From a96684914adb4adb9f81faf6917e0673b92288d8 Mon Sep 17 00:00:00 2001 From: Richard Leitner Date: Mon, 11 Dec 2017 13:16:58 +0100 Subject: [PATCH] phylib: add reset after clk enable support Some PHYs need the refclk to be a continuous clock. Therefore they don't allow turning it off and on again during operation. Nonetheless such a clock switching is performed by some ETH drivers (namely FEC [1]) for power saving reasons. An example for an affected PHY is the SMSC/Microchip LAN8720 in "REF_CLK In Mode". In order to provide a uniform method to overcome this problem this patch adds a new phy_driver flag (PHY_RST_AFTER_CLK_EN) and corresponding function phy_reset_after_clk_enable() to the phylib. These should be used to trigger reset of the PHY after the refclk is switched on again. [1] commit e8fcfcd5684a ("net: fec: optimize the clock management to save power") Signed-off-by: Richard Leitner Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 24 ++++++++++++++++++++++++ include/linux/phy.h | 2 ++ 2 files changed, 26 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 1de5e242b8b4..462c17ed87b8 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1218,6 +1218,30 @@ int phy_loopback(struct phy_device *phydev, bool enable) } EXPORT_SYMBOL(phy_loopback); +/** + * phy_reset_after_clk_enable - perform a PHY reset if needed + * @phydev: target phy_device struct + * + * Description: Some PHYs are known to need a reset after their refclk was + * enabled. This function evaluates the flags and perform the reset if it's + * needed. Returns < 0 on error, 0 if the phy wasn't reset and 1 if the phy + * was reset. + */ +int phy_reset_after_clk_enable(struct phy_device *phydev) +{ + if (!phydev || !phydev->drv) + return -ENODEV; + + if (phydev->drv->flags & PHY_RST_AFTER_CLK_EN) { + phy_device_reset(phydev, 1); + phy_device_reset(phydev, 0); + return 1; + } + + return 0; +} +EXPORT_SYMBOL(phy_reset_after_clk_enable); + /* Generic PHY support and helper functions */ /** diff --git a/include/linux/phy.h b/include/linux/phy.h index d3037e2ffbc4..c4b4715caa21 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -59,6 +59,7 @@ #define PHY_HAS_INTERRUPT 0x00000001 #define PHY_IS_INTERNAL 0x00000002 +#define PHY_RST_AFTER_CLK_EN 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 /* Interface Mode definitions */ @@ -853,6 +854,7 @@ int phy_aneg_done(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); int phy_restart_aneg(struct phy_device *phydev); +int phy_reset_after_clk_enable(struct phy_device *phydev); static inline void phy_device_reset(struct phy_device *phydev, int value) { -- GitLab