Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 97148ba2 编写于 作者: J Jeff Garzik
浏览文件
操作

Merge branch 'master' into upstream

上级 76ff3c6e 05ff0e29
展开全部 隐藏空白更改
内联 并排
Showing with 988 addition and 790 deletion
arch/arm/mach-ixp4xx/nslu2-pci.c
浏览文件 @ 97148ba2
......@@ -17,6 +17,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
......
arch/arm/mach-ixp4xx/nslu2-power.c
浏览文件 @ 97148ba2
......@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>
......
arch/arm/mach-s3c2410/Makefile
浏览文件 @ 97148ba2
......@@ -28,6 +28,7 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
# S3C2412 support
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412-irq.o
obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o
#
......
arch/arm/mach-s3c2410/cpu.h
浏览文件 @ 97148ba2
......@@ -8,16 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 24-Aug-2004 BJD Start of generic S3C24XX support
* 18-Oct-2004 BJD Moved board struct into this file
* 04-Jan-2005 BJD New uart initialisation
* 10-Jan-2005 BJD Moved generic init here, specific to cpu headers
* 14-Jan-2005 BJD Added s3c24xx_init_clocks() call
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
* 14-Mar-2005 BJD Updated for __iomem
* 15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
*/
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
......
arch/arm/mach-s3c2410/devs.c
浏览文件 @ 97148ba2
/* linux/arch/arm/mach-s3c2410/devs.c
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* Ben Dooks <ben@simtec.co.uk>
*
* Base S3C2410 platform device definitions
* Base S3C24XX platform device definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
* 10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
* 10-Feb-2005 BJD Added camera from guillaume.gourat@nexvision.tv
* 29-Aug-2004 BJD Added timers 0 through 3
* 29-Aug-2004 BJD Changed index of devices we only have one of to -1
* 21-Aug-2004 BJD Added IRQ_TICK to RTC resources
* 18-Aug-2004 BJD Created initial version
*/
#include <linux/kernel.h>
......
arch/arm/mach-s3c2410/irq.c
浏览文件 @ 97148ba2
......@@ -86,7 +86,7 @@ unsigned long s3c_irqwake_intmask = 0xffffffffL;
unsigned long s3c_irqwake_eintallow = 0x0000fff0L;
unsigned long s3c_irqwake_eintmask = 0xffffffffL;
static int
int
s3c_irq_wake(unsigned int irqno, unsigned int state)
{
unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
......@@ -260,7 +260,7 @@ s3c_irqext_unmask(unsigned int irqno)
s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23);
}
static int
int
s3c_irqext_type(unsigned int irq, unsigned int type)
{
void __iomem *extint_reg;
......
arch/arm/mach-s3c2410/irq.h
浏览文件 @ 97148ba2
......@@ -97,3 +97,8 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
__raw_writel(parentmask, S3C2410_INTPND);
}
}
/* exported for use in arch/arm/mach-s3c2410 */
extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
extern int s3c_irqext_type(unsigned int irq, unsigned int type);
arch/arm/mach-s3c2410/mach-bast.c
浏览文件 @ 97148ba2
......@@ -8,31 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 14-Sep-2004 BJD USB power control
* 20-Aug-2004 BJD Added s3c2410_board struct
* 18-Aug-2004 BJD Added platform devices from default set
* 16-May-2003 BJD Created initial version
* 16-Aug-2003 BJD Fixed header files and copyright, added URL
* 05-Sep-2003 BJD Moved to v2.6 kernel
* 06-Jan-2003 BJD Updates for <arch/map.h>
* 18-Jan-2003 BJD Added serial port configuration
* 05-Oct-2004 BJD Power management code
* 04-Nov-2004 BJD Updated serial port clocks
* 04-Jan-2005 BJD New uart init call
* 10-Jan-2005 BJD Removed include of s3c2410.h
* 14-Jan-2005 BJD Add support for muitlple NAND devices
* 03-Mar-2005 BJD Ensured that bast-cpld.h is included
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2005 BJD Updated for __iomem changes
* 22-Jun-2005 BJD Added DM9000 platform information
* 28-Jun-2005 BJD Moved pm functionality out to common code
* 17-Jul-2005 BJD Changed to platform device for SuperIO 16550s
* 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
* 20-Sep-2005 BJD Added static to non-exported items
* 26-Oct-2005 BJD Added FB platform data
*/
#include <linux/kernel.h>
......
