Input: docs - freshen up introduction

Stop saying that API is experimental and that only USB is supported,
acknowledge that evdev is the preferred interface, and remove paragraph
encouraging people sending snail mail to Vojtech :) along with his email.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Documentation/input/event-codes.rst

+.. _input-event-codes:
+
 =================
 Input event codes
 =================

Documentation/input/input.rst

 .. include:: <isonum.txt>
 
-===================
-Linux Input drivers
-===================
+============
+Introduction
+============
 
 :Copyright: |copy| 1999-2001 Vojtech Pavlik <vojtech@ucw.cz> - Sponsored by SuSE
 
-Should you need to contact me, the author, you can do so either by e-mail
-- mail your message to <vojtech@ucw.cz>, or by paper mail: Vojtech Pavlik,
-Simunkova 1594, Prague 8, 182 00 Czech Republic
-
-Introduction
+Architecture
 ============
 
-This is a collection of drivers that is designed to support all input
-devices under Linux. While it is currently used only on for USB input
-devices, future use (say 2.5/2.6) is expected to expand to replace
-most of the existing input system, which is why it lives in
-drivers/input/ instead of drivers/usb/.
+Input subsystem  a collection of drivers that is designed to support
+all input devices under Linux. Most of the drivers reside in
+drivers/input, although quite a few live in drivers/hid and
+drivers/platform.
 
-The centre of the input drivers is the input module, which must be
+The core of the input subsystem is the input module, which must be
 loaded before any other of the input modules - it serves as a way of
 communication between two groups of modules:
 
@@ -32,9 +27,9 @@ events (keystrokes, mouse movements) to the input module.
 Event handlers
 --------------
 
-These modules get events from input and pass them where needed via
-various interfaces - keystrokes to the kernel, mouse movements via a
-simulated PS/2 interface to GPM and X and so on.
+These modules get events from input core and pass them where needed
+via various interfaces - keystrokes to the kernel, mouse movements via
+a simulated PS/2 interface to GPM and X, and so on.
 
 Simple Usage
 ============
@@ -45,19 +40,18 @@ kernel)::
 
 	input
 	mousedev
-	keybdev
 	usbcore
 	uhci_hcd or ohci_hcd or ehci_hcd
 	usbhid
+	hid_generic
 
 After this, the USB keyboard will work straight away, and the USB mouse
 will be available as a character device on major 13, minor 63::
 
 	crw-r--r--   1 root     root      13,  63 Mar 28 22:45 mice
 
-This device has to be created.
-
-The commands to create it by hand are::
+This device usually created automatically by the system. The commands
+to create it by hand are::
 
 	cd /dev
 	mkdir input
@@ -81,100 +75,50 @@ When you do all of the above, you can use your USB mouse and keyboard.
 Detailed Description
 ====================
 
-Device drivers
+Event handlers
 --------------
 
-Device drivers are the modules that generate events. The events are
-however not useful without being handled, so you also will need to use some
-of the modules from section 3.2.
-
-usbhid
-~~~~~~
-
-usbhid is the largest and most complex driver of the whole suite. It
-handles all HID devices, and because there is a very wide variety of them,
-and because the USB HID specification isn't simple, it needs to be this big.
-
-Currently, it handles USB mice, joysticks, gamepads, steering wheels
-keyboards, trackballs and digitizers.
-
-However, USB uses HID also for monitor controls, speaker controls, UPSs,
-LCDs and many other purposes.
-
-The monitor and speaker controls should be easy to add to the hid/input
-interface, but for the UPSs and LCDs it doesn't make much sense. For this,
-the hiddev interface was designed. See Documentation/hid/hiddev.txt
-for more information about it.
-
-The usage of the usbhid module is very simple, it takes no parameters,
-detects everything automatically and when a HID device is inserted, it
-detects it appropriately.
-
-However, because the devices vary wildly, you might happen to have a
-device that doesn't work well. In that case #define DEBUG at the beginning
-of hid-core.c and send me the syslog traces.
+Event handlers distribute the events from the devices to userspace and
+in-kernel consumers, as needed.
 
