diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec new file mode 100644 index 0000000000000000000000000000000000000000..297b9720f024129d50683b0c515cee58672e1d00 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -0,0 +1,18 @@ +What: /sys/bus/iio/devices/iio:deviceX/calibrate +Date: July 2015 +KernelVersion: 4.7 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' will perform a FOC (Fast Online Calibration). The + corresponding calibration offsets can be read from *_calibbias + entries. + +What: /sys/bus/iio/devices/iio:deviceX/location +Date: July 2015 +KernelVersion: 4.7 +Contact: linux-iio@vger.kernel.org +Description: + This attribute returns a string with the physical location where + the motion sensor is placed. For example, in a laptop a motion + sensor can be located on the base or on the lid. Current valid + values are 'base' and 'lid'. diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig index 26a6026de6147a90c95da67f54a8cea8ccab86ef..e108996a962714dd804e8aff4322b967ae864e1c 100644 --- a/drivers/iio/common/Kconfig +++ b/drivers/iio/common/Kconfig @@ -2,6 +2,7 @@ # IIO common modules # +source "drivers/iio/common/cros_ec_sensors/Kconfig" source "drivers/iio/common/hid-sensors/Kconfig" source "drivers/iio/common/ms_sensors/Kconfig" source "drivers/iio/common/ssp_sensors/Kconfig" diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile index 585da6a1b18821048dea803b5b66169683c1b255..6fa760e1bdd557d0cea6a545fac4db8a95f180db 100644 --- a/drivers/iio/common/Makefile +++ b/drivers/iio/common/Makefile @@ -7,6 +7,7 @@ # # When adding new entries keep the list in alphabetical order +obj-y += cros_ec_sensors/ obj-y += hid-sensors/ obj-y += ms_sensors/ obj-y += ssp_sensors/ diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..24743be15a5b6ea1a9b993fe9acbee54db68489f --- /dev/null +++ b/drivers/iio/common/cros_ec_sensors/Kconfig @@ -0,0 +1,14 @@ +# +# Chrome OS Embedded Controller managed sensors library +# +config IIO_CROS_EC_SENSORS_CORE + tristate "ChromeOS EC Sensors Core" + depends on SYSFS && MFD_CROS_EC + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Base module for the ChromeOS EC Sensors module. + Contains core functions used by other IIO CrosEC sensor + drivers. + Define common attributes and sysfs interrupt handler. + diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..95b690139bfd6320e07e73b351996f22e9cb0120 --- /dev/null +++ b/drivers/iio/common/cros_ec_sensors/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for sensors seen through the ChromeOS EC sensor hub. +# + +obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c new file mode 100644 index 0000000000000000000000000000000000000000..a3be7991355ef05eff70db6db6cf9dd35ea8495c --- /dev/null +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c @@ -0,0 +1,450 @@ +/* + * cros_ec_sensors_core - Common function for Chrome OS EC sensor driver. + * + * Copyright (C) 2016 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cros_ec_sensors_core.h" + +static char *cros_ec_loc[] = { + [MOTIONSENSE_LOC_BASE] = "base", + [MOTIONSENSE_LOC_LID] = "lid", + [MOTIONSENSE_LOC_MAX] = "unknown", +}; + +int cros_ec_sensors_core_init(struct platform_device *pdev, + struct iio_dev *indio_dev, + bool physical_device) +{ + struct device *dev = &pdev->dev; + struct cros_ec_sensors_core_state *state = iio_priv(indio_dev); + struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent); + struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev); + + platform_set_drvdata(pdev, indio_dev); + + state->ec = ec->ec_dev; + state->msg = devm_kzalloc(&pdev->dev, + max((u16)sizeof(struct ec_params_motion_sense), + state->ec->max_response), GFP_KERNEL); + if (!state->msg) + return -ENOMEM; + + state->resp = (struct ec_response_motion_sense *)state->msg->data; + + mutex_init(&state->cmd_lock); + + /* Set up the host command structure. */ + state->msg->version = 2; + state->msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset; + state->msg->outsize = sizeof(struct ec_params_motion_sense); + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = pdev->name; + + if (physical_device) { + indio_dev->modes = INDIO_DIRECT_MODE; + + state->param.cmd = MOTIONSENSE_CMD_INFO; + state->param.info.sensor_num = sensor_platform->sensor_num; + if (cros_ec_motion_send_host_cmd(state, 0)) { + dev_warn(dev, "Can not access sensor info\n"); + return -EIO; + } + state->type = state->resp->info.type; + state->loc = state->resp->info.location; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cros_ec_sensors_core_init); + +int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *state, + u16 opt_length) +{ + int ret; + + if (opt_length) + state->msg->insize = min(opt_length, state->ec->max_response); + else + state->msg->insize = state->ec->max_response; + + memcpy(state->msg->data, &state->param, sizeof(state->param)); + + ret = cros_ec_cmd_xfer_status(state->ec, state->msg); + if (ret < 0) + return -EIO; + + if (ret && + state->resp != (struct ec_response_motion_sense *)state->msg->data) + memcpy(state->resp, state->msg->data, ret); + + return 0; +} +EXPORT_SYMBOL_GPL(cros_ec_motion_send_host_cmd); + +static ssize_t cros_ec_sensors_calibrate(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, + const char *buf, size_t len) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + int ret, i; + bool calibrate; + + ret = strtobool(buf, &calibrate); + if (ret < 0) + return ret; + if (!calibrate) + return -EINVAL; + + mutex_lock(&st->cmd_lock); + st->param.cmd = MOTIONSENSE_CMD_PERFORM_CALIB; + ret = cros_ec_motion_send_host_cmd(st, 0); + if (ret != 0) { + dev_warn(&indio_dev->dev, "Unable to calibrate sensor\n"); + } else { + /* Save values */ + for (i = CROS_EC_SENSOR_X; i < CROS_EC_SENSOR_MAX_AXIS; i++) + st->calib[i] = st->resp->perform_calib.offset[i]; + } + mutex_unlock(&st->cmd_lock); + + return ret ? ret : len; +} + +static ssize_t cros_ec_sensors_loc(struct iio_dev *indio_dev, + uintptr_t private, const struct iio_chan_spec *chan, + char *buf) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + + return snprintf(buf, PAGE_SIZE, "%s\n", cros_ec_loc[st->loc]); +} + +const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[] = { + { + .name = "calibrate", + .shared = IIO_SHARED_BY_ALL, + .write = cros_ec_sensors_calibrate + }, + { + .name = "location", + .shared = IIO_SHARED_BY_ALL, + .read = cros_ec_sensors_loc + }, + { }, +}; +EXPORT_SYMBOL_GPL(cros_ec_sensors_ext_info); + +/** + * cros_ec_sensors_idx_to_reg - convert index into offset in shared memory + * @st: pointer to state information for device + * @idx: sensor index (should be element of enum sensor_index) + * + * Return: address to read at + */ +static unsigned int cros_ec_sensors_idx_to_reg( + struct cros_ec_sensors_core_state *st, + unsigned int idx) +{ + /* + * When using LPC interface, only space for 2 Accel and one Gyro. + * First halfword of MOTIONSENSE_TYPE_ACCEL is used by angle. + */ + if (st->type == MOTIONSENSE_TYPE_ACCEL) + return EC_MEMMAP_ACC_DATA + sizeof(u16) * + (1 + idx + st->param.info.sensor_num * + CROS_EC_SENSOR_MAX_AXIS); + + return EC_MEMMAP_GYRO_DATA + sizeof(u16) * idx; +} + +static int cros_ec_sensors_cmd_read_u8(struct cros_ec_device *ec, + unsigned int offset, u8 *dest) +{ + return ec->cmd_readmem(ec, offset, 1, dest); +} + +static int cros_ec_sensors_cmd_read_u16(struct cros_ec_device *ec, + unsigned int offset, u16 *dest) +{ + __le16 tmp; + int ret = ec->cmd_readmem(ec, offset, 2, &tmp); + + if (ret >= 0) + *dest = le16_to_cpu(tmp); + + return ret; +} + +/** + * cros_ec_sensors_read_until_not_busy() - read until is not busy + * + * @st: pointer to state information for device + * + * Read from EC status byte until it reads not busy. + * Return: 8-bit status if ok, -errno on failure. + */ +static int cros_ec_sensors_read_until_not_busy( + struct cros_ec_sensors_core_state *st) +{ + struct cros_ec_device *ec = st->ec; + u8 status; + int ret, attempts = 0; + + ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, &status); + if (ret < 0) + return ret; + + while (status & EC_MEMMAP_ACC_STATUS_BUSY_BIT) { + /* Give up after enough attempts, return error. */ + if (attempts++ >= 50) + return -EIO; + + /* Small delay every so often. */ + if (attempts % 5 == 0) + msleep(25); + + ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, + &status); + if (ret < 0) + return ret; + } + + return status; +} + +/** + * read_ec_sensors_data_unsafe() - read acceleration data from EC shared memory + * @indio_dev: pointer to IIO device + * @scan_mask: bitmap of the sensor indices to scan + * @data: location to store data + * + * This is the unsafe function for reading the EC data. It does not guarantee + * that the EC will not modify the data as it is being read in. + * + * Return: 0 on success, -errno on failure. + */ +static int cros_ec_sensors_read_data_unsafe(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + struct cros_ec_device *ec = st->ec; + unsigned int i; + int ret; + + /* Read all sensors enabled in scan_mask. Each value is 2 bytes. */ + for_each_set_bit(i, &scan_mask, indio_dev->masklength) { + ret = cros_ec_sensors_cmd_read_u16(ec, + cros_ec_sensors_idx_to_reg(st, i), + data); + if (ret < 0) + return ret; + + data++; + } + + return 0; +} + +int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + struct cros_ec_device *ec = st->ec; + u8 samp_id = 0xff, status = 0; + int ret, attempts = 0; + + /* + * Continually read all data from EC until the status byte after + * all reads reflects that the EC is not busy and the sample id + * matches the sample id from before all reads. This guarantees + * that data read in was not modified by the EC while reading. + */ + while ((status & (EC_MEMMAP_ACC_STATUS_BUSY_BIT | + EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK)) != samp_id) { + /* If we have tried to read too many times, return error. */ + if (attempts++ >= 5) + return -EIO; + + /* Read status byte until EC is not busy. */ + status = cros_ec_sensors_read_until_not_busy(st); + if (status < 0) + return status; + + /* + * Store the current sample id so that we can compare to the + * sample id after reading the data. + */ + samp_id = status & EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK; + + /* Read all EC data, format it, and store it into data. */ + ret = cros_ec_sensors_read_data_unsafe(indio_dev, scan_mask, + data); + if (ret < 0) + return ret; + + /* Read status byte. */ + ret = cros_ec_sensors_cmd_read_u8(ec, EC_MEMMAP_ACC_STATUS, + &status); + if (ret < 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cros_ec_sensors_read_lpc); + +int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + int ret; + unsigned int i; + + /* Read all sensor data through a command. */ + st->param.cmd = MOTIONSENSE_CMD_DATA; + ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->data)); + if (ret != 0) { + dev_warn(&indio_dev->dev, "Unable to read sensor data\n"); + return ret; + } + + for_each_set_bit(i, &scan_mask, indio_dev->masklength) { + *data = st->resp->data.data[i]; + data++; + } + + return 0; +} +EXPORT_SYMBOL_GPL(cros_ec_sensors_read_cmd); + +irqreturn_t cros_ec_sensors_capture(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&st->cmd_lock); + + /* Clear capture data. */ + memset(st->samples, 0, indio_dev->scan_bytes); + + /* Read data based on which channels are enabled in scan mask. */ + ret = st->read_ec_sensors_data(indio_dev, + *(indio_dev->active_scan_mask), + (s16 *)st->samples); + if (ret < 0) + goto done; + + iio_push_to_buffers_with_timestamp(indio_dev, st->samples, + iio_get_time_ns(indio_dev)); + +done: + /* + * Tell the core we are done with this trigger and ready for the + * next