提交 aacf0941 编写于 作者: R Rajendra Nayak 提交者: Tony Lindgren

ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init

An hwmod with a 'HWMOD_INIT_NO_IDLE' flag set, is left in
enabled state by the hwmod framework post the initial setup.
Once a real user of the device (a driver) tries to enable it
at a later point, the hwmod framework throws a WARN() about
the device being already in enabled state.

Fix this by introducing a new internal flag '_HWMOD_SKIP_ENABLE' to
identify such devices/hwmods. When the device/hwmod is requested to be
enabled (the first time) by its driver/user, nothing except the
mux-enable is needed. The mux data is board specific and is
unavailable during initial enable() of the device, done by the
framework as part of setup().

A good example of a such a device is an UART used as debug console.
The UART module needs to be kept enabled through the boot, until the
UART driver takes control of it, for debug prints to appear on
the console.
Acked-by: NKevin Hilman <khilman@ti.com>
Acked-by: NBenoit Cousson <b-cousson@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: use a flag rather than a state; updated commit message;
 edited some documentation]
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 4c89aad9
...@@ -1441,6 +1441,25 @@ static int _enable(struct omap_hwmod *oh) ...@@ -1441,6 +1441,25 @@ static int _enable(struct omap_hwmod *oh)
pr_debug("omap_hwmod: %s: enabling\n", oh->name); pr_debug("omap_hwmod: %s: enabling\n", oh->name);
/*
* hwmods with HWMOD_INIT_NO_IDLE flag set are left
* in enabled state at init.
* Now that someone is really trying to enable them,
* just ensure that the hwmod mux is set.
*/
if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
/*
* If the caller has mux data populated, do the mux'ing
* which wouldn't have been done as part of the _enable()
* done during setup.
*/
if (oh->mux)
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
return 0;
}
if (oh->_state != _HWMOD_STATE_INITIALIZED && if (oh->_state != _HWMOD_STATE_INITIALIZED &&
oh->_state != _HWMOD_STATE_IDLE && oh->_state != _HWMOD_STATE_IDLE &&
oh->_state != _HWMOD_STATE_DISABLED) { oh->_state != _HWMOD_STATE_DISABLED) {
...@@ -1744,8 +1763,10 @@ static int _setup(struct omap_hwmod *oh, void *data) ...@@ -1744,8 +1763,10 @@ static int _setup(struct omap_hwmod *oh, void *data)
* it should be set by the core code as a runtime flag during startup * it should be set by the core code as a runtime flag during startup
*/ */
if ((oh->flags & HWMOD_INIT_NO_IDLE) && if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
(postsetup_state == _HWMOD_STATE_IDLE)) (postsetup_state == _HWMOD_STATE_IDLE)) {
oh->_int_flags |= _HWMOD_SKIP_ENABLE;
postsetup_state = _HWMOD_STATE_ENABLED; postsetup_state = _HWMOD_STATE_ENABLED;
}
if (postsetup_state == _HWMOD_STATE_IDLE) if (postsetup_state == _HWMOD_STATE_IDLE)
_idle(oh); _idle(oh);
......
...@@ -416,10 +416,13 @@ struct omap_hwmod_omap4_prcm { ...@@ -416,10 +416,13 @@ struct omap_hwmod_omap4_prcm {
* _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
* _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
* _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
* _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
* causes the first call to _enable() to only update the pinmux
*/ */
#define _HWMOD_NO_MPU_PORT (1 << 0) #define _HWMOD_NO_MPU_PORT (1 << 0)
#define _HWMOD_WAKEUP_ENABLED (1 << 1) #define _HWMOD_WAKEUP_ENABLED (1 << 1)
#define _HWMOD_SYSCONFIG_LOADED (1 << 2) #define _HWMOD_SYSCONFIG_LOADED (1 << 2)
#define _HWMOD_SKIP_ENABLE (1 << 3)
/* /*
* omap_hwmod._state definitions * omap_hwmod._state definitions
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册