 driver
*
* V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
* Copyright (C) 2008-2012 Jean-Francois Moine <http://moinejf.free.fr>
* Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
*
* Separated from Pixart PAC7311 library by Márton Németh
* Camera button input handling by Márton Németh <nm127@freemail.hu>
......@@ -63,13 +63,12 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define MODULE_NAME "pac7302"
#include <linux/input.h>
#include <media/v4l2-chip-ident.h>
#include "gspca.h"
MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
"Thomas Kaiser thomas@kaiser-linux.li");
MODULE_DESCRIPTION("Pixart PAC7302");
MODULE_LICENSE("GPL");
......@@ -290,21 +289,21 @@ static const struct v4l2_pix_format vga_mode[] = {
.bytesperline = 640,
.sizeimage = 640 * 480 * 3 / 8 + 590,
.colorspace = V4L2_COLORSPACE_JPEG,
.priv = 0},
},
};
#define LOAD_PAGE3 255
#define END_OF_SEQUENCE 0
/* pac 7302 */
static const __u8 init_7302[] = {
static const u8 init_7302[] = {
/* index,value */
0xff, 0x01, /* page 1 */
0x78, 0x00, /* deactivate */
0xff, 0x01,
0x78, 0x40, /* led off */
};
static const __u8 start_7302[] = {
static const u8 start_7302[] = {
/* index, len, [value]* */
0xff, 1, 0x00, /* page 0 */
0x00, 12, 0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
......@@ -370,7 +369,7 @@ static const __u8 start_7302[] = {
#define SKIP 0xaa
/* page 3 - the value SKIP says skip the index - see reg_w_page() */
static const __u8 page3_7302[] = {
static const u8 page3_7302[] = {
0x90, 0x40, 0x03, 0x00, 0xc0, 0x01, 0x14, 0x16,
0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
......@@ -394,7 +393,7 @@ static const __u8 page3_7302[] = {
};
static void reg_w_buf(struct gspca_dev *gspca_dev,
__u8 index,
u8 index,
const u8 *buffer, int len)
{
int ret;
......@@ -410,7 +409,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
index, gspca_dev->usb_buf, len,
500);
if (ret < 0) {
pr_err("reg_w_buf failed index 0x%02x, error %d\n",
pr_err("reg_w_buf failed i: %02x error %d\n",
index, ret);
gspca_dev->usb_err = ret;
}
......@@ -418,8 +417,8 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
static void reg_w(struct gspca_dev *gspca_dev,
__u8 index,
__u8 value)
u8 index,
u8 value)
{
int ret;
......@@ -433,14 +432,14 @@ static void reg_w(struct gspca_dev *gspca_dev,
0, index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
pr_err("reg_w() failed index 0x%02x, value 0x%02x, error %d\n",
pr_err("reg_w() failed i: %02x v: %02x error %d\n",
index, value, ret);
gspca_dev->usb_err = ret;
}
}
static void reg_w_seq(struct gspca_dev *gspca_dev,
const __u8 *seq, int len)
const u8 *seq, int len)
{
while (--len >= 0) {
reg_w(gspca_dev, seq[0], seq[1]);
......@@ -450,7 +449,7 @@ static void reg_w_seq(struct gspca_dev *gspca_dev,
/* load the beginning of a page */
static void reg_w_page(struct gspca_dev *gspca_dev,
const __u8 *page, int len)
const u8 *page, int len)
{
int index;
int ret = 0;
......@@ -468,7 +467,7 @@ static void reg_w_page(struct gspca_dev *gspca_dev,
0, index, gspca_dev->usb_buf, 1,
500);
if (ret < 0) {
pr_err("reg_w_page() failed index 0x%02x, value 0x%02x, error %d\n",
pr_err("reg_w_page() failed i: %02x v: %02x error %d\n",
index, page[index], ret);
gspca_dev->usb_err = ret;
break;
......@@ -478,8 +477,8 @@ static void reg_w_page(struct gspca_dev *gspca_dev,
/* output a variable sequence */
static void reg_w_var(struct gspca_dev *gspca_dev,
const __u8 *seq,
const __u8 *page3, unsigned int page3_len)
const u8 *seq,
const u8 *page3, unsigned int page3_len)
{
int index, len;
......@@ -493,11 +492,13 @@ static void reg_w_var(struct gspca_dev *gspca_dev,
reg_w_page(gspca_dev, page3, page3_len);
break;
default:
#ifdef GSPCA_DEBUG
