tty: USB does not need the filp argument in the drivers

And indeed none of them use it. Clean this up as it will make moving to a
standard open method rather easier.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/ark3116.c

@@ -318,8 +318,7 @@ static void ark3116_set_termios(struct tty_struct *tty,
 	return;
 }
 
-static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -334,7 +333,7 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
 		return -ENOMEM;
 	}
 
-	result = usb_serial_generic_open(tty, port, filp);
+	result = usb_serial_generic_open(tty, port);
 	if (result)
 		goto err_out;
 

drivers/usb/serial/belkin_sa.c

@@ -92,7 +92,7 @@ static int debug;
 static int  belkin_sa_startup(struct usb_serial *serial);
 static void belkin_sa_release(struct usb_serial *serial);
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void belkin_sa_close(struct usb_serial_port *port);
 static void belkin_sa_read_int_callback(struct urb *urb);
 static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -213,7 +213,7 @@ static void belkin_sa_release(struct usb_serial *serial)
 
 
 static int  belkin_sa_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	int retval = 0;
 

drivers/usb/serial/ch341.c

@@ -300,8 +300,7 @@ static void ch341_close(struct usb_serial_port *port)
 
 
 /* open this device, set default parameters */
-static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -333,7 +332,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
 		return -EPROTO;
 	}
 
-	r = usb_serial_generic_open(tty, port, filp);
+	r = usb_serial_generic_open(tty, port);
 
 out:	return r;
 }

drivers/usb/serial/console.c

@@ -150,9 +150,9 @@ static int usb_console_setup(struct console *co, char *options)
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
 		if (serial->type->open)
-			retval = serial->type->open(NULL, port, NULL);
+			retval = serial->type->open(NULL, port);
 		else
-			retval = usb_serial_generic_open(NULL, port, NULL);
+			retval = usb_serial_generic_open(NULL, port);
 
 		if (retval) {
 			err("could not open USB console port");

drivers/usb/serial/cp210x.c

@@ -33,8 +33,7 @@
 /*
  * Function Prototypes
  */
-static int cp210x_open(struct tty_struct *, struct usb_serial_port *,
-							struct file *);
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
 static void cp210x_cleanup(struct usb_serial_port *);
 static void cp210x_close(struct usb_serial_port *);
 static void cp210x_get_termios(struct tty_struct *,
@@ -368,8 +367,7 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) {
 	return baud;
 }
 
-static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result;

drivers/usb/serial/cyberjack.c

@@ -61,7 +61,7 @@ static int cyberjack_startup(struct usb_serial *serial);
 static void cyberjack_disconnect(struct usb_serial *serial);
 static void cyberjack_release(struct usb_serial *serial);
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 static void cyberjack_close(struct usb_serial_port *port);
 static int cyberjack_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -173,7 +173,7 @@ static void cyberjack_release(struct usb_serial *serial)
 }
 
 static int  cyberjack_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;

drivers/usb/serial/cypress_m8.c

@@ -172,8 +172,7 @@ static int  cypress_earthmate_startup(struct usb_serial *serial);
 static int  cypress_hidcom_startup(struct usb_serial *serial);
 static int  cypress_ca42v2_startup(struct usb_serial *serial);
 static void cypress_release(struct usb_serial *serial);
-static int  cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  cypress_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void cypress_close(struct usb_serial_port *port);
 static void cypress_dtr_rts(struct usb_serial_port *port, int on);
 static int  cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -633,8 +632,7 @@ static void cypress_release(struct usb_serial *serial)
 }
 
 
-static int cypress_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;

drivers/usb/serial/digi_acceleport.c

@@ -453,8 +453,7 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 static void digi_write_bulk_callback(struct urb *urb);
 static int digi_write_room(struct tty_struct *tty);
 static int digi_chars_in_buffer(struct tty_struct *tty);
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-	struct file *filp);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void digi_close(struct usb_serial_port *port);
 static int digi_carrier_raised(struct usb_serial_port *port);
 static void digi_dtr_rts(struct usb_serial_port *port, int on);
@@ -1347,8 +1346,7 @@ static int digi_carrier_raised(struct usb_serial_port *port)
 	return 0;
 }
 
