Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 a429638c 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits)
  ASoC: twl6040 - Add method to query optimum PDM_DL1 gain
  ALSA: hda - Fix the lost power-setup of seconary pins after PM resume
  ALSA: usb-audio: add Yamaha MOX6/MOX8 support
  ALSA: virtuoso: add S/PDIF input support for all Xonars
  ALSA: ice1724 - Support for ooAoo SQ210a
  ALSA: ice1724 - Allow card info based on model only
  ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations
  ALSA: hdspm - Provide unique driver id based on card serial
  ASoC: Dynamically allocate the rtd device for a non-empty release()
  ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC
  ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs
  ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs
  ALSA: hda - Use auto-parser for HP laptops with cx20459 codec
  ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info()
  ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref()
  ALSA: hda/cirrus - support for iMac12,2 model
  ASoC: cx20442: add bias control over a platform provided regulator
  ALSA: usb-audio - Avoid flood of frame-active debug messages
  ALSA: snd-usb-us122l: Delete calls to preempt_disable
  mfd: Put WM8994 into cache only mode when suspending
  ...

Fix up trivial conflicts in:
 - arch/arm/mach-s3c64xx/mach-crag6410.c:
	renamed speyside_wm8962 to tobermory, added littlemill right
	next to it
 - drivers/base/regmap/{regcache.c,regmap.c}:
	duplicate diff that had already come in with other changes in
	the regmap tree
上级 5cf9a4e6 9e4ce164
展开全部 隐藏空白更改
内联 并排
Showing with 17132 addition and 16511 deletion
Documentation/DocBook/writing-an-alsa-driver.tmpl
浏览文件 @ a429638c
......@@ -404,7 +404,7 @@
/* SNDRV_CARDS: maximum number of cards supported by this module */
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
/* definition of the chip-specific record */
struct mychip {
......
Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt 0 → 100644
浏览文件 @ a429638c
NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
the second being the connection's source. Valid names for sources and
sinks are the WM8903's pins, and the jacks on the board:
WM8903 pins:
* IN1L
* IN1R
* IN2L
* IN2R
* IN3L
* IN3R
* DMICDAT
* HPOUTL
* HPOUTR
* LINEOUTL
* LINEOUTR
* LOP
* LON
* ROP
* RON
* MICBIAS
Board connectors:
* Headphone Jack
* Int Spk
* Mic Jack
- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
- nvidia,audio-codec : The phandle of the WM8903 audio codec
Optional properties:
- nvidia,spkr-en-gpios : The GPIO that enables the speakers
- nvidia,hp-mute-gpios : The GPIO that mutes the headphones
- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
- nvidia,int-mic-en-gpios : The GPIO that enables the internal microphone
- nvidia,ext-mic-en-gpios : The GPIO that enables the external microphone
Example:
sound {
compatible = "nvidia,tegra-audio-wm8903-harmony",
"nvidia,tegra-audio-wm8903"
nvidia,model = "tegra-wm8903-harmony";
nvidia,audio-routing =
"Headphone Jack", "HPOUTR",
"Headphone Jack", "HPOUTL",
"Int Spk", "ROP",
"Int Spk", "RON",
"Int Spk", "LOP",
"Int Spk", "LON",
"Mic Jack", "MICBIAS",
"IN1L", "Mic Jack";
nvidia,i2s-controller = <&i2s1>;
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&codec 2 0>;
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
Documentation/devicetree/bindings/sound/tegra20-das.txt 0 → 100644
浏览文件 @ a429638c
NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
Required properties:
- compatible : "nvidia,tegra20-das"
- reg : Should contain DAS registers location and length
Example:
das@70000c00 {
compatible = "nvidia,tegra20-das";
reg = <0x70000c00 0x80>;
};
Documentation/devicetree/bindings/sound/tegra20-i2s.txt 0 → 100644
浏览文件 @ a429638c
NVIDIA Tegra 20 I2S controller
Required properties:
- compatible : "nvidia,tegra20-i2s"
- reg : Should contain I2S registers location and length
- interrupts : Should contain I2S interrupt
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this I2S controller
Example:
i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
nvidia,dma-request-selector = < &apbdma 2 >;
};
Documentation/devicetree/bindings/sound/wm8903.txt 0 → 100644
浏览文件 @ a429638c
WM8903 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "wlf,wm8903"
- reg : the I2C address of the device.
- gpio-controller : Indicates this device is a GPIO controller.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters (currently unused).
Optional properties:
- interrupts : The interrupt line the codec is connected to.
- micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
default is 0.
- micdet-delay : The debounce delay for microphone detection in mS. If
absent, the default is 100.
- gpio-cfg : A list of GPIO configuration register values. The list must
be 5 entries long. If absent, no configuration of these registers is
performed. If any entry has the value 0xffffffff, that GPIO's
configuration will not be modified.
Example:
codec: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupts = < 347 >;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = <
0x0600 /* DMIC_LR, output */
0x0680 /* DMIC_DAT, input */
0x0000 /* GPIO, output, low */
0x0200 /* Interrupt, output */
0x01a0 /* BCLK, input, active high */
>;
};
Documentation/devicetree/bindings/sound/wm8994.txt 0 → 100644
浏览文件 @ a429638c
WM1811/WM8994/WM8958 audio CODEC
These devices support both I2C and SPI (configured with pin strapping
on the board).
Required properties:
- compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
Example:
codec: wm8994@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
};
Documentation/devicetree/bindings/vendor-prefixes.txt
浏览文件 @ a429638c
......@@ -42,4 +42,5 @@ sirf SiRF Technology, Inc.
st STMicroelectronics
stericsson ST-Ericsson
ti Texas Instruments
wlf Wolfson Microelectronics
xlnx Xilinx
Documentation/sound/alsa/HD-Audio-Models.txt
浏览文件 @ a429638c
......@@ -42,19 +42,7 @@ ALC260
ALC262
======
fujitsu Fujitsu Laptop
benq Benq ED8
benq-t31 Benq T31
hippo Hippo (ATI) with jack detection, Sony UX-90s
hippo_1 Hippo (Benq) with jack detection
toshiba-s06 Toshiba S06
toshiba-rx1 Toshiba RX1
tyan Tyan Thunder n6650W (S2915-E)
ultra Samsung Q1 Ultra Vista model
lenovo-3000 Lenovo 3000 y410
nec NEC Versa S9100
basic fixed pin assignment w/o SPDIF
auto auto-config reading BIOS (default)
N/A
ALC267/268
==========
......@@ -350,7 +338,6 @@ STAC92HD83*
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
dell-vostro-3500 Dell Vostro 3500 laptop
hp HP laptops with (inverted) mute-LED
hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)
......
Documentation/sound/alsa/compress_offload.txt 0 → 100644
浏览文件 @ a429638c
compress_offload.txt
=====================
Pierre-Louis.Bossart <pierre-louis.bossart@linux.intel.com>
Vinod Koul <vinod.koul@linux.intel.com>
Overview
Since its early days, the ALSA API was defined with PCM support or
constant bitrates payloads such as IEC61937 in mind. Arguments and
returned values in frames are the norm, making it a challenge to
extend the existing API to compressed data streams.
In recent years, audio digital signal processors (DSP) were integrated
in system-on-chip designs, and DSPs are also integrated in audio
codecs. Processing compressed data on such DSPs results in a dramatic
reduction of power consumption compared to host-based
processing. Support for such hardware has not been very good in Linux,
mostly because of a lack of a generic API available in the mainline
kernel.
Rather than requiring a compability break with an API change of the
ALSA PCM interface, a new 'Compressed Data' API is introduced to
provide a control and data-streaming interface for audio DSPs.
The design of this API was inspired by the 2-year experience with the
Intel Moorestown SOC, with many corrections required to upstream the
API in the mainline kernel instead of the staging tree and make it
usable by others.
Requirements
The main requirements are:
- separation between byte counts and time. Compressed formats may have
a header per file, per frame, or no header at all. The payload size
may vary from frame-to-frame. As a result, it is not possible to
estimate reliably the duration of audio buffers when handling
compressed data. Dedicated mechanisms are required to allow for
reliable audio-video synchronization, which requires precise
reporting of the number of samples rendered at any given time.
- Handling of multiple formats. PCM data only requires a specification
of the sampling rate, number of channels and bits per sample. In
contrast, compressed data comes in a variety of formats. Audio DSPs
may also provide support for a limited number of audio encoders and
decoders embedded in firmware, or may support more choices through
dynamic download of libraries.
- Focus on main formats. This API provides support for the most
popular formats used for audio and video capture and playback. It is
likely that as audio compression technology advances, new formats
will be added.
- Handling of multiple configurations. Even for a given format like
AAC, some implementations may support AAC multichannel but HE-AAC
stereo. Likewise WMA10 level M3 may require too much memory and cpu
cycles. The new API needs to provide a generic way of listing these
formats.
- Rendering/Grabbing only. This API does not provide any means of
hardware acceleration, where PCM samples are provided back to
user-space for additional processing. This API focuses instead on
streaming compressed data to a DSP, with the assumption that the
decoded samples are routed to a physical output or logical back-end.
- Complexity hiding. Existing user-space multimedia frameworks all
have existing enums/structures for each compressed format. This new
API assumes the existence of a platform-specific compatibility layer
to expose, translate and make use of the capabilities of the audio
DSP, eg. Android HAL or PulseAudio sinks. By construction, regular
applications are not supposed to make use of this API.
Design
The new API shares a number of concepts with with the PCM API for flow
control. Start, pause, resume, drain and stop commands have the same
semantics no matter what the content is.
The concept of memory ring buffer divided in a set of fragments is
borrowed from the ALSA PCM API. However, only sizes in bytes can be
specified.
Seeks/trick modes are assumed to be handled by the host.
The notion of rewinds/forwards is not supported. Data committed to the
ring buffer cannot be invalidated, except when dropping all buffers.
The Compressed Data API does not make any assumptions on how the data
is transmitted to the audio DSP. DMA transfers from main memory to an
embedded audio cluster or to a SPI interface for external DSPs are
possible. As in the ALSA PCM case, a core set of routines is exposed;
each driver implementer will have to write support for a set of
mandatory routines and possibly make use of optional ones.
The main additions are
- get_caps
This routine returns the list of audio formats supported. Querying the
codecs on a capture stream will return encoders, decoders will be
listed for playback streams.
- get_codec_caps For each codec, this routine returns a list of
capabilities. The intent is to make sure all the capabilities
correspond to valid settings, and to minimize the risks of
configuration failures. For example, for a complex codec such as AAC,
the number of channels supported may depend on a specific profile. If
the capabilities were exposed with a single descriptor, it may happen
that a specific combination of profiles/channels/formats may not be
supported. Likewise, embedded DSPs have limited memory and cpu cycles,
it is likely that some implementations make the list of capabilities
dynamic and dependent on existing workloads. In addition to codec
settings, this routine returns the minimum buffer size handled by the
implementation. This information can be a function of the DMA buffer
sizes, the number of bytes required to synchronize, etc, and can be
used by userspace to define how much needs to be written in the ring
buffer before playback can start.
- set_params
This routine sets the configuration chosen for a specific codec. The
most important field in the parameters is the codec type; in most
cases decoders will ignore other fields, while encoders will strictly
comply to the settings
- get_params
This routines returns the actual settings used by the DSP. Changes to
the settings should remain the exception.
- get_timestamp
The timestamp becomes a multiple field structure. It lists the number
of bytes transferred, the number of samples processed and the number
of samples rendered/grabbed. All these values can be used to determine
the avarage bitrate, figure out if the ring buffer needs to be
refilled or the delay due to decoding/encoding/io on the DSP.
Note that the list of codecs/profiles/modes was derived from the
OpenMAX AL specification instead of reinventing the wheel.
Modifications include:
- Addition of FLAC and IEC formats
- Merge of encoder/decoder capabilities
- Profiles/modes listed as bitmasks to make descriptors more compact
- Addition of set_params for decoders (missing in OpenMAX AL)
- Addition of AMR/AMR-WB encoding modes (missing in OpenMAX AL)
- Addition of format information for WMA
- Addition of encoding options when required (derived from OpenMAX IL)
- Addition of rateControlSupported (missing in OpenMAX AL)
Not supported:
- Support for VoIP/circuit-switched calls is not the target of this
API. Support for dynamic bit-rate changes would require a tight
coupling between the DSP and the host stack, limiting power savings.
- Packet-loss concealment is not supported. This would require an
additional interface to let the decoder synthesize data when frames
are lost during transmission. This may be added in the future.
- Volume control/routing is not handled by this API. Devices exposing a
compressed data interface will be considered as regular ALSA devices;
volume changes and routing information will be provided with regular
ALSA kcontrols.
- Embedded audio effects. Such effects should be enabled in the same
manner, no matter if the input was PCM or compressed.
- multichannel IEC encoding. Unclear if this is required.
- Encoding/decoding acceleration is not supported as mentioned
above. It is possible to route the output of a decoder to a capture
stream, or even implement transcoding capabilities. This routing
would be enabled with ALSA kcontrols.
- Audio policy/resource management. This API does not provide any
hooks to query the utilization of the audio DSP, nor any premption
mechanisms.
- No notion of underun/overrun. Since the bytes written are compressed
in nature and data written/read doesn't translate directly to
rendered output in time, this does not deal with underrun/overun and
maybe dealt in user-library
Credits:
- Mark Brown and Liam Girdwood for discussions on the need for this API
- Harsha Priya for her work on intel_sst compressed API
- Rakesh Ughreja for valuable feedback
- Sing Nallasellan, Sikkandar Madar and Prasanna Samaga for
demonstrating and quantifying the benefits of audio offload on a
real platform.
