提交 a92b36ed 编写于 作者: W Wolfram Sang 提交者: Jean Delvare

i2c-pxa: Misc fixes

While working on the PCA9564-platform driver, I sometimes had a glimpse at the
pxa-driver. I found some suspicious places, and this patch contains my
suggestions. Note: They are not tested, due to no hardware.

[JD: Some more fixes.]
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NMike Rapoport <mike@compulab.co.il>
Tested-by: NEric Miao <ymiao3@marvell.com>
上级 c9a2c46d
......@@ -999,7 +999,14 @@ static int i2c_pxa_probe(struct platform_device *dev)
spin_lock_init(&i2c->lock);
init_waitqueue_head(&i2c->wait);
sprintf(i2c->adap.name, "pxa_i2c-i2c.%u", dev->id);
/*
* If "dev->id" is negative we consider it as zero.
* The reason to do so is to avoid sysfs names that only make
* sense when there are multiple adapters.
*/
i2c->adap.nr = dev->id != -1 ? dev->id : 0;
snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u",
i2c->adap.nr);
i2c->clk = clk_get(&dev->dev, "I2CCLK");
if (IS_ERR(i2c->clk)) {
......@@ -1050,13 +1057,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &dev->dev;
/*
* If "dev->id" is negative we consider it as zero.
* The reason to do so is to avoid sysfs names that only make
* sense when there are multiple adapters.
*/
i2c->adap.nr = dev->id != -1 ? dev->id : 0;
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
......@@ -1080,6 +1080,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
ereqirq:
clk_disable(i2c->clk);
i2c_pxa_disable(dev);
iounmap(i2c->reg_base);
eremap:
clk_put(i2c->clk);
eclk:
......@@ -1089,7 +1090,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
return ret;
}
static int i2c_pxa_remove(struct platform_device *dev)
static int __exit i2c_pxa_remove(struct platform_device *dev)
{
struct pxa_i2c *i2c = platform_get_drvdata(dev);
......@@ -1103,6 +1104,7 @@ static int i2c_pxa_remove(struct platform_device *dev)
clk_put(i2c->clk);
i2c_pxa_disable(dev);
iounmap(i2c->reg_base);
release_mem_region(i2c->iobase, i2c->iosize);
kfree(i2c);
......@@ -1111,9 +1113,10 @@ static int i2c_pxa_remove(struct platform_device *dev)
static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
.remove = i2c_pxa_remove,
.remove = __exit_p(i2c_pxa_remove),
.driver = {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
},
};
......@@ -1122,7 +1125,7 @@ static int __init i2c_adap_pxa_init(void)
return platform_driver_register(&i2c_pxa_driver);
}
static void i2c_adap_pxa_exit(void)
static void __exit i2c_adap_pxa_exit(void)
{
platform_driver_unregister(&i2c_pxa_driver);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册