提交 9f9c4180 编写于 作者: P Per Forlin 提交者: Chris Ball

mmc: mmc_test: add test for non-blocking transfers

Add four tests for read and write performance per
different transfer size, 4k to 4M.
 * Read using blocking mmc request
 * Read using non-blocking mmc request
 * Write using blocking mmc request
 * Write using non-blocking mmc request

The host driver must support pre_req() and post_req()
in order to run the non-blocking test cases.
Signed-off-by: NPer Forlin <per.forlin@linaro.org>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NVenkatraman S <svenkatr@ti.com>
Tested-by: Sourav Poddar<sourav.poddar@ti.com>
Tested-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NChris Ball <cjb@laptop.org>
上级 54f3caf5
......@@ -148,6 +148,26 @@ struct mmc_test_card {
struct mmc_test_general_result *gr;
};
enum mmc_test_prep_media {
MMC_TEST_PREP_NONE = 0,
MMC_TEST_PREP_WRITE_FULL = 1 << 0,
MMC_TEST_PREP_ERASE = 1 << 1,
};
struct mmc_test_multiple_rw {
unsigned int *bs;
unsigned int len;
unsigned int size;
bool do_write;
bool do_nonblock_req;
enum mmc_test_prep_media prepare;
};
struct mmc_test_async_req {
struct mmc_async_req areq;
struct mmc_test_card *test;
};
/*******************************************************************/
/* General helper functions */
/*******************************************************************/
......@@ -685,6 +705,17 @@ static int mmc_test_check_result(struct mmc_test_card *test,
return ret;
}
static int mmc_test_check_result_async(struct mmc_card *card,
struct mmc_async_req *areq)
{
struct mmc_test_async_req *test_async =
container_of(areq, struct mmc_test_async_req, areq);
mmc_test_wait_busy(test_async->test);
return mmc_test_check_result(test_async->test, areq->mrq);
}
/*
* Checks that a "short transfer" behaved as expected
*/
......@@ -719,6 +750,85 @@ static int mmc_test_check_broken_result(struct mmc_test_card *test,
return ret;
}
/*
* Tests nonblock transfer with certain parameters
*/
static void mmc_test_nonblock_reset(struct mmc_request *mrq,
struct mmc_command *cmd,
struct mmc_command *stop,
struct mmc_data *data)
{
memset(mrq, 0, sizeof(struct mmc_request));
memset(cmd, 0, sizeof(struct mmc_command));
memset(data, 0, sizeof(struct mmc_data));
memset(stop, 0, sizeof(struct mmc_command));
mrq->cmd = cmd;
mrq->data = data;
mrq->stop = stop;
}
static int mmc_test_nonblock_transfer(struct mmc_test_card *test,
struct scatterlist *sg, unsigned sg_len,
unsigned dev_addr, unsigned blocks,
unsigned blksz, int write, int count)
{
struct mmc_request mrq1;
struct mmc_command cmd1;
struct mmc_command stop1;
struct mmc_data data1;
struct mmc_request mrq2;
struct mmc_command cmd2;
struct mmc_command stop2;
struct mmc_data data2;
struct mmc_test_async_req test_areq[2];
struct mmc_async_req *done_areq;
struct mmc_async_req *cur_areq = &test_areq[0].areq;
struct mmc_async_req *other_areq = &test_areq[1].areq;
int i;
int ret;
test_areq[0].test = test;
test_areq[1].test = test;
mmc_test_nonblock_reset(&mrq1, &cmd1, &stop1, &data1);
mmc_test_nonblock_reset(&mrq2, &cmd2, &stop2, &data2);
cur_areq->mrq = &mrq1;
cur_areq->err_check = mmc_test_check_result_async;
other_areq->mrq = &mrq2;
other_areq->err_check = mmc_test_check_result_async;
for (i = 0; i < count; i++) {
mmc_test_prepare_mrq(test, cur_areq->mrq, sg, sg_len, dev_addr,
blocks, blksz, write);
done_areq = mmc_start_req(test->card->host, cur_areq, &ret);
if (ret || (!done_areq && i > 0))
goto err;
if (done_areq) {
if (done_areq->mrq == &mrq2)
mmc_test_nonblock_reset(&mrq2, &cmd2,
&stop2, &data2);
else
mmc_test_nonblock_reset(&mrq1, &cmd1,
&stop1, &data1);
}
done_areq = cur_areq;
cur_areq = other_areq;
other_areq = done_areq;
dev_addr += blocks;
}
done_areq = mmc_start_req(test->card->host, NULL, &ret);
return ret;
err:
return ret;
}
/*
* Tests a basic transfer with certain parameters
*/
......@@ -1336,14 +1446,17 @@ static int mmc_test_area_transfer(struct mmc_test_card *test,
}
/*
* Map and transfer bytes.
