Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 a483dcbf 编写于 作者: M Magnus Damm 提交者： Simon Horman
浏览文件
操作

ARM: shmobile: lager: Remove legacy board support 

Lager legacy support level is same as the DT case
so remove the legacy code and force people to move
over to using Multiplatform and DT.
Signed-off-by: NMagnus Damm <damm+renesas@opensource.se>
[Remove lager_defconfig and don't build the dtb for legacy kernels]
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
上级 be290241
显示空白变更内容
内联 并排
Showing with 0 addition and 988 deletion
MAINTAINERS
浏览文件 @ a483dcbf
...@@ -1395,7 +1395,6 @@ F: arch/arm/configs/ape6evm_defconfig ...@@ -1395,7 +1395,6 @@ F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig F: arch/arm/configs/bockw_defconfig
F: arch/arm/configs/kzm9g_defconfig F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
F: arch/arm/configs/mackerel_defconfig F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig F: arch/arm/configs/shmobile_defconfig
......
arch/arm/boot/dts/Makefile
浏览文件 @ a483dcbf
...@@ -410,7 +410,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \ ...@@ -410,7 +410,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
r8a7778-bockw.dtb \ r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \ r8a7778-bockw-reference.dtb \
r8a7779-marzen.dtb \ r8a7779-marzen.dtb \
r8a7790-lager.dtb \
sh7372-mackerel.dtb \ sh7372-mackerel.dtb \
sh73a0-kzm9g.dtb \ sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb sh73a0-kzm9g-reference.dtb
......
arch/arm/configs/lager_defconfig 已删除 100644 → 0
浏览文件 @ be290241
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE_LEGACY=y
CONFIG_ARCH_R8A7790=y
CONFIG_MACH_LAGER=y
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_PCI=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCI_RCAR_GEN2_PCIE=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_RCAR=y
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_SH_ETH=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=10
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_GPIO=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_RCAR=y
CONFIG_SPI=y
CONFIG_SPI_RSPI=y
CONFIG_SPI_SH_MSIOF=y
CONFIG_GPIO_SH_PFC=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_RCAR=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_GPIO=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_SOC_CAMERA=y
CONFIG_SOC_CAMERA_PLATFORM=y
CONFIG_VIDEO_RCAR_VIN=y
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
CONFIG_VIDEO_ADV7180=y
CONFIG_DRM=y
CONFIG_DRM_RCAR_DU=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_RCAR=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
arch/arm/mach-shmobile/Kconfig
浏览文件 @ a483dcbf
...@@ -203,13 +203,6 @@ config MACH_MARZEN ...@@ -203,13 +203,6 @@ config MACH_MARZEN
select REGULATOR_FIXED_VOLTAGE if REGULATOR select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF select USE_OF
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select USE_OF
select MICREL_PHY if SH_ETH
select SND_SOC_AK4642 if SND_SIMPLE_CARD
config MACH_KZM9G config MACH_KZM9G
bool "KZM-A9-GT board" bool "KZM-A9-GT board"
depends on ARCH_SH73A0 depends on ARCH_SH73A0
......
arch/arm/mach-shmobile/Makefile
浏览文件 @ a483dcbf
...@@ -65,7 +65,6 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o ...@@ -65,7 +65,6 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
......
arch/arm/mach-shmobile/Makefile.boot
浏览文件 @ a483dcbf
...@@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 ...@@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
......
arch/arm/mach-shmobile/board-lager.c 已删除 100644 → 0
浏览文件 @ be290241
/*
* Lager board support
*
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
* Copyright (C) 2014 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/mtd.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/camera-rcar.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/usb-rcar-gen2-phy.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <linux/spi/flash.h>
#include <linux/spi/rspi.h>
#include <linux/spi/spi.h>
#include <linux/usb/phy.h>
#include <linux/usb/renesas_usbhs.h>
#include <media/soc_camera.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <sound/rcar_snd.h>
#include <sound/simple_card.h>
#include "common.h"
#include "irqs.h"
#include "r8a7790.h"
#include "rcar-gen2.h"
/*
* SSI-AK4643
*
* SW1: 1: AK4643
* 2: CN22
* 3: ADV7511
*
* this command is required when playback.
