Merge branch 'wireless-2.6' into wireless-next-2.6

Patch "iwlwifi: work around passive scan issue" was merged into
wireless-2.6, but touched a lot of code since modified (and moved)
in wireless-next-2.6. This caused some conflicts.

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-scan.c
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>

drivers/net/wireless/iwlwifi/iwl-agn-lib.c

@@ -1395,16 +1395,29 @@ void iwlagn_request_scan(struct iwl_priv *priv)
 			rate = IWL_RATE_1M_PLCP;
 			rate_flags = RATE_MCS_CCK_MSK;
 		}
-		scan->good_CRC_th = 0;
+		scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED;
 		break;
 	case IEEE80211_BAND_5GHZ:
 		rate = IWL_RATE_6M_PLCP;
 		/*
-		 * If active scaning is requested but a certain channel
-		 * is marked passive, we can do active scanning if we
-		 * detect transmissions.
+		 * If active scanning is requested but a certain channel is
+		 * marked passive, we can do active scanning if we detect
+		 * transmissions.
+		 *
+		 * There is an issue with some firmware versions that triggers
+		 * a sysassert on a "good CRC threshold" of zero (== disabled),
+		 * on a radar channel even though this means that we should NOT
+		 * send probes.
+		 *
+		 * The "good CRC threshold" is the number of frames that we
+		 * need to receive during our dwell time on a channel before
+		 * sending out probes -- setting this to a huge value will
+		 * mean we never reach it, but at the same time work around
+		 * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
+		 * here instead of IWL_GOOD_CRC_TH_DISABLED.
 		 */
-		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_NEVER;
 		break;
 	default:
 		IWL_WARN(priv, "Invalid scan band count\n");

drivers/net/wireless/iwlwifi/iwl-commands.h

@@ -2663,7 +2663,9 @@ struct iwl_ssid_ie {
 #define PROBE_OPTION_MAX_3945		4
 #define PROBE_OPTION_MAX		20
 #define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
-#define IWL_GOOD_CRC_TH			cpu_to_le16(1)
+#define IWL_GOOD_CRC_TH_DISABLED	0
+#define IWL_GOOD_CRC_TH_DEFAULT		cpu_to_le16(1)
+#define IWL_GOOD_CRC_TH_NEVER		cpu_to_le16(0xffff)
 #define IWL_MAX_SCAN_SIZE 1024
 #define IWL_MAX_CMD_SIZE 4096
 #define IWL_MAX_PROBE_REQUEST		200

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -2938,7 +2938,8 @@ void iwl3945_request_scan(struct iwl_priv *priv)
 		 * is marked passive, we can do active scanning if we
 		 * detect transmissions.
 		 */
-		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
+		scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
+						IWL_GOOD_CRC_TH_DISABLED;
 		band = IEEE80211_BAND_5GHZ;
 		break;
 	default:

drivers/net/wireless/p54/p54pci.c

@@ -245,7 +245,7 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 	u32 idx, i;
 
 	i = (*index) % ring_limit;
-	(*index) = idx = le32_to_cpu(ring_control->device_idx[1]);
+	(*index) = idx = le32_to_cpu(ring_control->device_idx[ring_index]);
 	idx %= ring_limit;
 
 	while (i != idx) {

net/mac80211/agg-tx.c

@@ -183,7 +183,6 @@ static void sta_addba_resp_timer_expired(unsigned long data)
 		       HT_AGG_STATE_REQ_STOP_BA_MSK)) !=
 						HT_ADDBA_REQUESTED_MSK) {
 		spin_unlock_bh(&sta->lock);
-		*state = HT_AGG_STATE_IDLE;
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		printk(KERN_DEBUG "timer expired on tid %d but we are not "
 				"(or no longer) expecting addBA response there\n",

net/mac80211/mlme.c

@@ -174,6 +174,8 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
 	ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
 		     channel_type != local->hw.conf.channel_type;
 
+	if (local->tmp_channel)
+		local->tmp_channel_type = channel_type;
 	local->oper_channel_type = channel_type;
 
 	if (ht_changed) {