Merge branch 'fixes' into for-linus

Conflicts:
	arch/arm/kernel/smp.c

Documentation/ABI/testing/ima_policy

@@ -12,11 +12,14 @@ Description:
 		then closing the file.  The new policy takes effect after
 		the file ima/policy is closed.
 
+		IMA appraisal, if configured, uses these file measurements
+		for local measurement appraisal.
+
 		rule format: action [condition ...]
 
-		action: measure | dont_measure
+		action: measure | dont_measure | appraise | dont_appraise | audit
 		condition:= base | lsm
-			base:	[[func=] [mask=] [fsmagic=] [uid=]]
+			base:	[[func=] [mask=] [fsmagic=] [uid=] [fowner]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
 
@@ -24,36 +27,50 @@ Description:
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			uid:= decimal value
+			fowner:=decimal value
 		lsm:  	are LSM specific
 
 		default policy:
 			# PROC_SUPER_MAGIC
 			dont_measure fsmagic=0x9fa0
+			dont_appraise fsmagic=0x9fa0
 			# SYSFS_MAGIC
 			dont_measure fsmagic=0x62656572
+			dont_appraise fsmagic=0x62656572
 			# DEBUGFS_MAGIC
 			dont_measure fsmagic=0x64626720
+			dont_appraise fsmagic=0x64626720
 			# TMPFS_MAGIC
 			dont_measure fsmagic=0x01021994
+			dont_appraise fsmagic=0x01021994
+			# RAMFS_MAGIC
+			dont_measure fsmagic=0x858458f6
+			dont_appraise fsmagic=0x858458f6
 			# SECURITYFS_MAGIC
 			dont_measure fsmagic=0x73636673
+			dont_appraise fsmagic=0x73636673
 
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
 			measure func=FILE_CHECK mask=MAY_READ uid=0
+			appraise fowner=0
 
 		The default policy measures all executables in bprm_check,
 		all files mmapped executable in file_mmap, and all files
-		open for read by root in do_filp_open.
+		open for read by root in do_filp_open.  The default appraisal
+		policy appraises all files owned by root.
 
 		Examples of LSM specific definitions:
 
 		SELinux:
 			# SELINUX_MAGIC
-			dont_measure fsmagic=0xF97CFF8C
+			dont_measure fsmagic=0xf97cff8c
+			dont_appraise fsmagic=0xf97cff8c
 
 			dont_measure obj_type=var_log_t
+			dont_appraise obj_type=var_log_t
 			dont_measure obj_type=auditd_log_t
+			dont_appraise obj_type=auditd_log_t
 			measure subj_user=system_u func=FILE_CHECK mask=MAY_READ
 			measure subj_role=system_r func=FILE_CHECK mask=MAY_READ
 

Documentation/ABI/testing/sysfs-bus-rbd

@@ -25,6 +25,10 @@ client_id
 
 	The ceph unique client id that was assigned for this specific session.
 
+features
+
+	A hexadecimal encoding of the feature bits for this image.
+
 major
 
 	The block device major number.
@@ -33,6 +37,11 @@ name
 
 	The name of the rbd image.
 
+image_id
+
+	The unique id for the rbd image.  (For rbd image format 1
+	this is empty.)
+
 pool
 
 	The name of the storage pool where this rbd image resides.
@@ -57,12 +66,6 @@ current_snap
 
 	The current snapshot for which the device is mapped.
 
-create_snap
-
-	Create a snapshot:
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-
 snap_*
 
 	A directory per each snapshot
@@ -79,4 +82,7 @@ snap_size
 
 	The size of the image when this snapshot was taken.
 
+snap_features
+
+	A hexadecimal encoding of the feature bits for this snapshot.
 

Documentation/ABI/testing/sysfs-bus-usb

@@ -220,3 +220,10 @@ Description:
 		If the device doesn't support LTM, the file will read "no".
 		The file will be present for all speeds of USB devices, and will
 		always read "no" for USB 1.1 and USB 2.0 devices.
+
+What:		/sys/bus/usb/devices/.../(hub interface)/portX
+Date:		August 2012
+Contact:	Lan Tianyu <tianyu.lan@intel.com>
+Description:
+		The /sys/bus/usb/devices/.../(hub interface)/portX
+		is usb port device's sysfs directory.

Documentation/ABI/testing/sysfs-class-extcon

@@ -13,7 +13,7 @@ Description:
 		accessory cables have such capability. For example,
 		the 30-pin port of Nuri board (/arch/arm/mach-exynos)
 		may have both HDMI and Charger attached, or analog audio,
-		video, and USB cables attached simulteneously.
+		video, and USB cables attached simultaneously.
 
 		If there are cables mutually exclusive with each other,
 		such binary relations may be expressed with extcon_dev's
@@ -35,7 +35,7 @@ Description:
 		The /sys/class/extcon/.../state shows and stores the cable
 		attach/detach information of the corresponding extcon object.
 		If the extcon object has an optional callback "show_state"
-		defined, the showing function is overriden with the optional
+		defined, the showing function is overridden with the optional
 		callback.
 
 		If the default callback for showing function is used, the
@@ -46,19 +46,19 @@ Description:
 		TA=1
 		EAR_JACK=0
 		#
-		In this example, the extcon device have USB_OTG and TA
+		In this example, the extcon device has USB_OTG and TA
 		cables attached and HDMI and EAR_JACK cables detached.
 
 		In order to update the state of an extcon device, enter a hex
-		state number starting with 0x.
-		 echo 0xHEX > state
+		state number starting with 0x:
+		# echo 0xHEX > state
 
-		This updates the whole state of the extcon dev.
+		This updates the whole state of the extcon device.
 		Inputs of all the methods are required to meet the
-		mutually_exclusive contidions if they exist.
+		mutually_exclusive conditions if they exist.
 
 		It is recommended to use this "global" state interface if
-		you need to enter the value atomically. The later state
+		you need to set the value atomically. The later state
 		interface associated with each cable cannot update
 		multiple cable states of an extcon device simultaneously.
 
@@ -73,7 +73,7 @@ What:		/sys/class/extcon/.../cable.x/state
 Date:		February 2012
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/extcon/.../cable.x/name shows and stores the
+		The /sys/class/extcon/.../cable.x/state shows and stores the
 		state of cable "x" (integer between 0 and 31) of an extcon
 		device. The state value is either 0 (detached) or 1
 		(attached).
@@ -83,8 +83,8 @@ Date:		December 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		Shows the relations of mutually exclusiveness. For example,
-		if the mutually_exclusive array of extcon_dev is
-		{0x3, 0x5, 0xC, 0x0}, the, the output is:
+		if the mutually_exclusive array of extcon device is
+		{0x3, 0x5, 0xC, 0x0}, then the output is:
 		# ls mutually_exclusive/
 		0x3
 		0x5

Documentation/ABI/testing/sysfs-class-regulator

@@ -349,3 +349,24 @@ Description:
 
 		This will be one of the same strings reported by
 		the "state" attribute.
+
+What:		/sys/class/regulator/.../bypass
+Date:		September 2012
+KernelVersion:	3.7
+Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+Description:
+		Some regulator directories will contain a field called
+		bypass.  This indicates if the device is in bypass mode.
+
+		This will be one of the following strings:
+
+		'enabled'
+		'disabled'
+		'unknown'
+
+		'enabled' means the regulator is in bypass mode.
+
+		'disabled' means that the regulator is regulating.
+
+		'unknown' means software cannot determine the state, or
+		the reported state is invalid.