if (len > USB_BUF_SZ) {
PDEBUG(D_ERR|D_STREAM,
"Incorrect variable sequence");
return;
}
#endif
while (len > 0) {
if (len < 8) {
reg_w_buf(gspca_dev,
......@@ -524,7 +525,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam = &gspca_dev->cam;
PDEBUG(D_CONF, "Find Sensor PAC7302");
cam->cam_mode = vga_mode; /* only 640x480 */
cam->nmodes = ARRAY_SIZE(vga_mode);
......@@ -548,10 +548,10 @@ static void setbrightcont(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
int i, v;
static const __u8 max[10] =
static const u8 max[10] =
{0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
0xd4, 0xec};
static const __u8 delta[10] =
static const u8 delta[10] =
{0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
0x11, 0x0b};
......@@ -589,7 +589,6 @@ static void setcolors(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
}
reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
}
static void setwhitebalance(struct gspca_dev *gspca_dev)
......@@ -600,7 +599,6 @@ static void setwhitebalance(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0xc6, sd->white_balance);
reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "white_balance: %i", sd->white_balance);
}
static void setredbalance(struct gspca_dev *gspca_dev)
......@@ -611,7 +609,6 @@ static void setredbalance(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0xc5, sd->red_balance);
reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "red_balance: %i", sd->red_balance);
}
static void setbluebalance(struct gspca_dev *gspca_dev)
......@@ -622,7 +619,6 @@ static void setbluebalance(struct gspca_dev *gspca_dev)
reg_w(gspca_dev, 0xc7, sd->blue_balance);
reg_w(gspca_dev, 0xdc, 0x01);
PDEBUG(D_CONF|D_STREAM, "blue_balance: %i", sd->blue_balance);
}
static void setgain(struct gspca_dev *gspca_dev)
......@@ -639,8 +635,8 @@ static void setgain(struct gspca_dev *gspca_dev)
static void setexposure(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
__u8 clockdiv;
__u16 exposure;
u8 clockdiv;
u16 exposure;
/* register 2 of frame 3 contains the clock divider configuring the
no fps according to the formula: 90 / reg. sd->exposure is the
......@@ -708,8 +704,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *sd = (struct sd *) gspca_dev;
sd->sof_read = 0;
reg_w_var(gspca_dev, start_7302,
page3_7302, sizeof(page3_7302));
setbrightcont(gspca_dev);
......@@ -827,7 +821,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
{
struct sd *sd = (struct sd *) gspca_dev;
u8 *image;
unsigned char *sof;
u8 *sof;
sof = pac_find_sof(&sd->sof_read, data, len);
if (sof) {
......@@ -1090,8 +1084,8 @@ static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
struct v4l2_dbg_register *reg)
{
__u8 index;
__u8 value;
u8 index;
u8 value;
/* reg->reg: bit0..15: reserved for register index (wIndex is 16bit
long on the USB bus)
......@@ -1103,8 +1097,8 @@ static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
) {
/* Currently writing to page 0 is only supported. */
/* reg_w() only supports 8bit index */
index = reg->reg & 0x000000ff;
value = reg->val & 0x000000ff;
index = reg->reg;
value = reg->val;
/* Note that there shall be no access to other page
by any other function between the page swith and
......@@ -1165,7 +1159,7 @@ static int sd_int_pkt_scan(struct gspca_dev *gspca_dev,
/* sub-driver description for pac7302 */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.name = KBUILD_MODNAME,
.ctrls = sd_ctrls,
.nctrls = ARRAY_SIZE(sd_ctrls),
.config = sd_config,
......@@ -1212,7 +1206,7 @@ static int sd_probe(struct usb_interface *intf,
}
static struct usb_driver sd_driver = {
.name = MODULE_NAME,
.name = KBUILD_MODNAME,
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册