diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index c6ca6319e4f7f2a2adeb8b98066d38fdf4f0edac..2f74cc4e093e16564548179cd035b1df304112a9 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -10,11 +10,7 @@ * option) any later version. */ -/* - * WARNING: Do not depend on this tree layout remaining static just yet. - * The MPC5200 device tree conventions are still in flux - * Keep an eye on the linuxppc-dev mailing list for more details - */ +/dts-v1/; / { model = "schindler,cm5200"; @@ -29,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -41,34 +37,34 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; - mpc5200_pic: pic@500 { + mpc5200_pic: interrupt-controller@500 { // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -76,108 +72,108 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -186,7 +182,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <1>; // Logical port assignment - reg = <2200 100>; + reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -195,7 +191,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <2>; // Logical port assignment - reg = <2400 100>; + reg = <0x2400 0x100>; interrupts = <2 3 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -204,7 +200,7 @@ device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <5>; // Logical port assignment - reg = <2c00 100>; + reg = <0x2c00 0x100>; interrupts = <2 4 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -212,7 +208,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -223,7 +219,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -237,15 +233,15 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -254,12 +250,12 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 fc000000 2000000>; + ranges = <0 0 0xfc000000 0x2000000>; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; - reg = <0 0 2000000>; + reg = <0 0 0x2000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 09b4e16154d6021938c0f74b2e69d370d45f39e2..2cf9a8768f4482218fe71eb1c2f368aeb3f9220f 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -10,6 +10,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "fsl,lite5200"; compatible = "fsl,lite5200"; @@ -23,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -35,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -58,13 +60,13 @@ #interrupt-cells = <3>; device_type = "interrupt-controller"; compatible = "fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <0>; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -73,63 +75,63 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <1>; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <2>; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <3>; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <4>; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <5>; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <6>; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; cell-index = <7>; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200-rtc"; device_type = "rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -137,43 +139,43 @@ can@900 { compatible = "fsl,mpc5200-mscan"; cell-index = <0>; - interrupts = <2 11 0>; + interrupts = <2 17 0>; interrupt-parent = <&mpc5200_pic>; - reg = <900 80>; + reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; cell-index = <1>; - interrupts = <2 12 0>; + interrupts = <2 18 0>; interrupt-parent = <&mpc5200_pic>; - reg = <980 80>; + reg = <0x980 0x80>; }; gpio@b00 { compatible = "fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -181,17 +183,17 @@ dma-controller@1200 { device_type = "dma-controller"; compatible = "fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 @@ -199,7 +201,7 @@ compatible = "fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -208,7 +210,7 @@ //ac97@2200 { // PSC2 // compatible = "fsl,mpc5200-psc-ac97"; // cell-index = <1>; - // reg = <2200 100>; + // reg = <0x2200 0x100>; // interrupts = <2 2 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -217,7 +219,7 @@ //i2s@2400 { // PSC3 // compatible = "fsl,mpc5200-psc-i2s"; // cell-index = <2>; - // reg = <2400 100>; + // reg = <0x2400 0x100>; // interrupts = <2 3 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -227,8 +229,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <3>; - // reg = <2600 100>; - // interrupts = <2 b 0>; + // reg = <0x2600 0x100>; + // interrupts = <2 11 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -237,8 +239,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <4>; - // reg = <2800 100>; - // interrupts = <2 c 0>; + // reg = <0x2800 0x100>; + // interrupts = <2 12 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -246,7 +248,7 @@ //spi@2c00 { // PSC6 // compatible = "fsl,mpc5200-psc-spi"; // cell-index = <5>; - // reg = <2c00 100>; + // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -254,7 +256,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 800>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -265,11 +267,11 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; - phy0:ethernet-phy@1 { + phy0: ethernet-phy@1 { device_type = "ethernet-phy"; reg = <1>; }; @@ -278,7 +280,7 @@ ata@3a00 { device_type = "ata"; compatible = "fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -288,8 +290,8 @@ #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; cell-index = <0>; - reg = <3d00 40>; - interrupts = <2 f 0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +301,14 @@ #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; cell-index = <1>; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200-sram","sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -316,18 +318,18 @@ #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; + interrupts = <2 8 0 2 9 0 2 10 0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 2e9bc397ae9a1eb40dadbb7e7ab2559d7155b36b..7bd5b9c399b8fe2933c171cb7c7790b1f0cb54a3 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -10,11 +10,7 @@ * option) any later version. */ -/* - * WARNING: Do not depend on this tree layout remaining static just yet. - * The MPC5200 device tree conventions are still in flux - * Keep an eye on the linuxppc-dev mailing list for more details - */ +/dts-v1/; / { model = "fsl,lite5200b"; @@ -29,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -41,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 10000000>; // 256MB + reg = <0x00000000 0x10000000>; // 256MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -64,13 +60,13 @@ #interrupt-cells = <3>; device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <0>; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -79,63 +75,63 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <1>; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <2>; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <3>; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <4>; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <5>; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <6>; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; cell-index = <7>; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; device_type = "rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -143,43 +139,43 @@ can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; cell-index = <0>; - interrupts = <2 11 0>; + interrupts = <2 17 0>; interrupt-parent = <&mpc5200_pic>; - reg = <900 80>; + reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; cell-index = <1>; - interrupts = <2 12 0>; + interrupts = <2 18 0>; interrupt-parent = <&mpc5200_pic>; - reg = <980 80>; + reg = <0x980 0x80>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -187,17 +183,17 @@ dma-controller@1200 { device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 @@ -205,7 +201,7 @@ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment cell-index = <0>; - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -214,7 +210,7 @@ //ac97@2200 { // PSC2 // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; // cell-index = <1>; - // reg = <2200 100>; + // reg = <0x2200 0x100>; // interrupts = <2 2 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -223,7 +219,7 @@ //i2s@2400 { // PSC3 // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible // cell-index = <2>; - // reg = <2400 100>; + // reg = <0x2400 0x100>; // interrupts = <2 3 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -233,8 +229,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <3>; - // reg = <2600 100>; - // interrupts = <2 b 0>; + // reg = <0x2600 0x100>; + // interrupts = <2 11 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -243,8 +239,8 @@ // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <4>; - // reg = <2800 100>; - // interrupts = <2 c 0>; + // reg = <0x2800 0x100>; + // interrupts = <2 12 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -252,7 +248,7 @@ //spi@2c00 { // PSC6 // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; // cell-index = <5>; - // reg = <2c00 100>; + // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; // interrupt-parent = <&mpc5200_pic>; //}; @@ -260,7 +256,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -271,11 +267,11 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; - phy0:ethernet-phy@0 { + phy0: ethernet-phy@0 { device_type = "ethernet-phy"; reg = <0>; }; @@ -284,7 +280,7 @@ ata@3a00 { device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -294,8 +290,8 @@ #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; cell-index = <0>; - reg = <3d00 40>; - interrupts = <2 f 0>; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -305,14 +301,14 @@ #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; cell-index = <1>; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -322,23 +318,23 @@ #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; + interrupts = <2 8 0 2 9 0 2 10 0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 20000000 - 02000000 0 a0000000 a0000000 0 10000000 - 01000000 0 00000000 b0000000 0 01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 2b0dde058f8e14d3e2b788e02f2a51d36464c90a..9e3c921be16473b79934384b6145c97b17a3e186 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -10,6 +10,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "promess,motionpro"; compatible = "promess,motionpro"; @@ -23,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -35,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -57,12 +59,12 @@ interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -70,118 +72,118 @@ timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <610 10>; - interrupts = <1 a 0>; + reg = <0x610 0x10>; + interrupts = <1 10 0>; interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <620 10>; - interrupts = <1 b 0>; + reg = <0x620 0x10>; + interrupts = <1 11 0>; interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <630 10>; - interrupts = <1 c 0>; + reg = <0x630 0x10>; + interrupts = <1 12 0>; interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <640 10>; - interrupts = <1 d 0>; + reg = <0x640 0x10>; + interrupts = <1 13 0>; interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <650 10>; - interrupts = <1 e 0>; + reg = <0x650 0x10>; + interrupts = <1 14 0>; interrupt-parent = <&mpc5200_pic>; }; motionpro-led@660 { // Motion-PRO status LED compatible = "promess,motionpro-led"; label = "motionpro-statusled"; - reg = <660 10>; - interrupts = <1 f 0>; + reg = <0x660 0x10>; + interrupts = <1 15 0>; interrupt-parent = <&mpc5200_pic>; - blink-delay = <64>; // 100 msec + blink-delay = <100>; // 100 msec }; motionpro-led@670 { // Motion-PRO ready LED compatible = "promess,motionpro-led"; label = "motionpro-readyled"; - reg = <670 10>; - interrupts = <1 10 0>; + reg = <0x670 0x10>; + interrupts = <1 16 0>; interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <800 100>; + reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; interrupt-parent = <&mpc5200_pic>; }; - mscan@980 { + can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 12 0>; + interrupts = <2 18 0>; interrupt-parent = <&mpc5200_pic>; - reg = <980 80>; + reg = <0x980 0x80>; }; gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = ; + reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = ; - interrupts = <2 d 0 2 e 0>; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -190,7 +192,7 @@ spi@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; cell-index = <1>; - reg = <2200 100>; + reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -200,15 +202,15 @@ device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; port-number = <4>; // Logical port assignment - reg = <2800 100>; - interrupts = <2 c 0>; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -219,7 +221,7 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -231,7 +233,7 @@ ata@3a00 { compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -240,21 +242,21 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { device_type = "rtc"; compatible = "dallas,ds1339"; - reg = <68>; + reg = <0x68>; }; }; sram@8000 { compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -262,15 +264,15 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 ff000000 01000000 - 1 0 50000000 00010000 - 2 0 50010000 00010000 - 3 0 50020000 00010000>; + ranges = <0 0 0xff000000 0x01000000 + 1 0 0x50000000 0x00010000 + 2 0 0x50010000 0x00010000 + 3 0 0x50020000 0x00010000>; // 8-bit DualPort SRAM on LocalPlus Bus CS1 kollmorgen@1,0 { compatible = "promess,motionpro-kollmorgen"; - reg = <1 0 10000>; + reg = <1 0 0x10000>; interrupts = <1 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -278,13 +280,13 @@ // 8-bit board CPLD on LocalPlus Bus CS2 cpld@2,0 { compatible = "promess,motionpro-cpld"; - reg = <2 0 10000>; + reg = <2 0 0x10000>; }; // 8-bit custom Anybus Module on LocalPlus Bus CS3 anybus@3,0 { compatible = "promess,motionpro-anybus"; - reg = <3 0 10000>; + reg = <3 0 0x10000>; }; pro_module_general@3,0 { compatible = "promess,pro_module_general"; @@ -292,13 +294,13 @@ }; pro_module_dio@3,800 { compatible = "promess,pro_module_dio"; - reg = <3 800 2>; + reg = <3 0x800 2>; }; // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; - reg = <0 0 01000000>; + reg = <0 0 0x01000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index 65bcea6a0173ab9b1a475e4b2f2210d297fc746b..773a68e0005813de3918fa8031538ae50721a186 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -10,6 +10,8 @@ * option) any later version. */ +/dts-v1/; + / { model = "tqc,tqm5200"; compatible = "tqc,tqm5200"; @@ -23,10 +25,10 @@ PowerPC,5200@0 { device_type = "cpu"; reg = <0>; - d-cache-line-size = <20>; - i-cache-line-size = <20>; - d-cache-size = <4000>; // L1, 16K - i-cache-size = <4000>; // L1, 16K + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <0>; // from bootloader bus-frequency = <0>; // from bootloader clock-frequency = <0>; // from bootloader @@ -35,21 +37,21 @@ memory { device_type = "memory"; - reg = <00000000 04000000>; // 64MB + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200-immr"; - ranges = <0 f0000000 0000c000>; - reg = ; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; bus-frequency = <0>; // from bootloader system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200-cdm"; - reg = <200 38>; + reg = <0x200 0x38>; }; mpc5200_pic: interrupt-controller@500 { @@ -57,12 +59,12 @@ interrupt-controller; #interrupt-cells = <3>; compatible = "fsl,mpc5200-pic"; - reg = <500 80>; + reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - reg = <600 10>; + reg = <0x600 0x10>; interrupts = <1 9 0>; interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; @@ -70,38 +72,38 @@ gpio@b00 { compatible = "fsl,mpc5200-gpio"; - reg = ; + reg = <0xb00 0x40>; interrupts = <1 7 0>; interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; - reg = <1000 ff>; + reg = <0x1000 0xff>; interrupts = <2 6 0>; interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { compatible = "fsl,mpc5200-bestcomm"; - reg = <1200 80>; + reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 a 0 3 b 0 - 3 c 0 3 d 0 3 e 0 3 f 0>; + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { compatible = "fsl,mpc5200-xlb"; - reg = <1f00 100>; + reg = <0x1f00 0x100>; }; serial@2000 { // PSC1 device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <0>; // Logical port assignment - reg = <2000 100>; + reg = <0x2000 0x100>; interrupts = <2 1 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -110,7 +112,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <1>; // Logical port assignment - reg = <2200 100>; + reg = <0x2200 0x100>; interrupts = <2 2 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -119,7 +121,7 @@ device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; port-number = <2>; // Logical port assignment - reg = <2400 100>; + reg = <0x2400 0x100>; interrupts = <2 3 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -127,7 +129,7 @@ ethernet@3000 { device_type = "network"; compatible = "fsl,mpc5200-fec"; - reg = <3000 400>; + reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; @@ -137,8 +139,8 @@ mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <3000 400>; // fec range, since we need to setup fec interrupts + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. interrupt-parent = <&mpc5200_pic>; @@ -150,7 +152,7 @@ ata@3a00 { compatible = "fsl,mpc5200-ata"; - reg = <3a00 100>; + reg = <0x3a00 0x100>; interrupts = <2 7 0>; interrupt-parent = <&mpc5200_pic>; }; @@ -159,21 +161,21 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - reg = <3d40 40>; - interrupts = <2 10 0>; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { device_type = "rtc"; compatible = "dallas,ds1307"; - reg = <68>; + reg = <0x68>; }; }; sram@8000 { compatible = "fsl,mpc5200-sram"; - reg = <8000 4000>; + reg = <0x8000 0x4000>; }; }; @@ -182,11 +184,11 @@ compatible = "fsl,lpb"; #address-cells = <2>; #size-cells = <1>; - ranges = <0 0 fc000000 02000000>; + ranges = <0 0 0xfc000000 0x02000000>; flash@0,0 { compatible = "cfi-flash"; - reg = <0 0 02000000>; + reg = <0 0 0x02000000>; bank-width = <4>; device-width = <2>; #size-cells = <1>; @@ -200,18 +202,18 @@ #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200-pci"; - reg = ; - interrupt-map-mask = ; - interrupt-map = ; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 a 0>; + interrupts = <2 8 0 2 9 0 2 10 0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; - ranges = <42000000 0 80000000 80000000 0 10000000 - 02000000 0 90000000 90000000 0 10000000 - 01000000 0 00000000 a0000000 0 01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; }; };