Documentation/ABI/testing/sysfs-devices-firmware_node

+What:		/sys/devices/.../firmware_node/
+Date:		September 2012
+Contact:	<>
+Description:
+		The /sys/devices/.../firmware_node directory contains attributes
+		allowing the user space to check and modify some firmware
+		related properties of given device.
+
+What:		/sys/devices/.../firmware_node/description
+Date:		September 2012
+Contact:	Lance Ortiz <lance.ortiz@hp.com>
+Description:
+		The /sys/devices/.../firmware/description attribute contains a string
+		that describes the device as provided by the _STR method in the ACPI
+		namespace.  This attribute is read-only.  If the device does not have
+		an _STR method associated with it in the ACPI namespace, this
+		attribute is not present.

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -176,3 +176,14 @@ Description:	Disable L3 cache indices
 		All AMD processors with L3 caches provide this functionality.
 		For details, see BKDGs at
 		http://developer.amd.com/documentation/guides/Pages/default.aspx
+
+
+What:		/sys/devices/system/cpu/cpufreq/boost
+Date:		August 2012
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Processor frequency boosting control
+
+		This switch controls the boost setting for the whole system.
+		Boosting allows the CPU and the firmware to run at a frequency
+		beyound it's nominal limit.
+		More details can be found in Documentation/cpu-freq/boost.txt

Documentation/ABI/testing/sysfs-driver-ppi

+What:		/sys/devices/pnp0/<bus-num>/ppi/
+Date:		August 2012
+Kernel Version:	3.6
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This folder includes the attributes related with PPI (Physical
+		Presence Interface). Only if TPM is supported by BIOS, this
+		folder makes sence. The folder path can be got by command
+		'find /sys/ -name 'pcrs''. For the detail information of PPI,
+		please refer to the PPI specification from
+		http://www.trustedcomputinggroup.org/
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/version
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the version of the PPI supported by the
+		platform.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/request
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the request for an operation to be
+		executed in the pre-OS environment. It is the only input from
+		the OS to the pre-OS environment. The request should be an
+		integer value range from 1 to 160, and 0 means no request.
+		This file can be read and written.
+
+What:		/sys/devices/pnp0/00:<bus-num>/ppi/response
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the response to the most recent operation
+		request it acted upon. The format is "<request> <response num>
+		: <response description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/transition_action
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows the platform-specific action that should
+		take place in order to transition to the BIOS for execution of
+		a requested operation. The format is "<action num>: <action
+		description>".
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/tcg_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the requests defined by TCG, i.e. requests from 1 to 22.
+		The format is "<request> <status num>: <status description>".
+		This attribute is only supported by PPI version 1.2+.
+		This file is readonly.
+
+What:		/sys/devices/pnp0/<bus-num>/ppi/vs_operations
+Date:		August 2012
+Contact:	xiaoyan.zhang@intel.com
+Description:
+		This attribute shows whether it is allowed to request an
+		operation to be executed in the pre-OS environment by the BIOS
+		for the verdor specific requests, i.e. requests from 128 to
+		255. The format is same with tcg_operations. This attribute
+		is also only supported by PPI version 1.2+.
+		This file is readonly.

Documentation/ABI/testing/sysfs-driver-wacom

+WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
+Date:		June 2012
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/oled*_img files control
+		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
+		has to contain 256 bytes (64x32 px 1 bit colour). The format
+		is the same as PBM image 62x32px without header (64 bits per
+		horizontal line, 32 lines). An example of setting OLED No. 0:
+		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
+		The attribute is read only and no local copy of the image is
+		stored.
+
 What:		/sys/class/hidraw/hidraw*/device/speed
 Date:		April 2010
 Kernel Version:	2.6.35

Documentation/ABI/testing/sysfs-fs-ext4

@@ -96,3 +96,16 @@ Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
 		The maximum number of megabytes the writeback code will
 		try to write out before move on to another inode.
+
+What:		/sys/fs/ext4/<disk>/extent_max_zeroout_kb
+Date:		August 2012
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of kilobytes which will be zeroed
+		out in preference to creating a new uninitialized
+		extent when manipulating an inode's extent tree.  Note
+		that using a larger value will increase the
+		variability of time necessary to complete a random
+		write operation (since a 4k random write might turn
+		into a much larger write due to the zeroout
+		operation).

Documentation/ABI/testing/sysfs-ptp

@@ -19,7 +19,11 @@ Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the name of the PTP hardware clock
-		as a human readable string.
+		as a human readable string. The purpose of this
+		attribute is to provide the user with a "friendly
+		name" and to help distinguish PHY based devices from
+		MAC based ones. The string does not necessarily have
+		to be any kind of unique id.
 
 What:		/sys/class/ptp/ptpN/max_adjustment
 Date:		September 2010

Documentation/ABI/testing/sysfs-tty

@@ -17,3 +17,12 @@ Description:
 		 device, like 'tty1'.
 		 The file supports poll() to detect virtual
 		 console switches.
+
+What:		/sys/class/tty/ttyS0/uartclk
+Date:		Sep 2012
+Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
+Description:
+		 Shows the current uartclk value associated with the
+		 UART port in serial_core, that is bound to TTY like ttyS0.
+		 uartclk = 16 * baud_base
+

Documentation/CodingStyle

@@ -454,6 +454,16 @@ The preferred style for long (multi-line) comments is:
 	 * with beginning and ending almost-blank lines.
 	 */
 
+For files in net/ and drivers/net/ the preferred style for long (multi-line)
+comments is a little different.
+
+	/* The preferred comment style for files in net/ and drivers/net
+	 * looks like this.
+	 *
+	 * It is nearly the same as the generally preferred comment style,
+	 * but there is no initial almost-blank line.
+	 */
+
 It's also important to comment data, whether they are basic types or derived
 types.  To this end, use just one data declaration per line (no commas for
 multiple data declarations).  This leaves you room for a small comment on each

Documentation/DocBook/media/Makefile

@@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml
 	@(								\
 	for ident in $(IOCTLS) ; do					\
 	  entity=`echo $$ident | tr _ -` ;				\
-	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
+	  id=`grep "<refname>$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \
 	  echo "<!ENTITY $$entity \"<link"				\
 	    "linkend='$$id'><constant>$$ident</constant></link>\">"	\
 	  >>$@ ;							\

Documentation/DocBook/media/dvb/audio.xml

 <title>DVB Audio Device</title>
 <para>The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It
 can be accessed through <emphasis role="tt">/dev/dvb/adapter0/audio0</emphasis>. Data types and and
-ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/video.h</emphasis> in your
+ioctl definitions can be accessed by including <emphasis role="tt">linux/dvb/audio.h</emphasis> in your
 application.
 </para>
 <para>Please note that some DVB cards don&#8217;t have their own MPEG decoder, which results in
 the omission of the audio and video device.
 </para>
+<para>
+These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use
+of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls
+have been created to replace that functionality.</para>
 
 <section id="audio_data_types">
 <title>Audio Data Types</title>
@@ -558,6 +562,8 @@ role="subsection"><title>AUDIO_SELECT_SOURCE</title>
 role="subsection"><title>AUDIO_SET_MUTE</title>
 <para>DESCRIPTION
 </para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+&VIDIOC-DECODER-CMD; with the <constant>V4L2_DEC_CMD_START_MUTE_AUDIO</constant> flag instead.</para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>This ioctl call asks the audio device to mute the stream that is currently being
@@ -730,6 +736,8 @@ role="subsection"><title>AUDIO_SET_BYPASS_MODE</title>
 role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
 <para>DESCRIPTION
 </para>
+<para>This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2
+<constant>V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK</constant> control instead.</para>
 <informaltable><tgroup cols="1"><tbody><row><entry
  align="char">
 <para>This ioctl call asks the Audio Device to select the requested channel if possible.</para>
@@ -772,6 +780,109 @@ role="subsection"><title>AUDIO_CHANNEL_SELECT</title>
  </row></tbody></tgroup></informaltable>
 &return-value-dvb;
 