*
* # amixer set "LINEOUT Mixer DACL" on
*/
/*
* SDHI0 (CN8)
*
* JP3: pin1
* SW20: pin1
* GP5_24: 1: VDD 3.3V (defult)
* 0: VDD 0.0V
* GP5_29: 1: VccQ 3.3V (defult)
* 0: VccQ 1.8V
*
*/
/* LEDS */
static struct gpio_led lager_leds[] = {
{
.name = "led8",
.gpio = RCAR_GP_PIN(5, 17),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led7",
.gpio = RCAR_GP_PIN(4, 23),
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led6",
.gpio = RCAR_GP_PIN(4, 22),
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static const struct gpio_led_platform_data lager_leds_pdata __initconst = {
.leds = lager_leds,
.num_leds = ARRAY_SIZE(lager_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
.wakeup = 1, .debounce_interval = 20 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
GPIO_KEY(KEY_1, RCAR_GP_PIN(1, 14), "SW2-pin1"),
};
static const struct gpio_keys_platform_data lager_keys_pdata __initconst = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* Fixed 3.3V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
};
/*
* SDHI regulator macro
*
** FIXME**
* Lager board vqmmc is provided via DA9063 PMIC chip,
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
* but, it doesn't have regulator support at this point.
* It uses gpio-regulator for vqmmc as quick-hack.
*/
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
.constraints = { \
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
.supply_name = "SDHI" #idx "Vcc", \
.microvolts = 3300000, \
.gpio = vdd_pin, \
.enable_high = 1, \
.init_data = &vcc_sdhi##idx##_init_data, \
}; \
\
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
\
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
.constraints = { \
.input_uV = 3300000, \
.min_uV = 1800000, \
.max_uV = 3300000, \
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
REGULATOR_CHANGE_STATUS, \
}, \
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
.num_consumer_supplies = 1, \
}; \
\
static struct gpio vccq_sdhi##idx##_gpio = \
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
\
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
{ .value = 1800000, .gpios = 0 }, \
{ .value = 3300000, .gpios = 1 }, \
}; \
\
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
.supply_name = "vqmmc", \
.gpios = &vccq_sdhi##idx##_gpio, \
.nr_gpios = 1, \
.states = vccq_sdhi##idx##_states, \
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
.type = REGULATOR_VOLTAGE, \
.init_data = &vccq_sdhi##idx##_init_data, \
};
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
/* MMCIF */
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
.clk_ctrl2_present = true,
.ccs_unsupported = true,
};
static const struct resource mmcif1_resources[] __initconst = {
DEFINE_RES_MEM(0xee220000, 0x80),
DEFINE_RES_IRQ(gic_spi(170)),
};
/* Ether */
static const struct sh_eth_plat_data ether_pdata __initconst = {
.phy = 0x1,
.phy_irq = irq_pin(0),
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static const struct resource ether_resources[] __initconst = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
static const struct platform_device_info ether_info __initconst = {
.name = "r8a7790-ether",
.id = -1,
.res = ether_resources,
.num_res = ARRAY_SIZE(ether_resources),
.data = &ether_pdata,
.size_data = sizeof(ether_pdata),
.dma_mask = DMA_BIT_MASK(32),
};
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64Mb) */
static struct mtd_partition spi_flash_part[] = {
/* Reserved for user loader program, read-only */
{
.name = "loader",
.offset = 0,
.size = SZ_256K,
.mask_flags = MTD_WRITEABLE,
},
/* Reserved for user program, read-only */
{
.name = "user",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = MTD_WRITEABLE,
},
/* All else is writable (e.g. JFFS2) */
{
.name = "flash",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static const struct flash_platform_data spi_flash_data = {
.name = "m25p80",
.parts = spi_flash_part,
.nr_parts = ARRAY_SIZE(spi_flash_part),
.type = "s25fl512s",
};
static const struct rspi_plat_data qspi_pdata __initconst = {
.num_chipselect = 1,
};
static const struct spi_board_info spi_info[] __initconst = {
{
.modalias = "m25p80",
.platform_data = &spi_flash_data,
.mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
.max_speed_hz = 30000000,
.bus_num = 0,
