提交 a114580f 编写于 作者: N Nikita Yushchenko 提交者: Mark Brown

ASoC: tpa6130a2: fix volume setting when no stream is running

After moving tpa6130a2 power management to DAPM, if chip can be physically
powered off (either reset_gpio is defined, or regulator indeed removes
power), then volume change no longer works unless chip is on due to
a running stream.

Fix that by entering regcache cache_only mode while chip is off.

Move regcache calls to tpa6130a2_power() to get them at driver init time
as well.
Signed-off-by: NNikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 29b4817d
......@@ -52,7 +52,7 @@ struct tpa6130a2_data {
static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable)
{
int ret;
int ret = 0, ret2;
if (enable) {
ret = regulator_enable(data->supply);
......@@ -64,20 +64,34 @@ static int tpa6130a2_power(struct tpa6130a2_data *data, bool enable)
/* Power on */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 1);
/* Sync registers */
regcache_cache_only(data->regmap, false);
ret = regcache_sync(data->regmap);
if (ret != 0) {
dev_err(data->dev,
"Failed to sync registers: %d\n", ret);
goto regcache_sync_failed;
}
} else {
/* Powered off device does not retain registers. While device
* is off, any register updates (i.e. volume changes) should
* happen in cache only.
*/
regcache_mark_dirty(data->regmap);
regcache_sync_failed:
regcache_cache_only(data->regmap, true);
/* Power off */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 0);
ret = regulator_disable(data->supply);
if (ret != 0) {
ret2 = regulator_disable(data->supply);
if (ret2 != 0) {
dev_err(data->dev,
"Failed to disable supply: %d\n", ret);
return ret;
"Failed to disable supply: %d\n", ret2);
return ret ? ret : ret2;
}
/* device regs does not match the cache state anymore */
regcache_mark_dirty(data->regmap);
}
return ret;
......@@ -88,25 +102,14 @@ static int tpa6130a2_power_event(struct snd_soc_dapm_widget *w,
{
struct snd_soc_component *c = snd_soc_dapm_to_component(w->dapm);
struct tpa6130a2_data *data = snd_soc_component_get_drvdata(c);
int ret;
/* before widget power up */
if (SND_SOC_DAPM_EVENT_ON(event)) {
/* Turn on the chip */
tpa6130a2_power(data, true);
/* Sync the registers */
ret = regcache_sync(data->regmap);
if (ret < 0) {
dev_err(c->dev, "Failed to initialize chip\n");
tpa6130a2_power(data, false);
return ret;
}
/* after widget power down */
/* Before widget power up: turn chip on, sync registers */
return tpa6130a2_power(data, true);
} else {
tpa6130a2_power(data, false);
/* After widget power down: turn chip off */
return tpa6130a2_power(data, false);
}
return 0;
}
/*
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册