From 988199fe34411b413d5a388fc751c91eb4686f36 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 7 May 2005 13:05:52 -0700 Subject: [PATCH] [PATCH] USB: goku_udc updates (sparse, SETUP api change) Sparse updates; and the API change for SETUP packets being in USB byteorder. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/goku_udc.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 005db7cca292..ed773a9111de 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -70,7 +70,7 @@ MODULE_LICENSE("GPL"); * seem to behave quite as expected. Used by default. * * OUT dma documents design problems handling the common "short packet" - * transfer termination policy; it couldn't enabled by default, even + * transfer termination policy; it couldn't be enabled by default, even * if the OUT-dma abort problems had a resolution. */ static unsigned use_dma = 1; @@ -313,7 +313,7 @@ goku_free_request(struct usb_ep *_ep, struct usb_request *_req) #if defined(CONFIG_X86) #define USE_KMALLOC -#elif defined(CONFIG_MIPS) && !defined(CONFIG_NONCOHERENT_IO) +#elif defined(CONFIG_MIPS) && !defined(CONFIG_DMA_NONCOHERENT) #define USE_KMALLOC #elif defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) @@ -1524,9 +1524,12 @@ static void ep0_setup(struct goku_udc *dev) /* read SETUP packet and enter DATA stage */ ctrl.bRequestType = readl(®s->bRequestType); ctrl.bRequest = readl(®s->bRequest); - ctrl.wValue = (readl(®s->wValueH) << 8) | readl(®s->wValueL); - ctrl.wIndex = (readl(®s->wIndexH) << 8) | readl(®s->wIndexL); - ctrl.wLength = (readl(®s->wLengthH) << 8) | readl(®s->wLengthL); + ctrl.wValue = cpu_to_le16((readl(®s->wValueH) << 8) + | readl(®s->wValueL)); + ctrl.wIndex = cpu_to_le16((readl(®s->wIndexH) << 8) + | readl(®s->wIndexL)); + ctrl.wLength = cpu_to_le16((readl(®s->wLengthH) << 8) + | readl(®s->wLengthL)); writel(0, ®s->SetupRecv); nuke(&dev->ep[0], 0); @@ -1548,18 +1551,20 @@ static void ep0_setup(struct goku_udc *dev) case USB_REQ_CLEAR_FEATURE: switch (ctrl.bRequestType) { case USB_RECIP_ENDPOINT: - tmp = ctrl.wIndex & 0x0f; + tmp = le16_to_cpu(ctrl.wIndex) & 0x0f; /* active endpoint */ if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0)) goto stall; - if (ctrl.wIndex & USB_DIR_IN) { + if (ctrl.wIndex & __constant_cpu_to_le16( + USB_DIR_IN)) { if (!dev->ep[tmp].is_in) goto stall; } else { if (dev->ep[tmp].is_in) goto stall; } - if (ctrl.wValue != USB_ENDPOINT_HALT) + if (ctrl.wValue != __constant_cpu_to_le16( + USB_ENDPOINT_HALT)) goto stall; if (tmp) goku_clear_halt(&dev->ep[tmp]); @@ -1571,7 +1576,7 @@ static void ep0_setup(struct goku_udc *dev) return; case USB_RECIP_DEVICE: /* device remote wakeup: always clear */ - if (ctrl.wValue != 1) + if (ctrl.wValue != __constant_cpu_to_le16(1)) goto stall; VDBG(dev, "clear dev remote wakeup\n"); goto succeed; @@ -1589,14 +1594,15 @@ static void ep0_setup(struct goku_udc *dev) #ifdef USB_TRACE VDBG(dev, "SETUP %02x.%02x v%04x i%04x l%04x\n", ctrl.bRequestType, ctrl.bRequest, - ctrl.wValue, ctrl.wIndex, ctrl.wLength); + le16_to_cpu(ctrl.wValue), le16_to_cpu(ctrl.wIndex), + le16_to_cpu(ctrl.wLength)); #endif /* hw wants to know when we're configured (or not) */ dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION && ctrl.bRequestType == USB_RECIP_DEVICE); if (unlikely(dev->req_config)) - dev->configured = (ctrl.wValue != 0); + dev->configured = (ctrl.wValue != __constant_cpu_to_le16(0)); /* delegate everything to the gadget driver. * it may respond after this irq handler returns. -- GitLab