MAINTAINERS
浏览文件 @ a429638c
......@@ -537,6 +537,7 @@ F: sound/soc/codecs/adau*
F: sound/soc/codecs/adav*
F: sound/soc/codecs/ad1*
F: sound/soc/codecs/ssm*
F: sound/soc/codecs/sigmadsp.*
ANALOG DEVICES INC ASOC DRIVERS
L: uclinux-dist-devel@blackfin.uclinux.org
......
arch/arm/mach-omap2/mcbsp.c
浏览文件 @ a429638c
......@@ -156,6 +156,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
else
/* The FIFO has 128 locations */
pdata->buffer_size = 0x80;
} else if (oh->class->rev == MCBSP_CONFIG_TYPE4) {
/* The FIFO has 128 locations for all instances */
pdata->buffer_size = 0x80;
}
if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
......
arch/arm/mach-pxa/corgi.c
浏览文件 @ a429638c
......@@ -435,6 +435,14 @@ static struct platform_device corgiled_device = {
},
};
/*
* Corgi Audio
*/
static struct platform_device corgi_audio_device = {
.name = "corgi-audio",
.id = -1,
};
/*
* MMC/SD Device
*
......@@ -641,6 +649,7 @@ static struct platform_device *devices[] __initdata = {
&corgifb_device,
&corgikbd_device,
&corgiled_device,
&corgi_audio_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
};
......
arch/arm/mach-pxa/eseries.c
浏览文件 @ a429638c
......@@ -528,12 +528,18 @@ static struct platform_device e740_t7l66xb_device = {
.resource = eseries_tmio_resources,
};
static struct platform_device e740_audio_device = {
.name = "e740-audio",
.id = -1,
};
/* ----------------------------------------------------------------------- */
static struct platform_device *e740_devices[] __initdata = {
&e740_fb_device,
&e740_t7l66xb_device,
&e7xx_gpio_vbus,
&e740_audio_device,
};
static void __init e740_init(void)
......@@ -722,12 +728,18 @@ static struct platform_device e750_tc6393xb_device = {
.resource = eseries_tmio_resources,
};
static struct platform_device e750_audio_device = {
.name = "e750-audio",
.id = -1,
};
/* ------------------------------------------------------------- */
static struct platform_device *e750_devices[] __initdata = {
&e750_fb_device,
&e750_tc6393xb_device,
&e7xx_gpio_vbus,
&e750_audio_device,
};
static void __init e750_init(void)
......@@ -929,12 +941,18 @@ static struct platform_device e800_tc6393xb_device = {
.resource = eseries_tmio_resources,
};
static struct platform_device e800_audio_device = {
.name = "e800-audio",
.id = -1,
};
/* ----------------------------------------------------------------------- */
static struct platform_device *e800_devices[] __initdata = {
&e800_fb_device,
&e800_tc6393xb_device,
&e800_gpio_vbus,
&e800_audio_device,
};
static void __init e800_init(void)
......
arch/arm/mach-pxa/poodle.c
浏览文件 @ a429638c
......@@ -158,6 +158,11 @@ static struct scoop_pcmcia_config poodle_pcmcia_config = {
EXPORT_SYMBOL(poodle_scoop_device);
static struct platform_device poodle_audio_device = {
.name = "poodle-audio",
.id = -1,
};
/* LoCoMo device */
static struct resource locomo_resources[] = {
[0] = {
......@@ -407,6 +412,7 @@ static struct platform_device sharpsl_rom_device = {
static struct platform_device *devices[] __initdata = {
&poodle_locomo_device,
&poodle_scoop_device,
&poodle_audio_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
};
......
arch/arm/mach-pxa/stargate2.c
浏览文件 @ a429638c
......@@ -593,10 +593,16 @@ static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
.udc_command = sg2_udc_command,
};
static struct platform_device imote2_audio_device = {
.name = "imote2-audio",
.id = -1,
};
static struct platform_device *imote2_devices[] = {
&stargate2_flash_device,
&imote2_leds,
&sht15,
&imote2_audio_device,
};
static void __init imote2_init(void)
......
arch/arm/mach-pxa/tosa.c
浏览文件 @ a429638c
......@@ -889,6 +889,11 @@ static struct platform_device wm9712_device = {
.id = -1,
};
static struct platform_device tosa_audio_device = {
.name = "tosa-audio",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
......@@ -901,6 +906,7 @@ static struct platform_device *devices[] __initdata = {
&sharpsl_rom_device,
&wm9712_device,
&tosa_gpio_vbus,
&tosa_audio_device,
};
static void tosa_poweroff(void)
......
arch/arm/mach-s3c64xx/mach-crag6410.c
浏览文件 @ a429638c
......@@ -286,8 +286,8 @@ static struct platform_device lowland_device = {
.id = -1,
};
static struct platform_device speyside_wm8962_device = {
.name = "speyside-wm8962",
static struct platform_device tobermory_device = {
.name = "tobermory",
.id = -1,
};
......@@ -347,7 +347,7 @@ static struct platform_device *crag6410_devices[] __initdata = {
&crag6410_lcd_powerdev,
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
&tobermory_device,
&littlemill_device,
&lowland_device,
&wallvdd_device,
......
arch/arm/mach-shmobile/board-ap4evb.c
浏览文件 @ a429638c
......@@ -762,9 +762,22 @@ static struct platform_device fsi_device = {
},
};
static struct fsi_ak4642_info fsi2_ak4643_info = {
.name = "AK4643",
.card = "FSI2A-AK4643",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0013",
.platform = "sh_fsi2",
.id = FSI_PORT_A,
};
static struct platform_device fsi_ak4643_device = {
.name = "sh_fsi2_a_ak4643",
.name = "fsi-ak4642-audio",
.dev = {
.platform_data = &fsi_info,
},
};
static struct sh_mobile_meram_cfg hdmi_meram_cfg = {
.icb[0] = {
.marker_icb = 30,
......
arch/arm/mach-shmobile/board-mackerel.c
浏览文件 @ a429638c
......@@ -990,8 +990,20 @@ static struct platform_device fsi_device = {
},
};
static struct fsi_ak4642_info fsi2_ak4643_info = {
.name = "AK4643",
.card = "FSI2A-AK4643",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0013",
.platform = "sh_fsi2",
.id = FSI_PORT_A,
};
static struct platform_device fsi_ak4643_device = {
.name = "sh_fsi2_a_ak4643",
.name = "fsi-ak4642-audio",
.dev = {
.platform_data = &fsi2_ak4643_info,
},
};
/*
......
arch/arm/mach-tegra/board-harmony.c
浏览文件 @ a429638c
......@@ -90,11 +90,11 @@ static struct wm8903_platform_data harmony_wm8903_pdata = {
.micdet_delay = 100,
.gpio_base = HARMONY_GPIO_WM8903(0),
.gpio_cfg = {
WM8903_GPIO_NO_CONFIG,
WM8903_GPIO_NO_CONFIG,
0,
WM8903_GPIO_NO_CONFIG,
WM8903_GPIO_NO_CONFIG,
0,
WM8903_GPIO_CONFIG_ZERO,
0,
0,
},
};
......
arch/arm/mach-tegra/board-seaboard.c
浏览文件 @ a429638c
......@@ -172,11 +172,11 @@ static struct wm8903_platform_data wm8903_pdata = {
.micdet_delay = 100,
.gpio_base = SEABOARD_GPIO_WM8903(0),
.gpio_cfg = {
WM8903_GPIO_NO_CONFIG,
WM8903_GPIO_NO_CONFIG,
0,
WM8903_GPIO_NO_CONFIG,
WM8903_GPIO_NO_CONFIG,
0,
WM8903_GPIO_CONFIG_ZERO,
0,
0,
},
};
......
arch/sh/boards/mach-se/7724/setup.c
浏览文件 @ a429638c
......@@ -303,8 +303,20 @@ static struct platform_device fsi_device = {
},
};
static struct fsi_ak4642_info fsi_ak4642_info = {
.name = "AK4642",
.card = "FSIA-AK4642",
.cpu_dai = "fsia-dai",
.codec = "ak4642-codec.0-0012",
.platform = "sh_fsi.0",
.id = FSI_PORT_A,
};
static struct platform_device fsi_ak4642_device = {
.name = "sh_fsi_a_ak4642",
.name = "fsi-ak4642-audio",
.dev = {
.platform_data = &fsi_ak4642_info,
},
};
/* KEYSC in SoC (Needs SW33-2 set to ON) */
......
drivers/firmware/Kconfig
浏览文件 @ a429638c
......@@ -145,18 +145,6 @@ config ISCSI_IBFT
detect iSCSI boot parameters dynamically during system boot, say Y.
Otherwise, say N.
config SIGMA
tristate "SigmaStudio firmware loader"
depends on I2C
select CRC32
default n
help
Enable helper functions for working with Analog Devices SigmaDSP
parts and binary firmwares produced by Analog Devices SigmaStudio.
If unsure, say N here. Drivers that need these helpers will select
this option automatically.
source "drivers/firmware/google/Kconfig"
endmenu
drivers/firmware/Makefile
浏览文件 @ a429638c
......@@ -12,6 +12,5 @@ obj-$(CONFIG_DMIID) += dmi-id.o
obj-$(CONFIG_ISCSI_IBFT_FIND) += iscsi_ibft_find.o
obj-$(CONFIG_ISCSI_IBFT) += iscsi_ibft.o
obj-$(CONFIG_FIRMWARE_MEMMAP) += memmap.o
obj-$(CONFIG_SIGMA) += sigma.o
obj-$(CONFIG_GOOGLE_FIRMWARE) += google/
drivers/mfd/Kconfig
浏览文件 @ a429638c
......@@ -505,6 +505,7 @@ config MFD_WM8994
bool "Support Wolfson Microelectronics WM8994"
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
depends on I2C=y && GENERIC_HARDIRQS
help
The WM8994 is a highly integrated hi-fi CODEC designed for
......
drivers/mfd/Makefile
浏览文件 @ a429638c
......@@ -31,7 +31,7 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
wm8350-objs += wm8350-irq.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o
obj-$(CONFIG_MFD_WM8994) += wm8994-core.o wm8994-irq.o wm8994-regmap.o
obj-$(CONFIG_TPS6105X) += tps6105x.o
obj-$(CONFIG_TPS65010) += tps65010.o
......
drivers/mfd/wm8994-core.c
浏览文件 @ a429638c
......@@ -28,11 +28,7 @@
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>
static int wm8994_read(struct wm8994 *wm8994, unsigned short reg,
int bytes, void *dest)
{
return regmap_raw_read(wm8994->regmap, reg, dest, bytes);
}
#include "wm8994.h"
/**
* wm8994_reg_read: Read a single WM8994 register.
......@@ -68,12 +64,6 @@ int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
return regmap_bulk_read(wm8994->regmap, reg, buf, count);
}
static int wm8994_write(struct wm8994 *wm8994, unsigned short reg,
int bytes, const void *src)
{
return regmap_raw_write(wm8994->regmap, reg, src, bytes);
}
/**
* wm8994_reg_write: Write a single WM8994 register.
*
......@@ -252,6 +242,20 @@ static int wm8994_suspend(struct device *dev)
break;
}
switch (wm8994->type) {
case WM1811:
ret = wm8994_reg_read(wm8994, WM8994_ANTIPOP_2);
if (ret < 0) {
dev_err(dev, "Failed to read jackdet: %d\n", ret);
} else if (ret & WM1811_JACKDET_MODE_MASK) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
break;
default:
break;
}
/* Disable LDO pulldowns while the device is suspended if we
* don't know that something will be driving them. */
if (!wm8994->ldo_ena_always_driven)
......@@ -259,25 +263,14 @@ static int wm8994_suspend(struct device *dev)
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
/* GPIO configuration state is saved here since we may be configuring
* the GPIO alternate functions even if we're not using the gpiolib
* driver for them.
*/
ret = wm8994_read(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
&wm8994->gpio_regs);
if (ret < 0)
dev_err(dev, "Failed to save GPIO registers: %d\n", ret);
/* For similar reasons we also stash the regulator states */
ret = wm8994_read(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
&wm8994->ldo_regs);
if (ret < 0)
dev_err(dev, "Failed to save LDO registers: %d\n", ret);
/* Explicitly put the device into reset in case regulators
* don't get disabled in order to ensure consistent restart.
*/
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET, 0x8994);
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
regcache_cache_only(wm8994->regmap, true);
regcache_mark_dirty(wm8994->regmap);
wm8994->suspended = true;
......@@ -294,7 +287,7 @@ static int wm8994_suspend(struct device *dev)
static int wm8994_resume(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret, i;
int ret;
/* We may have lied to the PM core about suspending */
if (!wm8994->suspended)
......@@ -307,27 +300,13 @@ static int wm8994_resume(struct device *dev)
return ret;
}
/* Write register at a time as we use the cache on the CPU so store
* it in native endian.
*/
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
ret = wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK
+ i, wm8994->irq_masks_cur[i]);
if (ret < 0)
dev_err(dev, "Failed to restore interrupt masks: %d\n",
ret);
regcache_cache_only(wm8994->regmap, false);
ret = regcache_sync(wm8994->regmap);
if (ret != 0) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
goto err_enable;
}
ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
&wm8994->ldo_regs);
if (ret < 0)
dev_err(dev, "Failed to restore LDO registers: %d\n", ret);
ret = wm8994_write(wm8994, WM8994_GPIO_1, WM8994_NUM_GPIO_REGS * 2,
&wm8994->gpio_regs);
if (ret < 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
/* Disable LDO pulldowns while the device is active */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
......@@ -336,6 +315,11 @@ static int wm8994_resume(struct device *dev)
wm8994->suspended = false;
return 0;
err_enable:
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
return ret;
}
#endif
......@@ -361,19 +345,16 @@ static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
}
#endif
static struct regmap_config wm8994_regmap_config = {
.reg_bits = 16,
.val_bits = 16,
};
/*
* Instantiate the generic non-control parts of the device.
*/
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
{
struct wm8994_pdata *pdata = wm8994->dev->platform_data;
struct regmap_config *regmap_config;
const char *devname;
int ret, i;
int pulls = 0;
dev_set_drvdata(wm8994->dev, wm8994);
......@@ -402,9 +383,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
goto err_regmap;
}
wm8994->supplies = kzalloc(sizeof(struct regulator_bulk_data) *
wm8994->num_supplies,
GFP_KERNEL);
wm8994->supplies = devm_kzalloc(wm8994->dev,
sizeof(struct regulator_bulk_data) *
wm8994->num_supplies, GFP_KERNEL);
if (!wm8994->supplies) {
ret = -ENOMEM;
goto err_regmap;
......@@ -432,7 +413,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
wm8994->supplies);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
goto err_supplies;
goto err_regmap;
}
ret = regulator_bulk_enable(wm8994->num_supplies,
......@@ -482,25 +463,54 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
ret);
goto err_enable;
}
wm8994->revision = ret;
switch (wm8994->type) {
case WM8994:
switch (ret) {
switch (wm8994->revision) {
case 0:
case 1:
dev_warn(wm8994->dev,
"revision %c not fully supported\n",
'A' + ret);
'A' + wm8994->revision);
break;
default:
break;
}
break;
case WM1811:
/* Revision C did not change the relevant layer */
if (wm8994->revision > 1)
wm8994->revision++;
break;
default:
break;
}
dev_info(wm8994->dev, "%s revision %c\n", devname, 'A' + ret);
dev_info(wm8994->dev, "%s revision %c\n", devname,
'A' + wm8994->revision);
switch (wm8994->type) {
case WM1811:
regmap_config = &wm1811_regmap_config;
break;
case WM8994:
regmap_config = &wm8994_regmap_config;
break;
case WM8958:
regmap_config = &wm8958_regmap_config;
break;
default:
dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
return -EINVAL;
}
ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
ret);
return ret;
}
if (pdata) {
wm8994->irq_base = pdata->irq_base;
......@@ -516,12 +526,16 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
}
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
if (pdata->spkmode_pu)
pulls |= WM8994_SPKMODE_PU;
}
/* Disable LDO pulldowns while the device is active */
/* Disable unneeded pulls */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
0);
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
pulls);
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
......@@ -560,12 +574,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
wm8994->supplies);
err_get:
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
err_supplies:
kfree(wm8994->supplies);
err_regmap:
regmap_exit(wm8994->regmap);
mfd_remove_devices(wm8994->dev);
kfree(wm8994);
return ret;
}
......@@ -577,18 +588,24 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
kfree(wm8994->supplies);
regmap_exit(wm8994->regmap);
kfree(wm8994);
}
static const struct of_device_id wm8994_of_match[] = {
{ .compatible = "wlf,wm1811", },
{ .compatible = "wlf,wm8994", },
{ .compatible = "wlf,wm8958", },
{ }
};
MODULE_DEVICE_TABLE(of, wm8994_of_match);
static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8994 *wm8994;
int ret;
wm8994 = kzalloc(sizeof(struct wm8994), GFP_KERNEL);
wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
if (wm8994 == NULL)
return -ENOMEM;
......@@ -597,12 +614,11 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
wm8994->irq = i2c->irq;
wm8994->type = id->driver_data;
wm8994->regmap = regmap_init_i2c(i2c, &wm8994_regmap_config);
wm8994->regmap = regmap_init_i2c(i2c, &wm8994_base_regmap_config);
if (IS_ERR(wm8994->regmap)) {
ret = PTR_ERR(wm8994->regmap);
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
ret);
kfree(wm8994);
return ret;
}
......@@ -620,6 +636,7 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
static const struct i2c_device_id wm8994_i2c_id[] = {
{ "wm1811", WM1811 },
{ "wm1811a", WM1811 },
{ "wm8994", WM8994 },
{ "wm8958", WM8958 },
{ }
......@@ -634,6 +651,7 @@ static struct i2c_driver wm8994_i2c_driver = {
.name = "wm8994",
.owner = THIS_MODULE,
.pm = &wm8994_pm_ops,
.of_match_table = wm8994_of_match,
},
.probe = wm8994_i2c_probe,
.remove = wm8994_i2c_remove,
......