-usbmouse
-~~~~~~~~
-
-For embedded systems, for mice with broken HID descriptors and just any
-other use when the big usbhid wouldn't be a good choice, there is the
-usbmouse driver. It handles USB mice only. It uses a simpler HIDBP
-protocol. This also means the mice must support this simpler protocol. Not
-all do. If you don't have any strong reason to use this module, use usbhid
-instead.
-
-usbkbd
-~~~~~~
-
-Much like usbmouse, this module talks to keyboards with a simplified
-HIDBP protocol. It's smaller, but doesn't support any extra special keys.
-Use usbhid instead if there isn't any special reason to use this.
-
-wacom
+evdev
 ~~~~~
 
-This is a driver for Wacom Graphire and Intuos tablets. Not for Wacom
-PenPartner, that one is handled by the HID driver. Although the Intuos and
-Graphire tablets claim that they are HID tablets as well, they are not and
-thus need this specific driver.
+``evdev`` is the generic input event interface. It passes the events
+generated in the kernel straight to the program, with timestamps. The
+event codes are the same on all architectures and are hardware
+independent.
 
-iforce
-~~~~~~
+This is the preferred interface for userspace to consume user
+input, and all clients are encouraged to use it.
 
-A driver for I-Force joysticks and wheels, both over USB and RS232.
-It includes ForceFeedback support now, even though Immersion
-Corp. considers the protocol a trade secret and won't disclose a word
-about it.
+See :ref:`event-interface` for notes on API.
 
-Event handlers
---------------
+The devices are in /dev/input::
 
-Event handlers distribute the events from the devices to userland and
-kernel, as needed.
+	crw-r--r--   1 root     root      13,  64 Apr  1 10:49 event0
+	crw-r--r--   1 root     root      13,  65 Apr  1 10:50 event1
+	crw-r--r--   1 root     root      13,  66 Apr  1 10:50 event2
+	crw-r--r--   1 root     root      13,  67 Apr  1 10:50 event3
+	...
 
-keybdev
-~~~~~~~
+There are two ranges of minors: 64 through 95 is the static legacy
+range. If there are more than 32 input devices in a system, additional
+evdev nodes are created with minors starting with 256.
 
-keybdev is currently a rather ugly hack that translates the input
-events into architecture-specific keyboard raw mode (Xlated AT Set2 on
-x86), and passes them into the handle_scancode function of the
-keyboard.c module. This works well enough on all architectures that
-keybdev can generate rawmode on, other architectures can be added to
-it.
+keyboard
+~~~~~~~~
 
-The right way would be to pass the events to keyboard.c directly,
-best if keyboard.c would itself be an event handler. This is done in
-the input patch, available on the webpage mentioned below.
+``keyboard`` is in-kernel input handler ad is a part of VT code. It
+consumes keyboard keystrokes and handles user input for VT consoles.
 
 mousedev
 ~~~~~~~~
 
-mousedev is also a hack to make programs that use mouse input
+``mousedev`` is a hack to make legacy programs that use mouse input
 work. It takes events from either mice or digitizers/tablets and makes
 a PS/2-style (a la /dev/psaux) mouse device available to the
-userland. Ideally, the programs could use a more reasonable interface,
-for example evdev
+userland.
 
 Mousedev devices in /dev/input (as shown above) are::
 
@@ -190,8 +134,9 @@ Mousedev devices in /dev/input (as shown above) are::
 Each ``mouse`` device is assigned to a single mouse or digitizer, except
 the last one - ``mice``. This single character device is shared by all
 mice and digitizers, and even if none are connected, the device is
-present.  This is useful for hotplugging USB mice, so that programs
-can open the device even when no mice are present.
+present.  This is useful for hotplugging USB mice, so that older programs
+that do not handle hotplug can open the device even when no mice are
+present.
 