one. + */ + iio_trigger_notify_done(indio_dev->trig); + + mutex_unlock(&st->cmd_lock); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL_GPL(cros_ec_sensors_capture); + +int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret = IIO_VAL_INT; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: + st->param.cmd = MOTIONSENSE_CMD_EC_RATE; + st->param.ec_rate.data = + EC_MOTION_SENSE_NO_VALUE; + + if (cros_ec_motion_send_host_cmd(st, 0)) + ret = -EIO; + else + *val = st->resp->ec_rate.ret; + break; + case IIO_CHAN_INFO_FREQUENCY: + st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR; + st->param.sensor_odr.data = + EC_MOTION_SENSE_NO_VALUE; + + if (cros_ec_motion_send_host_cmd(st, 0)) + ret = -EIO; + else + *val = st->resp->sensor_odr.ret; + break; + default: + break; + } + + return ret; +} +EXPORT_SYMBOL_GPL(cros_ec_sensors_core_read); + +int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int ret = 0; + + switch (mask) { + case IIO_CHAN_INFO_FREQUENCY: + st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR; + st->param.sensor_odr.data = val; + + /* Always roundup, so caller gets at least what it asks for. */ + st->param.sensor_odr.roundup = 1; + + if (cros_ec_motion_send_host_cmd(st, 0)) + ret = -EIO; + break; + case IIO_CHAN_INFO_SAMP_FREQ: + st->param.cmd = MOTIONSENSE_CMD_EC_RATE; + st->param.ec_rate.data = val; + + if (cros_ec_motion_send_host_cmd(st, 0)) + ret = -EIO; + else + st->curr_sampl_freq = val; + break; + default: + ret = -EINVAL; + break; + } + return ret; +} +EXPORT_SYMBOL_GPL(cros_ec_sensors_core_write); + +MODULE_DESCRIPTION("ChromeOS EC sensor hub core functions"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h new file mode 100644 index 0000000000000000000000000000000000000000..8bc2ca3c2e2e0db73a2ccb9bab69b2be69d0ffc3 --- /dev/null +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h @@ -0,0 +1,175 @@ +/* + * ChromeOS EC sensor hub + * + * Copyright (C) 2016 Google, Inc + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CROS_EC_SENSORS_CORE_H +#define __CROS_EC_SENSORS_CORE_H + +#include + +enum { + CROS_EC_SENSOR_X, + CROS_EC_SENSOR_Y, + CROS_EC_SENSOR_Z, + CROS_EC_SENSOR_MAX_AXIS, +}; + +/* EC returns sensor values using signed 16 bit registers */ +#define CROS_EC_SENSOR_BITS 16 + +/* + * 4 16 bit channels are allowed. + * Good enough for current sensors, they use up to 3 16 bit vectors. + */ +#define CROS_EC_SAMPLE_SIZE (sizeof(s64) * 2) + +/* Minimum sampling period to use when device is suspending */ +#define CROS_EC_MIN_SUSPEND_SAMPLING_FREQUENCY 1000 /* 1 second */ + +/** + * struct cros_ec_sensors_core_state - state data for EC sensors IIO driver + * @ec: cros EC device structure + * @cmd_lock: lock used to prevent simultaneous access to the + * commands. + * @msg: cros EC command structure + * @param: motion sensor parameters structure + * @resp: motion sensor response structure + * @type: type of motion sensor + * @loc: location where the motion sensor is placed + * @calib: calibration parameters. Note that trigger + * captured data will always provide the calibrated + * data + * @samples: static array to hold data from a single capture. + * For each channel we need 2 bytes, except for + * the timestamp. The timestamp is always last and + * is always 8-byte aligned. + * @read_ec_sensors_data: function used for accessing sensors values + * @cuur_sampl_freq: current sampling period + */ +struct cros_ec_sensors_core_state { + struct cros_ec_device *ec; + struct mutex cmd_lock; + + struct cros_ec_command *msg; + struct ec_params_motion_sense param; + struct ec_response_motion_sense *resp; + + enum motionsensor_type type; + enum motionsensor_location loc; + + s16 calib[CROS_EC_SENSOR_MAX_AXIS]; + + u8 samples[CROS_EC_SAMPLE_SIZE]; + + int (*read_ec_sensors_data)(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data); + + int curr_sampl_freq; +}; + +/** + * cros_ec_sensors_read_lpc() - retrieve