drivers/mfd/wm8994-irq.c
浏览文件 @ a429638c
......@@ -18,248 +18,127 @@
#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/registers.h>
#include <linux/delay.h>
struct wm8994_irq_data {
int reg;
int mask;
};
static struct wm8994_irq_data wm8994_irqs[] = {
static struct regmap_irq wm8994_irqs[] = {
[WM8994_IRQ_TEMP_SHUT] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_TEMP_SHUT_EINT,
},
[WM8994_IRQ_MIC1_DET] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_MIC1_DET_EINT,
},
[WM8994_IRQ_MIC1_SHRT] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_MIC1_SHRT_EINT,
},
[WM8994_IRQ_MIC2_DET] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_MIC2_DET_EINT,
},
[WM8994_IRQ_MIC2_SHRT] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_MIC2_SHRT_EINT,
},
[WM8994_IRQ_FLL1_LOCK] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_FLL1_LOCK_EINT,
},
[WM8994_IRQ_FLL2_LOCK] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_FLL2_LOCK_EINT,
},
[WM8994_IRQ_SRC1_LOCK] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_SRC1_LOCK_EINT,
},
[WM8994_IRQ_SRC2_LOCK] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_SRC2_LOCK_EINT,
},
[WM8994_IRQ_AIF1DRC1_SIG_DET] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_AIF1DRC1_SIG_DET,
},
[WM8994_IRQ_AIF1DRC2_SIG_DET] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_AIF1DRC2_SIG_DET_EINT,
},
[WM8994_IRQ_AIF2DRC_SIG_DET] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_AIF2DRC_SIG_DET_EINT,
},
[WM8994_IRQ_FIFOS_ERR] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_FIFOS_ERR_EINT,
},
[WM8994_IRQ_WSEQ_DONE] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_WSEQ_DONE_EINT,
},
[WM8994_IRQ_DCS_DONE] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_DCS_DONE_EINT,
},
[WM8994_IRQ_TEMP_WARN] = {
.reg = 2,
.reg_offset = 1,
.mask = WM8994_TEMP_WARN_EINT,
},
[WM8994_IRQ_GPIO(1)] = {
.reg = 1,
.mask = WM8994_GP1_EINT,
},
[WM8994_IRQ_GPIO(2)] = {
.reg = 1,
.mask = WM8994_GP2_EINT,
},
[WM8994_IRQ_GPIO(3)] = {
.reg = 1,
.mask = WM8994_GP3_EINT,
},
[WM8994_IRQ_GPIO(4)] = {
.reg = 1,
.mask = WM8994_GP4_EINT,
},
[WM8994_IRQ_GPIO(5)] = {
.reg = 1,
.mask = WM8994_GP5_EINT,
},
[WM8994_IRQ_GPIO(6)] = {
.reg = 1,
.mask = WM8994_GP6_EINT,
},
[WM8994_IRQ_GPIO(7)] = {
.reg = 1,
.mask = WM8994_GP7_EINT,
},
[WM8994_IRQ_GPIO(8)] = {
.reg = 1,
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(9)] = {
.reg = 1,
.mask = WM8994_GP8_EINT,
},
[WM8994_IRQ_GPIO(10)] = {
.reg = 1,
.mask = WM8994_GP10_EINT,
},
[WM8994_IRQ_GPIO(11)] = {
.reg = 1,
.mask = WM8994_GP11_EINT,
},
};
static inline int irq_data_to_status_reg(struct wm8994_irq_data *irq_data)
{
return WM8994_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
}
static inline int irq_data_to_mask_reg(struct wm8994_irq_data *irq_data)
{
return WM8994_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
}
static inline struct wm8994_irq_data *irq_to_wm8994_irq(struct wm8994 *wm8994,
int irq)
{
return &wm8994_irqs[irq - wm8994->irq_base];
}
static void wm8994_irq_lock(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
mutex_lock(&wm8994->irq_lock);
}
static void wm8994_irq_sync_unlock(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
int i;
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
/* If there's been a change in the mask write it back
* to the hardware. */
if (wm8994->irq_masks_cur[i] != wm8994->irq_masks_cache[i]) {
wm8994->irq_masks_cache[i] = wm8994->irq_masks_cur[i];
wm8994_reg_write(wm8994,
WM8994_INTERRUPT_STATUS_1_MASK + i,
wm8994->irq_masks_cur[i]);
}
}
mutex_unlock(&wm8994->irq_lock);
}
static void wm8994_irq_enable(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994,
data->irq);
wm8994->irq_masks_cur[irq_data->reg - 1] &= ~irq_data->mask;
}
static void wm8994_irq_disable(struct irq_data *data)
{
struct wm8994 *wm8994 = irq_data_get_irq_chip_data(data);
struct wm8994_irq_data *irq_data = irq_to_wm8994_irq(wm8994,
data->irq);
wm8994->irq_masks_cur[irq_data->reg - 1] |= irq_data->mask;
}
static struct regmap_irq_chip wm8994_irq_chip = {
.name = "wm8994",
.irqs = wm8994_irqs,
.num_irqs = ARRAY_SIZE(wm8994_irqs),
static struct irq_chip wm8994_irq_chip = {
.name = "wm8994",
.irq_bus_lock = wm8994_irq_lock,
.irq_bus_sync_unlock = wm8994_irq_sync_unlock,
.irq_disable = wm8994_irq_disable,
.irq_enable = wm8994_irq_enable,
.num_regs = 2,
.status_base = WM8994_INTERRUPT_STATUS_1,
.mask_base = WM8994_INTERRUPT_STATUS_1_MASK,
.ack_base = WM8994_INTERRUPT_STATUS_1,
};
/* The processing of the primary interrupt occurs in a thread so that
* we can interact with the device over I2C or SPI. */
static irqreturn_t wm8994_irq_thread(int irq, void *data)
{
struct wm8994 *wm8994 = data;
unsigned int i;
u16 status[WM8994_NUM_IRQ_REGS];
int ret;
ret = wm8994_bulk_read(wm8994, WM8994_INTERRUPT_STATUS_1,
WM8994_NUM_IRQ_REGS, status);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read interrupt status: %d\n",
ret);
return IRQ_NONE;
}
/* Bit swap and apply masking */
for (i = 0; i < WM8994_NUM_IRQ_REGS; i++) {
status[i] = be16_to_cpu(status[i]);
status[i] &= ~wm8994->irq_masks_cur[i];
}
/* Ack any unmasked IRQs */
for (i = 0; i < ARRAY_SIZE(status); i++) {
if (status[i])
wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1 + i,
status[i]);
}
/* Report */
for (i = 0; i < ARRAY_SIZE(wm8994_irqs); i++) {
if (status[wm8994_irqs[i].reg - 1] & wm8994_irqs[i].mask)
handle_nested_irq(wm8994->irq_base + i);
}
return IRQ_HANDLED;
}
int wm8994_irq_init(struct wm8994 *wm8994)
{
int i, cur_irq, ret;
mutex_init(&wm8994->irq_lock);
/* Mask the individual interrupt sources */
for (i = 0; i < ARRAY_SIZE(wm8994->irq_masks_cur); i++) {
wm8994->irq_masks_cur[i] = 0xffff;
wm8994->irq_masks_cache[i] = 0xffff;
wm8994_reg_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK + i,
0xffff);
}
int ret;
if (!wm8994->irq) {
dev_warn(wm8994->dev,
......@@ -274,30 +153,12 @@ int wm8994_irq_init(struct wm8994 *wm8994)
return 0;
}
/* Register them with genirq */
for (cur_irq = wm8994->irq_base;
cur_irq < ARRAY_SIZE(wm8994_irqs) + wm8994->irq_base;
cur_irq++) {
irq_set_chip_data(cur_irq, wm8994);
irq_set_chip_and_handler(cur_irq, &wm8994_irq_chip,
handle_edge_irq);
irq_set_nested_thread(cur_irq, 1);
/* ARM needs us to explicitly flag the IRQ as valid
* and will set them noprobe when we do so. */
#ifdef CONFIG_ARM
set_irq_flags(cur_irq, IRQF_VALID);
#else
irq_set_noprobe(cur_irq);
#endif
}
ret = request_threaded_irq(wm8994->irq, NULL, wm8994_irq_thread,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
"wm8994", wm8994);
ret = regmap_add_irq_chip(wm8994->regmap, wm8994->irq,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
wm8994->irq_base, &wm8994_irq_chip,
&wm8994->irq_data);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to request IRQ %d: %d\n",
wm8994->irq, ret);
dev_err(wm8994->dev, "Failed to register IRQ chip: %d\n", ret);
return ret;
}
......@@ -309,6 +170,5 @@ int wm8994_irq_init(struct wm8994 *wm8994)
void wm8994_irq_exit(struct wm8994 *wm8994)
{
if (wm8994->irq)
free_irq(wm8994->irq, wm8994);
regmap_del_irq_chip(wm8994->irq, wm8994->irq_data);
}
drivers/mfd/wm8994-regmap.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
drivers/mfd/wm8994.h 0 → 100644
浏览文件 @ a429638c
/*
* wm8994.h -- WM8994 MFD internals
*
* Copyright 2011 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MFD_WM8994_H__
#define __MFD_WM8994_H__
#include <linux/regmap.h>
extern struct regmap_config wm1811_regmap_config;
extern struct regmap_config wm8994_regmap_config;
extern struct regmap_config wm8958_regmap_config;
extern struct regmap_config wm8994_base_regmap_config;
#endif
include/linux/mfd/wm8994/core.h
浏览文件 @ a429638c
......@@ -15,6 +15,7 @@
#ifndef __MFD_WM8994_CORE_H__
#define __MFD_WM8994_CORE_H__
#include <linux/mutex.h>
#include <linux/interrupt.h>
enum wm8994_type {
......@@ -55,6 +56,7 @@ struct wm8994 {
struct mutex irq_lock;
enum wm8994_type type;
int revision;
struct device *dev;
struct regmap *regmap;
......@@ -65,13 +67,10 @@ struct wm8994 {
int irq_base;
int irq;
u16 irq_masks_cur[WM8994_NUM_IRQ_REGS];
u16 irq_masks_cache[WM8994_NUM_IRQ_REGS];
struct regmap_irq_chip_data *irq_data;
/* Used over suspend/resume */
bool suspended;
u16 ldo_regs[WM8994_NUM_LDO_REGS];
u16 gpio_regs[WM8994_NUM_GPIO_REGS];
struct regulator_dev *dbvdd;
int num_supplies;
......
include/linux/mfd/wm8994/pdata.h
浏览文件 @ a429638c
......@@ -23,7 +23,7 @@ struct wm8994_ldo_pdata {
int enable;
const char *supply;
struct regulator_init_data *init_data;
const struct regulator_init_data *init_data;
};
#define WM8994_CONFIGURE_GPIO 0x10000
......@@ -113,6 +113,23 @@ struct wm8958_enh_eq_cfg {
u16 regs[WM8958_ENH_EQ_REGS];
};
/**
* Microphone detection rates, used to tune response rates and power
* consumption for WM8958/WM1811 microphone detection.
*
* @sysclk: System clock rate to use this configuration for.
* @idle: True if this configuration should use when no accessory is detected,
* false otherwise.
* @start: Value for MICD_BIAS_START_TIME register field (not shifted).
* @rate: Value for MICD_RATE register field (not shifted).
*/
struct wm8958_micd_rate {
int sysclk;
bool idle;
int start;
int rate;
};
struct wm8994_pdata {
int gpio_base;
......@@ -144,6 +161,9 @@ struct wm8994_pdata {
int num_enh_eq_cfgs;
struct wm8958_enh_eq_cfg *enh_eq_cfgs;
int num_micd_rates;
struct wm8958_micd_rate *micd_rates;
/* LINEOUT can be differential or single ended */
unsigned int lineout1_diff:1;
unsigned int lineout2_diff:1;
......@@ -168,12 +188,21 @@ struct wm8994_pdata {
/* WM8958 microphone bias configuration */
int micbias[2];
/* WM8958 microphone detection ranges */
u16 micd_lvl_sel;
/* Disable the internal pull downs on the LDOs if they are
* always driven (eg, connected to an always on supply or
* GPIO that always drives an output. If they float power
* consumption will rise.
*/
bool ldo_ena_always_driven;
/*
* SPKMODE must be pulled internally by the device on this
* system.