+</section><section id="AUDIO_BILINGUAL_CHANNEL_SELECT"
+role="subsection"><title>AUDIO_BILINGUAL_CHANNEL_SELECT</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. It has been replaced by
+the V4L2 <constant>V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK</constant> control
+for MPEG decoders controlled through V4L2.</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>audio_channel_select_t
+ch</para>
+</entry><entry
+ align="char">
+<para>Select the output format of the audio (mono left/right,
+ stereo).</para>
+</entry>
+ </row>
+</tbody></tgroup></informaltable>
+&return-value-dvb;
+
+</section><section id="AUDIO_GET_PTS"
+role="subsection"><title>AUDIO_GET_PTS</title>
+<para>DESCRIPTION
+</para>
+<para>This ioctl is obsolete. Do not use in new drivers. If you need this functionality,
+then please contact the linux-media mailing list (&v4l-ml;).</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl call asks the Audio Device to return the current PTS timestamp.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(int fd, int request =
+ AUDIO_GET_PTS, __u64 *pts);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals AUDIO_GET_PTS for this
+ command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u64 *pts
+</para>
+</entry><entry
+ align="char">
+<para>Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1.
+</para>
+<para>
+The PTS should belong to the currently played
+frame if possible, but may also be a value close to it
+like the PTS of the last decoded frame or the last PTS
+extracted by the PES parser.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+
 </section><section id="AUDIO_GET_STATUS"
 role="subsection"><title>AUDIO_GET_STATUS</title>
 <para>DESCRIPTION

Documentation/DocBook/media/dvb/ca.xml

@@ -226,4 +226,357 @@ typedef struct ca_pid {
 </entry>
  </row></tbody></tgroup></informaltable>
  </section>
+
+<section id="CA_RESET"
+role="subsection"><title>CA_RESET</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_RESET);
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_RESET for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_CAP"
+role="subsection"><title>CA_GET_CAP</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_CAP,
+ ca_caps_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_CAP for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_caps_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_SLOT_INFO"
+role="subsection"><title>CA_GET_SLOT_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_SLOT_INFO,
+ ca_slot_info_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_SLOT_INFO for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_slot_info_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_DESCR_INFO"
+role="subsection"><title>CA_GET_DESCR_INFO</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_DESCR_INFO,
+ ca_descr_info_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_DESCR_INFO for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_descr_info_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_GET_MSG"
+role="subsection"><title>CA_GET_MSG</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_GET_MSG,
+ ca_msg_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_GET_MSG for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_msg_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_SEND_MSG"
+role="subsection"><title>CA_SEND_MSG</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_SEND_MSG,
+ ca_msg_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_SEND_MSG for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_msg_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_SET_DESCR"
+role="subsection"><title>CA_SET_DESCR</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_SET_DESCR,
+ ca_descr_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_SET_DESCR for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_descr_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="CA_SET_PID"
+role="subsection"><title>CA_SET_PID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = CA_SET_PID,
+ ca_pid_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals CA_SET_PID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>ca_pid_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
 </section>

Documentation/DocBook/media/dvb/demux.xml

@@ -899,4 +899,232 @@ typedef enum {
 <para>Invalid stc number.</para>
 </entry>
  </row></tbody></tgroup></informaltable>
- </section></section>
+ </section>
+
+<section id="DMX_GET_PES_PIDS"
+role="subsection"><title>DMX_GET_PES_PIDS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_GET_PES_PIDS,
+ __u16[5]);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_PES_PIDS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16[5]
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_GET_CAPS"
+role="subsection"><title>DMX_GET_CAPS</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_GET_CAPS,
+ dmx_caps_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_GET_CAPS for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_caps_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_SET_SOURCE"
+role="subsection"><title>DMX_SET_SOURCE</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_SET_SOURCE,
+ dmx_source_t *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_SET_SOURCE for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>dmx_source_t *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_ADD_PID"
+role="subsection"><title>DMX_ADD_PID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_ADD_PID,
+ __u16 *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_ADD_PID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="DMX_REMOVE_PID"
+role="subsection"><title>DMX_REMOVE_PID</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = DMX_REMOVE_PID,
+ __u16 *);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals DMX_REMOVE_PID for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>__u16 *
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+
+</section>

Documentation/DocBook/media/dvb/dvbapi.xml

@@ -28,7 +28,7 @@
 	<holder>Convergence GmbH</holder>
 </copyright>
 <copyright>
-	<year>2009-2011</year>
+	<year>2009-2012</year>
 	<holder>Mauro Carvalho Chehab</holder>
 </copyright>
 
@@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher
 
 
 <title>LINUX DVB API</title>
-<subtitle>Version 5.2</subtitle>
+<subtitle>Version 5.8</subtitle>
 <!-- ADD THE CHAPTERS HERE -->
   <chapter id="dvb_introdution">
     &sub-intro;

Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -194,6 +194,7 @@ get/set up to 64 properties. The actual meaning of each property is described on
 	APSK_16,
 	APSK_32,
 	DQPSK,
+	QAM_4_NR,
  } fe_modulation_t;
 </programlisting>
 	</section>
@@ -265,6 +266,7 @@ typedef enum fe_code_rate {
 	FEC_AUTO,
 	FEC_3_5,
 	FEC_9_10,
+	FEC_2_5,
 } fe_code_rate_t;
 	</programlisting>
 	<para>which correspond to error correction rates of 1/2, 2/3, etc.,
@@ -351,7 +353,7 @@ typedef enum fe_delivery_system {
 	SYS_ISDBC,
 	SYS_ATSC,
 	SYS_ATSCMH,
-	SYS_DMBTH,
+	SYS_DTMB,
 	SYS_CMMB,
 	SYS_DAB,
 	SYS_DVBT2,
@@ -567,28 +569,33 @@ typedef enum fe_delivery_system {
 			<title><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></title>
 			<para>RS frame mode.</para>
 			<para>Possible values are:</para>
+		  <para id="atscmh-rs-frame-mode">
 <programlisting>
 typedef enum atscmh_rs_frame_mode {
 	ATSCMH_RSFRAME_PRI_ONLY  = 0,
 	ATSCMH_RSFRAME_PRI_SEC   = 1,
 } atscmh_rs_frame_mode_t;
 </programlisting>
+		  </para>
 		</section>
 		<section id="DTV-ATSCMH-RS-FRAME-ENSEMBLE">
 			<title><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></title>
 			<para>RS frame ensemble.</para>
 			<para>Possible values are:</para>
+		  <para id="atscmh-rs-frame-ensemble">
 <programlisting>
 typedef enum atscmh_rs_frame_ensemble {
 	ATSCMH_RSFRAME_ENS_PRI   = 0,
 	ATSCMH_RSFRAME_ENS_SEC   = 1,
 } atscmh_rs_frame_ensemble_t;
 </programlisting>
+		  </para>
 		</section>
 		<section id="DTV-ATSCMH-RS-CODE-MODE-PRI">
 			<title><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></title>
 			<para>RS code mode (primary).</para>
 			<para>Possible values are:</para>
+		  <para id="atscmh-rs-code-mode">
 <programlisting>
 typedef enum atscmh_rs_code_mode {
 	ATSCMH_RSCODE_211_187    = 0,
@@ -596,6 +603,7 @@ typedef enum atscmh_rs_code_mode {
 	ATSCMH_RSCODE_235_187    = 2,
 } atscmh_rs_code_mode_t;
 </programlisting>
+		  </para>
 		</section>
 		<section id="DTV-ATSCMH-RS-CODE-MODE-SEC">
 			<title><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></title>
@@ -613,23 +621,27 @@ typedef enum atscmh_rs_code_mode {
 			<title><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></title>
 			<para>Series Concatenated Convolutional Code Block Mode.</para>
 			<para>Possible values are:</para>
+		  <para id="atscmh-sccc-block-mode">
 <programlisting>
 typedef enum atscmh_sccc_block_mode {
 	ATSCMH_SCCC_BLK_SEP      = 0,
 	ATSCMH_SCCC_BLK_COMB     = 1,
 } atscmh_sccc_block_mode_t;
 </programlisting>
+		  </para>
 		</section>
 		<section id="DTV-ATSCMH-SCCC-CODE-MODE-A">
 			<title><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></title>
 			<para>Series Concatenated Convolutional Code Rate.</para>
 			<para>Possible values are:</para>
+		  <para id="atscmh-sccc-code-mode">
 <programlisting>
 typedef enum atscmh_sccc_code_mode {
 	ATSCMH_SCCC_CODE_HLF     = 0,
 	ATSCMH_SCCC_CODE_QTR     = 1,
 } atscmh_sccc_code_mode_t;
 </programlisting>
+		  </para>
 		</section>
 		<section id="DTV-ATSCMH-SCCC-CODE-MODE-B">
 			<title><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></title>
@@ -725,6 +737,9 @@ typedef enum fe_guard_interval {
 	GUARD_INTERVAL_1_128,
 	GUARD_INTERVAL_19_128,
 	GUARD_INTERVAL_19_256,
+	GUARD_INTERVAL_PN420,
+	GUARD_INTERVAL_PN595,
+	GUARD_INTERVAL_PN945,
 } fe_guard_interval_t;
 </programlisting>
 
