From 9c72e2ad21eabcc0c54817b37ae4027fd6549a5e Mon Sep 17 00:00:00 2001 From: Denis Carikli Date: Mon, 7 Apr 2014 18:04:00 +0200 Subject: [PATCH] ARM: dts: mbimxsd51 baseboard: Add USB support. Signed-off-by: Denis Carikli Signed-off-by: Shawn Guo --- .../dts/imx51-eukrea-mbimxsd51-baseboard.dts | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 5cec4f322096..8b1098ebaf79 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -57,6 +57,20 @@ fsl,mux-int-port = <2>; fsl,mux-ext-port = <3>; }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + }; }; &audmux { @@ -151,6 +165,29 @@ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 + >; + }; }; }; @@ -173,3 +210,24 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbh1phy>; + dr_mode = "host"; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi_wide"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; +}; -- GitLab