Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 a9ba6151 编写于 作者: M Mark Brown
浏览文件
操作

ASoC: Rename WM8915 to WM8996 

For marketing reasons the part will be called WM8996. In order to avoid
user confusion rename the driver to reflect this.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NKukjin Kim <kgene.kim@samsung.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
上级 322a8b03
展开全部 显示空白变更内容
内联 并排
Showing with 6758 addition and 3763 deletion
arch/arm/mach-s3c64xx/mach-crag6410.c
浏览文件 @ a9ba6151
......@@ -65,7 +65,7 @@
#include <plat/iic.h>
#include <plat/pm.h>
#include <sound/wm8915.h>
#include <sound/wm8996.h>
#include <sound/wm8962.h>
#include <sound/wm9081.h>
......@@ -614,7 +614,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
.disable_touch = true,
};
static struct wm8915_retune_mobile_config wm8915_retune[] = {
static struct wm8996_retune_mobile_config wm8996_retune[] = {
{
.name = "Sub LPF",
.rate = 48000,
......@@ -635,12 +635,12 @@ static struct wm8915_retune_mobile_config wm8915_retune[] = {
},
};
static struct wm8915_pdata wm8915_pdata __initdata = {
static struct wm8996_pdata wm8996_pdata __initdata = {
.ldo_ena = S3C64XX_GPN(7),
.gpio_base = CODEC_GPIO_BASE,
.micdet_def = 1,
.inl_mode = WM8915_DIFFERRENTIAL_1,
.inr_mode = WM8915_DIFFERRENTIAL_1,
.inl_mode = WM8996_DIFFERRENTIAL_1,
.inr_mode = WM8996_DIFFERRENTIAL_1,
.irq_flags = IRQF_TRIGGER_RISING,
......@@ -652,8 +652,8 @@ static struct wm8915_pdata wm8915_pdata __initdata = {
0x020e, /* GPIO5 == CLKOUT */
},
.retune_mobile_cfgs = wm8915_retune,
.num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune),
.retune_mobile_cfgs = wm8996_retune,
.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
};
static struct wm8962_pdata wm8962_pdata __initdata = {
......@@ -679,8 +679,8 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
.platform_data = &glenfarclas_pmic_pdata },
{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
{ I2C_BOARD_INFO("wm8915", 0x1a),
.platform_data = &wm8915_pdata,
{ I2C_BOARD_INFO("wm8996", 0x1a),
.platform_data = &wm8996_pdata,
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
},
{ I2C_BOARD_INFO("wm9081", 0x6c),
......
include/sound/wm8915.h → include/sound/wm8996.h
浏览文件 @ a9ba6151
/*
* linux/sound/wm8915.h -- Platform data for WM8915
* linux/sound/wm8996.h -- Platform data for WM8996
*
* Copyright 2011 Wolfson Microelectronics. PLC.
*
......@@ -8,14 +8,14 @@
* published by the Free Software Foundation.
