From ac84d6cc182971079df846c7814fbc5fd7b7e0f8 Mon Sep 17 00:00:00 2001 From: Dmitry Lifshitz Date: Wed, 17 Sep 2014 15:10:06 +0300 Subject: [PATCH] ARM: dts: cm-t54: add Startek LCD support Add DT support for Startek KD050C LCD 800x480 panel. Signed-off-by: Dmitry Lifshitz Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-cm-t54.dts | 44 ++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index a3faca98a8e7..7323b7078cdd 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -19,6 +19,7 @@ aliases { display0 = &hdmi0; display1 = &dvi0; + display2 = &lcd0; }; vmmcsd_fixed: fixed-regulator-mmcsd { @@ -72,6 +73,38 @@ }; }; + lcd0: display { + compatible = "startek,startek-kd050c", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <33000000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <43>; + vback-porch = <29>; + vfront-porch = <13>; + vsync-len = <3>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_lcd_out>; + }; + }; + }; + hdmi0: connector@0 { compatible = "hdmi-connector"; label = "hdmi"; @@ -223,6 +256,12 @@ >; }; + lcd_pins: pinmux_lcd_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */ + >; + }; + hdmi_conn_pins: pinmux_hdmi_conn_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ @@ -547,6 +586,11 @@ remote-endpoint = <&tfp410_in>; data-lines = <24>; }; + + dpi_lcd_out: endpoint@1 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; }; }; -- GitLab