提交 ae1e5355 编写于 作者: S Stefan Richter

firewire: deadline for PHY config transmission

If the low-level driver failed to initialize a card properly without
noticing it, fw-core was blocked indefinitely when trying to send a
PHY config packet.  This hung up the events kernel thread, e.g. locked
up keyboard input.
https://bugzilla.redhat.com/show_bug.cgi?id=444694
https://bugzilla.redhat.com/show_bug.cgi?id=446763

This problem was introduced between 2.6.25 and 2.6.26-rc1 by commit
2a0a2590 "firewire: wait until PHY
configuration packet was transmitted (fix bus reset loop)".

The solution is to wait with timeout.  I tested it with 7 different
working controllers and 1 non-working controller.  On the working ones,
the packet callback complete()s usually --- but not always --- before a
timeout of 10ms.  Hence I chose a safer timeout of 100ms.

On the few tests with the non-working controller ALi M5271, PHY config
packet transmission always timed out so far.  (Fw-ohci needs to be fixed
for this controller independently of this deadline fix.  Often the core
doesn't even attempt to send a phy config because not even self ID
reception works.)
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
上级 161b96e7
......@@ -20,6 +20,7 @@
#include <linux/completion.h>
#include <linux/kernel.h>
#include <linux/kref.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
......@@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request);
struct fw_phy_packet {
struct fw_packet packet;
struct completion done;
struct kref kref;
};
static void
transmit_phy_packet_callback(struct fw_packet *packet,
struct fw_card *card, int status)
static void phy_packet_release(struct kref *kref)
{
struct fw_phy_packet *p =
container_of(kref, struct fw_phy_packet, kref);
kfree(p);
}
static void transmit_phy_packet_callback(struct fw_packet *packet,
struct fw_card *card, int status)
{
struct fw_phy_packet *p =
container_of(packet, struct fw_phy_packet, packet);
complete(&p->done);
kref_put(&p->kref, phy_packet_release);
}
void fw_send_phy_config(struct fw_card *card,
int node_id, int generation, int gap_count)
{
struct fw_phy_packet p;
struct fw_phy_packet *p;
long timeout = DIV_ROUND_UP(HZ, 10);
u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) |
PHY_CONFIG_ROOT_ID(node_id) |
PHY_CONFIG_GAP_COUNT(gap_count);
p.packet.header[0] = data;
p.packet.header[1] = ~data;
p.packet.header_length = 8;
p.packet.payload_length = 0;
p.packet.speed = SCODE_100;
p.packet.generation = generation;
p.packet.callback = transmit_phy_packet_callback;
init_completion(&p.done);
card->driver->send_request(card, &p.packet);
wait_for_completion(&p.done);
p = kmalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL)
return;
p->packet.header[0] = data;
p->packet.header[1] = ~data;
p->packet.header_length = 8;
p->packet.payload_length = 0;
p->packet.speed = SCODE_100;
p->packet.generation = generation;
p->packet.callback = transmit_phy_packet_callback;
init_completion(&p->done);
kref_set(&p->kref, 2);
card->driver->send_request(card, &p->packet);
timeout = wait_for_completion_timeout(&p->done, timeout);
kref_put(&p->kref, phy_packet_release);
/* will leak p if the callback is never executed */
WARN_ON(timeout == 0);
}
void fw_flush_transactions(struct fw_card *card)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册