*/
bool spkmode_pu;
};
#endif
include/linux/mfd/wm8994/registers.h
浏览文件 @ a429638c
......@@ -95,11 +95,15 @@
#define WM8994_FLL1_CONTROL_3 0x222
#define WM8994_FLL1_CONTROL_4 0x223
#define WM8994_FLL1_CONTROL_5 0x224
#define WM8958_FLL1_EFS_1 0x226
#define WM8958_FLL1_EFS_2 0x227
#define WM8994_FLL2_CONTROL_1 0x240
#define WM8994_FLL2_CONTROL_2 0x241
#define WM8994_FLL2_CONTROL_3 0x242
#define WM8994_FLL2_CONTROL_4 0x243
#define WM8994_FLL2_CONTROL_5 0x244
#define WM8958_FLL2_EFS_1 0x246
#define WM8958_FLL2_EFS_2 0x247
#define WM8994_AIF1_CONTROL_1 0x300
#define WM8994_AIF1_CONTROL_2 0x301
#define WM8994_AIF1_MASTER_SLAVE 0x302
......@@ -116,6 +120,7 @@
#define WM8994_AIF2DAC_LRCLK 0x315
#define WM8994_AIF2DAC_DATA 0x316
#define WM8994_AIF2ADC_DATA 0x317
#define WM1811_AIF2TX_CONTROL 0x318
#define WM8958_AIF3_CONTROL_1 0x320
#define WM8958_AIF3_CONTROL_2 0x321
#define WM8958_AIF3DAC_DATA 0x322
......@@ -166,6 +171,7 @@
#define WM8994_AIF1_DAC1_EQ_BAND_5_A 0x491
#define WM8994_AIF1_DAC1_EQ_BAND_5_B 0x492
#define WM8994_AIF1_DAC1_EQ_BAND_5_PG 0x493
#define WM8994_AIF1_DAC1_EQ_BAND_1_C 0x494
#define WM8994_AIF1_DAC2_EQ_GAINS_1 0x4A0
#define WM8994_AIF1_DAC2_EQ_GAINS_2 0x4A1
#define WM8994_AIF1_DAC2_EQ_BAND_1_A 0x4A2
......@@ -186,6 +192,7 @@
#define WM8994_AIF1_DAC2_EQ_BAND_5_A 0x4B1
#define WM8994_AIF1_DAC2_EQ_BAND_5_B 0x4B2
#define WM8994_AIF1_DAC2_EQ_BAND_5_PG 0x4B3
#define WM8994_AIF1_DAC2_EQ_BAND_1_C 0x4B4
#define WM8994_AIF2_ADC_LEFT_VOLUME 0x500
#define WM8994_AIF2_ADC_RIGHT_VOLUME 0x501
#define WM8994_AIF2_DAC_LEFT_VOLUME 0x502
......@@ -219,6 +226,7 @@
#define WM8994_AIF2_EQ_BAND_5_A 0x591
#define WM8994_AIF2_EQ_BAND_5_B 0x592
#define WM8994_AIF2_EQ_BAND_5_PG 0x593
#define WM8994_AIF2_EQ_BAND_1_C 0x594
#define WM8994_DAC1_MIXER_VOLUMES 0x600
#define WM8994_DAC1_LEFT_MIXER_ROUTING 0x601
#define WM8994_DAC1_RIGHT_MIXER_ROUTING 0x602
......@@ -242,6 +250,7 @@
#define WM8994_GPIO_4 0x703
#define WM8994_GPIO_5 0x704
#define WM8994_GPIO_6 0x705
#define WM1811_JACKDET_CTRL 0x705
#define WM8994_GPIO_7 0x706
#define WM8994_GPIO_8 0x707
#define WM8994_GPIO_9 0x708
......@@ -264,7 +273,43 @@
#define WM8958_DSP2_RELEASETIME 0xA03
#define WM8958_DSP2_VERMAJMIN 0xA04
#define WM8958_DSP2_VERBUILD 0xA05
#define WM8958_DSP2_TESTREG 0xA06
#define WM8958_DSP2_XORREG 0xA07
#define WM8958_DSP2_SHIFTMAXX 0xA08
#define WM8958_DSP2_SHIFTMAXY 0xA09
#define WM8958_DSP2_SHIFTMAXZ 0xA0A
#define WM8958_DSP2_SHIFTMAXEXTLO 0xA0B
#define WM8958_DSP2_AESSELECT 0xA0C
#define WM8958_DSP2_EXECCONTROL 0xA0D
#define WM8958_DSP2_SAMPLEBREAK 0xA0E
#define WM8958_DSP2_COUNTBREAK 0xA0F
#define WM8958_DSP2_INTSTATUS 0xA10
#define WM8958_DSP2_EVENTSTATUS 0xA11
#define WM8958_DSP2_INTMASK 0xA12
#define WM8958_DSP2_CONFIGDWIDTH 0xA13
#define WM8958_DSP2_CONFIGINSTR 0xA14
#define WM8958_DSP2_CONFIGDMEM 0xA15
#define WM8958_DSP2_CONFIGDELAYS 0xA16
#define WM8958_DSP2_CONFIGNUMIO 0xA17
#define WM8958_DSP2_CONFIGEXTDEPTH 0xA18
#define WM8958_DSP2_CONFIGMULTIPLIER 0xA19
#define WM8958_DSP2_CONFIGCTRLDWIDTH 0xA1A
#define WM8958_DSP2_CONFIGPIPELINE 0xA1B
#define WM8958_DSP2_SHIFTMAXEXTHI 0xA1C
#define WM8958_DSP2_SWVERSIONREG 0xA1D
#define WM8958_DSP2_CONFIGXMEM 0xA1E
#define WM8958_DSP2_CONFIGYMEM 0xA1F
#define WM8958_DSP2_CONFIGZMEM 0xA20
#define WM8958_FW_BUILD_1 0x2000
#define WM8958_FW_BUILD_0 0x2001
#define WM8958_FW_ID_1 0x2002
#define WM8958_FW_ID_0 0x2003
#define WM8958_FW_MAJOR_1 0x2004
#define WM8958_FW_MAJOR_0 0x2005
#define WM8958_FW_MINOR_1 0x2006
#define WM8958_FW_MINOR_0 0x2007
#define WM8958_FW_PATCH_1 0x2008
#define WM8958_FW_PATCH_0 0x2009
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_1 0x2200
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C1_2 0x2201
#define WM8958_MBC_BAND_2_LOWER_CUTOFF_C2_1 0x2202
......@@ -333,6 +378,14 @@
#define WM8958_MBC_B2_PG2_2 0x242D
#define WM8958_MBC_B1_PG2_1 0x242E
#define WM8958_MBC_B1_PG2_2 0x242F
#define WM8958_MBC_CROSSOVER_1 0x2600
#define WM8958_MBC_CROSSOVER_2 0x2601
#define WM8958_MBC_HPF_1 0x2602
#define WM8958_MBC_HPF_2 0x2603
#define WM8958_MBC_LPF_1 0x2606
#define WM8958_MBC_LPF_2 0x2607
#define WM8958_MBC_RMS_LIMIT_1 0x260A
#define WM8958_MBC_RMS_LIMIT_2 0x260B
#define WM8994_WRITE_SEQUENCER_0 0x3000
#define WM8994_WRITE_SEQUENCER_1 0x3001
#define WM8994_WRITE_SEQUENCER_2 0x3002
......@@ -1852,6 +1905,9 @@
/*
* R57 (0x39) - AntiPOP (2)
*/
#define WM1811_JACKDET_MODE_MASK 0x0180 /* JACKDET_MODE - [8:7] */
#define WM1811_JACKDET_MODE_SHIFT 7 /* JACKDET_MODE - [8:7] */
#define WM1811_JACKDET_MODE_WIDTH 2 /* JACKDET_MODE - [8:7] */
#define WM8994_MICB2_DISCH 0x0100 /* MICB2_DISCH */
#define WM8994_MICB2_DISCH_MASK 0x0100 /* MICB2_DISCH */
#define WM8994_MICB2_DISCH_SHIFT 8 /* MICB2_DISCH */
......@@ -2389,6 +2445,10 @@
/*
* R548 (0x224) - FLL1 Control (5)
*/
#define WM8958_FLL1_BYP 0x8000 /* FLL1_BYP */
#define WM8958_FLL1_BYP_MASK 0x8000 /* FLL1_BYP */
#define WM8958_FLL1_BYP_SHIFT 15 /* FLL1_BYP */
#define WM8958_FLL1_BYP_WIDTH 1 /* FLL1_BYP */
#define WM8994_FLL1_FRC_NCO_VAL_MASK 0x1F80 /* FLL1_FRC_NCO_VAL - [12:7] */
#define WM8994_FLL1_FRC_NCO_VAL_SHIFT 7 /* FLL1_FRC_NCO_VAL - [12:7] */
#define WM8994_FLL1_FRC_NCO_VAL_WIDTH 6 /* FLL1_FRC_NCO_VAL - [12:7] */
......@@ -2403,6 +2463,24 @@
#define WM8994_FLL1_REFCLK_SRC_SHIFT 0 /* FLL1_REFCLK_SRC - [1:0] */
#define WM8994_FLL1_REFCLK_SRC_WIDTH 2 /* FLL1_REFCLK_SRC - [1:0] */
/*
* R550 (0x226) - FLL1 EFS 1
*/
#define WM8958_FLL1_LAMBDA_MASK 0xFFFF /* FLL1_LAMBDA - [15:0] */
#define WM8958_FLL1_LAMBDA_SHIFT 0 /* FLL1_LAMBDA - [15:0] */
#define WM8958_FLL1_LAMBDA_WIDTH 16 /* FLL1_LAMBDA - [15:0] */
/*
* R551 (0x227) - FLL1 EFS 2
*/
#define WM8958_FLL1_LFSR_SEL_MASK 0x0006 /* FLL1_LFSR_SEL - [2:1] */
#define WM8958_FLL1_LFSR_SEL_SHIFT 1 /* FLL1_LFSR_SEL - [2:1] */
#define WM8958_FLL1_LFSR_SEL_WIDTH 2 /* FLL1_LFSR_SEL - [2:1] */
#define WM8958_FLL1_EFS_ENA 0x0001 /* FLL1_EFS_ENA */
#define WM8958_FLL1_EFS_ENA_MASK 0x0001 /* FLL1_EFS_ENA */
#define WM8958_FLL1_EFS_ENA_SHIFT 0 /* FLL1_EFS_ENA */
#define WM8958_FLL1_EFS_ENA_WIDTH 1 /* FLL1_EFS_ENA */
/*
* R576 (0x240) - FLL2 Control (1)
*/
......@@ -2452,6 +2530,10 @@
/*
* R580 (0x244) - FLL2 Control (5)
*/
#define WM8958_FLL2_BYP 0x8000 /* FLL2_BYP */
#define WM8958_FLL2_BYP_MASK 0x8000 /* FLL2_BYP */
#define WM8958_FLL2_BYP_SHIFT 15 /* FLL2_BYP */
#define WM8958_FLL2_BYP_WIDTH 1 /* FLL2_BYP */
#define WM8994_FLL2_FRC_NCO_VAL_MASK 0x1F80 /* FLL2_FRC_NCO_VAL - [12:7] */
#define WM8994_FLL2_FRC_NCO_VAL_SHIFT 7 /* FLL2_FRC_NCO_VAL - [12:7] */
#define WM8994_FLL2_FRC_NCO_VAL_WIDTH 6 /* FLL2_FRC_NCO_VAL - [12:7] */
......@@ -2466,6 +2548,24 @@
#define WM8994_FLL2_REFCLK_SRC_SHIFT 0 /* FLL2_REFCLK_SRC - [1:0] */
#define WM8994_FLL2_REFCLK_SRC_WIDTH 2 /* FLL2_REFCLK_SRC - [1:0] */
/*
* R582 (0x246) - FLL2 EFS 1
*/
#define WM8958_FLL2_LAMBDA_MASK 0xFFFF /* FLL2_LAMBDA - [15:0] */
#define WM8958_FLL2_LAMBDA_SHIFT 0 /* FLL2_LAMBDA - [15:0] */
#define WM8958_FLL2_LAMBDA_WIDTH 16 /* FLL2_LAMBDA - [15:0] */
/*
* R583 (0x247) - FLL2 EFS 2
*/
#define WM8958_FLL2_LFSR_SEL_MASK 0x0006 /* FLL2_LFSR_SEL - [2:1] */
#define WM8958_FLL2_LFSR_SEL_SHIFT 1 /* FLL2_LFSR_SEL - [2:1] */
#define WM8958_FLL2_LFSR_SEL_WIDTH 2 /* FLL2_LFSR_SEL - [2:1] */
#define WM8958_FLL2_EFS_ENA 0x0001 /* FLL2_EFS_ENA */
#define WM8958_FLL2_EFS_ENA_MASK 0x0001 /* FLL2_EFS_ENA */
#define WM8958_FLL2_EFS_ENA_SHIFT 0 /* FLL2_EFS_ENA */
#define WM8958_FLL2_EFS_ENA_WIDTH 1 /* FLL2_EFS_ENA */
/*
* R768 (0x300) - AIF1 Control (1)
*/
......@@ -4186,6 +4286,18 @@
#define WM8994_STL_SEL_SHIFT 0 /* STL_SEL */
#define WM8994_STL_SEL_WIDTH 1 /* STL_SEL */
/*
* R1797 (0x705) - JACKDET Ctrl
*/
#define WM1811_JACKDET_DB 0x0100 /* JACKDET_DB */
#define WM1811_JACKDET_DB_MASK 0x0100 /* JACKDET_DB */
#define WM1811_JACKDET_DB_SHIFT 8 /* JACKDET_DB */
#define WM1811_JACKDET_DB_WIDTH 1 /* JACKDET_DB */
#define WM1811_JACKDET_LVL 0x0040 /* JACKDET_LVL */
#define WM1811_JACKDET_LVL_MASK 0x0040 /* JACKDET_LVL */
#define WM1811_JACKDET_LVL_SHIFT 6 /* JACKDET_LVL */
#define WM1811_JACKDET_LVL_WIDTH 1 /* JACKDET_LVL */
/*
* R1824 (0x720) - Pull Control (1)
*/
......
include/sound/Kbuild
浏览文件 @ a429638c
......@@ -6,3 +6,5 @@ header-y += hdsp.h
header-y += hdspm.h
header-y += sb16_csp.h
header-y += sfnt_info.h
header-y += compress_params.h
header-y += compress_offload.h
include/sound/compress_driver.h 0 → 100644
浏览文件 @ a429638c
/*
* compress_driver.h - compress offload driver definations
*
* Copyright (C) 2011 Intel Corporation
* Authors: Vinod Koul <vinod.koul@linux.intel.com>
* Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*/
#ifndef __COMPRESS_DRIVER_H
#define __COMPRESS_DRIVER_H
#include <linux/types.h>
#include <linux/sched.h>
#include <sound/compress_offload.h>
#include <sound/asound.h>
#include <sound/pcm.h>
struct snd_compr_ops;
/**
* struct snd_compr_runtime: runtime stream description
* @state: stream state
* @ops: pointer to DSP callbacks
* @buffer: pointer to kernel buffer, valid only when not in mmap mode or
* DSP doesn't implement copy
* @buffer_size: size of the above buffer
* @fragment_size: size of buffer fragment in bytes
* @fragments: number of such fragments
* @hw_pointer: offset of last location in buffer where DSP copied data
* @app_pointer: offset of last location in buffer where app wrote data
* @total_bytes_available: cumulative number of bytes made available in
* the ring buffer
* @total_bytes_transferred: cumulative bytes transferred by offload DSP
* @sleep: poll sleep
*/
struct snd_compr_runtime {
snd_pcm_state_t state;
struct snd_compr_ops *ops;
void *buffer;
u64 buffer_size;
u32 fragment_size;
u32 fragments;
u64 hw_pointer;
u64 app_pointer;
u64 total_bytes_available;
u64 total_bytes_transferred;
wait_queue_head_t sleep;
};
/**
* struct snd_compr_stream: compressed stream
* @name: device name
* @ops: pointer to DSP callbacks
* @runtime: pointer to runtime structure
* @device: device pointer
* @direction: stream direction, playback/recording
* @private_data: pointer to DSP private data
*/
struct snd_compr_stream {
const char *name;
struct snd_compr_ops *ops;
struct snd_compr_runtime *runtime;
struct snd_compr *device;
enum snd_compr_direction direction;
void *private_data;
};
/**
* struct snd_compr_ops: compressed path DSP operations
* @open: Open the compressed stream
* This callback is mandatory and shall keep dsp ready to receive the stream
* parameter
* @free: Close the compressed stream, mandatory
* @set_params: Sets the compressed stream parameters, mandatory
* This can be called in during stream creation only to set codec params
* and the stream properties
* @get_params: retrieve the codec parameters, mandatory
* @trigger: Trigger operations like start, pause, resume, drain, stop.