.chip_select = 0,
},
};
/* QSPI resource */
static const struct resource qspi_resources[] __initconst = {
DEFINE_RES_MEM(0xe6b10000, 0x1000),
DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
};
/* VIN */
static const struct resource vin_resources[] __initconst = {
/* VIN0 */
DEFINE_RES_MEM(0xe6ef0000, 0x1000),
DEFINE_RES_IRQ(gic_spi(188)),
/* VIN1 */
DEFINE_RES_MEM(0xe6ef1000, 0x1000),
DEFINE_RES_IRQ(gic_spi(189)),
};
static void __init lager_add_vin_device(unsigned idx,
struct rcar_vin_platform_data *pdata)
{
struct platform_device_info vin_info = {
.name = "r8a7790-vin",
.id = idx,
.res = &vin_resources[idx * 2],
.num_res = 2,
.dma_mask = DMA_BIT_MASK(32),
.data = pdata,
.size_data = sizeof(*pdata),
};
BUG_ON(idx > 1);
platform_device_register_full(&vin_info);
}
#define LAGER_CAMERA(idx, name, addr, pdata, flag) \
static struct i2c_board_info i2c_cam##idx##_device = { \
I2C_BOARD_INFO(name, addr), \
}; \
\
static struct rcar_vin_platform_data vin##idx##_pdata = { \
.flags = flag, \
}; \
\
static struct soc_camera_link cam##idx##_link = { \
.bus_id = idx, \
.board_info = &i2c_cam##idx##_device, \
.i2c_adapter_id = 2, \
.module_name = name, \
.priv = pdata, \
}
/* Camera 0 is not currently supported due to adv7612 support missing */
LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
static void __init lager_add_camera1_device(void)
{
platform_device_register_data(NULL, "soc-camera-pdrv", 1,
&cam1_link, sizeof(cam1_link));
lager_add_vin_device(1, &vin1_pdata);
}
/* SATA1 */
static const struct resource sata1_resources[] __initconst = {
DEFINE_RES_MEM(0xee500000, 0x2000),
DEFINE_RES_IRQ(gic_spi(106)),
};
static const struct platform_device_info sata1_info __initconst = {
.name = "sata-r8a7790",
.id = 1,
.res = sata1_resources,
.num_res = ARRAY_SIZE(sata1_resources),
.dma_mask = DMA_BIT_MASK(32),
};
/* USBHS */
static const struct resource usbhs_resources[] __initconst = {
DEFINE_RES_MEM(0xe6590000, 0x100),
DEFINE_RES_IRQ(gic_spi(107)),
};
struct usbhs_private {
struct renesas_usbhs_platform_info info;
struct usb_phy *phy;
};
#define usbhs_get_priv(pdev) \
container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
static int usbhs_power_ctrl(struct platform_device *pdev,
void __iomem *base, int enable)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
if (!priv->phy)
return -ENODEV;
if (enable) {
int retval = usb_phy_init(priv->phy);
if (!retval)
retval = usb_phy_set_suspend(priv->phy, 0);
return retval;
}
usb_phy_set_suspend(priv->phy, 1);
usb_phy_shutdown(priv->phy);
return 0;
}
static int usbhs_hardware_init(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
struct usb_phy *phy;
int ret;
/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
* setting to avoid VBUS short circuit due to wrong cable.
* PWEN should be pulled up high if USB Function is selected by SW5
*/
gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
ret = -ENOTSUPP;
goto error;
}
phy = usb_get_phy_dev(&pdev->dev, 0);
if (IS_ERR(phy)) {
ret = PTR_ERR(phy);
goto error;
}
priv->phy = phy;
return 0;
error:
gpio_free(RCAR_GP_PIN(5, 18));
return ret;
}
static int usbhs_hardware_exit(struct platform_device *pdev)
{
struct usbhs_private *priv = usbhs_get_priv(pdev);
if (!priv->phy)
return 0;
usb_put_phy(priv->phy);
priv->phy = NULL;
gpio_free(RCAR_GP_PIN(5, 18));
return 0;
}
static int usbhs_get_id(struct platform_device *pdev)
{
return USBHS_GADGET;
}
static u32 lager_usbhs_pipe_type[] = {
USB_ENDPOINT_XFER_CONTROL,
USB_ENDPOINT_XFER_ISOC,
USB_ENDPOINT_XFER_ISOC,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_INT,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
USB_ENDPOINT_XFER_BULK,
};
static struct usbhs_private usbhs_priv __initdata = {
.info = {
.platform_callback = {
.power_ctrl = usbhs_power_ctrl,
.hardware_init = usbhs_hardware_init,
.hardware_exit = usbhs_hardware_exit,
.get_id = usbhs_get_id,
},
.driver_param = {
.buswait_bwait = 4,
.pipe_type = lager_usbhs_pipe_type,
.pipe_size = ARRAY_SIZE(lager_usbhs_pipe_type),
},
}
};
static void __init lager_register_usbhs(void)
{
usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
platform_device_register_resndata(NULL,
"renesas_usbhs", -1,
usbhs_resources,
ARRAY_SIZE(usbhs_resources),
&usbhs_priv.info,
sizeof(usbhs_priv.info));
}