@@ -733,6 +748,7 @@ typedef enum fe_guard_interval {
 			try to find the correct guard interval (if capable) and will use TMCC to fill
 			in the missing parameters.</para>
 		<para>2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present</para>
+		<para>3) DTMB specifies PN420, PN595 and PN945.</para>
 	</section>
 	<section id="DTV-TRANSMISSION-MODE">
 		<title><constant>DTV_TRANSMISSION_MODE</constant></title>
@@ -749,6 +765,8 @@ typedef enum fe_transmit_mode {
 	TRANSMISSION_MODE_1K,
 	TRANSMISSION_MODE_16K,
 	TRANSMISSION_MODE_32K,
+	TRANSMISSION_MODE_C1,
+	TRANSMISSION_MODE_C3780,
 } fe_transmit_mode_t;
 </programlisting>
 		<para>Notes:</para>
@@ -760,6 +778,7 @@ typedef enum fe_transmit_mode {
 			use TMCC to fill in the missing parameters.</para>
 		<para>3) DVB-T specifies 2K and 8K as valid sizes.</para>
 		<para>4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K.</para>
+		<para>5) DTMB specifies C1 and C3780.</para>
 	</section>
 	<section id="DTV-HIERARCHY">
 	<title><constant>DTV_HIERARCHY</constant></title>
@@ -774,17 +793,28 @@ typedef enum fe_hierarchy {
  } fe_hierarchy_t;
 	</programlisting>
 	</section>
-	<section id="DTV-ISDBS-TS-ID">
-	<title><constant>DTV_ISDBS_TS_ID</constant></title>
-	<para>Currently unused.</para>
+	<section id="DTV-STREAM-ID">
+	<title><constant>DTV_STREAM_ID</constant></title>
+	<para>DVB-S2, DVB-T2 and ISDB-S support the transmission of several
+	      streams on a single transport stream.
+	      This property enables the DVB driver to handle substream filtering,
+	      when supported by the hardware.
+	      By default, substream filtering is disabled.
+	</para><para>
+	      For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
+	</para><para>
+	      For ISDB, the valid substream id range is from 1 to 65535.
+	</para><para>
+	      To disable it, you should use the special macro NO_STREAM_ID_FILTER.
+	</para><para>
+	      Note: any value outside the id range also disables filtering.
+	</para>
 	</section>
-	<section id="DTV-DVBT2-PLP-ID">
-		<title><constant>DTV_DVBT2_PLP_ID</constant></title>
-		<para>DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of
-			many data types via a single multiplex. The API will soon support this
-			at which point this section will be expanded.</para>
+	<section id="DTV-DVBT2-PLP-ID-LEGACY">
+		<title><constant>DTV_DVBT2_PLP_ID_LEGACY</constant></title>
+		<para>Obsolete, replaced with DTV_STREAM_ID.</para>
 	</section>
-	<section id="DTV_ENUM_DELSYS">
+	<section id="DTV-ENUM-DELSYS">
 		<title><constant>DTV_ENUM_DELSYS</constant></title>
 		<para>A Multi standard frontend needs to advertise the delivery systems provided.
 			Applications need to enumerate the provided delivery systems, before using
@@ -796,6 +826,29 @@ typedef enum fe_hierarchy {
 			FE_GET_INFO. In the case of a legacy frontend, the result is just the same
 			as with FE_GET_INFO, but in a more structured format </para>
 	</section>
+	<section id="DTV-INTERLEAVING">
+	<title><constant>DTV_INTERLEAVING</constant></title>
+	<para id="fe-interleaving">Interleaving mode</para>
+	<programlisting>
+enum fe_interleaving {
+	INTERLEAVING_NONE,
+	INTERLEAVING_AUTO,
+	INTERLEAVING_240,
+	INTERLEAVING_720,
+};
+	</programlisting>
+	</section>
+	<section id="DTV-LNA">
+	<title><constant>DTV_LNA</constant></title>
+	<para>Low-noise amplifier.</para>
+	<para>Hardware might offer controllable LNA which can be set manually
+		using that parameter. Usually LNA could be found only from
+		terrestrial devices if at all.</para>
+	<para>Possible values: 0, 1, LNA_AUTO</para>
+	<para>0, LNA off</para>
+	<para>1, LNA on</para>
+	<para>use the special macro LNA_AUTO to set LNA auto</para>
+	</section>
 </section>
 	<section id="frontend-property-terrestrial-systems">
 	<title>Properties used on terrestrial delivery systems</title>
@@ -816,6 +869,7 @@ typedef enum fe_hierarchy {
 				<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 			</itemizedlist>
 		</section>
 		<section id="dvbt2-params">
@@ -838,7 +892,8 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-HIERARCHY"><constant>DTV_HIERARCHY</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-DVBT2-PLP-ID"><constant>DTV_DVBT2_PLP_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
 		</section>
 		<section id="isdbt">
@@ -925,13 +980,32 @@ typedef enum fe_hierarchy {
 				<listitem><para><link linkend="DTV-ATSCMH-PRC"><constant>DTV_ATSCMH_PRC</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-MODE"><constant>DTV_ATSCMH_RS_FRAME_MODE</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-ATSCMH-RS-FRAME-ENSEMBLE"><constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant></link></para></listitem>
-				<listitem><para><link linkend="DTV-ATSCMH-CODE-MODE-PRI"><constant>DTV_ATSCMH_CODE_MODE_PRI</constant></link></para></listitem>
-				<listitem><para><link linkend="DTV-ATSCMH-CODE-MODE-SEC"><constant>DTV_ATSCMH_CODE_MODE_SEC</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-RS-CODE-MODE-PRI"><constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-RS-CODE-MODE-SEC"><constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant></link></para></listitem>
 				<listitem><para><link linkend="DTV-ATSCMH-SCCC-BLOCK-MODE"><constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant></link></para></listitem>
-				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-A"><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></link></para></listitem>
-				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-B"><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></link></para></listitem>
-				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem>
-				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE_MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-A"><constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-B"><constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-C"><constant>DTV_ATSCMH_SCCC_CODE_MODE_C</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-ATSCMH-SCCC-CODE-MODE-D"><constant>DTV_ATSCMH_SCCC_CODE_MODE_D</constant></link></para></listitem>
+			</itemizedlist>
+		</section>
+		<section id="dtmb-params">
+			<title>DTMB delivery system</title>
+			<para>The following parameters are valid for DTMB:</para>
+			<itemizedlist mark='opencircle'>
+				<listitem><para><link linkend="DTV-API-VERSION"><constant>DTV_API_VERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-DELIVERY-SYSTEM"><constant>DTV_DELIVERY_SYSTEM</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TUNE"><constant>DTV_TUNE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-CLEAR"><constant>DTV_CLEAR</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-BANDWIDTH-HZ"><constant>DTV_BANDWIDTH_HZ</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-GUARD-INTERVAL"><constant>DTV_GUARD_INTERVAL</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-TRANSMISSION-MODE"><constant>DTV_TRANSMISSION_MODE</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-INTERLEAVING"><constant>DTV_INTERLEAVING</constant></link></para></listitem>
+				<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 			</itemizedlist>
 		</section>
 	</section>
@@ -952,6 +1026,7 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="dvbc-annex-b-params">
@@ -966,6 +1041,7 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-FREQUENCY"><constant>DTV_FREQUENCY</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INVERSION"><constant>DTV_INVERSION</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-LNA"><constant>DTV_LNA</constant></link></para></listitem>
 		</itemizedlist>
 	</section>
 	</section>
@@ -999,6 +1075,7 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-MODULATION"><constant>DTV_MODULATION</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-PILOT"><constant>DTV_PILOT</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-ROLLOFF"><constant>DTV_ROLLOFF</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
 		</itemizedlist>
 	</section>
 	<section id="turbo-params">
@@ -1021,7 +1098,7 @@ typedef enum fe_hierarchy {
 			<listitem><para><link linkend="DTV-SYMBOL-RATE"><constant>DTV_SYMBOL_RATE</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-INNER-FEC"><constant>DTV_INNER_FEC</constant></link></para></listitem>
 			<listitem><para><link linkend="DTV-VOLTAGE"><constant>DTV_VOLTAGE</constant></link></para></listitem>
-			<listitem><para><link linkend="DTV-ISDBS-TS-ID"><constant>DTV_ISDBS_TS_ID</constant></link></para></listitem>
+			<listitem><para><link linkend="DTV-STREAM-ID"><constant>DTV_STREAM_ID</constant></link></para></listitem>
 		</itemizedlist>
 	</section>
 	</section>