* This callback is mandatory
* @pointer: Retrieve current h/w pointer information. Mandatory
* @copy: Copy the compressed data to/from userspace, Optional
* Can't be implemented if DSP supports mmap
* @mmap: DSP mmap method to mmap DSP memory
* @ack: Ack for DSP when data is written to audio buffer, Optional
* Not valid if copy is implemented
* @get_caps: Retrieve DSP capabilities, mandatory
* @get_codec_caps: Retrieve capabilities for a specific codec, mandatory
*/
struct snd_compr_ops {
int (*open)(struct snd_compr_stream *stream);
int (*free)(struct snd_compr_stream *stream);
int (*set_params)(struct snd_compr_stream *stream,
struct snd_compr_params *params);
int (*get_params)(struct snd_compr_stream *stream,
struct snd_codec *params);
int (*trigger)(struct snd_compr_stream *stream, int cmd);
int (*pointer)(struct snd_compr_stream *stream,
struct snd_compr_tstamp *tstamp);
int (*copy)(struct snd_compr_stream *stream, const char __user *buf,
size_t count);
int (*mmap)(struct snd_compr_stream *stream,
struct vm_area_struct *vma);
int (*ack)(struct snd_compr_stream *stream, size_t bytes);
int (*get_caps) (struct snd_compr_stream *stream,
struct snd_compr_caps *caps);
int (*get_codec_caps) (struct snd_compr_stream *stream,
struct snd_compr_codec_caps *codec);
};
/**
* struct snd_compr: Compressed device
* @name: DSP device name
* @dev: Device pointer
* @ops: pointer to DSP callbacks
* @private_data: pointer to DSP pvt data
* @card: sound card pointer
* @direction: Playback or capture direction
* @lock: device lock
* @device: device id
*/
struct snd_compr {
const char *name;
struct device *dev;
struct snd_compr_ops *ops;
void *private_data;
struct snd_card *card;
unsigned int direction;
struct mutex lock;
int device;
};
/* compress device register APIs */
int snd_compress_register(struct snd_compr *device);
int snd_compress_deregister(struct snd_compr *device);
int snd_compress_new(struct snd_card *card, int device,
int type, struct snd_compr *compr);
/* dsp driver callback apis
* For playback: driver should call snd_compress_fragment_elapsed() to let the
* framework know that a fragment has been consumed from the ring buffer
*
* For recording: we want to know when a frame is available or when
* at least one frame is available so snd_compress_frame_elapsed()
* callback should be called when a encodeded frame is available
*/
static inline void snd_compr_fragment_elapsed(struct snd_compr_stream *stream)
{
wake_up(&stream->runtime->sleep);
}
#endif
include/sound/compress_offload.h 0 → 100644
浏览文件 @ a429638c
/*
* compress_offload.h - compress offload header definations
*
* Copyright (C) 2011 Intel Corporation
* Authors: Vinod Koul <vinod.koul@linux.intel.com>
* Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*/
#ifndef __COMPRESS_OFFLOAD_H
#define __COMPRESS_OFFLOAD_H
#include <linux/types.h>
#include <sound/asound.h>
#include <sound/compress_params.h>
#define SNDRV_COMPRESS_VERSION SNDRV_PROTOCOL_VERSION(0, 1, 0)
/**
* struct snd_compressed_buffer: compressed buffer
* @fragment_size: size of buffer fragment in bytes
* @fragments: number of such fragments
*/
struct snd_compressed_buffer {
__u32 fragment_size;
__u32 fragments;
};
/**
* struct snd_compr_params: compressed stream params
* @buffer: buffer description
* @codec: codec parameters
* @no_wake_mode: dont wake on fragment elapsed
*/
struct snd_compr_params {
struct snd_compressed_buffer buffer;
struct snd_codec codec;
__u8 no_wake_mode;
};
/**
* struct snd_compr_tstamp: timestamp descriptor
* @byte_offset: Byte offset in ring buffer to DSP
* @copied_total: Total number of bytes copied from/to ring buffer to/by DSP
* @pcm_frames: Frames decoded or encoded by DSP. This field will evolve by
* large steps and should only be used to monitor encoding/decoding
* progress. It shall not be used for timing estimates.
* @pcm_io_frames: Frames rendered or received by DSP into a mixer or an audio
* output/input. This field should be used for A/V sync or time estimates.
* @sampling_rate: sampling rate of audio
*/
struct snd_compr_tstamp {
__u32 byte_offset;
__u32 copied_total;
snd_pcm_uframes_t pcm_frames;
snd_pcm_uframes_t pcm_io_frames;
__u32 sampling_rate;
};
/**
* struct snd_compr_avail: avail descriptor
* @avail: Number of bytes available in ring buffer for writing/reading
* @tstamp: timestamp infomation
*/
struct snd_compr_avail {
__u64 avail;
struct snd_compr_tstamp tstamp;
};
enum snd_compr_direction {
SND_COMPRESS_PLAYBACK = 0,
SND_COMPRESS_CAPTURE
};
/**
* struct snd_compr_caps: caps descriptor
* @codecs: pointer to array of codecs
* @direction: direction supported. Of type snd_compr_direction
* @min_fragment_size: minimum fragment supported by DSP
* @max_fragment_size: maximum fragment supported by DSP
* @min_fragments: min fragments supported by DSP
* @max_fragments: max fragments supported by DSP
* @num_codecs: number of codecs supported
* @reserved: reserved field
*/
struct snd_compr_caps {
__u32 num_codecs;
__u32 direction;
__u32 min_fragment_size;
__u32 max_fragment_size;
__u32 min_fragments;
__u32 max_fragments;
__u32 codecs[MAX_NUM_CODECS];
__u32 reserved[11];
};
/**
* struct snd_compr_codec_caps: query capability of codec
* @codec: codec for which capability is queried
* @num_descriptors: number of codec descriptors
* @descriptor: array of codec capability descriptor
*/
struct snd_compr_codec_caps {
__u32 codec;
__u32 num_descriptors;
struct snd_codec_desc descriptor[MAX_NUM_CODEC_DESCRIPTORS];
};
/**
* compress path ioctl definitions
* SNDRV_COMPRESS_GET_CAPS: Query capability of DSP
* SNDRV_COMPRESS_GET_CODEC_CAPS: Query capability of a codec
* SNDRV_COMPRESS_SET_PARAMS: Set codec and stream parameters
* Note: only codec params can be changed runtime and stream params cant be
* SNDRV_COMPRESS_GET_PARAMS: Query codec params
* SNDRV_COMPRESS_TSTAMP: get the current timestamp value
* SNDRV_COMPRESS_AVAIL: get the current buffer avail value.
* This also queries the tstamp properties
* SNDRV_COMPRESS_PAUSE: Pause the running stream
* SNDRV_COMPRESS_RESUME: resume a paused stream
* SNDRV_COMPRESS_START: Start a stream
* SNDRV_COMPRESS_STOP: stop a running stream, discarding ring buffer content
* and the buffers currently with DSP
* SNDRV_COMPRESS_DRAIN: Play till end of buffers and stop after that
* SNDRV_COMPRESS_IOCTL_VERSION: Query the API version
*/
#define SNDRV_COMPRESS_IOCTL_VERSION _IOR('C', 0x00, int)
#define SNDRV_COMPRESS_GET_CAPS _IOWR('C', 0x10, struct snd_compr_caps)
#define SNDRV_COMPRESS_GET_CODEC_CAPS _IOWR('C', 0x11,\
struct snd_compr_codec_caps)
#define SNDRV_COMPRESS_SET_PARAMS _IOW('C', 0x12, struct snd_compr_params)
#define SNDRV_COMPRESS_GET_PARAMS _IOR('C', 0x13, struct snd_codec)
#define SNDRV_COMPRESS_TSTAMP _IOR('C', 0x20, struct snd_compr_tstamp)
#define SNDRV_COMPRESS_AVAIL _IOR('C', 0x21, struct snd_compr_avail)
#define SNDRV_COMPRESS_PAUSE _IO('C', 0x30)
#define SNDRV_COMPRESS_RESUME _IO('C', 0x31)
#define SNDRV_COMPRESS_START _IO('C', 0x32)
#define SNDRV_COMPRESS_STOP _IO('C', 0x33)
#define SNDRV_COMPRESS_DRAIN _IO('C', 0x34)
/*
* TODO
* 1. add mmap support
*
*/
#define SND_COMPR_TRIGGER_DRAIN 7 /*FIXME move this to pcm.h */
#endif
include/sound/compress_params.h 0 → 100644
浏览文件 @ a429638c
/*
* compress_params.h - codec types and parameters for compressed data
* streaming interface
*
* Copyright (C) 2011 Intel Corporation
* Authors: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
* Vinod Koul <vinod.koul@linux.intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* The definitions in this file are derived from the OpenMAX AL version 1.1
* and OpenMAX IL v 1.1.2 header files which contain the copyright notice below.
*
* Copyright (c) 2007-2010 The Khronos Group Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and/or associated documentation files (the
* "Materials "), to deal in the Materials without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Materials, and to
* permit persons to whom the Materials are furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Materials.
*
* THE MATERIALS ARE PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
* CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
*
*/
#ifndef __SND_COMPRESS_PARAMS_H
#define __SND_COMPRESS_PARAMS_H
/* AUDIO CODECS SUPPORTED */
#define MAX_NUM_CODECS 32
#define MAX_NUM_CODEC_DESCRIPTORS 32
#define MAX_NUM_BITRATES 32
/* Codecs are listed linearly to allow for extensibility */
#define SND_AUDIOCODEC_PCM ((__u32) 0x00000001)
#define SND_AUDIOCODEC_MP3 ((__u32) 0x00000002)
#define SND_AUDIOCODEC_AMR ((__u32) 0x00000003)
#define SND_AUDIOCODEC_AMRWB ((__u32) 0x00000004)
#define SND_AUDIOCODEC_AMRWBPLUS ((__u32) 0x00000005)
#define SND_AUDIOCODEC_AAC ((__u32) 0x00000006)
#define SND_AUDIOCODEC_WMA ((__u32) 0x00000007)
#define SND_AUDIOCODEC_REAL ((__u32) 0x00000008)
#define SND_AUDIOCODEC_VORBIS ((__u32) 0x00000009)
#define SND_AUDIOCODEC_FLAC ((__u32) 0x0000000A)
#define SND_AUDIOCODEC_IEC61937 ((__u32) 0x0000000B)
#define SND_AUDIOCODEC_G723_1 ((__u32) 0x0000000C)
#define SND_AUDIOCODEC_G729 ((__u32) 0x0000000D)
/*
* Profile and modes are listed with bit masks. This allows for a
* more compact representation of fields that will not evolve
* (in contrast to the list of codecs)
*/
#define SND_AUDIOPROFILE_PCM ((__u32) 0x00000001)
/* MP3 modes are only useful for encoders */
#define SND_AUDIOCHANMODE_MP3_MONO ((__u32) 0x00000001)
#define SND_AUDIOCHANMODE_MP3_STEREO ((__u32) 0x00000002)
#define SND_AUDIOCHANMODE_MP3_JOINTSTEREO ((__u32) 0x00000004)
#define SND_AUDIOCHANMODE_MP3_DUAL ((__u32) 0x00000008)
#define SND_AUDIOPROFILE_AMR ((__u32) 0x00000001)
/* AMR modes are only useful for encoders */
#define SND_AUDIOMODE_AMR_DTX_OFF ((__u32) 0x00000001)
#define SND_AUDIOMODE_AMR_VAD1 ((__u32) 0x00000002)
#define SND_AUDIOMODE_AMR_VAD2 ((__u32) 0x00000004)
#define SND_AUDIOSTREAMFORMAT_UNDEFINED ((__u32) 0x00000000)
#define SND_AUDIOSTREAMFORMAT_CONFORMANCE ((__u32) 0x00000001)
#define SND_AUDIOSTREAMFORMAT_IF1 ((__u32) 0x00000002)
#define SND_AUDIOSTREAMFORMAT_IF2 ((__u32) 0x00000004)
#define SND_AUDIOSTREAMFORMAT_FSF ((__u32) 0x00000008)
#define SND_AUDIOSTREAMFORMAT_RTPPAYLOAD ((__u32) 0x00000010)
#define SND_AUDIOSTREAMFORMAT_ITU ((__u32) 0x00000020)
#define SND_AUDIOPROFILE_AMRWB ((__u32) 0x00000001)
/* AMRWB modes are only useful for encoders */
#define SND_AUDIOMODE_AMRWB_DTX_OFF ((__u32) 0x00000001)
#define SND_AUDIOMODE_AMRWB_VAD1 ((__u32) 0x00000002)
#define SND_AUDIOMODE_AMRWB_VAD2 ((__u32) 0x00000004)
#define SND_AUDIOPROFILE_AMRWBPLUS ((__u32) 0x00000001)
#define SND_AUDIOPROFILE_AAC ((__u32) 0x00000001)
/* AAC modes are required for encoders and decoders */
#define SND_AUDIOMODE_AAC_MAIN ((__u32) 0x00000001)
#define SND_AUDIOMODE_AAC_LC ((__u32) 0x00000002)
#define SND_AUDIOMODE_AAC_SSR ((__u32) 0x00000004)
#define SND_AUDIOMODE_AAC_LTP ((__u32) 0x00000008)
#define SND_AUDIOMODE_AAC_HE ((__u32) 0x00000010)
#define SND_AUDIOMODE_AAC_SCALABLE ((__u32) 0x00000020)
#define SND_AUDIOMODE_AAC_ERLC ((__u32) 0x00000040)
#define SND_AUDIOMODE_AAC_LD ((__u32) 0x00000080)
#define SND_AUDIOMODE_AAC_HE_PS ((__u32) 0x00000100)
#define SND_AUDIOMODE_AAC_HE_MPS ((__u32) 0x00000200)
/* AAC formats are required for encoders and decoders */
#define SND_AUDIOSTREAMFORMAT_MP2ADTS ((__u32) 0x00000001)
#define SND_AUDIOSTREAMFORMAT_MP4ADTS ((__u32) 0x00000002)
#define SND_AUDIOSTREAMFORMAT_MP4LOAS ((__u32) 0x00000004)
#define SND_AUDIOSTREAMFORMAT_MP4LATM ((__u32) 0x00000008)
#define SND_AUDIOSTREAMFORMAT_ADIF ((__u32) 0x00000010)
#define SND_AUDIOSTREAMFORMAT_MP4FF ((__u32) 0x00000020)
#define SND_AUDIOSTREAMFORMAT_RAW ((__u32) 0x00000040)
#define SND_AUDIOPROFILE_WMA7 ((__u32) 0x00000001)
#define SND_AUDIOPROFILE_WMA8 ((__u32) 0x00000002)
#define SND_AUDIOPROFILE_WMA9 ((__u32) 0x00000004)
#define SND_AUDIOPROFILE_WMA10 ((__u32) 0x00000008)
#define SND_AUDIOMODE_WMA_LEVEL1 ((__u32) 0x00000001)
#define SND_AUDIOMODE_WMA_LEVEL2 ((__u32) 0x00000002)
#define SND_AUDIOMODE_WMA_LEVEL3 ((__u32) 0x00000004)
#define SND_AUDIOMODE_WMA_LEVEL4 ((__u32) 0x00000008)
#define SND_AUDIOMODE_WMAPRO_LEVELM0 ((__u32) 0x00000010)
#define SND_AUDIOMODE_WMAPRO_LEVELM1 ((__u32) 0x00000020)
#define SND_AUDIOMODE_WMAPRO_LEVELM2 ((__u32) 0x00000040)
#define SND_AUDIOMODE_WMAPRO_LEVELM3 ((__u32) 0x00000080)
#define SND_AUDIOSTREAMFORMAT_WMA_ASF ((__u32) 0x00000001)
/*
* Some implementations strip the ASF header and only send ASF packets
* to the DSP
*/
#define SND_AUDIOSTREAMFORMAT_WMA_NOASF_HDR ((__u32) 0x00000002)
#define SND_AUDIOPROFILE_REALAUDIO ((__u32) 0x00000001)
#define SND_AUDIOMODE_REALAUDIO_G2 ((__u32) 0x00000001)
#define SND_AUDIOMODE_REALAUDIO_8 ((__u32) 0x00000002)
#define SND_AUDIOMODE_REALAUDIO_10 ((__u32) 0x00000004)
#define SND_AUDIOMODE_REALAUDIO_SURROUND ((__u32) 0x00000008)
#define SND_AUDIOPROFILE_VORBIS ((__u32) 0x00000001)
#define SND_AUDIOMODE_VORBIS ((__u32) 0x00000001)
#define SND_AUDIOPROFILE_FLAC ((__u32) 0x00000001)
/*
* Define quality levels for FLAC encoders, from LEVEL0 (fast)
* to LEVEL8 (best)
*/
#define SND_AUDIOMODE_FLAC_LEVEL0 ((__u32) 0x00000001)
#define SND_AUDIOMODE_FLAC_LEVEL1 ((__u32) 0x00000002)
#define SND_AUDIOMODE_FLAC_LEVEL2 ((__u32) 0x00000004)
#define SND_AUDIOMODE_FLAC_LEVEL3 ((__u32) 0x00000008)
#define SND_AUDIOMODE_FLAC_LEVEL4 ((__u32) 0x00000010)
#define SND_AUDIOMODE_FLAC_LEVEL5 ((__u32) 0x00000020)
#define SND_AUDIOMODE_FLAC_LEVEL6 ((__u32) 0x00000040)
#define SND_AUDIOMODE_FLAC_LEVEL7 ((__u32) 0x00000080)
#define SND_AUDIOMODE_FLAC_LEVEL8 ((__u32) 0x00000100)
#define SND_AUDIOSTREAMFORMAT_FLAC ((__u32) 0x00000001)
#define SND_AUDIOSTREAMFORMAT_FLAC_OGG ((__u32) 0x00000002)
/* IEC61937 payloads without CUVP and preambles */
#define SND_AUDIOPROFILE_IEC61937 ((__u32) 0x00000001)
/* IEC61937 with S/PDIF preambles+CUVP bits in 32-bit containers */
#define SND_AUDIOPROFILE_IEC61937_SPDIF ((__u32) 0x00000002)
/*
* IEC modes are mandatory for decoders. Format autodetection
* will only happen on the DSP side with mode 0. The PCM mode should
* not be used, the PCM codec should be used instead.