data from EC shared memory + * @indio_dev: pointer to IIO device + * @scan_mask: bitmap of the sensor indices to scan + * @data: location to store data + * + * This is the safe function for reading the EC data. It guarantees that the + * data sampled was not modified by the EC while being read. + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask, + s16 *data); + +/** + * cros_ec_sensors_read_cmd() - retrieve data using the EC command protocol + * @indio_dev: pointer to IIO device + * @scan_mask: bitmap of the sensor indices to scan + * @data: location to store data + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_sensors_read_cmd(struct iio_dev *indio_dev, unsigned long scan_mask, + s16 *data); + +/** + * cros_ec_sensors_core_init() - basic initialization of the core structure + * @pdev: platform device created for the sensors + * @indio_dev: iio device structure of the device + * @physical_device: true if the device refers to a physical device + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_sensors_core_init(struct platform_device *pdev, + struct iio_dev *indio_dev, bool physical_device); + +/** + * cros_ec_sensors_capture() - the trigger handler function + * @irq: the interrupt number. + * @p: a pointer to the poll function. + * + * On a trigger event occurring, if the pollfunc is attached then this + * handler is called as a threaded interrupt (and hence may sleep). It + * is responsible for grabbing data from the device and pushing it into + * the associated buffer. + * + * Return: IRQ_HANDLED + */ +irqreturn_t cros_ec_sensors_capture(int irq, void *p); + +/** + * cros_ec_motion_send_host_cmd() - send motion sense host command + * @st: pointer to state information for device + * @opt_length: optional length to reduce the response size, useful on the data + * path. Otherwise, the maximal allowed response size is used + * + * When called, the sub-command is assumed to be set in param->cmd. + * + * Return: 0 on success, -errno on failure. + */ +int cros_ec_motion_send_host_cmd(struct cros_ec_sensors_core_state *st, + u16 opt_length); + +/** + * cros_ec_sensors_core_read() - function to request a value from the sensor + * @st: pointer to state information for device + * @chan: channel specification structure table + * @val: will contain one element making up the returned value + * @val2: will contain another element making up the returned value + * @mask: specifies which values to be requested + * + * Return: the type of value returned by the device + */ +int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask); + +/** + * cros_ec_sensors_core_write() - function to write a value to the sensor + * @st: pointer to state information for device + * @chan: channel specification structure table + * @val: first part of value to write + * @val2: second part of value to write + * @mask: specifies which values to write + * + * Return: the type of value returned by the device + */ +int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st, + struct iio_chan_spec const *chan, + int val, int val2, long mask); + +/* List of extended channel specification for all sensors */ +extern const struct iio_chan_spec_ext_info cros_ec_sensors_ext_info[]; + +#endif /* __CROS_EC_SENSORS_CORE_H */ diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 76f7ef4d3a0d6781b20c01314cb60a2e84d307f5..1f85b7aff097a0efd9fb7a42a0f1ba46be13b61d 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -148,6 +148,15 @@ struct cros_ec_device { int event_size; }; +/** + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information + * + * @sensor_num: Id of the sensor, as reported by the EC. + */ +struct cros_ec_sensor_platform { + u8 sensor_num; +}; + /* struct cros_ec_platform - ChromeOS EC platform information * * @ec_name: name of EC device (e.g. 