Documentation/DocBook/media/dvb/frontend.xml

@@ -66,7 +66,7 @@ supported via the new <link linkend="FE_GET_SET_PROPERTY">FE_GET_PROPERTY/FE_GET
 
 <para>The usage of this field is deprecated, as it doesn't report all supported standards, and
 will provide an incomplete information for frontends that support multiple delivery systems.
-Please use <link linkend="DTV_ENUM_DELSYS">DTV_ENUM_DELSYS</link> instead.</para>
+Please use <link linkend="DTV-ENUM-DELSYS">DTV_ENUM_DELSYS</link> instead.</para>
 </section>
 
 <section id="fe-caps-t">
@@ -101,6 +101,7 @@ a specific frontend type.</para>
 	FE_CAN_8VSB                   = 0x200000,
 	FE_CAN_16VSB                  = 0x400000,
 	FE_HAS_EXTENDED_CAPS          = 0x800000,
+	FE_CAN_MULTISTREAM            = 0x4000000,
 	FE_CAN_TURBO_FEC              = 0x8000000,
 	FE_CAN_2G_MODULATION          = 0x10000000,
 	FE_NEEDS_BENDING              = 0x20000000,
@@ -207,18 +208,44 @@ spec.</para>
 <para>Several functions of the frontend device use the fe_status data type defined
 by</para>
 <programlisting>
- typedef enum fe_status {
-	 FE_HAS_SIGNAL     = 0x01,   /&#x22C6;  found something above the noise level &#x22C6;/
-	 FE_HAS_CARRIER    = 0x02,   /&#x22C6;  found a DVB signal  &#x22C6;/
-	 FE_HAS_VITERBI    = 0x04,   /&#x22C6;  FEC is stable  &#x22C6;/
-	 FE_HAS_SYNC       = 0x08,   /&#x22C6;  found sync bytes  &#x22C6;/
-	 FE_HAS_LOCK       = 0x10,   /&#x22C6;  everything's working... &#x22C6;/
-	 FE_TIMEDOUT       = 0x20,   /&#x22C6;  no lock within the last ~2 seconds &#x22C6;/
-	 FE_REINIT         = 0x40    /&#x22C6;  frontend was reinitialized,  &#x22C6;/
- } fe_status_t;                      /&#x22C6;  application is recommned to reset &#x22C6;/
+typedef enum fe_status {
+	FE_HAS_SIGNAL		= 0x01,
+	FE_HAS_CARRIER		= 0x02,
+	FE_HAS_VITERBI		= 0x04,
+	FE_HAS_SYNC		= 0x08,
+	FE_HAS_LOCK		= 0x10,
+	FE_TIMEDOUT		= 0x20,
+	FE_REINIT		= 0x40,
+} fe_status_t;
 </programlisting>
-<para>to indicate the current state and/or state changes of the frontend hardware.
-</para>
+<para>to indicate the current state and/or state changes of the frontend hardware:
+</para>
+
+<informaltable><tgroup cols="2"><tbody>
+<row>
+<entry align="char">FE_HAS_SIGNAL</entry>
+<entry align="char">The frontend has found something above the noise level</entry>
+</row><row>
+<entry align="char">FE_HAS_CARRIER</entry>
+<entry align="char">The frontend has found a DVB signal</entry>
+</row><row>
+<entry align="char">FE_HAS_VITERBI</entry>
+<entry align="char">The frontend FEC code is stable</entry>
+</row><row>
+<entry align="char">FE_HAS_SYNC</entry>
+<entry align="char">Syncronization bytes was found</entry>
+</row><row>
+<entry align="char">FE_HAS_LOCK</entry>
+<entry align="char">The DVB were locked and everything is working</entry>
+</row><row>
+<entry align="char">FE_TIMEDOUT</entry>
+<entry align="char">no lock within the last about 2 seconds</entry>
+</row><row>
+<entry align="char">FE_REINIT</entry>
+<entry align="char">The frontend was reinitialized, application is
+recommended to reset DiSEqC, tone and parameters</entry>
+</row>
+</tbody></tgroup></informaltable>
 