*/
#define SND_AUDIOMODE_IEC_REF_STREAM_HEADER ((__u32) 0x00000000)
#define SND_AUDIOMODE_IEC_LPCM ((__u32) 0x00000001)
#define SND_AUDIOMODE_IEC_AC3 ((__u32) 0x00000002)
#define SND_AUDIOMODE_IEC_MPEG1 ((__u32) 0x00000004)
#define SND_AUDIOMODE_IEC_MP3 ((__u32) 0x00000008)
#define SND_AUDIOMODE_IEC_MPEG2 ((__u32) 0x00000010)
#define SND_AUDIOMODE_IEC_AACLC ((__u32) 0x00000020)
#define SND_AUDIOMODE_IEC_DTS ((__u32) 0x00000040)
#define SND_AUDIOMODE_IEC_ATRAC ((__u32) 0x00000080)
#define SND_AUDIOMODE_IEC_SACD ((__u32) 0x00000100)
#define SND_AUDIOMODE_IEC_EAC3 ((__u32) 0x00000200)
#define SND_AUDIOMODE_IEC_DTS_HD ((__u32) 0x00000400)
#define SND_AUDIOMODE_IEC_MLP ((__u32) 0x00000800)
#define SND_AUDIOMODE_IEC_DST ((__u32) 0x00001000)
#define SND_AUDIOMODE_IEC_WMAPRO ((__u32) 0x00002000)
#define SND_AUDIOMODE_IEC_REF_CXT ((__u32) 0x00004000)
#define SND_AUDIOMODE_IEC_HE_AAC ((__u32) 0x00008000)
#define SND_AUDIOMODE_IEC_HE_AAC2 ((__u32) 0x00010000)
#define SND_AUDIOMODE_IEC_MPEG_SURROUND ((__u32) 0x00020000)
#define SND_AUDIOPROFILE_G723_1 ((__u32) 0x00000001)
#define SND_AUDIOMODE_G723_1_ANNEX_A ((__u32) 0x00000001)
#define SND_AUDIOMODE_G723_1_ANNEX_B ((__u32) 0x00000002)
#define SND_AUDIOMODE_G723_1_ANNEX_C ((__u32) 0x00000004)
#define SND_AUDIOPROFILE_G729 ((__u32) 0x00000001)
#define SND_AUDIOMODE_G729_ANNEX_A ((__u32) 0x00000001)
#define SND_AUDIOMODE_G729_ANNEX_B ((__u32) 0x00000002)
/* <FIXME: multichannel encoders aren't supported for now. Would need
an additional definition of channel arrangement> */
/* VBR/CBR definitions */
#define SND_RATECONTROLMODE_CONSTANTBITRATE ((__u32) 0x00000001)
#define SND_RATECONTROLMODE_VARIABLEBITRATE ((__u32) 0x00000002)
/* Encoder options */
struct snd_enc_wma {
__u32 super_block_align; /* WMA Type-specific data */
};
/**
* struct snd_enc_vorbis
* @quality: Sets encoding quality to n, between -1 (low) and 10 (high).
* In the default mode of operation, the quality level is 3.
* Normal quality range is 0 - 10.
* @managed: Boolean. Set bitrate management mode. This turns off the
* normal VBR encoding, but allows hard or soft bitrate constraints to be
* enforced by the encoder. This mode can be slower, and may also be
* lower quality. It is primarily useful for streaming.
* @max_bit_rate: Enabled only if managed is TRUE
* @min_bit_rate: Enabled only if managed is TRUE
* @downmix: Boolean. Downmix input from stereo to mono (has no effect on
* non-stereo streams). Useful for lower-bitrate encoding.
*
* These options were extracted from the OpenMAX IL spec and Gstreamer vorbisenc
* properties
*
* For best quality users should specify VBR mode and set quality levels.
*/
struct snd_enc_vorbis {
__s32 quality;
__u32 managed;
__u32 max_bit_rate;
__u32 min_bit_rate;
__u32 downmix;
};
/**
* struct snd_enc_real
* @quant_bits: number of coupling quantization bits in the stream
* @start_region: coupling start region in the stream
* @num_regions: number of regions value
*
* These options were extracted from the OpenMAX IL spec
*/
struct snd_enc_real {
__u32 quant_bits;
__u32 start_region;
__u32 num_regions;
};
/**
* struct snd_enc_flac
* @num: serial number, valid only for OGG formats
* needs to be set by application
* @gain: Add replay gain tags
*
* These options were extracted from the FLAC online documentation
* at http://flac.sourceforge.net/documentation_tools_flac.html
*
* To make the API simpler, it is assumed that the user will select quality
* profiles. Additional options that affect encoding quality and speed can
* be added at a later stage if needed.
*
* By default the Subset format is used by encoders.
*
* TAGS such as pictures, etc, cannot be handled by an offloaded encoder and are
* not supported in this API.
*/
struct snd_enc_flac {
__u32 num;
__u32 gain;
};
struct snd_enc_generic {
__u32 bw; /* encoder bandwidth */
__s32 reserved[15];
};
union snd_codec_options {
struct snd_enc_wma wma;
struct snd_enc_vorbis vorbis;
struct snd_enc_real real;
struct snd_enc_flac flac;
struct snd_enc_generic generic;
};
/** struct snd_codec_desc - description of codec capabilities
* @max_ch: Maximum number of audio channels
* @sample_rates: Sampling rates in Hz, use SNDRV_PCM_RATE_xxx for this
* @bit_rate: Indexed array containing supported bit rates
* @num_bitrates: Number of valid values in bit_rate array
* @rate_control: value is specified by SND_RATECONTROLMODE defines.
* @profiles: Supported profiles. See SND_AUDIOPROFILE defines.
* @modes: Supported modes. See SND_AUDIOMODE defines
* @formats: Supported formats. See SND_AUDIOSTREAMFORMAT defines
* @min_buffer: Minimum buffer size handled by codec implementation
* @reserved: reserved for future use
*
* This structure provides a scalar value for profiles, modes and stream
* format fields.
* If an implementation supports multiple combinations, they will be listed as
* codecs with different descriptors, for example there would be 2 descriptors
* for AAC-RAW and AAC-ADTS.
* This entails some redundancy but makes it easier to avoid invalid
* configurations.
*
*/
struct snd_codec_desc {
__u32 max_ch;
__u32 sample_rates;
__u32 bit_rate[MAX_NUM_BITRATES];
__u32 num_bitrates;
__u32 rate_control;
__u32 profiles;
__u32 modes;
__u32 formats;
__u32 min_buffer;
__u32 reserved[15];
};
/** struct snd_codec
* @id: Identifies the supported audio encoder/decoder.
* See SND_AUDIOCODEC macros.
* @ch_in: Number of input audio channels
* @ch_out: Number of output channels. In case of contradiction between
* this field and the channelMode field, the channelMode field
* overrides.
* @sample_rate: Audio sample rate of input data
* @bit_rate: Bitrate of encoded data. May be ignored by decoders
* @rate_control: Encoding rate control. See SND_RATECONTROLMODE defines.
* Encoders may rely on profiles for quality levels.
* May be ignored by decoders.
* @profile: Mandatory for encoders, can be mandatory for specific
* decoders as well. See SND_AUDIOPROFILE defines.
* @level: Supported level (Only used by WMA at the moment)
* @ch_mode: Channel mode for encoder. See SND_AUDIOCHANMODE defines
* @format: Format of encoded bistream. Mandatory when defined.
* See SND_AUDIOSTREAMFORMAT defines.
* @align: Block alignment in bytes of an audio sample.
* Only required for PCM or IEC formats.
* @options: encoder-specific settings
* @reserved: reserved for future use
*/
struct snd_codec {
__u32 id;
__u32 ch_in;
__u32 ch_out;
__u32 sample_rate;
__u32 bit_rate;
__u32 rate_control;
__u32 profile;
__u32 level;
__u32 ch_mode;
__u32 format;
__u32 align;
union snd_codec_options options;
__u32 reserved[3];
};
#endif
include/sound/control.h
浏览文件 @ a429638c
......@@ -227,4 +227,12 @@ snd_ctl_add_slave_uncached(struct snd_kcontrol *master,
return _snd_ctl_add_slave(master, slave, SND_CTL_SLAVE_NEED_UPDATE);
}
/*
* Helper functions for jack-detection controls
*/
struct snd_kcontrol *
snd_kctl_jack_new(const char *name, int idx, void *private_data);
void snd_kctl_jack_report(struct snd_card *card,
struct snd_kcontrol *kctl, bool status);
#endif /* __SOUND_CONTROL_H */
include/sound/core.h
浏览文件 @ a429638c
......@@ -62,6 +62,7 @@ typedef int __bitwise snd_device_type_t;
#define SNDRV_DEV_BUS ((__force snd_device_type_t) 0x1007)
#define SNDRV_DEV_CODEC ((__force snd_device_type_t) 0x1008)
#define SNDRV_DEV_JACK ((__force snd_device_type_t) 0x1009)
#define SNDRV_DEV_COMPRESS ((__force snd_device_type_t) 0x100A)
#define SNDRV_DEV_LOWLEVEL ((__force snd_device_type_t) 0x2000)
typedef int __bitwise snd_device_state_t;
......
include/sound/minors.h
浏览文件 @ a429638c
......@@ -35,7 +35,7 @@
#define SNDRV_MINOR_TIMER 33 /* SNDRV_MINOR_GLOBAL + 1 * 32 */
#ifndef CONFIG_SND_DYNAMIC_MINORS
/* 2 - 3 (reserved) */
#define SNDRV_MINOR_COMPRESS 2 /* 2 - 3 */
#define SNDRV_MINOR_HWDEP 4 /* 4 - 7 */
#define SNDRV_MINOR_RAWMIDI 8 /* 8 - 15 */
#define SNDRV_MINOR_PCM_PLAYBACK 16 /* 16 - 23 */
......@@ -49,6 +49,7 @@
#define SNDRV_DEVICE_TYPE_PCM_CAPTURE SNDRV_MINOR_PCM_CAPTURE
#define SNDRV_DEVICE_TYPE_SEQUENCER SNDRV_MINOR_SEQUENCER
#define SNDRV_DEVICE_TYPE_TIMER SNDRV_MINOR_TIMER
#define SNDRV_DEVICE_TYPE_COMPRESS SNDRV_MINOR_COMPRESS
#else /* CONFIG_SND_DYNAMIC_MINORS */
......@@ -60,6 +61,7 @@ enum {
SNDRV_DEVICE_TYPE_RAWMIDI,
SNDRV_DEVICE_TYPE_PCM_PLAYBACK,
SNDRV_DEVICE_TYPE_PCM_CAPTURE,
SNDRV_DEVICE_TYPE_COMPRESS,
};
#endif /* CONFIG_SND_DYNAMIC_MINORS */
......
include/sound/sh_fsi.h
浏览文件 @ a429638c
......@@ -78,4 +78,16 @@ struct sh_fsi_platform_info {
int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
};
/*
* for fsi-ak4642
*/
struct fsi_ak4642_info {
const char *name;
const char *card;
const char *cpu_dai;
const char *codec;
const char *platform;
int id;
};
#endif /* __SOUND_FSI_H */
include/sound/soc-dapm.h
浏览文件 @ a429638c
......@@ -43,6 +43,9 @@
.num_kcontrols = 0}
/* platform domain */
#define SND_SOC_DAPM_SIGGEN(wname) \
{ .id = snd_soc_dapm_siggen, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
#define SND_SOC_DAPM_INPUT(wname) \
{ .id = snd_soc_dapm_input, .name = wname, .kcontrol_news = NULL, \
.num_kcontrols = 0, .reg = SND_SOC_NOPM }
......@@ -380,6 +383,7 @@ int snd_soc_dapm_force_enable_pin(struct snd_soc_dapm_context *dapm,
const char *pin);
int snd_soc_dapm_ignore_suspend(struct snd_soc_dapm_context *dapm,
const char *pin);
void snd_soc_dapm_auto_nc_codec_pins(struct snd_soc_codec *codec);
/* Mostly internal - should not normally be used */
void dapm_mark_dirty(struct snd_soc_dapm_widget *w, const char *reason);
......@@ -409,6 +413,7 @@ enum snd_soc_dapm_type {
snd_soc_dapm_supply, /* power/clock supply */
snd_soc_dapm_aif_in, /* audio interface input */
snd_soc_dapm_aif_out, /* audio interface output */
snd_soc_dapm_siggen, /* signal generator */
};
/*
......