* Map and transfer bytes for multiple transfers.
*/
static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
unsigned int dev_addr, int write, int max_scatter,
int timed)
static int mmc_test_area_io_seq(struct mmc_test_card *test, unsigned long sz,
unsigned int dev_addr, int write,
int max_scatter, int timed, int count,
bool nonblock)
{
struct timespec ts1, ts2;
int ret;
int ret = 0;
int i;
struct mmc_test_area *t = &test->area;
/*
* In the case of a maximally scattered transfer, the maximum transfer
......@@ -1367,8 +1480,15 @@ static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
if (timed)
getnstimeofday(&ts1);
if (nonblock)
ret = mmc_test_nonblock_transfer(test, t->sg, t->sg_len,
dev_addr, t->blocks, 512, write, count);
else
for (i = 0; i < count && ret == 0; i++) {
ret = mmc_test_area_transfer(test, dev_addr, write);
dev_addr += sz >> 9;
}
if (ret)
return ret;
......@@ -1376,11 +1496,19 @@ static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
getnstimeofday(&ts2);
if (timed)
mmc_test_print_rate(test, sz, &ts1, &ts2);
mmc_test_print_avg_rate(test, sz, count, &ts1, &ts2);
return 0;
}
static int mmc_test_area_io(struct mmc_test_card *test, unsigned long sz,
unsigned int dev_addr, int write, int max_scatter,
int timed)
{
return mmc_test_area_io_seq(test, sz, dev_addr, write, max_scatter,
timed, 1, false);
}
/*
* Write the test area entirely.
*/
......@@ -1954,6 +2082,153 @@ static int mmc_test_large_seq_write_perf(struct mmc_test_card *test)
return mmc_test_large_seq_perf(test, 1);
}
static int mmc_test_rw_multiple(struct mmc_test_card *test,
struct mmc_test_multiple_rw *tdata,
unsigned int reqsize, unsigned int size)
{
unsigned int dev_addr;
struct mmc_test_area *t = &test->area;
int ret = 0;
/* Set up test area */
if (size > mmc_test_capacity(test->card) / 2 * 512)
size = mmc_test_capacity(test->card) / 2 * 512;
if (reqsize > t->max_tfr)
reqsize = t->max_tfr;
dev_addr = mmc_test_capacity(test->card) / 4;
if ((dev_addr & 0xffff0000))
dev_addr &= 0xffff0000; /* Round to 64MiB boundary */
else
dev_addr &= 0xfffff800; /* Round to 1MiB boundary */
if (!dev_addr)
goto err;
if (reqsize > size)
return 0;
/* prepare test area */
if (mmc_can_erase(test->card) &&
tdata->prepare & MMC_TEST_PREP_ERASE) {
ret = mmc_erase(test->card, dev_addr,
size / 512, MMC_SECURE_ERASE_ARG);
if (ret)
ret = mmc_erase(test->card, dev_addr,
size / 512, MMC_ERASE_ARG);
if (ret)
goto err;
}
/* Run test */
ret = mmc_test_area_io_seq(test, reqsize, dev_addr,
tdata->do_write, 0, 1, size / reqsize,
tdata->do_nonblock_req);
if (ret)
goto err;
return ret;
err:
printk(KERN_INFO "[%s] error\n", __func__);
return ret;
}
static int mmc_test_rw_multiple_size(struct mmc_test_card *test,
struct mmc_test_multiple_rw *rw)
{
int ret = 0;
int i;
void *pre_req = test->card->host->ops->pre_req;
void *post_req = test->card->host->ops->post_req;
if (rw->do_nonblock_req &&
((!pre_req && post_req) || (pre_req && !post_req))) {
printk(KERN_INFO "error: only one of pre/post is defined\n");
