diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 800be38c78b47f5d7990243bc71bd8fb14c2bdc6..c49fc1e7895d190d595db061feec526817d5363a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -203,11 +203,9 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
 /* check TDI/ARC silicon is in host mode */
 static int tdi_in_host_mode (struct ehci_hcd *ehci)
 {
-	u32 __iomem	*reg_ptr;
 	u32		tmp;
 
-	reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE);
-	tmp = ehci_readl(ehci, reg_ptr);
+	tmp = ehci_readl(ehci, &ehci->regs->usbmode);
 	return (tmp & 3) == USBMODE_CM_HC;
 }
 
@@ -303,11 +301,9 @@ static int handshake_on_error_set_halt(struct ehci_hcd *ehci, void __iomem *ptr,
 /* put TDI/ARC silicon into EHCI mode */
 static void tdi_reset (struct ehci_hcd *ehci)
 {
-	u32 __iomem	*reg_ptr;
 	u32		tmp;
 
-	reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE);
-	tmp = ehci_readl(ehci, reg_ptr);
+	tmp = ehci_readl(ehci, &ehci->regs->usbmode);
 	tmp |= USBMODE_CM_HC;
 	/* The default byte access to MMR space is LE after
 	 * controller reset. Set the required endian mode
@@ -315,7 +311,7 @@ static void tdi_reset (struct ehci_hcd *ehci)
 	 */
 	if (ehci_big_endian_mmio(ehci))
 		tmp |= USBMODE_BE;
-	ehci_writel(ehci, tmp, reg_ptr);
+	ehci_writel(ehci, tmp, &ehci->regs->usbmode);
 }
 
 /* reset a non-running (STS_HALT == 1) controller */
@@ -339,9 +335,8 @@ static int ehci_reset (struct ehci_hcd *ehci)
 
 	if (ehci->has_hostpc) {
 		ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
-			(u32 __iomem *)(((u8 *)ehci->regs) + USBMODE_EX));
-		ehci_writel(ehci, TXFIFO_DEFAULT,
-			(u32 __iomem *)(((u8 *)ehci->regs) + TXFILLTUNING));
+				&ehci->regs->usbmode_ex);
+		ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning);
 	}
 	if (retval)
 		return retval;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index dd5eef6af6df6143bf1098ce8cea68b1266299b2..db05e358677af4d1b6207ecf90a365b3fb1b1a64 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -149,10 +149,8 @@ static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	if (ehci->has_hostpc) {
 		port = HCS_N_PORTS(ehci->hcs_params);
 		while (port--) {
-			u32 __iomem	*hostpc_reg;
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
 
-			hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
-					+ HOSTPC0 + 4 * port);
 			temp = ehci_readl(ehci, hostpc_reg);
 			ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
 		}
@@ -185,10 +183,8 @@ static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 	if (ehci->has_hostpc) {
 		port = HCS_N_PORTS(ehci->hcs_params);
 		while (port--) {
-			u32 __iomem	*hostpc_reg;
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
 
-			hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
-					+ HOSTPC0 + 4 * port);
 			temp = ehci_readl(ehci, hostpc_reg);
 			ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
 		}
@@ -285,11 +281,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 
 		port = HCS_N_PORTS(ehci->hcs_params);
 		while (port--) {
-			u32 __iomem	*hostpc_reg;
+			u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[port];
 			u32		t3;
 
-			hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
-					+ HOSTPC0 + 4 * port);
 			t3 = ehci_readl(ehci, hostpc_reg);
 			ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
 			t3 = ehci_readl(ehci, hostpc_reg);
@@ -388,10 +382,9 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		i = HCS_N_PORTS(ehci->hcs_params);
 		while (i--) {
 			if (test_bit(i, &ehci->bus_suspended)) {
-				u32 __iomem	*hostpc_reg;
+				u32 __iomem	*hostpc_reg =
+							&ehci->regs->hostpc[i];
 