include/sound/soc.h
浏览文件 @ a429638c
......@@ -231,6 +231,7 @@ enum snd_soc_bias_level {
SND_SOC_BIAS_ON = 3,
};
struct device_node;
struct snd_jack;
struct snd_soc_card;
struct snd_soc_pcm_stream;
......@@ -266,8 +267,6 @@ enum snd_soc_control_type {
enum snd_soc_compress_type {
SND_SOC_FLAT_COMPRESSION = 1,
SND_SOC_LZO_COMPRESSION,
SND_SOC_RBTREE_COMPRESSION
};
enum snd_soc_pcm_subclass {
......@@ -318,6 +317,7 @@ int snd_soc_platform_read(struct snd_soc_platform *platform,
unsigned int reg);
int snd_soc_platform_write(struct snd_soc_platform *platform,
unsigned int reg, unsigned int val);
int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num);
/* Utility functions to get clock rates from various things */
int snd_soc_calc_frame_size(int sample_size, int channels, int tdm_slots);
......@@ -593,8 +593,7 @@ struct snd_soc_codec_driver {
/* driver ops */
int (*probe)(struct snd_soc_codec *);
int (*remove)(struct snd_soc_codec *);
int (*suspend)(struct snd_soc_codec *,
pm_message_t state);
int (*suspend)(struct snd_soc_codec *);
int (*resume)(struct snd_soc_codec *);
/* Default control and setup, added after probe() is run */
......@@ -706,8 +705,11 @@ struct snd_soc_dai_link {
const char *name; /* Codec name */
const char *stream_name; /* Stream name */
const char *codec_name; /* for multi-codec */
const struct device_node *codec_of_node;
const char *platform_name; /* for multi-platform */
const struct device_node *platform_of_node;
const char *cpu_dai_name;
const struct device_node *cpu_dai_of_node;
const char *codec_dai_name;
unsigned int dai_fmt; /* format to set on init */
......@@ -718,6 +720,9 @@ struct snd_soc_dai_link {
/* Symmetry requirements */
unsigned int symmetric_rates:1;
/* pmdown_time is ignored at stop */
unsigned int ignore_pmdown_time:1;
/* codec/machine specific init - e.g. add machine controls */
int (*init)(struct snd_soc_pcm_runtime *rtd);
......@@ -813,6 +818,7 @@ struct snd_soc_card {
int num_dapm_widgets;
const struct snd_soc_dapm_route *dapm_routes;
int num_dapm_routes;
bool fully_routed;
struct work_struct deferred_resume_work;
......@@ -840,8 +846,8 @@ struct snd_soc_card {
};
/* SoC machine DAI configuration, glues a codec and cpu DAI together */
struct snd_soc_pcm_runtime {
struct device dev;
struct snd_soc_pcm_runtime {
struct device *dev;
struct snd_soc_card *card;
struct snd_soc_dai_link *dai_link;
struct mutex pcm_mutex;
......@@ -927,12 +933,12 @@ static inline void *snd_soc_platform_get_drvdata(struct snd_soc_platform *platfo
static inline void snd_soc_pcm_set_drvdata(struct snd_soc_pcm_runtime *rtd,
void *data)
{
dev_set_drvdata(&rtd->dev, data);
dev_set_drvdata(rtd->dev, data);
}
static inline void *snd_soc_pcm_get_drvdata(struct snd_soc_pcm_runtime *rtd)
{
return dev_get_drvdata(&rtd->dev);
return dev_get_drvdata(rtd->dev);
}
static inline void snd_soc_initialize_card_lists(struct snd_soc_card *card)
......@@ -960,6 +966,11 @@ static inline bool snd_soc_volsw_is_stereo(struct soc_mixer_control *mc)
int snd_soc_util_init(void);
void snd_soc_util_exit(void);
int snd_soc_of_parse_card_name(struct snd_soc_card *card,
const char *propname);
int snd_soc_of_parse_audio_routing(struct snd_soc_card *card,
const char *propname);
#include <sound/soc-dai.h>
#ifdef CONFIG_DEBUG_FS
......
include/sound/sta32x.h 0 → 100644
浏览文件 @ a429638c
/*
* Platform data for ST STA32x ASoC codec driver.
*
* Copyright: 2011 Raumfeld GmbH
* Author: Johannes Stezenbach <js@sig21.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __LINUX_SND__STA32X_H
#define __LINUX_SND__STA32X_H
#define STA32X_OCFG_2CH 0
#define STA32X_OCFG_2_1CH 1
#define STA32X_OCFG_1CH 3
#define STA32X_OM_CH1 0
#define STA32X_OM_CH2 1
#define STA32X_OM_CH3 2
#define STA32X_THERMAL_ADJUSTMENT_ENABLE 1
#define STA32X_THERMAL_RECOVERY_ENABLE 2
struct sta32x_platform_data {
int output_conf;
int ch1_output_mapping;
int ch2_output_mapping;
int ch3_output_mapping;
int thermal_conf;
int needs_esd_watchdog;
};
#endif /* __LINUX_SND__STA32X_H */
include/sound/wm8903.h
浏览文件 @ a429638c
......@@ -11,8 +11,11 @@
#ifndef __LINUX_SND_WM8903_H
#define __LINUX_SND_WM8903_H
/* Used to enable configuration of a GPIO to all zeros */
#define WM8903_GPIO_NO_CONFIG 0x8000
/*
* Used to enable configuration of a GPIO to all zeros; a gpio_cfg value of
* zero in platform data means "don't touch this pin".
*/
#define WM8903_GPIO_CONFIG_ZERO 0x8000
/*
* R6 (0x06) - Mic Bias Control 0
......
sound/arm/pxa2xx-ac97.c
浏览文件 @ a429638c
......@@ -251,18 +251,7 @@ static struct platform_driver pxa2xx_ac97_driver = {
},
};
static int __init pxa2xx_ac97_init(void)
{
return platform_driver_register(&pxa2xx_ac97_driver);
}
static void __exit pxa2xx_ac97_exit(void)
{
platform_driver_unregister(&pxa2xx_ac97_driver);
}
module_init(pxa2xx_ac97_init);
module_exit(pxa2xx_ac97_exit);
module_platform_driver(pxa2xx_ac97_driver);
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
......
sound/core/Kconfig
浏览文件 @ a429638c
......@@ -154,6 +154,16 @@ config SND_DYNAMIC_MINORS
If you are unsure about this, say N here.
config SND_COMPRESS_OFFLOAD
tristate "ALSA Compressed audio offload support"
default n
help
If you want support for offloading compressed audio and have such
a hardware, then you should say Y here and also to the DSP driver
of your platform.
If you are unsure about this, say N here.
config SND_SUPPORT_OLD_API
bool "Support old ALSA API"
default y
......@@ -206,6 +216,9 @@ config SND_PCM_XRUN_DEBUG
config SND_VMASTER
bool
config SND_KCTL_JACK
bool
config SND_DMA_SGBUF
def_bool y
depends on X86
......
sound/core/Makefile
浏览文件 @ a429638c
......@@ -7,6 +7,7 @@ snd-y := sound.o init.o memory.o info.o control.o misc.o device.o
snd-$(CONFIG_ISA_DMA_API) += isadma.o
snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o info_oss.o
snd-$(CONFIG_SND_VMASTER) += vmaster.o
snd-$(CONFIG_SND_KCTL_JACK) += ctljack.o
snd-$(CONFIG_SND_JACK) += jack.o
snd-pcm-objs := pcm.o pcm_native.o pcm_lib.o pcm_timer.o pcm_misc.o \
......@@ -21,6 +22,8 @@ snd-hrtimer-objs := hrtimer.o
snd-rtctimer-objs := rtctimer.o
snd-hwdep-objs := hwdep.o
snd-compress-objs := compress_offload.o
obj-$(CONFIG_SND) += snd.o
obj-$(CONFIG_SND_HWDEP) += snd-hwdep.o
obj-$(CONFIG_SND_TIMER) += snd-timer.o
......@@ -31,3 +34,5 @@ obj-$(CONFIG_SND_RAWMIDI) += snd-rawmidi.o
obj-$(CONFIG_SND_OSSEMUL) += oss/
obj-$(CONFIG_SND_SEQUENCER) += seq/
obj-$(CONFIG_SND_COMPRESS_OFFLOAD) += snd-compress.o
sound/core/compress_offload.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/core/ctljack.c 0 → 100644
浏览文件 @ a429638c
/*
* Helper functions for jack-detection kcontrols
*
* Copyright (c) 2011 Takashi Iwai <tiwai@suse.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <sound/core.h>
#include <sound/control.h>
#define jack_detect_kctl_info snd_ctl_boolean_mono_info
static int jack_detect_kctl_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
ucontrol->value.integer.value[0] = kcontrol->private_value;
return 0;
}
static struct snd_kcontrol_new jack_detect_kctl = {
/* name is filled later */
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
.access = SNDRV_CTL_ELEM_ACCESS_READ,
.info = jack_detect_kctl_info,
.get = jack_detect_kctl_get,
};
struct snd_kcontrol *
snd_kctl_jack_new(const char *name, int idx, void *private_data)
{
struct snd_kcontrol *kctl;
kctl = snd_ctl_new1(&jack_detect_kctl, private_data);
if (!kctl)
return NULL;
snprintf(kctl->id.name, sizeof(kctl->id.name), "%s Jack", name);
kctl->id.index = idx;
kctl->private_value = 0;
return kctl;
}
EXPORT_SYMBOL_GPL(snd_kctl_jack_new);
void snd_kctl_jack_report(struct snd_card *card,
struct snd_kcontrol *kctl, bool status)
{
if (kctl->private_value == status)
return;
kctl->private_value = status;
snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE, &kctl->id);
}
EXPORT_SYMBOL_GPL(snd_kctl_jack_report);
sound/core/oss/pcm_oss.c
浏览文件 @ a429638c
......@@ -47,7 +47,7 @@
static int dsp_map[SNDRV_CARDS];
static int adsp_map[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 1};
static int nonblock_open = 1;
static bool nonblock_open = 1;
MODULE_AUTHOR("Jaroslav Kysela <perex@perex.cz>, Abramo Bagnara <abramo@alsa-project.org>");
MODULE_DESCRIPTION("PCM OSS emulation for ALSA.");
......
sound/core/seq/seq_dummy.c
浏览文件 @ a429638c
......@@ -65,7 +65,7 @@ MODULE_LICENSE("GPL");
MODULE_ALIAS("snd-seq-client-" __stringify(SNDRV_SEQ_CLIENT_DUMMY));
static int ports = 1;
static int duplex;
static bool duplex;
module_param(ports, int, 0444);
MODULE_PARM_DESC(ports, "number of ports to be created");
......
sound/core/sound.c
浏览文件 @ a429638c
......@@ -229,6 +229,7 @@ static int snd_kernel_minor(int type, struct snd_card *card, int dev)
case SNDRV_DEVICE_TYPE_RAWMIDI:
case SNDRV_DEVICE_TYPE_PCM_PLAYBACK:
case SNDRV_DEVICE_TYPE_PCM_CAPTURE:
case SNDRV_DEVICE_TYPE_COMPRESS:
if (snd_BUG_ON(!card))
return -EINVAL;
minor = SNDRV_MINOR(card->number, type + dev);
......
sound/drivers/aloop.c
浏览文件 @ a429638c
......@@ -51,7 +51,7 @@ MODULE_SUPPORTED_DEVICE("{{ALSA,Loopback soundcard}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8};
static int pcm_notify[SNDRV_CARDS];
......
sound/drivers/dummy.c
浏览文件 @ a429638c
......@@ -60,15 +60,15 @@ MODULE_SUPPORTED_DEVICE("{{ALSA,Dummy soundcard}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static char *model[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = NULL};
static int pcm_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static int pcm_substreams[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 8};
//static int midi_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 2};
#ifdef CONFIG_HIGH_RES_TIMERS
static int hrtimer = 1;
static bool hrtimer = 1;
#endif
static int fake_buffer = 1;
static bool fake_buffer = 1;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for dummy soundcard.");
......
sound/drivers/ml403-ac97cr.c
浏览文件 @ a429638c
......@@ -73,7 +73,7 @@ MODULE_SUPPORTED_DEVICE("{{Xilinx,ML403 AC97 Controller Reference}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for ML403 AC97 Controller Reference.");
......@@ -1341,15 +1341,4 @@ static struct platform_driver snd_ml403_ac97cr_driver = {
},
};
static int __init alsa_card_ml403_ac97cr_init(void)
{
return platform_driver_register(&snd_ml403_ac97cr_driver);
}
static void __exit alsa_card_ml403_ac97cr_exit(void)
{
platform_driver_unregister(&snd_ml403_ac97cr_driver);
}
module_init(alsa_card_ml403_ac97cr_init)
module_exit(alsa_card_ml403_ac97cr_exit)
module_platform_driver(snd_ml403_ac97cr_driver);
sound/drivers/mpu401/mpu401.c
浏览文件 @ a429638c
......@@ -35,13 +35,13 @@ MODULE_LICENSE("GPL");
static int index[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -2}; /* exclude the first card */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
#ifdef CONFIG_PNP
static int pnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static bool pnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
#endif
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* MPU-401 port number */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* MPU-401 IRQ */
static int uart_enter[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static bool uart_enter[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for MPU-401 device.");
......
sound/drivers/mts64.c
浏览文件 @ a429638c
......@@ -36,7 +36,7 @@
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static struct platform_device *platform_devices[SNDRV_CARDS];
static int device_count;
......
sound/drivers/opl3/opl3_midi.c
浏览文件 @ a429638c
......@@ -27,7 +27,7 @@
extern char snd_opl3_regmap[MAX_OPL2_VOICES][4];
extern int use_internal_drums;
extern bool use_internal_drums;
static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
struct snd_midi_channel *chan);
......
sound/drivers/opl3/opl3_seq.c
浏览文件 @ a429638c
......@@ -32,7 +32,7 @@ MODULE_AUTHOR("Uros Bizjak <uros@kss-loka.si>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ALSA driver for OPL3 FM synth");
int use_internal_drums = 0;
bool use_internal_drums = 0;
module_param(use_internal_drums, bool, 0444);
MODULE_PARM_DESC(use_internal_drums, "Enable internal OPL2/3 drums.");
......
sound/drivers/pcsp/pcsp.c
浏览文件 @ a429638c
......@@ -25,8 +25,8 @@ MODULE_ALIAS("platform:pcspkr");
static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */
static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */
static int enable = SNDRV_DEFAULT_ENABLE1; /* Enable this card */
static int nopcm; /* Disable PCM capability of the driver */
static bool enable = SNDRV_DEFAULT_ENABLE1; /* Enable this card */
static bool nopcm; /* Disable PCM capability of the driver */
module_param(index, int, 0444);
MODULE_PARM_DESC(index, "Index value for pcsp soundcard.");
......
sound/drivers/pcsp/pcsp_lib.c
浏览文件 @ a429638c
......@@ -14,7 +14,7 @@
#include <asm/io.h>
#include "pcsp.h"
static int nforce_wa;
static bool nforce_wa;
module_param(nforce_wa, bool, 0444);
MODULE_PARM_DESC(nforce_wa, "Apply NForce chipset workaround "
"(expect bad sound)");
......
sound/drivers/portman2x4.c
浏览文件 @ a429638c
......@@ -55,7 +55,7 @@
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static struct platform_device *platform_devices[SNDRV_CARDS];
static int device_count;
......