-static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int ret;
 	unsigned char buf[32];

drivers/usb/serial/empeg.c

@@ -79,8 +79,7 @@ static int debug;
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-						struct file *filp);
+static int  empeg_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void empeg_close(struct usb_serial_port *port);
 static int  empeg_write(struct tty_struct *tty, struct usb_serial_port *port,
 						const unsigned char *buf,
@@ -142,8 +141,7 @@ static int		bytes_out;
 /******************************************************************************
  * Empeg specific driver functions
  ******************************************************************************/
-static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
-				struct file *filp)
+static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -151,7 +149,7 @@ static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Force default termio settings */
-	empeg_set_termios(tty, port, NULL) ;
+	empeg_set_termios(tty, port, NULL);
 
 	bytes_in = 0;
 	bytes_out = 0;

drivers/usb/serial/ftdi_sio.c

@@ -747,8 +747,7 @@ static int  ftdi_sio_probe(struct usb_serial *serial,
 					const struct usb_device_id *id);
 static int  ftdi_sio_port_probe(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove(struct usb_serial_port *port);
-static int  ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  ftdi_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ftdi_close(struct usb_serial_port *port);
 static void ftdi_dtr_rts(struct usb_serial_port *port, int on);
 static int  ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -1680,8 +1679,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int ftdi_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);

drivers/usb/serial/garmin_gps.c

@@ -933,8 +933,7 @@ static int garmin_init_session(struct usb_serial_port *port)
 
 
 
-static int garmin_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	unsigned long flags;
 	int status = 0;

drivers/usb/serial/generic.c

@@ -114,8 +114,7 @@ void usb_serial_generic_deregister(void)
 #endif
 }
 
-int usb_serial_generic_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;

drivers/usb/serial/io_edgeport.c

@@ -205,8 +205,7 @@ static void edge_bulk_out_data_callback(struct urb *urb);
 static void edge_bulk_out_cmd_callback(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int edge_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void edge_close(struct usb_serial_port *port);
 static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -852,8 +851,7 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
  *	If successful, we return 0
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;

drivers/usb/serial/io_ti.c

@@ -1831,8 +1831,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 	tty_kref_put(tty);
 }
 
-static int edge_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial;

drivers/usb/serial/ipaq.c

@@ -75,7 +75,7 @@ static int initial_wait;
 
 /* Function prototypes for an ipaq */
 static int  ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void ipaq_close(struct usb_serial_port *port);
 static int  ipaq_calc_num_ports(struct usb_serial *serial);
 static int  ipaq_startup(struct usb_serial *serial);
@@ -587,7 +587,7 @@ static int		bytes_in;
 static int		bytes_out;
 
 static int ipaq_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+			struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct ipaq_private	*priv;
@@ -628,11 +628,6 @@ static int ipaq_open(struct tty_struct *tty,
 		priv->free_len += PACKET_SIZE;
 	}
 
-	if (tty) {
-		/* FIXME: These two are bogus */
-		tty->raw = 1;
-		tty->real_raw = 1;
-	}
 	/*
 	 * Lose the small buffers usbserial provides. Make larger ones.
 	 */

drivers/usb/serial/ipw.c

@@ -193,8 +193,7 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	return;
 }
 
-static int ipw_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_device *dev = port->serial->dev;
 	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;

drivers/usb/serial/ir-usb.c

@@ -86,8 +86,7 @@ static int buffer_size;
 static int xbof = -1;
 
 static int  ir_startup (struct usb_serial *serial);
-static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filep);
+static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ir_close(struct usb_serial_port *port);
 static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -296,8 +295,7 @@ static int ir_startup(struct usb_serial *serial)
 	return 0;
 }
 
-static int ir_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	char *buffer;
 	int result = 0;

drivers/usb/serial/iuu_phoenix.c

@@ -1018,8 +1018,7 @@ static void iuu_close(struct usb_serial_port *port)
 	}
 }
 
-static int iuu_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;

drivers/usb/serial/keyspan.c

@@ -1209,8 +1209,7 @@ static int keyspan_write_room(struct tty_struct *tty)
 }
 
 
-static int keyspan_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct keyspan_port_private 	*p_priv;
 	struct keyspan_serial_private 	*s_priv;

drivers/usb/serial/keyspan.h

@@ -36,8 +36,7 @@
 
 /* Function prototypes for Keyspan serial converter */
 static int  keyspan_open		(struct tty_struct *tty,
-					 struct usb_serial_port *port,
-					 struct file *filp);
+					 struct usb_serial_port *port);
 static void keyspan_close		(struct usb_serial_port *port);
 static void keyspan_dtr_rts		(struct usb_serial_port *port, int on);
 static int  keyspan_startup		(struct usb_serial *serial);