return -EINVAL;
}
for (i = 0 ; i < rw->len && ret == 0; i++) {
ret = mmc_test_rw_multiple(test, rw, rw->bs[i], rw->size);
if (ret)
break;
}
return ret;
}
/*
* Multiple blocking write 4k to 4 MB chunks
*/
static int mmc_test_profile_mult_write_blocking_perf(struct mmc_test_card *test)
{
unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
struct mmc_test_multiple_rw test_data = {
.bs = bs,
.size = TEST_AREA_MAX_SIZE,
.len = ARRAY_SIZE(bs),
.do_write = true,
.do_nonblock_req = false,
.prepare = MMC_TEST_PREP_ERASE,
};
return mmc_test_rw_multiple_size(test, &test_data);
};
/*
* Multiple non-blocking write 4k to 4 MB chunks
*/
static int mmc_test_profile_mult_write_nonblock_perf(struct mmc_test_card *test)
{
unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
struct mmc_test_multiple_rw test_data = {
.bs = bs,
.size = TEST_AREA_MAX_SIZE,
.len = ARRAY_SIZE(bs),
.do_write = true,
.do_nonblock_req = true,
.prepare = MMC_TEST_PREP_ERASE,
};
return mmc_test_rw_multiple_size(test, &test_data);
}
/*
* Multiple blocking read 4k to 4 MB chunks
*/
static int mmc_test_profile_mult_read_blocking_perf(struct mmc_test_card *test)
{
unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
struct mmc_test_multiple_rw test_data = {
.bs = bs,
.size = TEST_AREA_MAX_SIZE,
.len = ARRAY_SIZE(bs),
.do_write = false,
.do_nonblock_req = false,
.prepare = MMC_TEST_PREP_NONE,
};
return mmc_test_rw_multiple_size(test, &test_data);
}
/*
* Multiple non-blocking read 4k to 4 MB chunks
*/
static int mmc_test_profile_mult_read_nonblock_perf(struct mmc_test_card *test)
{
unsigned int bs[] = {1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16,
1 << 17, 1 << 18, 1 << 19, 1 << 20, 1 << 22};
struct mmc_test_multiple_rw test_data = {
.bs = bs,
.size = TEST_AREA_MAX_SIZE,
.len = ARRAY_SIZE(bs),
.do_write = false,
.do_nonblock_req = true,
.prepare = MMC_TEST_PREP_NONE,
};
return mmc_test_rw_multiple_size(test, &test_data);
}
static const struct mmc_test_case mmc_test_cases[] = {
{
.name = "Basic write (no data verification)",
......@@ -2221,6 +2496,33 @@ static const struct mmc_test_case mmc_test_cases[] = {
.cleanup = mmc_test_area_cleanup,
},
{
.name = "Write performance with blocking req 4k to 4MB",
.prepare = mmc_test_area_prepare,
.run = mmc_test_profile_mult_write_blocking_perf,
.cleanup = mmc_test_area_cleanup,
},
{
.name = "Write performance with non-blocking req 4k to 4MB",
.prepare = mmc_test_area_prepare,
.run = mmc_test_profile_mult_write_nonblock_perf,
.cleanup = mmc_test_area_cleanup,
},
{
.name = "Read performance with blocking req 4k to 4MB",
.prepare = mmc_test_area_prepare,
.run = mmc_test_profile_mult_read_blocking_perf,
.cleanup = mmc_test_area_cleanup,
},
{
.name = "Read performance with non-blocking req 4k to 4MB",
.prepare = mmc_test_area_prepare,
.run = mmc_test_profile_mult_read_nonblock_perf,
.cleanup = mmc_test_area_cleanup,
},
};
static DEFINE_MUTEX(mmc_test_lock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册