diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 4fef1e19936648240ebffd32042149da36312dbf..53fb4fa61b405aa540239492fef2d5a4f94fa9bd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3702,7 +3702,8 @@ static void bnx2x_warpcore_restart_AN_KR(struct bnx2x_phy *phy, static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 lane, i, cl72_ctrl, an_adv = 0; + u16 lane, i, cl72_ctrl, an_adv = 0, val; + u32 wc_lane_config; struct bnx2x *bp = params->bp; static struct bnx2x_reg_set reg_set[] = { {MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X2, 0x7}, @@ -3821,15 +3822,27 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Enable Auto-Detect to support 1G over CL37 as well */ bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10); - + wc_lane_config = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, dev_info. + shared_hw_config.wc_lane_config)); + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), &val); /* Force cl48 sync_status LOW to avoid getting stuck in CL73 * parallel-detect loop when CL73 and CL37 are enabled. */ - CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, - MDIO_AER_BLOCK_AER_REG, 0); + val |= 1 << 11; + + /* Restore Polarity settings in case it was run over by + * previous link owner + */ + if (wc_lane_config & + (SHARED_HW_CFG_RX_LANE0_POL_FLIP_ENABLED << lane)) + val |= 3 << 2; + else + val &= ~(3 << 2); bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, - MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800); - bnx2x_set_aer_mmd(params, phy); + MDIO_WC_REG_RX0_PCI_CTRL + (lane << 4), + val); bnx2x_disable_kr2(params, vars, phy); } @@ -12459,6 +12472,7 @@ static int bnx2x_avoid_link_flap(struct link_params *params, u32 dont_clear_stat, lfa_sts; struct bnx2x *bp = params->bp; + bnx2x_set_mdio_emac_per_phy(bp, params); /* Sync the link parameters */ bnx2x_link_status_update(params, vars); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index cf14218697e4ef881327e5a504470d8f60a04549..c5061353a475434c9b96a48efe454fa4ea8ea37a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -10053,6 +10053,24 @@ static void bnx2x_prev_unload_close_mac(struct bnx2x *bp, #define BCM_5710_UNDI_FW_MF_VERS (0x05) #define BNX2X_PREV_UNDI_MF_PORT(p) (BAR_TSTRORM_INTMEM + 0x150c + ((p) << 4)) #define BNX2X_PREV_UNDI_MF_FUNC(f) (BAR_TSTRORM_INTMEM + 0x184c + ((f) << 4)) + +static bool bnx2x_prev_is_after_undi(struct bnx2x *bp) +{ + /* UNDI marks its presence in DORQ - + * it initializes CID offset for normal bell to 0x7 + */ + if (!(REG_RD(bp, MISC_REG_RESET_REG_1) & + MISC_REGISTERS_RESET_REG_1_RST_DORQ)) + return false; + + if (REG_RD(bp, DORQ_REG_NORM_CID_OFST) == 0x7) { + BNX2X_DEV_INFO("UNDI previously loaded\n"); + return true; + } + + return false; +} + static bool bnx2x_prev_unload_undi_fw_supports_mf(struct bnx2x *bp) { u8 major, minor, version; @@ -10302,6 +10320,10 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) BNX2X_DEV_INFO("Path is unmarked\n"); + /* Cannot proceed with FLR if UNDI is loaded, since FW does not match */ + if (bnx2x_prev_is_after_undi(bp)) + goto out; + /* If function has FLR capabilities, and existing FW version matches * the one required, then FLR will be sufficient to clean any residue * left by previous driver @@ -10322,6 +10344,7 @@ static int bnx2x_prev_unload_uncommon(struct bnx2x *bp) BNX2X_DEV_INFO("Could not FLR\n"); +out: /* Close the MCP request, return failure*/ rc = bnx2x_prev_mcp_done(bp); if (!rc) @@ -10360,19 +10383,13 @@ static int bnx2x_prev_unload_common(struct bnx2x *bp) /* close LLH filters towards the BRB */ bnx2x_set_rx_filter(&bp->link_params, 0); - /* Check if the UNDI driver was previously loaded - * UNDI driver initializes CID offset for normal bell to 0x7 - */ - if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) { - tmp_reg = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (tmp_reg == 0x7) { - BNX2X_DEV_INFO("UNDI previously loaded\n"); - prev_undi = true; - /* clear the UNDI indication */ - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - /* clear possible idle check errors */ - REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); - } + /* Check if the UNDI driver was previously loaded */ + if (bnx2x_prev_is_after_undi(bp)) { + prev_undi = true; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + /* clear possible idle check errors */ + REG_RD(bp, NIG_REG_NIG_INT_STS_CLR_0); } if (!CHIP_IS_E1x(bp)) /* block FW from writing to host */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index a93c7af7afe610fa2b45667653f3ecd6c985f3c6..f7edb4204f91aedc8639fba44eaab53641979487 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1071,8 +1071,10 @@ void bnx2x_iov_init_dq(struct bnx2x *bp) REG_WR(bp, DORQ_REG_VF_TYPE_MIN_MCID_0, 0); REG_WR(bp, DORQ_REG_VF_TYPE_MAX_MCID_0, 0x1ffff); - /* set the VF doorbell threshold */ - REG_WR(bp, DORQ_REG_VF_USAGE_CT_LIMIT, 4); + /* set the VF doorbell threshold. This threshold represents the amount + * of doorbells allowed in the main DORQ fifo for a specific VF. + */ + REG_WR(bp, DORQ_REG_VF_USAGE_CT_LIMIT, 64); } void bnx2x_iov_init_dmae(struct bnx2x *bp)