diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 61b180ea92ca4ae6c15cf98808533ff3f8f608b3..3f31f9206fb36ca1cc0802378961cd409846c977 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -22,6 +22,8 @@
 				reg = <0x44>;
 				interrupt-parent = <&gpio6>;
 				interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35893_tvk_mode>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -64,5 +66,16 @@
 				};
 			};
 		};
+		pinctrl {
+			/* Pull up this GPIO pin */
+			tc35893 {
+				tc35893_tvk_mode: tc35893_tvk {
+					tvk_cfg {
+						ste,pins = "GPIO218_AH11";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index cfd7ef306d49bfb40c260cc18e205e9b7f67751e..6fc94ea65ab9b08b3afbaddb7d864dfd3cbb7881 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -33,6 +33,8 @@
 				reg = <0x42>;
 				interrupt-parent = <&gpio6>;
 				interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&tc35892_hrefprev60_mode>;
 
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -71,6 +73,14 @@
 
 				};
 			};
+			tc35892 {
+				tc35892_hrefprev60_mode: tc35892_hrefprev60 {
+					hrefprev60_cfg {
+						ste,pins = "GPIO217_AH12";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index f213222cf22082bc2b34c1ff35738a70c55abd7e..9aea983e78b5537305410138064172e6bdd4c0e8 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -31,6 +31,11 @@
 		ste,output = <OUTPUT_LOW>;
 	};
 
+	gpio_in_pu: gpio_input_pull_up {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,input = <INPUT_PULLUP>;
+	};
+
 	gpio_out_lo: gpio_output_low {
 		ste,gpio = <GPIOMODE_ENABLED>;
 		ste,output = <OUTPUT_LOW>;
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f7034cbdc630fc90026b9f9eab61c12e7e309d0e..c032392294a088ebee6501dbef4be6daefe4c772 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -340,11 +340,6 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
 	DB8500_PIN_HOG("GPIO68_E1", in_pu),
 	DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
-	/*
-	 * STMPE1601/tc35893 keypad IRQ GPIO 218
-	 * TODO: set for snowball and HREF really??
-	 */
-	DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu),
 	/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
 	DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
 	DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
@@ -625,8 +620,6 @@ static struct pinctrl_map __initdata mop500_pinmap[] = {
 	DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"),
 	DB8500_PIN_HOG("GPIO6_AF6", in_pu),
 	DB8500_PIN_HOG("GPIO7_AG5", in_pu),
-	/* TC35892 IRQ, pull up the line, let the driver mux in the pin */
-	DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu),
 	/*
 	 * Runtime stuff: make it possible to mux in the SKE keypad
 	 * and bias the pins