*/
#ifndef __LINUX_SND_WM8903_H
#define __LINUX_SND_WM8903_H
#ifndef __LINUX_SND_WM8996_H
#define __LINUX_SND_WM8996_H
enum wm8915_inmode {
WM8915_DIFFERRENTIAL_1 = 0, /* IN1xP - IN1xN */
WM8915_INVERTING = 1, /* IN1xN */
WM8915_NON_INVERTING = 2, /* IN1xP */
WM8915_DIFFERENTIAL_2 = 3, /* IN2xP - IN2xP */
enum wm8996_inmode {
WM8996_DIFFERRENTIAL_1 = 0, /* IN1xP - IN1xN */
WM8996_INVERTING = 1, /* IN1xN */
WM8996_NON_INVERTING = 2, /* IN1xP */
WM8996_DIFFERENTIAL_2 = 3, /* IN2xP - IN2xP */
};
/**
......@@ -25,23 +25,23 @@ enum wm8915_inmode {
* Configurations are expected to be generated using the ReTune Mobile
* control panel in WISCE - see http://www.wolfsonmicro.com/wisce/
*/
struct wm8915_retune_mobile_config {
struct wm8996_retune_mobile_config {
const char *name;
int rate;
u16 regs[20];
};
#define WM8915_SET_DEFAULT 0x10000
#define WM8996_SET_DEFAULT 0x10000
struct wm8915_pdata {
struct wm8996_pdata {
int irq_flags; /** Set IRQ trigger flags; default active low */
int ldo_ena; /** GPIO for LDO1; -1 for none */
int micdet_def; /** Default MICDET_SRC/HP1FB_SRC/MICD_BIAS */
enum wm8915_inmode inl_mode;
enum wm8915_inmode inr_mode;
enum wm8996_inmode inl_mode;
enum wm8996_inmode inr_mode;
u32 spkmute_seq; /** Value for register 0x802 */
......@@ -49,7 +49,7 @@ struct wm8915_pdata {
u32 gpio_default[5];
int num_retune_mobile_cfgs;
struct wm8915_retune_mobile_config *retune_mobile_cfgs;
struct wm8996_retune_mobile_config *retune_mobile_cfgs;
};
#endif
sound/soc/codecs/Kconfig
浏览文件 @ a9ba6151
......@@ -78,7 +78,6 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM8900 if I2C
select SND_SOC_WM8903 if I2C
select SND_SOC_WM8904 if I2C
select SND_SOC_WM8915 if I2C
select SND_SOC_WM8940 if I2C
select SND_SOC_WM8955 if I2C
select SND_SOC_WM8960 if I2C
......@@ -95,6 +94,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM8993 if I2C
select SND_SOC_WM8994 if MFD_WM8994
select SND_SOC_WM8995 if SND_SOC_I2C_AND_SPI
select SND_SOC_WM8996 if I2C
select SND_SOC_WM9081 if I2C
select SND_SOC_WM9090 if I2C
select SND_SOC_WM9705 if SND_SOC_AC97_BUS
......@@ -329,9 +329,6 @@ config SND_SOC_WM8903
config SND_SOC_WM8904
tristate
config SND_SOC_WM8915
tristate
config SND_SOC_WM8940
tristate
......@@ -380,6 +377,9 @@ config SND_SOC_WM8994
config SND_SOC_WM8995
tristate
config SND_SOC_WM8996
tristate
config SND_SOC_WM9081
tristate
......
sound/soc/codecs/Makefile
浏览文件 @ a9ba6151
......@@ -63,7 +63,7 @@ snd-soc-wm8804-objs := wm8804.o
snd-soc-wm8900-objs := wm8900.o
snd-soc-wm8903-objs := wm8903.o
snd-soc-wm8904-objs := wm8904.o
snd-soc-wm8915-objs := wm8915.o
snd-soc-wm8996-objs := wm8996.o
snd-soc-wm8940-objs := wm8940.o
snd-soc-wm8955-objs := wm8955.o
snd-soc-wm8960-objs := wm8960.o
......@@ -160,7 +160,7 @@ obj-$(CONFIG_SND_SOC_WM8804) += snd-soc-wm8804.o
obj-$(CONFIG_SND_SOC_WM8900) += snd-soc-wm8900.o
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8904) += snd-soc-wm8904.o
obj-$(CONFIG_SND_SOC_WM8915) += snd-soc-wm8915.o
obj-$(CONFIG_SND_SOC_WM8996) += snd-soc-wm8996.o
obj-$(CONFIG_SND_SOC_WM8940) += snd-soc-wm8940.o
obj-$(CONFIG_SND_SOC_WM8955) += snd-soc-wm8955.o
obj-$(CONFIG_SND_SOC_WM8960) += snd-soc-wm8960.o
......