/* USBHS PHY */
static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
.chan0_pci = 0, /* Channel 0 is USBHS */
.chan2_pci = 1, /* Channel 2 is PCI USB */
};
static const struct resource usbhs_phy_resources[] __initconst = {
DEFINE_RES_MEM(0xe6590100, 0x100),
};
/* I2C */
static struct i2c_board_info i2c2_devices[] = {
{
I2C_BOARD_INFO("ak4643", 0x12),
}
};
/* Sound */
static struct resource rsnd_resources[] __initdata = {
[RSND_GEN2_SCU] = DEFINE_RES_MEM(0xec500000, 0x1000),
[RSND_GEN2_ADG] = DEFINE_RES_MEM(0xec5a0000, 0x100),
[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
[RSND_GEN2_SSI] = DEFINE_RES_MEM(0xec541000, 0x1280),
};
static struct rsnd_ssi_platform_info rsnd_ssi[] = {
RSND_SSI(0, gic_spi(370), 0),
RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE),
};
static struct rsnd_src_platform_info rsnd_src[2] = {
/* no member at this point */
};
static struct rsnd_dai_platform_info rsnd_dai = {
.playback = { .ssi = &rsnd_ssi[0], },
.capture = { .ssi = &rsnd_ssi[1], },
};
static struct rcar_snd_info rsnd_info = {
.flags = RSND_GEN2,
.ssi_info = rsnd_ssi,
.ssi_info_nr = ARRAY_SIZE(rsnd_ssi),
.src_info = rsnd_src,
.src_info_nr = ARRAY_SIZE(rsnd_src),
.dai_info = &rsnd_dai,
.dai_info_nr = 1,
};
static struct asoc_simple_card_info rsnd_card_info = {
.name = "AK4643",
.card = "SSI01-AK4643",
.codec = "ak4642-codec.2-0012",
.platform = "rcar_sound",
.daifmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
.cpu_dai = {
.name = "rcar_sound",
},
.codec_dai = {
.name = "ak4642-hifi",
.sysclk = 11289600,
},
};
static void __init lager_add_rsnd_device(void)
{
struct platform_device_info cardinfo = {
.name = "asoc-simple-card",
.id = -1,
.data = &rsnd_card_info,
.size_data = sizeof(struct asoc_simple_card_info),
.dma_mask = DMA_BIT_MASK(32),
};
i2c_register_board_info(2, i2c2_devices,
ARRAY_SIZE(i2c2_devices));
platform_device_register_resndata(
NULL, "rcar_sound", -1,
rsnd_resources, ARRAY_SIZE(rsnd_resources),
&rsnd_info, sizeof(rsnd_info));
platform_device_register_full(&cardinfo);
}
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi0_resources[] __initdata = {
DEFINE_RES_MEM(0xee100000, 0x200),
DEFINE_RES_IRQ(gic_spi(165)),
};
/* SDHI2 */
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_POWER_OFF_CARD,
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
TMIO_MMC_WRPROTECT_DISABLE,
};
static struct resource sdhi2_resources[] __initdata = {
DEFINE_RES_MEM(0xee140000, 0x100),
DEFINE_RES_IRQ(gic_spi(167)),
};
/* Internal PCI1 */
static const struct resource pci1_resources[] __initconst = {
DEFINE_RES_MEM(0xee0b0000, 0x10000), /* CFG */
DEFINE_RES_MEM(0xee0a0000, 0x10000), /* MEM */
DEFINE_RES_IRQ(gic_spi(112)),
};
static const struct platform_device_info pci1_info __initconst = {
.name = "pci-rcar-gen2",
.id = 1,
.res = pci1_resources,
.num_res = ARRAY_SIZE(pci1_resources),
.dma_mask = DMA_BIT_MASK(32),
};
static void __init lager_add_usb1_device(void)
{
platform_device_register_full(&pci1_info);
}
/* Internal PCI2 */
static const struct resource pci2_resources[] __initconst = {
DEFINE_RES_MEM(0xee0d0000, 0x10000), /* CFG */
DEFINE_RES_MEM(0xee0c0000, 0x10000), /* MEM */
DEFINE_RES_IRQ(gic_spi(113)),
};
static const struct platform_device_info pci2_info __initconst = {
.name = "pci-rcar-gen2",
.id = 2,
.res = pci2_resources,
.num_res = ARRAY_SIZE(pci2_resources),
.dma_mask = DMA_BIT_MASK(32),
};
static void __init lager_add_usb2_device(void)
{
platform_device_register_full(&pci2_info);
}
static const struct pinctrl_map lager_pinctrl_map[] = {
/* DU (CN10: ARGB0, CN13: LVDS) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_rgb666", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_sync_1", "du"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
"du_clk_out_0", "du"),
/* I2C2 */
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar.2", "pfc-r8a7790",
"i2c2", "i2c2"),
/* QSPI */
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
"qspi_ctrl", "qspi"),
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7790",
"qspi_data4", "qspi"),
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
"scif0_data", "scif0"),
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
"scif1_data", "scif1"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7790",