sound/drivers/serial-u16550.c
浏览文件 @ a429638c
......@@ -69,7 +69,7 @@ static char *adaptor_names[] = {
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x3f8,0x2f8,0x3e8,0x2e8 */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 3,4,5,7,9,10,11,14,15 */
static int speed[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 38400}; /* 9600,19200,38400,57600,115200 */
......@@ -77,7 +77,7 @@ static int base[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 115200}; /* baud bas
static int outs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1}; /* 1 to 16 */
static int ins[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1}; /* 1 to 16 */
static int adaptor[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = SNDRV_SERIAL_SOUNDCANVAS};
static int droponfull[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS -1)] = SNDRV_SERIAL_NORMALBUFF };
static bool droponfull[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS -1)] = SNDRV_SERIAL_NORMALBUFF };
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Serial MIDI.");
......
sound/drivers/virmidi.c
浏览文件 @ a429638c
......@@ -63,7 +63,7 @@ MODULE_SUPPORTED_DEVICE("{{ALSA,Virtual rawmidi device}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 0};
static int midi_devs[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 4};
module_param_array(index, int, NULL, 0444);
......
sound/isa/ad1816a/ad1816a.c
浏览文件 @ a429638c
......@@ -44,7 +44,7 @@ MODULE_SUPPORTED_DEVICE("{{Highscreen,Sound-Boostar 16 3D},"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 1-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
......
sound/isa/ad1848/ad1848.c
浏览文件 @ a429638c
......@@ -43,11 +43,11 @@ MODULE_SUPPORTED_DEVICE("{{Analog Devices,AD1848},"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,11,12,15 */
static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 0,1,3,5,6,7 */
static int thinkpad[SNDRV_CARDS]; /* Thinkpad special case */
static bool thinkpad[SNDRV_CARDS]; /* Thinkpad special case */
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
......
sound/isa/adlib.c
浏览文件 @ a429638c
......@@ -18,7 +18,7 @@ MODULE_LICENSE("GPL");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
module_param_array(index, int, NULL, 0444);
......
sound/isa/als100.c
浏览文件 @ a429638c
......@@ -54,7 +54,7 @@ MODULE_LICENSE("GPL");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
......
sound/isa/azt2320.c
浏览文件 @ a429638c
......@@ -55,7 +55,7 @@ MODULE_SUPPORTED_DEVICE("{{Aztech Systems,PRO16V},"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
......
sound/isa/cmi8330.c
浏览文件 @ a429638c
......@@ -69,9 +69,9 @@ MODULE_SUPPORTED_DEVICE("{{C-Media,CMI8330,isapnp:{CMI0001,@@@0001,@X@0001}}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
#ifdef CONFIG_PNP
static int isapnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static bool isapnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
#endif
static long sbport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
static int sbirq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
......
sound/isa/cs423x/cs4231.c
浏览文件 @ a429638c
......@@ -41,7 +41,7 @@ MODULE_SUPPORTED_DEVICE("{{Crystal Semiconductors,CS4231}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 5,7,9,11,12,15 */
......
sound/isa/cs423x/cs4236.c
浏览文件 @ a429638c
......@@ -74,9 +74,9 @@ MODULE_ALIAS("snd_cs4232");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
#ifdef CONFIG_PNP
static int isapnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
static bool isapnp[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = 1};
#endif
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
static long cport[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* PnP setup */
......
sound/isa/es1688/es1688.c
浏览文件 @ a429638c
......@@ -51,9 +51,9 @@ MODULE_ALIAS("snd_es968");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
#ifdef CONFIG_PNP
static int isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
static bool isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
#endif
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x240,0x260 */
static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* Usually 0x388 */
static long mpu_port[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS - 1)] = -1};
......
sound/isa/es18xx.c
浏览文件 @ a429638c
......@@ -1964,9 +1964,9 @@ MODULE_SUPPORTED_DEVICE("{{ESS,ES1868 PnP AudioDrive},"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP; /* Enable this card */
#ifdef CONFIG_PNP
static int isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
static bool isapnp[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_ISAPNP;
#endif
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x240,0x260,0x280 */
#ifndef CONFIG_PNP
......
sound/isa/galaxy/galaxy.c
浏览文件 @ a429638c
......@@ -35,7 +35,7 @@ MODULE_LICENSE("GPL");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
......
sound/isa/gus/gusclassic.c
浏览文件 @ a429638c
......@@ -42,7 +42,7 @@ MODULE_SUPPORTED_DEVICE("{{Gravis,UltraSound Classic}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x230,0x240,0x250,0x260 */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 3,5,9,11,12,15 */
static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 1,3,5,6,7 */
......
sound/isa/gus/gusextreme.c
浏览文件 @ a429638c
......@@ -46,7 +46,7 @@ MODULE_SUPPORTED_DEVICE("{{Gravis,UltraSound Extreme}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x240,0x260 */
static long gf1_port[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS) - 1] = -1}; /* 0x210,0x220,0x230,0x240,0x250,0x260,0x270 */
static long mpu_port[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS) - 1] = -1}; /* 0x300,0x310,0x320 */
......
sound/isa/gus/gusmax.c
浏览文件 @ a429638c
......@@ -40,7 +40,7 @@ MODULE_SUPPORTED_DEVICE("{{Gravis,UltraSound MAX}}");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE; /* Enable this card */
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT; /* 0x220,0x230,0x240,0x250,0x260 */
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ; /* 2,3,5,9,11,12,15 */
static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA; /* 1,3,5,6,7 */
......
sound/isa/gus/interwave.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/msnd/msnd_pinnacle.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/opl3sa2.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/opti9xx/miro.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/opti9xx/opti92x-ad1848.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/sb/jazz16.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/sb/sb16.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/sb/sb8.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/sc6000.c
浏览文件 @ a429638c
此差异已折叠。
sound/isa/wavefront/wavefront.c
浏览文件 @ a429638c
此差异已折叠。
sound/mips/hal2.c
浏览文件 @ a429638c
此差异已折叠。
sound/mips/sgio2audio.c
浏览文件 @ a429638c
此差异已折叠。
sound/oss/ad1848.c
浏览文件 @ a429638c
此差异已折叠。
sound/oss/msnd_pinnacle.c
浏览文件 @ a429638c
此差异已折叠。
sound/oss/pas2_card.c
浏览文件 @ a429638c
此差异已折叠。
sound/oss/pss.c
浏览文件 @ a429638c
此差异已折叠。
sound/oss/trix.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ac97/ac97_codec.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ad1889.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ali5451/ali5451.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/als300.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/als4000.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/asihpi.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpi.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpi6000.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpi6000.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpi6205.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpi_internal.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpi_version.h 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpicmn.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpicmn.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpidebug.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpidebug.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpidspcd.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpidspcd.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpifunc.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpimsginit.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpimsginit.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpimsgx.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpimsgx.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpioctl.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpioctl.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpios.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpios.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/asihpi/hpipcida.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/atiixp.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/atiixp_modem.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/au88x0/au88x0.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/au88x0/au88x0_core.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/au88x0/au88x0_pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/au88x0/au88x0_xtalk.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/aw2/aw2-alsa.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/azt3328.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/bt87x.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ca0106/ca0106_main.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/cmipci.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/cs4281.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/cs46xx/cs46xx.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/cs5530.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/cs5535audio/cs5535audio.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ctxfi/ctsrc.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ctxfi/cttimer.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ctxfi/xfi.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/echoaudio/echoaudio.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/emu10k1/emu10k1.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/emu10k1/emu10k1_main.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/emu10k1/emu10k1x.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ens1370.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/es1938.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/es1968.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/fm801.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/Makefile
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/alc262_quirks.c 已删除 100644 → 0
浏览文件 @ 5cf9a4e6
此差异已折叠。
sound/pci/hda/alc880_quirks.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/alc882_quirks.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_codec.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_codec.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_intel.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_jack.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_jack.h 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_local.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/hda_proc.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_analog.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_ca0110.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_cirrus.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_conexant.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_hdmi.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_realtek.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_sigmatel.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/hda/patch_via.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ice1712/amp.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ice1712/envy24ht.h
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ice1712/ice1712.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ice1712/ice1724.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/intel8x0.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/intel8x0m.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/korg1212/korg1212.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/lola/lola.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/lx6464es/lx6464es.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/maestro3.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/mixart/mixart.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/nm256/nm256.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/oxygen/oxygen.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/oxygen/virtuoso.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/oxygen/xonar_cs43xx.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/oxygen/xonar_dg.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/oxygen/xonar_wm87x6.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/pcxhr/pcxhr.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/riptide/riptide.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/rme32.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/rme96.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/rme9652/hdsp.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/rme9652/hdspm.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/rme9652/rme9652.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/sis7019.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/sonicvibes.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/trident/trident.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/via82xx.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/via82xx_modem.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/vx222/vx222.c
浏览文件 @ a429638c
此差异已折叠。
sound/pci/ymfpci/ymfpci.c
浏览文件 @ a429638c
此差异已折叠。
sound/pcmcia/pdaudiocf/pdaudiocf.c
浏览文件 @ a429638c
此差异已折叠。
sound/pcmcia/vx/vxpocket.c
浏览文件 @ a429638c
此差异已折叠。
sound/ppc/powermac.c
浏览文件 @ a429638c
此差异已折叠。
sound/sh/aica.c
浏览文件 @ a429638c
此差异已折叠。
sound/sh/sh_dac_audio.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/atmel/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/atmel/atmel-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/atmel/atmel_ssc_dai.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/atmel/sam9g20_wm8731.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/atmel/snd-soc-afeb9260.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/ac97c.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/db1000.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/db1200.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/dbdma2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/dma.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/i2sc.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/psc-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/au1x/psc-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ac97-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ad1836.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ad193x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ad1980.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ad73311.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-i2s-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-ssm2602.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-tdm-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/blackfin/bf5xx-tdm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/88pm860x-codec.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/Makefile
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ad1836.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ad193x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ad193x.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ad1980.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ad73311.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/adau1373.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/adau1701.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/adav80x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ads117x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ak4104.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ak4535.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ak4641.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ak4642.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ak4671.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/alc5623.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/alc5632.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/alc5632.h 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cq93vc.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cs4270.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cs4271.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cs42l51.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cs42l73.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cs42l73.h 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/cx20442.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/da7210.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/dfbmcs320.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/dmic.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/jz4740.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/lm4857.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/max98088.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/max98095.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/max9850.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/pcm3008.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/rt5631.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/sgtl5000.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/sn95031.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/ssm2602.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/sta32x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/stac9766.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/tlv320aic23.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/tlv320aic26.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/tlv320aic32x4.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/tlv320aic3x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/tlv320dac33.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/tpa6130a2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/twl4030.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/twl6040.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/twl6040.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/uda134x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/uda1380.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wl1273.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm1250-ev1.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm2000.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm2000.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm5100-tables.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm5100.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm5100.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8350.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8400.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8510.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8523.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8580.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8711.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8727.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8728.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8731.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8737.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8741.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8750.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8753.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8770.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8776.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8782.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8804.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8900.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8903.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8904.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8940.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8955.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8958-dsp2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8960.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8961.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8962.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8971.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8974.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8978.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8983.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8985.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8988.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8990.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8991.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8993.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8994-tables.c 已删除 100644 → 0
浏览文件 @ 5cf9a4e6
此差异已折叠。
sound/soc/codecs/wm8994.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8994.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8995.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm8996.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm9081.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm9090.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm9705.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm9712.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm9713.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/codecs/wm_hubs.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/davinci/davinci-evm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/davinci/davinci-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/davinci/davinci-mcasp.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/davinci/davinci-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/davinci/davinci-sffsdr.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/davinci/davinci-vcif.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/ep93xx/edb93xx.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/ep93xx/ep93xx-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/ep93xx/ep93xx-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/ep93xx/ep93xx-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/ep93xx/simone.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/ep93xx/snappercl15.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/efika-audio-fabric.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/fsl_dma.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/fsl_ssi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/mpc5200_dma.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/mpc5200_psc_ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/mpc5200_psc_i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/mpc8610_hpcd.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/p1022_ds.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/fsl/pcm030-audio-fabric.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/eukrea-tlv320.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/imx-pcm-dma-mx2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/imx-pcm-fiq.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/imx-ssi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/mx27vis-aic32x4.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/phycore-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/imx/wm1133-ev1.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/jz4740/jz4740-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/jz4740/jz4740-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/jz4740/qi_lb60.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/kirkwood/kirkwood-dma.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/kirkwood/kirkwood-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/kirkwood/kirkwood-t5325.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/kirkwood/kirkwood.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mid-x86/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mid-x86/mfld_machine.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mid-x86/sst_platform.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mid-x86/sst_platform.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mxs/mxs-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mxs/mxs-saif.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/mxs/mxs-sgtl5000.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/nuc900/nuc900-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/nuc900/nuc900-audio.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/nuc900/nuc900-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/Makefile
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/am3517evm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/ams-delta.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/igep0020.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/n810.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap-dmic.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap-dmic.h 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap-hdmi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap-mcbsp.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap-mcpdm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap3evm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap3pandora.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/omap4-hdmi-card.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/osk5912.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/overo.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/rx51.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/sdp3430.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/sdp4430.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/omap/zoom2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/corgi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/e740_wm9705.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/e750_wm9705.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/e800_wm9712.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/em-x270.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/hx4700.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/imote2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/magician.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/mioa701_wm9713.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/palm27x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/poodle.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/pxa-ssp.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/pxa2xx-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/pxa2xx-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/pxa2xx-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/raumfeld.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/saarb.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/spitz.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/tavorevb3.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/tosa.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/z2.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/pxa/zylonite.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/s6000/s6000-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/s6000/s6000-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/s6000/s6105-ipcam.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/Makefile
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/dma.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/goni_wm8994.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/h1940_uda1380.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/idma.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/idma.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/jive_wm8750.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/littlemill.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/lowland.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/neo1973_wm8753.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/rx1950_uda1380.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/s3c2412-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/s3c24xx-i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/s3c24xx_uda134x.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smartq_wm8987.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk2443_wm9710.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk_spdif.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk_wm8580.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk_wm8580pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk_wm8994.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk_wm8994pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/smdk_wm9713.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/spdif.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/samsung/speyside.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/dma-sh7760.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/fsi-ak4642.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/fsi-da7210.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/fsi-hdmi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/fsi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/hac.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/migor.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/sh7760-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/siu_dai.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/sh/ssi.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/soc-cache.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/soc-core.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/soc-dapm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/soc-jack.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/soc-pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/Kconfig
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/Makefile
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_alc5632.c 0 → 100644
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_das.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_i2s.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_i2s.h
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_pcm.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_spdif.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/tegra_wm8903.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/tegra/trimslice.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/txx9/txx9aclc-ac97.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/txx9/txx9aclc-generic.c
浏览文件 @ a429638c
此差异已折叠。
sound/soc/txx9/txx9aclc.c
浏览文件 @ a429638c
此差异已折叠。
sound/sparc/amd7930.c
浏览文件 @ a429638c
此差异已折叠。
sound/sparc/cs4231.c
浏览文件 @ a429638c
此差异已折叠。
sound/sparc/dbri.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/6fire/chip.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/caiaq/device.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/card.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/endpoint.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/format.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/misc/ua101.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/quirks-table.h
浏览文件 @ a429638c
此差异已折叠。
sound/usb/usx2y/us122l.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/usx2y/usb_stream.c
浏览文件 @ a429638c
此差异已折叠。
sound/usb/usx2y/usbusx2y.c
浏览文件 @ a429638c
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或