 </section>
 
@@ -238,7 +265,7 @@ and to add newer delivery systems.</para>
 <constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant></link> instead, in
 order to be able to support the newer System Delivery like  DVB-S2, DVB-T2,
 DVB-C2, ISDB, etc.</para>
-<para>All kinds of parameters are combined as an union in the FrontendParameters structure:</para>
+<para>All kinds of parameters are combined as an union in the FrontendParameters structure:
 <programlisting>
 struct dvb_frontend_parameters {
 	uint32_t frequency;     /&#x22C6; (absolute) frequency in Hz for QAM/OFDM &#x22C6;/
@@ -251,12 +278,13 @@ struct dvb_frontend_parameters {
 		struct dvb_vsb_parameters  vsb;
 	} u;
 };
-</programlisting>
+</programlisting></para>
 <para>In the case of QPSK frontends the <constant>frequency</constant> field specifies the intermediate
 frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of
 the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and
 OFDM frontends the <constant>frequency</constant> specifies the absolute frequency and is given in Hz.
 </para>
+
 <section id="dvb-qpsk-parameters">
 <title>QPSK parameters</title>
 <para>For satellite QPSK frontends you have to use the <constant>dvb_qpsk_parameters</constant> structure:</para>
@@ -321,8 +349,8 @@ itself.
 <section id="fe-code-rate-t">
 <title>frontend code rate</title>
 <para>The possible values for the <constant>fec_inner</constant> field used on
-<link refend="dvb-qpsk-parameters"><constant>struct dvb_qpsk_parameters</constant></link> and
-<link refend="dvb-qam-parameters"><constant>struct dvb_qam_parameters</constant></link> are:
+<link linkend="dvb-qpsk-parameters"><constant>struct dvb_qpsk_parameters</constant></link> and
+<link linkend="dvb-qam-parameters"><constant>struct dvb_qam_parameters</constant></link> are:
 </para>
 <programlisting>
 typedef enum fe_code_rate {
@@ -347,9 +375,9 @@ detection.
 <section id="fe-modulation-t">
 <title>frontend modulation type for QAM, OFDM and VSB</title>
 <para>For cable and terrestrial frontends, e. g. for
-<link refend="dvb-qam-parameters"><constant>struct dvb_qpsk_parameters</constant></link>,
-<link refend="dvb-ofdm-parameters"><constant>struct dvb_qam_parameters</constant></link> and
-<link refend="dvb-vsb-parameters"><constant>struct dvb_qam_parameters</constant></link>,
+<link linkend="dvb-qam-parameters"><constant>struct dvb_qpsk_parameters</constant></link>,
+<link linkend="dvb-ofdm-parameters"><constant>struct dvb_qam_parameters</constant></link> and
+<link linkend="dvb-vsb-parameters"><constant>struct dvb_qam_parameters</constant></link>,
 it needs to specify the quadrature modulation mode which can be one of the following:
 </para>
 <programlisting>
@@ -370,8 +398,8 @@ it needs to specify the quadrature modulation mode which can be one of the follo
  } fe_modulation_t;
 </programlisting>
 </section>
-<para>Finally, there are several more parameters for OFDM:
-</para>
+<section>
+<title>More OFDM parameters</title>
 <section id="fe-transmit-mode-t">
 <title>Number of carriers per channel</title>
 <programlisting>
@@ -427,6 +455,7 @@ typedef enum fe_hierarchy {
  } fe_hierarchy_t;
 </programlisting>
 </section>
+</section>
 
 </section>
 

Documentation/DocBook/media/dvb/intro.xml

@@ -205,7 +205,7 @@ a partial path like:</para>
 additional include file <emphasis
 role="tt">linux/dvb/version.h</emphasis> exists, which defines the
 constant <emphasis role="tt">DVB_API_VERSION</emphasis>. This document
-describes <emphasis role="tt">DVB_API_VERSION 5.4</emphasis>.
+describes <emphasis role="tt">DVB_API_VERSION 5.8</emphasis>.
 </para>
 
 </section>

Documentation/DocBook/media/dvb/kdapi.xml

@@ -2,7 +2,7 @@
 <para>The kernel demux API defines a driver-internal interface for registering low-level,
 hardware specific driver to a hardware independent demux layer. It is only of interest for
 DVB device driver writers. The header file for this API is named <emphasis role="tt">demux.h</emphasis> and located in
-<emphasis role="tt">drivers/media/dvb/dvb-core</emphasis>.
+<emphasis role="tt">drivers/media/dvb-core</emphasis>.
 </para>
 <para>Maintainer note: This section must be reviewed. It is probably out of date.
 </para>

Documentation/DocBook/media/dvb/net.xml

@@ -26,4 +26,131 @@ struct dvb_net_if {
 <title>DVB net Function Calls</title>
 <para>To be written&#x2026;
 </para>
+
+<section id="NET_ADD_IF"
+role="subsection"><title>NET_ADD_IF</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = NET_ADD_IF,
+ struct dvb_net_if *if);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals NET_ADD_IF for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dvb_net_if *if
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="NET_REMOVE_IF"
+role="subsection"><title>NET_REMOVE_IF</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = NET_REMOVE_IF);
+</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals NET_REMOVE_IF for this command.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
+
+<section id="NET_GET_IF"
+role="subsection"><title>NET_GET_IF</title>
+<para>DESCRIPTION
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>This ioctl is undocumented. Documentation is welcome.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>SYNOPSIS
+</para>
+<informaltable><tgroup cols="1"><tbody><row><entry
+ align="char">
+<para>int ioctl(fd, int request = NET_GET_IF,
+ struct dvb_net_if *if);</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+<para>PARAMETERS
+</para>
+<informaltable><tgroup cols="2"><tbody><row><entry
+ align="char">
+<para>int fd</para>
+</entry><entry
+ align="char">
+<para>File descriptor returned by a previous call to open().</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>int request</para>
+</entry><entry
+ align="char">
+<para>Equals NET_GET_IF for this command.</para>
+</entry>
+ </row><row><entry
+ align="char">
+<para>struct dvb_net_if *if
+</para>
+</entry><entry
+ align="char">
+<para>Undocumented.</para>
+</entry>
+ </row></tbody></tgroup></informaltable>
+&return-value-dvb;
+</section>
 </section>

Documentation/DocBook/media/v4l/biblio.xml

@@ -178,23 +178,23 @@ Signal - NTSC for Studio Applications"</title>
 1125-Line High-Definition Production"</title>
     </biblioentry>
 
-    <biblioentry id="en50067">
-      <abbrev>EN&nbsp;50067</abbrev>
+    <biblioentry id="iec62106">
+      <abbrev>IEC&nbsp;62106</abbrev>
       <authorgroup>
-	<corpauthor>European Committee for Electrotechnical Standardization
-(<ulink url="http://www.cenelec.eu">http://www.cenelec.eu</ulink>)</corpauthor>
+	<corpauthor>International Electrotechnical Commission
+(<ulink url="http://www.iec.ch">http://www.iec.ch</ulink>)</corpauthor>
       </authorgroup>
       <title>Specification of the radio data system (RDS) for VHF/FM sound broadcasting
 in the frequency range from 87,5 to 108,0 MHz</title>
     </biblioentry>
 
     <biblioentry id="nrsc4">
-      <abbrev>NRSC-4</abbrev>
+      <abbrev>NRSC-4-B</abbrev>
       <authorgroup>
 	<corpauthor>National Radio Systems Committee
 (<ulink url="http://www.nrscstandards.org">http://www.nrscstandards.org</ulink>)</corpauthor>
       </authorgroup>
-      <title>NRSC-4: United States RBDS Standard</title>
+      <title>NRSC-4-B: United States RBDS Standard</title>
     </biblioentry>
 
     <biblioentry id="iso12232">
@@ -226,4 +226,44 @@ in the frequency range from 87,5 to 108,0 MHz</title>
       <title>VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT)</title>
     </biblioentry>
 