"sdhi0_cd", "sdhi0"),
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
"sdhi2_data4", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
"sdhi2_ctrl", "sdhi2"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7790",
"sdhi2_cd", "sdhi2"),
/* SSI (CN17: sound) */
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi0129_ctrl", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi0_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"ssi1_data", "ssi"),
PIN_MAP_MUX_GROUP_DEFAULT("rcar_sound", "pfc-r8a7790",
"audio_clk_a", "audio_clk"),
/* MMCIF1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_data8", "mmc1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_ctrl", "mmc1"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"intc_irq0", "intc"),
/* VIN0 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_data24", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_sync", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_field", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_clkenb", "vin0"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
"vin0_clk", "vin0"),
/* VIN1 */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
"vin1_data8", "vin1"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
"vin1_clk", "vin1"),
/* USB0 */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
"usb0_ovc_vbus", "usb0"),
/* USB1 */
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.1", "pfc-r8a7790",
"usb1", "usb1"),
/* USB2 */
PIN_MAP_MUX_GROUP_DEFAULT("pci-rcar-gen2.2", "pfc-r8a7790",
"usb2", "usb2"),
};
static void __init lager_add_standard_devices(void)
{
int fixed_regulator_idx = 0;
int gpio_regulator_idx = 0;
r8a7790_clock_init();
pinctrl_register_mappings(lager_pinctrl_map,
ARRAY_SIZE(lager_pinctrl_map));
r8a7790_pinmux_init();
r8a7790_add_standard_devices();
platform_device_register_data(NULL, "leds-gpio", -1,
&lager_leds_pdata,
sizeof(lager_leds_pdata));
platform_device_register_data(NULL, "gpio-keys", -1,
&lager_keys_pdata,
sizeof(lager_keys_pdata));
regulator_register_always_on(fixed_regulator_idx++,
"fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register_resndata(NULL, "sh_mmcif", 1,
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
&mmcif1_pdata, sizeof(mmcif1_pdata));
platform_device_register_full(&ether_info);
platform_device_register_resndata(NULL, "qspi", 0,
qspi_resources,
ARRAY_SIZE(qspi_resources),
&qspi_pdata, sizeof(qspi_pdata));
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(NULL, "reg-fixed-voltage", fixed_regulator_idx++,
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
platform_device_register_data(NULL, "gpio-regulator", gpio_regulator_idx++,
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
lager_add_camera1_device();
platform_device_register_full(&sata1_info);
platform_device_register_resndata(NULL, "usb_phy_rcar_gen2",
-1, usbhs_phy_resources,
ARRAY_SIZE(usbhs_phy_resources),
&usbhs_phy_pdata,
sizeof(usbhs_phy_pdata));
lager_register_usbhs();
lager_add_usb1_device();
lager_add_usb2_device();
lager_add_rsnd_device();
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
}
/*
* Ether LEDs on the Lager board are named LINK and ACTIVE which corresponds
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
* 14-15. We have to set them back to 01 from the default 00 value each time
* the PHY is reset. It's also important because the PHY's LED0 signal is
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
* bounce on and off after each packet, which we apparently want to avoid.
*/
static int lager_ksz8041_fixup(struct phy_device *phydev)
{
u16 phyctrl1 = phy_read(phydev, 0x1e);
phyctrl1 &= ~0xc000;
phyctrl1 |= 0x4000;
return phy_write(phydev, 0x1e, phyctrl1);
}
static void __init lager_init(void)
{
lager_add_standard_devices();
irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
if (IS_ENABLED(CONFIG_PHYLIB))
phy_register_fixup_for_id("r8a7790-ether-ff:01",
lager_ksz8041_fixup);
}
static const char * const lager_boards_compat_dt[] __initconst = {
"renesas,lager",
NULL,
};
DT_MACHINE_START(LAGER_DT, "lager")
.smp = smp_ops(r8a7790_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
.init_machine = lager_init,
.init_late = shmobile_init_late,
.reserve = rcar_gen2_reserve,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或