drivers/usb/serial/keyspan_pda.c

@@ -681,7 +681,7 @@ static int keyspan_pda_carrier_raised(struct usb_serial_port *port)
 
 
 static int keyspan_pda_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+					struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned char room;

drivers/usb/serial/kl5kusb105.c

@@ -75,8 +75,7 @@ static int debug;
 static int  klsi_105_startup(struct usb_serial *serial);
 static void klsi_105_disconnect(struct usb_serial *serial);
 static void klsi_105_release(struct usb_serial *serial);
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void klsi_105_close(struct usb_serial_port *port);
 static int  klsi_105_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
@@ -358,8 +357,7 @@ static void klsi_105_release(struct usb_serial *serial)
 	}
 } /* klsi_105_release */
 
-static int  klsi_105_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
@@ -371,10 +369,6 @@ static int  klsi_105_open(struct tty_struct *tty,
 
 	dbg("%s port %d", __func__, port->number);
 
-	/* force low_latency on so that our tty_push actually forces
-	 * the data through
-	 * tty->low_latency = 1; */
-
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
 	 * vendor command.

drivers/usb/serial/kobil_sct.c

@@ -70,8 +70,7 @@ static int debug;
 /* Function prototypes */
 static int  kobil_startup(struct usb_serial *serial);
 static void kobil_release(struct usb_serial *serial);
-static int  kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  kobil_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void kobil_close(struct usb_serial_port *port);
 static int  kobil_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count);
@@ -211,8 +210,7 @@ static void kobil_release(struct usb_serial *serial)
 }
 
 
-static int kobil_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 	struct kobil_private *priv;

drivers/usb/serial/mct_u232.c

@@ -93,8 +93,7 @@ static int debug;
  */
 static int  mct_u232_startup(struct usb_serial *serial);
 static void mct_u232_release(struct usb_serial *serial);
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void mct_u232_close(struct usb_serial_port *port);
 static void mct_u232_dtr_rts(struct usb_serial_port *port, int on);
 static void mct_u232_read_int_callback(struct urb *urb);
@@ -421,8 +420,7 @@ static void mct_u232_release(struct usb_serial *serial)
 	}
 } /* mct_u232_release */
 
-static int  mct_u232_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int  mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);

drivers/usb/serial/mos7720.c

@@ -319,8 +319,7 @@ static int send_mos_cmd(struct usb_serial *serial, __u8 request, __u16 value,
 	return status;
 }
 
-static int mos7720_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;

drivers/usb/serial/mos7840.c

@@ -824,8 +824,7 @@ static int mos7840_serial_probe(struct usb_serial *serial,
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int response;
 	int j;

drivers/usb/serial/navman.c

@@ -80,8 +80,7 @@ static void navman_read_int_callback(struct urb *urb)
 			__func__, result);
 }
 
-static int navman_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int result = 0;
 

drivers/usb/serial/omninet.c

@@ -64,8 +64,7 @@ static int debug;
 #define BT_IGNITIONPRO_ID	0x2000
 
 /* function prototypes */
-static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void omninet_close(struct usb_serial_port *port);
 static void omninet_read_bulk_callback(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
@@ -163,8 +162,7 @@ static int omninet_attach(struct usb_serial *serial)
 	return 0;
 }
 
-static int omninet_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;

drivers/usb/serial/opticon.c

@@ -144,8 +144,7 @@ static void opticon_bulk_callback(struct urb *urb)
 	spin_unlock(&priv->lock);
 }
 
-static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct opticon_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;

drivers/usb/serial/option.c

@@ -45,8 +45,7 @@
 /* Function prototypes */
 static int  option_probe(struct usb_serial *serial,
 			const struct usb_device_id *id);
-static int  option_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void option_close(struct usb_serial_port *port);
 static void option_dtr_rts(struct usb_serial_port *port, int on);
 
@@ -961,8 +960,7 @@ static int option_chars_in_buffer(struct tty_struct *tty)
 	return data_len;
 }
 
-static int option_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct option_port_private *portdata;
 	int i, err;

drivers/usb/serial/oti6858.c

@@ -141,8 +141,7 @@ struct oti6858_control_pkt {
 	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt))
 
 /* function prototypes */
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void oti6858_close(struct usb_serial_port *port);
 static void oti6858_set_termios(struct tty_struct *tty,
 			struct usb_serial_port *port, struct ktermios *old);
@@ -566,8 +565,7 @@ static void oti6858_set_termios(struct tty_struct *tty,
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int oti6858_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	struct ktermios tmp_termios;

drivers/usb/serial/pl2303.c

@@ -691,8 +691,7 @@ static void pl2303_close(struct usb_serial_port *port)
 