+    <biblioentry id="vesaedid">
+      <abbrev>EDID</abbrev>
+      <authorgroup>
+	<corpauthor>Video Electronics Standards Association
+(<ulink url="http://www.vesa.org">http://www.vesa.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>VESA Enhanced Extended Display Identification Data Standard</title>
+      <subtitle>Release A, Revision 2</subtitle>
+    </biblioentry>
+
+    <biblioentry id="hdcp">
+      <abbrev>HDCP</abbrev>
+      <authorgroup>
+	<corpauthor>Digital Content Protection LLC
+(<ulink url="http://www.digital-cp.com">http://www.digital-cp.com</ulink>)</corpauthor>
+      </authorgroup>
+      <title>High-bandwidth Digital Content Protection System</title>
+      <subtitle>Revision 1.3</subtitle>
+    </biblioentry>
+
+    <biblioentry id="hdmi">
+      <abbrev>HDMI</abbrev>
+      <authorgroup>
+	<corpauthor>HDMI Licensing LLC
+(<ulink url="http://www.hdmi.org">http://www.hdmi.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>High-Definition Multimedia Interface</title>
+      <subtitle>Specification Version 1.4a</subtitle>
+    </biblioentry>
+
+    <biblioentry id="dp">
+      <abbrev>DP</abbrev>
+      <authorgroup>
+	<corpauthor>Video Electronics Standards Association
+(<ulink url="http://www.vesa.org">http://www.vesa.org</ulink>)</corpauthor>
+      </authorgroup>
+      <title>VESA DisplayPort Standard</title>
+      <subtitle>Version 1, Revision 2</subtitle>
+    </biblioentry>
+
   </bibliography>

Documentation/DocBook/media/v4l/common.xml

@@ -564,7 +564,7 @@ automatically.</para>
     <para>To query and select the standard used by the current video
 input or output applications call the &VIDIOC-G-STD; and
 &VIDIOC-S-STD; ioctl, respectively. The <emphasis>received</emphasis>
-standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), <emphasis>not</emphasis> an index into the standard enumeration.<footnote>
+standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note that the parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), <emphasis>not</emphasis> an index into the standard enumeration.<footnote>
 	<para>An alternative to the current scheme is to use pointers
 to indices as arguments of <constant>VIDIOC_G_STD</constant> and
 <constant>VIDIOC_S_STD</constant>, the &v4l2-input; and
@@ -588,30 +588,28 @@ switch to a standard by &v4l2-std-id;.</para>
       </footnote> Drivers must implement all video standard ioctls
 when the device has one or more video inputs or outputs.</para>
 
-    <para>Special rules apply to USB cameras where the notion of video
-standards makes little sense. More generally any capture device,
-output devices accordingly, which is <itemizedlist>
+    <para>Special rules apply to devices such as USB cameras where the notion of video
+standards makes little sense. More generally for any capture or output device
+which is: <itemizedlist>
 	<listitem>
 	  <para>incapable of capturing fields or frames at the nominal
 rate of the video standard, or</para>
 	</listitem>
 	<listitem>
-	  <para>where <link linkend="buffer">timestamps</link> refer
-to the instant the field or frame was received by the driver, not the
-capture time, or</para>
-	</listitem>
-	<listitem>
-	  <para>where <link linkend="buffer">sequence numbers</link>
-refer to the frames received by the driver, not the captured
-frames.</para>
+	  <para>that does not support the video standard formats at all.</para>
 	</listitem>
       </itemizedlist> Here the driver shall set the
 <structfield>std</structfield> field of &v4l2-input; and &v4l2-output;
-to zero, the <constant>VIDIOC_G_STD</constant>,
+to zero and the <constant>VIDIOC_G_STD</constant>,
 <constant>VIDIOC_S_STD</constant>,
 <constant>VIDIOC_QUERYSTD</constant> and
 <constant>VIDIOC_ENUMSTD</constant> ioctls shall return the
-&EINVAL;.<footnote>
+&ENOTTY;.<footnote>
+	<para>See <xref linkend="buffer" /> for a rationale.</para>
+	<para>Applications can make use of the <xref linkend="input-capabilities" /> and
+<xref linkend="output-capabilities"/> flags to determine whether the video standard ioctls
+are available for the device.</para>
+&ENOTTY;.
 	<para>See <xref linkend="buffer" /> for a rationale. Probably
 even USB cameras follow some well known video standard. It might have
 been better to explicitly indicate elsewhere if a device cannot live
@@ -626,9 +624,9 @@ up to normal expectations, instead of this exception.</para>
 &v4l2-standard; standard;
 
 if (-1 == ioctl (fd, &VIDIOC-G-STD;, &amp;std_id)) {
-	/* Note when VIDIOC_ENUMSTD always returns EINVAL this
+	/* Note when VIDIOC_ENUMSTD always returns ENOTTY this
 	   is no video device or it falls under the USB exception,
-	   and VIDIOC_G_STD returning EINVAL is no error. */
+	   and VIDIOC_G_STD returning ENOTTY is no error. */
 
 	perror ("VIDIOC_G_STD");
 	exit (EXIT_FAILURE);

Documentation/DocBook/media/v4l/compat.xml

@@ -1476,7 +1476,7 @@ follows.<informaltable>
 		  </row>
 		  <row>
 		    <entry><constant>V4L2_BUF_TYPE_PRIVATE_BASE</constant></entry>
-		    <entry><constant>V4L2_BUF_TYPE_PRIVATE</constant></entry>
+		    <entry><constant>V4L2_BUF_TYPE_PRIVATE</constant> (but this is deprecated)</entry>
 		  </row>
 		</tbody>
 	      </tgroup>
@@ -2468,21 +2468,9 @@ that used it. It was originally scheduled for removal in 2.6.35.
 	  <structfield>reserved2</structfield> and removed
 	  <constant>V4L2_BUF_FLAG_INPUT</constant>.</para>
 	</listitem>
-      </orderedlist>
-    </section>
-
-    <section>
-      <title>V4L2 in Linux 3.6</title>
-      <orderedlist>
         <listitem>
 	  <para>Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capabilities.</para>
         </listitem>
-      </orderedlist>
-    </section>
-
-    <section>
-      <title>V4L2 in Linux 3.6</title>
-      <orderedlist>
         <listitem>
 	  <para>Added support for frequency band enumerations: &VIDIOC-ENUM-FREQ-BANDS;.</para>
         </listitem>
@@ -2567,29 +2555,6 @@ and may change in the future.</para>
 	  <para>Video Output Overlay (OSD) Interface, <xref
 	    linkend="osd" />.</para>
         </listitem>
-	<listitem>
-	  <para><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant>,
-	&v4l2-buf-type;, <xref linkend="v4l2-buf-type" />.</para>
-        </listitem>
-        <listitem>
-	  <para><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant>,
-&VIDIOC-QUERYCAP; ioctl, <xref linkend="device-capabilities" />.</para>
-        </listitem>
-        <listitem>
-	  <para>&VIDIOC-ENUM-FRAMESIZES; and
-&VIDIOC-ENUM-FRAMEINTERVALS; ioctls.</para>
-        </listitem>
-        <listitem>
-	  <para>&VIDIOC-G-ENC-INDEX; ioctl.</para>
-        </listitem>
-        <listitem>
-	  <para>&VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD;
-ioctls.</para>
-        </listitem>
-        <listitem>
-	  <para>&VIDIOC-DECODER-CMD; and &VIDIOC-TRY-DECODER-CMD;
-ioctls.</para>
-        </listitem>
         <listitem>
 	  <para>&VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER;
 ioctls.</para>
@@ -2614,10 +2579,6 @@ ioctls.</para>
 	  <para>Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION;
 	  and &VIDIOC-SUBDEV-S-SELECTION; ioctls.</para>
         </listitem>
-        <listitem>
-	  <para><link linkend="v4l2-auto-focus-area"><constant>
-	  V4L2_CID_AUTO_FOCUS_AREA</constant></link> control.</para>
-        </listitem>
         <listitem>
 	  <para>Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl.</para>
         </listitem>

