From a9cad3d4f046bbd8f096b78d220c8d7074c2e93f Mon Sep 17 00:00:00 2001 From: Vikas Shivappa Date: Fri, 7 Apr 2017 17:33:50 -0700 Subject: [PATCH] Documentation, x86: Intel Memory bandwidth allocation Update the 'intel_rdt_ui' documentation to have Memory bandwidth(b/w) allocation interface usage. Signed-off-by: Vikas Shivappa Cc: ravi.v.shankar@intel.com Cc: tony.luck@intel.com Cc: fenghua.yu@intel.com Cc: vikas.shivappa@intel.com Link: http://lkml.kernel.org/r/1491611637-20417-2-git-send-email-vikas.shivappa@linux.intel.com Signed-off-by: Thomas Gleixner --- Documentation/x86/intel_rdt_ui.txt | 107 +++++++++++++++++++++++------ 1 file changed, 87 insertions(+), 20 deletions(-) diff --git a/Documentation/x86/intel_rdt_ui.txt b/Documentation/x86/intel_rdt_ui.txt index a1ace91c4b86..0f6d8477b66c 100644 --- a/Documentation/x86/intel_rdt_ui.txt +++ b/Documentation/x86/intel_rdt_ui.txt @@ -4,6 +4,7 @@ Copyright (C) 2016 Intel Corporation Fenghua Yu Tony Luck +Vikas Shivappa This feature is enabled by the CONFIG_INTEL_RDT_A Kconfig and the X86 /proc/cpuinfo flag bits "rdt", "cat_l3" and "cdp_l3". @@ -22,19 +23,34 @@ Info directory The 'info' directory contains information about the enabled resources. Each resource has its own subdirectory. The subdirectory -names reflect the resource names. Each subdirectory contains the -following files: +names reflect the resource names. +Cache resource(L3/L2) subdirectory contains the following files: -"num_closids": The number of CLOSIDs which are valid for this - resource. The kernel uses the smallest number of - CLOSIDs of all enabled resources as limit. +"num_closids": The number of CLOSIDs which are valid for this + resource. The kernel uses the smallest number of + CLOSIDs of all enabled resources as limit. -"cbm_mask": The bitmask which is valid for this resource. This - mask is equivalent to 100%. +"cbm_mask": The bitmask which is valid for this resource. + This mask is equivalent to 100%. -"min_cbm_bits": The minimum number of consecutive bits which must be - set when writing a mask. +"min_cbm_bits": The minimum number of consecutive bits which + must be set when writing a mask. +Memory bandwitdh(MB) subdirectory contains the following files: + +"min_bandwidth": The minimum memory bandwidth percentage which + user can request. + +"bandwidth_gran": The granularity in which the memory bandwidth + percentage is allocated. The allocated + b/w percentage is rounded off to the next + control step available on the hardware. The + available bandwidth control steps are: + min_bandwidth + N * bandwidth_gran. + +"delay_linear": Indicates if the delay scale is linear or + non-linear. This field is purely informational + only. Resource groups --------------- @@ -110,6 +126,22 @@ and 0xA are not. On a system with a 20-bit mask each bit represents 5% of the capacity of the cache. You could partition the cache into four equal parts with masks: 0x1f, 0x3e0, 0x7c00, 0xf8000. +Memory bandwidth(b/w) percentage +-------------------------------- +For Memory b/w resource, user controls the resource by indicating the +percentage of total memory b/w. + +The minimum bandwidth percentage value for each cpu model is predefined +and can be looked up through "info/MB/min_bandwidth". The bandwidth +granularity that is allocated is also dependent on the cpu model and can +be looked up at "info/MB/bandwidth_gran". The available bandwidth +control steps are: min_bw + N * bw_gran. Intermediate values are rounded +to the next control step available on the hardware. + +The bandwidth throttling is a core specific mechanism on some of Intel +SKUs. Using a high bandwidth and a low bandwidth setting on two threads +sharing a core will result in both threads being throttled to use the +low bandwidth. L3 details (code and data prioritization disabled) -------------------------------------------------- @@ -132,6 +164,13 @@ schemata format is always: L2:=;=;... +Memory b/w Allocation details +----------------------------- + +Memory b/w domain is L3 cache. + + MB:=bandwidth0;=bandwidth1;... + Reading/writing the schemata file --------------------------------- Reading the schemata file will show the state of all resources @@ -149,13 +188,14 @@ L3CODE:0=fffff;1=fffff;2=fffff;3=fffff Example 1 --------- On a two socket machine (one L3 cache per socket) with just four bits -for cache bit masks +for cache bit masks, minimum b/w of 10% with a memory bandwidth +granularity of 10% # mount -t resctrl resctrl /sys/fs/resctrl # cd /sys/fs/resctrl # mkdir p0 p1 -# echo "L3:0=3;1=c" > /sys/fs/resctrl/p0/schemata -# echo "L3:0=3;1=3" > /sys/fs/resctrl/p1/schemata +# echo "L3:0=3;1=c\nMB:0=50;1=50" > /sys/fs/resctrl/p0/schemata +# echo "L3:0=3;1=3\nMB:0=50;1=50" > /sys/fs/resctrl/p1/schemata The default resource group is unmodified, so we have access to all parts of all caches (its schemata file reads "L3:0=f;1=f"). @@ -164,6 +204,14 @@ Tasks that are under the control of group "p0" may only allocate from the "lower" 50% on cache ID 0, and the "upper" 50% of cache ID 1. Tasks in group "p1" use the "lower" 50% of cache on both sockets. +Similarly, tasks that are under the control of group "p0" may use a +maximum memory b/w of 50% on socket0 and 50% on socket 1. +Tasks in group "p1" may also use 50% memory b/w on both sockets. +Note that unlike cache masks, memory b/w cannot specify whether these +allocations can overlap or not. The allocations specifies the maximum +b/w that the group may be able to use and the system admin can configure +the b/w accordingly. + Example 2 --------- Again two sockets, but this time with a more realistic 20-bit mask. @@ -177,9 +225,10 @@ of L3 cache on socket 0. # cd /sys/fs/resctrl First we reset the schemata for the default group so that the "upper" -50% of the L3 cache on socket 0 cannot be used by ordinary tasks: +50% of the L3 cache on socket 0 and 50% of memory b/w cannot be used by +ordinary tasks: -# echo "L3:0=3ff;1=fffff" > schemata +# echo "L3:0=3ff;1=fffff\nMB:0=50;1=100" > schemata Next we make a resource group for our first real time task and give it access to the "top" 25% of the cache on socket 0. @@ -202,6 +251,20 @@ Ditto for the second real time task (with the remaining 25% of cache): # echo 5678 > p1/tasks # taskset -cp 2 5678 +For the same 2 socket system with memory b/w resource and CAT L3 the +schemata would look like(Assume min_bandwidth 10 and bandwidth_gran is +10): + +For our first real time task this would request 20% memory b/w on socket +0. + +# echo -e "L3:0=f8000;1=fffff\nMB:0=20;1=100" > p0/schemata + +For our second real time task this would request an other 20% memory b/w +on socket 0. + +# echo -e "L3:0=f8000;1=fffff\nMB:0=20;1=100" > p0/schemata + Example 3 --------- @@ -215,18 +278,22 @@ the tasks. # cd /sys/fs/resctrl First we reset the schemata for the default group so that the "upper" -50% of the L3 cache on socket 0 cannot be used by ordinary tasks: +50% of the L3 cache on socket 0, and 50% of memory bandwidth on socket 0 +cannot be used by ordinary tasks: -# echo "L3:0=3ff" > schemata +# echo "L3:0=3ff\nMB:0=50" > schemata -Next we make a resource group for our real time cores and give -it access to the "top" 50% of the cache on socket 0. +Next we make a resource group for our real time cores and give it access +to the "top" 50% of the cache on socket 0 and 50% of memory bandwidth on +socket 0. # mkdir p0 -# echo "L3:0=ffc00;" > p0/schemata +# echo "L3:0=ffc00\nMB:0=50" > p0/schemata Finally we move core 4-7 over to the new group and make sure that the -kernel and the tasks running there get 50% of the cache. +kernel and the tasks running there get 50% of the cache. They should +also get 50% of memory bandwidth assuming that the cores 4-7 are SMT +siblings and only the real time threads are scheduled on the cores 4-7. # echo C0 > p0/cpus -- GitLab