 }
 
-static int pl2303_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -714,8 +713,6 @@ static int pl2303_open(struct tty_struct *tty,
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);

drivers/usb/serial/sierra.c

@@ -734,8 +734,7 @@ static void sierra_close(struct usb_serial_port *port)
 	}
 }
 
-static int sierra_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct sierra_port_private *portdata;
 	struct usb_serial *serial = port->serial;

drivers/usb/serial/spcp8x5.c

@@ -623,8 +623,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 
 /* open the serial port. do some usb system call. set termios and get the line
  * status of the device. then submit the read urb */
-static int spcp8x5_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -658,8 +657,6 @@ static int spcp8x5_open(struct tty_struct *tty,
 	priv->line_status = status & 0xf0 ;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	/* FIXME: need to assert RTS and DTR if CRTSCTS off */
-
 	dbg("%s - submitting read urb", __func__);
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);

drivers/usb/serial/symbolserial.c

@@ -124,8 +124,7 @@ static void symbol_int_callback(struct urb *urb)
 	spin_unlock(&priv->lock);
 }
 
-static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port,
-			struct file *filp)
+static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct symbol_private *priv = usb_get_serial_data(port->serial);
 	unsigned long flags;

drivers/usb/serial/ti_usb_3410_5052.c

@@ -98,8 +98,7 @@ struct ti_device {
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_release(struct usb_serial *serial);
-static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
-		struct file *file);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void ti_close(struct usb_serial_port *port);
 static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		const unsigned char *data, int count);
@@ -492,8 +491,7 @@ static void ti_release(struct usb_serial *serial)
 }
 
 
-static int ti_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_device *tdev;

drivers/usb/serial/usb-serial.c

@@ -244,7 +244,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 
 		/* only call the device specific open if this
 		 * is the first time the port is opened */
-		retval = serial->type->open(tty, port, filp);
+		retval = serial->type->open(tty, port);
 		if (retval)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);

drivers/usb/serial/usb_debug.c

@@ -43,11 +43,10 @@ static struct usb_driver debug_driver = {
 	.no_dynamic_id = 	1,
 };
 
-static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(tty, port, filp);
+	return usb_serial_generic_open(tty, port);
 }
 
 /* This HW really does not support a serial break, so one will be

drivers/usb/serial/visor.c

@@ -36,8 +36,7 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-					struct file *filp);
+static int  visor_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void visor_close(struct usb_serial_port *port);
 static int  visor_write(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf, int count);
@@ -273,8 +272,7 @@ static int stats;
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open(struct tty_struct *tty, struct usb_serial_port *port,
-							struct file *filp)
+static int visor_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);

drivers/usb/serial/whiteheat.c

@@ -146,7 +146,7 @@ static int  whiteheat_firmware_attach(struct usb_serial *serial);
 static int  whiteheat_attach(struct usb_serial *serial);
 static void whiteheat_release(struct usb_serial *serial);
 static int  whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+			struct usb_serial_port *port);
 static void whiteheat_close(struct usb_serial_port *port);
 static int  whiteheat_write(struct tty_struct *tty,
 			struct usb_serial_port *port,
@@ -659,8 +659,7 @@ static void whiteheat_release(struct usb_serial *serial)
 	return;
 }
 
-static int whiteheat_open(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	int		retval = 0;
 

include/linux/usb/serial.h

@@ -238,9 +238,8 @@ struct usb_serial_driver {
 	int (*resume)(struct usb_serial *serial);
 
 	/* serial function calls */
-	/* Called by console with tty = NULL and by tty */
-	int  (*open)(struct tty_struct *tty,
-			struct usb_serial_port *port, struct file *filp);
+	/* Called by console and by the tty layer */
+	int  (*open)(struct tty_struct *tty, struct usb_serial_port *port);
 	void (*close)(struct usb_serial_port *port);
 	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
@@ -300,7 +299,7 @@ static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
 extern void usb_serial_put(struct usb_serial *serial);
 extern int usb_serial_generic_open(struct tty_struct *tty,
-		struct usb_serial_port *port, struct file *filp);
+	struct usb_serial_port *port);
 extern int usb_serial_generic_write(struct tty_struct *tty,
 	struct usb_serial_port *port, const unsigned char *buf, int count);
 extern void usb_serial_generic_close(struct usb_serial_port *port);