Documentation/DocBook/media/v4l/dev-osd.xml

   <title>Video Output Overlay Interface</title>
   <subtitle>Also known as On-Screen Display (OSD)</subtitle>
 
-  <note>
-    <title>Experimental</title>
-
-    <para>This is an <link linkend="experimental">experimental</link>
-interface and may change in the future.</para>
-  </note>
-
   <para>Some video output devices can overlay a framebuffer image onto
 the outgoing video signal. Applications can set up such an overlay
 using this interface, which borrows structures and ioctls of the <link

Documentation/DocBook/media/v4l/dev-rds.xml

@@ -6,7 +6,7 @@ information, on an inaudible audio subcarrier of a radio program. This
 interface is aimed at devices capable of receiving and/or transmitting RDS
 information.</para>
 
-      <para>For more information see the core RDS standard <xref linkend="en50067" />
+      <para>For more information see the core RDS standard <xref linkend="iec62106" />
 and the RBDS standard <xref linkend="nrsc4" />.</para>
 
       <para>Note that the RBDS standard as is used in the USA is almost identical

Documentation/DocBook/media/v4l/dev-subdev.xml

@@ -374,29 +374,29 @@
       rectangle --- if it is supported by the hardware.</para>
 
       <orderedlist>
-	<listitem>Sink pad format. The user configures the sink pad
+	<listitem><para>Sink pad format. The user configures the sink pad
 	format. This format defines the parameters of the image the
-	entity receives through the pad for further processing.</listitem>
+	entity receives through the pad for further processing.</para></listitem>
 
-	<listitem>Sink pad actual crop selection. The sink pad crop
-	defines the crop performed to the sink pad format.</listitem>
+	<listitem><para>Sink pad actual crop selection. The sink pad crop
+	defines the crop performed to the sink pad format.</para></listitem>
 
-	<listitem>Sink pad actual compose selection. The size of the
+	<listitem><para>Sink pad actual compose selection. The size of the
 	sink pad compose rectangle defines the scaling ratio compared
 	to the size of the sink pad crop rectangle. The location of
 	the compose rectangle specifies the location of the actual
 	sink compose rectangle in the sink compose bounds
-	rectangle.</listitem>
+	rectangle.</para></listitem>
 
-	<listitem>Source pad actual crop selection. Crop on the source
+	<listitem><para>Source pad actual crop selection. Crop on the source
 	pad defines crop performed to the image in the sink compose
-	bounds rectangle.</listitem>
+	bounds rectangle.</para></listitem>
 
-	<listitem>Source pad format. The source pad format defines the
+	<listitem><para>Source pad format. The source pad format defines the
 	output pixel format of the subdev, as well as the other
 	parameters with the exception of the image width and height.
 	Width and height are defined by the size of the source pad
-	actual crop selection.</listitem>
+	actual crop selection.</para></listitem>
       </orderedlist>
 
       <para>Accessing any of the above rectangles not supported by the

Documentation/DocBook/media/v4l/gen-errors.xml

@@ -6,6 +6,15 @@
     &cs-str;
     <tbody valign="top">
 	<!-- Keep it ordered alphabetically -->
+      <row>
+	<entry>EAGAIN (aka EWOULDBLOCK)</entry>
+	<entry>The ioctl can't be handled because the device is in state where
+	       it can't perform it. This could happen for example in case where
+	       device is sleeping and ioctl is performed to query statistics.
+	       It is also returned when the ioctl would need to wait
+	       for an event, but the device was opened in non-blocking mode.
+	</entry>
+      </row>
       <row>
 	<entry>EBADF</entry>
 	<entry>The file descriptor is not a valid.</entry>
@@ -50,22 +59,12 @@
 	       that this request would overcommit the usb bandwidth reserved
 	       for periodic transfers (up to 80% of the USB bandwidth).</entry>
       </row>
-      <row>
-	<entry>ENOSYS or EOPNOTSUPP</entry>
-	<entry>Function not available for this device (dvb API only. Will likely
-	       be replaced anytime soon by ENOTTY).</entry>
-      </row>
       <row>
 	<entry>EPERM</entry>
 	<entry>Permission denied. Can be returned if the device needs write
 		permission, or some special capabilities is needed
 		(e. g. root)</entry>
       </row>
-      <row>
-	<entry>EWOULDBLOCK</entry>
-	<entry>Operation would block. Used when the ioctl would need to wait
-	       for an event, but the device was opened in non-blocking mode.</entry>
-      </row>
     </tbody>
   </tgroup>
 </table>

Documentation/DocBook/media/v4l/io.xml

@@ -613,8 +613,8 @@ field is independent of the <structfield>timestamp</structfield> and
 	    <entry>__u32</entry>
 	    <entry><structfield>sequence</structfield></entry>
 	    <entry></entry>
-	    <entry>Set by the driver, counting the frames in the
-sequence.</entry>
+	    <entry>Set by the driver, counting the frames (not fields!) in
+sequence. This field is set for both input and output devices.</entry>
 	  </row>
 	  <row>
 	    <entry spanname="hspan"><para>In <link
@@ -685,18 +685,14 @@ memory, set by the application. See <xref linkend="userp" /> for details.
 	    <entry>__u32</entry>
 	    <entry><structfield>reserved2</structfield></entry>
 	    <entry></entry>
-	    <entry>A place holder for future extensions and custom
-(driver defined) buffer types
-<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
+	    <entry>A place holder for future extensions. Applications
 should set this to 0.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>reserved</structfield></entry>
 	    <entry></entry>
-	    <entry>A place holder for future extensions and custom
-(driver defined) buffer types
-<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
+	    <entry>A place holder for future extensions. Applications
 should set this to 0.</entry>
 	  </row>
 	</tbody>
@@ -827,14 +823,7 @@ should set this to 0.</entry>
 	    <entry><constant>V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY</constant></entry>
 	    <entry>8</entry>
 	    <entry>Buffer for video output overlay (OSD), see <xref
-		linkend="osd" />. Status: <link
-linkend="experimental">Experimental</link>.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_TYPE_PRIVATE</constant></entry>
-	    <entry>0x80</entry>
-	  <entry>This and higher values are reserved for custom
-(driver defined) buffer types.</entry>
+		linkend="osd" />.</entry>
 	  </row>
 	</tbody>
       </tgroup>

Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml

@@ -22,8 +22,7 @@
 	with 10 bits per colour compressed to 8 bits each, using DPCM
 	compression. DPCM, differential pulse-code modulation, is lossy.
 	Each colour component consumes 8 bits of memory. In other respects
-	this format is similar to <xref
-	linkend="pixfmt-srggb10">.</xref></para>
+	this format is similar to <xref linkend="pixfmt-srggb10" />.</para>
 
       </refsect1>
     </refentry>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -708,6 +708,7 @@ information.</para>
     &sub-y41p;
     &sub-yuv420;
     &sub-yuv420m;
+    &sub-yvu420m;
     &sub-yuv410;
     &sub-yuv422p;
     &sub-yuv411p;

Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml

@@ -49,13 +49,6 @@
   <refsect1>
     <title>Description</title>
 
-    <note>
-      <title>Experimental</title>
-
-      <para>This is an <link linkend="experimental">experimental</link>
-interface and may change in the future.</para>
-    </note>
-
     <para>These ioctls control an audio/video (usually MPEG-) decoder.
 <constant>VIDIOC_DECODER_CMD</constant> sends a command to the
 decoder, <constant>VIDIOC_TRY_DECODER_CMD</constant> can be used to