ARM: dts: exynos: Add soc node to exynos4210

Soc nodes are used in other exynos DTS. Exynos4210 boards should use
them as well.
Signed-off-by: NMaciej Purski <m.purski@samsung.com>
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>

arch/arm/boot/dts/exynos4210.dtsi

@@ -60,6 +60,7 @@
 		};
 	};
 
+	soc: soc {
 		sysram: sysram@2020000 {
 			compatible = "mmio-sram";
 			reg = <0x02020000 0x20000>;
@@ -106,7 +107,8 @@
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+				interrupt-map =
+					<0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
 					<1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
 					<2 &combiner 12 6>,
 					<3 &combiner 12 7>,
@@ -152,26 +154,6 @@
 			reg = <0x03860000 0x1000>;
 		};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-			      cpu_alert0: cpu-alert-0 {
-				      temperature = <85000>; /* millicelsius */
-			      };
-			      cpu_alert1: cpu-alert-1 {
-				      temperature = <100000>; /* millicelsius */
-			      };
-			      cpu_alert2: cpu-alert-2 {
-				      temperature = <110000>; /* millicelsius */
-			      };
-			};
-		};
-	};
-
 		g2d: g2d@12800000 {
 			compatible = "samsung,s5pv210-g2d";
 			reg = <0x12800000 0x1000>;
@@ -370,6 +352,27 @@
 				opp-hz = /bits/ 64 <200000000>;
 			};
 		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				cpu_alert0: cpu-alert-0 {
+				temperature = <85000>; /* millicelsius */
+				};
+				cpu_alert1: cpu-alert-1 {
+				temperature = <100000>; /* millicelsius */
+				};
+				cpu_alert2: cpu-alert-2 {
+				temperature = <110000>; /* millicelsius */
+				};
+			};
+		};
+	};
 };
 
 &gic {