-				hostpc_reg = (u32 __iomem *)((u8 *) ehci->regs
-						+ HOSTPC0 + 4 * i);
 				temp = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp & ~HOSTPC_PHCD,
 						hostpc_reg);
@@ -667,7 +660,7 @@ static int ehci_hub_control (
 	int		ports = HCS_N_PORTS (ehci->hcs_params);
 	u32 __iomem	*status_reg = &ehci->regs->port_status[
 				(wIndex & 0xff) - 1];
-	u32 __iomem	*hostpc_reg = NULL;
+	u32 __iomem	*hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1];
 	u32		temp, temp1, status;
 	unsigned long	flags;
 	int		retval = 0;
@@ -680,9 +673,6 @@ static int ehci_hub_control (
 	 * power, "this is the one", etc.  EHCI spec supports this.
 	 */
 
-	if (ehci->has_hostpc)
-		hostpc_reg = (u32 __iomem *)((u8 *)ehci->regs
-				+ HOSTPC0 + 4 * ((wIndex & 0xff) - 1));
 	spin_lock_irqsave (&ehci->lock, flags);
 	switch (typeReq) {
 	case ClearHubFeature:
@@ -734,7 +724,7 @@ static int ehci_hub_control (
 				goto error;
 
 			/* clear phy low-power mode before resume */
-			if (hostpc_reg) {
+			if (ehci->has_hostpc) {
 				temp1 = ehci_readl(ehci, hostpc_reg);
 				ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
 						hostpc_reg);
@@ -984,7 +974,7 @@ static int ehci_hub_control (
 			temp &= ~PORT_WKCONN_E;
 			temp |= PORT_WKDISC_E | PORT_WKOC_E;
 			ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
-			if (hostpc_reg) {
+			if (ehci->has_hostpc) {
 				spin_unlock_irqrestore(&ehci->lock, flags);
 				msleep(5);/* 5ms for HCD enter low pwr mode */
 				spin_lock_irqsave(&ehci->lock, flags);
diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h
index 7cc95ee3606bcc415978f316f5c1f0d94c2ca0bb..de4b9ed5d5ddf42491b5976b328075b234947dbc 100644
--- a/include/linux/usb/ehci_def.h
+++ b/include/linux/usb/ehci_def.h
@@ -111,7 +111,13 @@ struct ehci_regs {
 	/* ASYNCLISTADDR: offset 0x18 */
 	u32		async_next;	/* address of next async queue head */
 
-	u32		reserved[9];
+	u32		reserved1[2];
+
+	/* TXFILLTUNING: offset 0x24 */
+	u32		txfill_tuning;	/* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
+
+	u32		reserved2[6];
 
 	/* CONFIGFLAG: offset 0x40 */
 	u32		configured_flag;
@@ -155,26 +161,34 @@ struct ehci_regs {
 #define PORT_CSC	(1<<1)		/* connect status change */
 #define PORT_CONNECT	(1<<0)		/* device connected */
 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
-};
 
-#define USBMODE		0x68		/* USB Device mode */
+	u32		reserved3[9];
+
+	/* USBMODE: offset 0x68 */
+	u32		usbmode;	/* USB Device mode */
 #define USBMODE_SDIS	(1<<3)		/* Stream disable */
 #define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
 #define USBMODE_CM_HC	(3<<0)		/* host controller mode */
 #define USBMODE_CM_IDLE	(0<<0)		/* idle state */
 
+	u32		reserved4[7];
+
 /* Moorestown has some non-standard registers, partially due to the fact that
  * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
  * PORTSCx
  */
-#define HOSTPC0		0x84		/* HOSTPC extension */
+	/* HOSTPC: offset 0x84 */
+	u32		hostpc[0];	/* HOSTPC extension */
 #define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
 #define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
-#define USBMODE_EX	0xc8		/* USB Device mode extension */
+
+	u32		reserved5[17];
+
+	/* USBMODE_EX: offset 0xc8 */
+	u32		usbmode_ex;	/* USB Device mode extension */
 #define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
 #define USBMODE_EX_HC	(3<<0)		/* host controller mode */
-#define TXFILLTUNING	0x24		/* TX FIFO Tuning register */
-#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
+};
 
 /* Appendix C, Debug port ... intended for use with special "debug devices"
  * that can help if there's no serial console.  (nonstandard enumeration.)