'cros-ec', 'cros-pd', ...) diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 76728ff37d019645ed51e1fa32967a7a4634d785..8826e0f64b0e0ec54b8d5474ae4012ae8f67b1fd 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -1315,6 +1315,24 @@ enum motionsense_command { */ MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, + /* + * Returns a single sensor data. + */ + MOTIONSENSE_CMD_DATA = 6, + + /* + * Perform low level calibration.. On sensors that support it, ask to + * do offset calibration. + */ + MOTIONSENSE_CMD_PERFORM_CALIB = 10, + + /* + * Sensor Offset command is a setter/getter command for the offset used + * for calibration. The offsets can be calculated by the host, or via + * PERFORM_CALIB command. + */ + MOTIONSENSE_CMD_SENSOR_OFFSET = 11, + /* Number of motionsense sub-commands. */ MOTIONSENSE_NUM_CMDS }; @@ -1335,12 +1353,18 @@ enum motionsensor_id { enum motionsensor_type { MOTIONSENSE_TYPE_ACCEL = 0, MOTIONSENSE_TYPE_GYRO = 1, + MOTIONSENSE_TYPE_MAG = 2, + MOTIONSENSE_TYPE_PROX = 3, + MOTIONSENSE_TYPE_LIGHT = 4, + MOTIONSENSE_TYPE_ACTIVITY = 5, + MOTIONSENSE_TYPE_MAX }; /* List of motion sensor locations. */ enum motionsensor_location { MOTIONSENSE_LOC_BASE = 0, MOTIONSENSE_LOC_LID = 1, + MOTIONSENSE_LOC_MAX, }; /* List of motion sensor chips. */ @@ -1361,6 +1385,31 @@ enum motionsensor_chip { */ #define EC_MOTION_SENSE_NO_VALUE -1 +#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000 + +/* Set Calibration information */ +#define MOTION_SENSE_SET_OFFSET 1 + +struct ec_response_motion_sensor_data { + /* Flags for each sensor. */ + uint8_t flags; + /* Sensor number the data comes from */ + uint8_t sensor_num; + /* Each sensor is up to 3-axis. */ + union { + int16_t data[3]; + struct { + uint16_t rsvd; + uint32_t timestamp; + } __packed; + struct { + uint8_t activity; /* motionsensor_activity */ + uint8_t state; + int16_t add_info[2]; + }; + }; +} __packed; + struct ec_params_motion_sense { uint8_t cmd; union { @@ -1378,9 +1427,37 @@ struct ec_params_motion_sense { int16_t data; } ec_rate, kb_wake_angle; + /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ + struct { + uint8_t sensor_num; + + /* + * bit 0: If set (MOTION_SENSE_SET_OFFSET), set + * the calibration information in the EC. + * If unset, just retrieve calibration information. + */ + uint16_t flags; + + /* + * Temperature at calibration, in units of 0.01 C + * 0x8000: invalid / unknown. + * 0x0: 0C + * 0x7fff: +327.67C + */ + int16_t temp; + + /* + * Offset for calibration. + * Unit: + * Accelerometer: 1/1024 g + * Gyro: 1/1024 deg/s + * Compass: 1/16 uT + */ + int16_t offset[3]; + } __packed sensor_offset; + /* Used for MOTIONSENSE_CMD_INFO. */ struct { - /* Should be element of enum motionsensor_id. */ uint8_t sensor_num; } info; @@ -1410,11 +1487,14 @@ struct ec_response_motion_sense { /* Flags representing the motion sensor module. */ uint8_t module_flags; - /* Flags for each sensor in enum motionsensor_id. */ - uint8_t sensor_flags[EC_MOTION_SENSOR_COUNT]; + /* Number of sensors managed directly by the EC. */ + uint8_t sensor_count; - /* Array of all sensor data. Each sensor is 3-axis. */ - int16_t data[3*EC_MOTION_SENSOR_COUNT]; + /* + * Sensor data is truncated if response_max is too small + * for holding all the data. + */ + struct ec_response_motion_sensor_data sensor[0]; } dump; /* Used for MOTIONSENSE_CMD_INFO. */ @@ -1429,6 +1509,9 @@ struct ec_response_motion_sense { uint8_t chip; } info; + /* Used for MOTIONSENSE_CMD_DATA */ + struct ec_response_motion_sensor_data data; + /* * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, * MOTIONSENSE_CMD_SENSOR_RANGE, and @@ -1438,6 +1521,12 @@ struct ec_response_motion_sense { /* Current value of the parameter queried. */ int32_t ret; } ec_rate, sensor_odr, sensor_range, kb_wake_angle; + + /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ + struct { + int16_t temp; + int16_t offset[3]; + } sensor_offset, perform_calib; }; } __packed;