sound/soc/codecs/wm8915.h 已删除 100644 → 0
浏览文件 @ 322a8b03
因为 它太大了无法显示 source diff 。你可以改为 查看blob。
sound/soc/codecs/wm8996.h 0 → 100644
浏览文件 @ a9ba6151
此差异已折叠。
sound/soc/samsung/Kconfig
浏览文件 @ a9ba6151
......@@ -183,7 +183,7 @@ config SND_SOC_SPEYSIDE
tristate "Audio support for Wolfson Speyside"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410
select SND_SAMSUNG_I2S
select SND_SOC_WM8915
select SND_SOC_WM8996
select SND_SOC_WM9081
config SND_SOC_SPEYSIDE_WM8962
......
sound/soc/samsung/speyside.c
浏览文件 @ a9ba6151
......@@ -14,10 +14,10 @@
#include <sound/jack.h>
#include <linux/gpio.h>
#include "../codecs/wm8915.h"
#include "../codecs/wm8996.h"
#include "../codecs/wm9081.h"
#define WM8915_HPSEL_GPIO 214
#define WM8996_HPSEL_GPIO 214
static int speyside_set_bias_level(struct snd_soc_card *card,
struct snd_soc_dapm_context *dapm,
......@@ -31,12 +31,12 @@ static int speyside_set_bias_level(struct snd_soc_card *card,
switch (level) {
case SND_SOC_BIAS_STANDBY:
ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK2,
ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2,
32768, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK2,
ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2,
0, 0, 0);
if (ret < 0) {
pr_err("Failed to stop FLL\n");
......@@ -65,7 +65,7 @@ static int speyside_set_bias_level_post(struct snd_soc_card *card,
case SND_SOC_BIAS_PREPARE:
if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
ret = snd_soc_dai_set_pll(codec_dai, 0,
WM8915_FLL_MCLK2,
WM8996_FLL_MCLK2,
32768, 48000 * 256);
if (ret < 0) {
pr_err("Failed to start FLL\n");
......@@ -73,7 +73,7 @@ static int speyside_set_bias_level_post(struct snd_soc_card *card,
}
ret = snd_soc_dai_set_sysclk(codec_dai,
WM8915_SYSCLK_FLL,
WM8996_SYSCLK_FLL,
48000 * 256,
SND_SOC_CLOCK_IN);
if (ret < 0)
......@@ -149,26 +149,26 @@ static void speyside_set_polarity(struct snd_soc_codec *codec,
int polarity)
{
speyside_jack_polarity = !polarity;
gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);
gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
/* Re-run DAPM to make sure we're using the correct mic bias */
snd_soc_dapm_sync(&codec->dapm);
}
static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd)
static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dai *dai = rtd->codec_dai;
struct snd_soc_codec *codec = rtd->codec;
int ret;
ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK2, 32768, 0);
ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);
if (ret < 0)
return ret;
ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL");
ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL");
if (ret != 0)
pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);
gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
ret = snd_soc_jack_new(codec, "Headset",
SND_JACK_HEADSET | SND_JACK_BTN_0,
......@@ -182,7 +182,7 @@ static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd)
if (ret)
return ret;
wm8915_detect(codec, &speyside_headset, speyside_set_polarity);
wm8996_detect(codec, &speyside_headset, speyside_set_polarity);
return 0;
}
......@@ -205,16 +205,16 @@ static struct snd_soc_dai_link speyside_dai[] = {
.name = "CPU",
.stream_name = "CPU",
.cpu_dai_name = "samsung-i2s.0",
.codec_dai_name = "wm8915-aif1",
.codec_dai_name = "wm8996-aif1",
.platform_name = "samsung-audio",
.codec_name = "wm8915.1-001a",
.init = speyside_wm8915_init,
.codec_name = "wm8996.1-001a",
.init = speyside_wm8996_init,
.ops = &speyside_ops,
},
{
.name = "Baseband",
.stream_name = "Baseband",
.cpu_dai_name = "wm8915-aif2",
.cpu_dai_name = "wm8996-aif2",
.codec_dai_name = "wm1250-ev1",
.codec_name = "wm1250-ev1.1-0027",
.ops = &speyside_ops,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或