 CONFIG_INPUT_MOUSEDEV_SCREEN_[XY] in the kernel configuration are
 the size of your screen (in pixels) in XFree86. This is needed if you
@@ -208,11 +153,10 @@ mouse and ExplorerPS/2 if you want to use extra (up to 5) buttons.
 joydev
 ~~~~~~
 
-Joydev implements v0.x and v1.x Linux joystick api, much like
-drivers/char/joystick/joystick.c used to in earlier versions. See
-joystick-api.txt in the Documentation subdirectory for details.  As
-soon as any joystick is connected, it can be accessed in /dev/input
-on::
+``joydev`` implements v0.x and v1.x Linux joystick API. See
+:ref:`joystick-api` for details.
+
+As soon as any joystick is connected, it can be accessed in /dev/input on::
 
 	crw-r--r--   1 root     root      13,   0 Apr  1 10:50 js0
 	crw-r--r--   1 root     root      13,   1 Apr  1 10:50 js1
@@ -220,56 +164,99 @@ on::
 	crw-r--r--   1 root     root      13,   3 Apr  1 10:50 js3
 	...
 
-And so on up to js31.
+And so on up to js31 in legacy range, and additional nodes with minors
+above 256 if there are more joystick devices.
 
-evdev
-~~~~~
+Device drivers
+--------------
 
-evdev is the generic input event interface. It passes the events
-generated in the kernel straight to the program, with timestamps. The
-API is still evolving, but should be usable now. It's described in
-section 5.
+Device drivers are the modules that generate events.
 
-This should be the way for GPM and X to get keyboard and mouse
-events. It allows for multihead in X without any specific multihead
-kernel support. The event codes are the same on all architectures and
-are hardware independent.
+hid-generic
+~~~~~~~~~~~
 
-The devices are in /dev/input::
+``hid-generic`` is one of the largest and most complex driver of the
+whole suite. It handles all HID devices, and because there is a very
+wide variety of them, and because the USB HID specification isn't
+simple, it needs to be this big.
 
-	crw-r--r--   1 root     root      13,  64 Apr  1 10:49 event0
-	crw-r--r--   1 root     root      13,  65 Apr  1 10:50 event1
-	crw-r--r--   1 root     root      13,  66 Apr  1 10:50 event2
-	crw-r--r--   1 root     root      13,  67 Apr  1 10:50 event3
-	...
+Currently, it handles USB mice, joysticks, gamepads, steering wheels
+keyboards, trackballs and digitizers.
+
+However, USB uses HID also for monitor controls, speaker controls, UPSs,
+LCDs and many other purposes.
+
+The monitor and speaker controls should be easy to add to the hid/input
+interface, but for the UPSs and LCDs it doesn't make much sense. For this,
+the hiddev interface was designed. See Documentation/hid/hiddev.txt
+for more information about it.
+
+The usage of the usbhid module is very simple, it takes no parameters,
+detects everything automatically and when a HID device is inserted, it
+detects it appropriately.
 
-And so on up to event31.
+However, because the devices vary wildly, you might happen to have a
+device that doesn't work well. In that case #define DEBUG at the beginning
+of hid-core.c and send me the syslog traces.
+
+usbmouse
+~~~~~~~~
+
+For embedded systems, for mice with broken HID descriptors and just any
+other use when the big usbhid wouldn't be a good choice, there is the
+usbmouse driver. It handles USB mice only. It uses a simpler HIDBP
+protocol. This also means the mice must support this simpler protocol. Not
+all do. If you don't have any strong reason to use this module, use usbhid
+instead.
+
+usbkbd
+~~~~~~
+
+Much like usbmouse, this module talks to keyboards with a simplified
+HIDBP protocol. It's smaller, but doesn't support any extra special keys.
+Use usbhid instead if there isn't any special reason to use this.
+
+psmouse
+~~~~~~~
+
+This is driver for all flavors of pointing devices using PS/2
+protocol, including Synaptics and ALPS touchpads, Intellimouse
+Explorer devices, Logitech PS/2 mice and so on.
+
+atkbd
+~~~~~
+
+This is driver for PS/2 (AT) keyboards.
+
+iforce
+~~~~~~
+
+A driver for I-Force joysticks and wheels, both over USB and RS232.
+It includes Force Feedback support now, even though Immersion
+Corp. considers the protocol a trade secret and won't disclose a word
+about it.
 
 Verifying if it works
 =====================
 
 Typing a couple keys on the keyboard should be enough to check that
-a USB keyboard works and is correctly connected to the kernel keyboard
+a keyboard works and is correctly connected to the kernel keyboard
 driver.
 
 Doing a ``cat /dev/input/mouse0`` (c, 13, 32) will verify that a mouse
 is also emulated; characters should appear if you move it.
 
 You can test the joystick emulation with the ``jstest`` utility,
-available in the joystick package (see Documentation/input/joystick.txt).
+available in the joystick package (see :ref:`joystick-doc`).
 
-You can test the event devices with the ``evtest`` utility available
-in the LinuxConsole project CVS archive (see the URL below).
+You can test the event devices with the ``evtest`` utility.
+
+.. _event-interface:
 
 Event interface
 ===============
 
-Should you want to add event device support into any application (X, gpm,
-svgalib ...) I <vojtech@ucw.cz> will be happy to provide you any help I
-can. Here goes a description of the current state of things, which is going
-to be extended, but not changed incompatibly as time goes:
-
-You can use blocking and nonblocking reads, also select() on the
+You can use blocking and nonblocking reads, and also select() on the
 /dev/input/eventX devices, and you'll always get a whole number of input
 events on a read. Their layout is::
 
@@ -290,3 +277,5 @@ list is in include/uapi/linux/input-event-codes.h.
 ``value`` is the value the event carries. Either a relative change for
 EV_REL, absolute new value for EV_ABS (joysticks ...), or 0 for EV_KEY for
 release, 1 for keypress and 2 for autorepeat.
+
+See :ref:`input-event-codes` for more information about various even codes.

Documentation/input/joydev/joystick-api.rst

+.. _joystick-api:
+
 =====================
 Programming Interface
 =====================

Documentation/input/joydev/joystick.rst

 .. include:: <isonum.txt>
 
+.. _joystick-doc:
+
 Introduction
 ============