arch/arm/mach-s3c2410/mach-h1940.c
浏览文件 @ 97148ba2
......@@ -9,23 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 16-May-2003 BJD Created initial version
* 16-Aug-2003 BJD Fixed header files and copyright, added URL
* 05-Sep-2003 BJD Moved to v2.6 kernel
* 06-Jan-2003 BJD Updates for <arch/map.h>
* 18-Jan-2003 BJD Added serial port configuration
* 17-Feb-2003 BJD Copied to mach-ipaq.c
* 21-Aug-2004 BJD Added struct s3c2410_board
* 04-Sep-2004 BJD Changed uart init, renamed ipaq_ -> h1940_
* 18-Oct-2004 BJD Updated new board structure name
* 04-Nov-2004 BJD Change for new serial clock
* 04-Jan-2005 BJD Updated uart init call
* 10-Jan-2005 BJD Removed include of s3c2410.h
* 14-Jan-2005 BJD Added clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 20-Sep-2005 BJD Added static to non-exported items
* 26-Oct-2005 BJD Changed name of fb init call
*/
#include <linux/kernel.h>
......
arch/arm/mach-s3c2410/mach-rx3715.c
浏览文件 @ 97148ba2
......@@ -9,15 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 16-Sep-2004 BJD Copied from mach-h1940.c
* 25-Oct-2004 BJD Updates for 2.6.10-rc1
* 10-Jan-2005 BJD Removed include of s3c2410.h s3c2440.h
* 14-Jan-2005 BJD Added new clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2005 BJD Fixed __iomem warnings
* 20-Sep-2005 BJD Added static to non-exported items
* 31-Oct-2005 BJD Added LCD setup for framebuffer
*/
#include <linux/kernel.h>
......
arch/arm/mach-s3c2410/mach-smdk2410.c
浏览文件 @ 97148ba2
......@@ -27,10 +27,6 @@
* derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
* Ben Dooks <ben@simtec.co.uk>
*
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 20-Sep-2005 BJD Added static to non-exported items
* 01-Apr-2006 BJD Moved init code to common smdk
*
***********************************************************************/
#include <linux/kernel.h>
......
arch/arm/mach-s3c2410/mach-smdk2413.c
浏览文件 @ 97148ba2
......@@ -112,7 +112,20 @@ static void __init smdk2413_machine_init(void)
smdk_machine_init();
}
MACHINE_START(S3C2413, "SMDK2413")
MACHINE_START(S3C2413, "S3C2413")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
......
arch/arm/mach-s3c2410/mach-vr1000.c
浏览文件 @ 97148ba2
......@@ -10,25 +10,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 14-Sep-2004 BJD USB Power control
* 04-Sep-2004 BJD Added new uart init, and io init
* 21-Aug-2004 BJD Added struct s3c2410_board
* 06-Aug-2004 BJD Fixed call to time initialisation
* 05-Apr-2004 BJD Copied to make mach-vr1000.c
* 18-Oct-2004 BJD Updated board struct
* 04-Nov-2004 BJD Clock and serial configuration update
*
* 04-Jan-2005 BJD Updated uart init call
* 10-Jan-2005 BJD Removed include of s3c2410.h
* 14-Jan-2005 BJD Added clock init
* 15-Jan-2005 BJD Add serial port device definition
* 20-Jan-2005 BJD Use UPF_IOREMAP for ports
* 10-Feb-2005 BJD Added power-off capability
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 14-Mar-2006 BJD void __iomem fixes
* 22-Jun-2006 BJD Added DM9000 platform information
* 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
......
arch/arm/mach-s3c2410/s3c2400-gpio.c
浏览文件 @ 97148ba2
......@@ -17,10 +17,7 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Changelog
* 15-Jan-2006 LCVR Splitted from gpio.c, adding support for the S3C2400
*/
*/
#include <linux/kernel.h>
#include <linux/init.h>
......
arch/arm/mach-s3c2410/s3c2410.h
浏览文件 @ 97148ba2
......@@ -9,14 +9,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 18-Aug-2004 BJD Created initial version
* 20-Aug-2004 BJD Added s3c2410_board struct
* 04-Sep-2004 BJD Added s3c2410_init_uarts() call
* 17-Oct-2004 BJD Moved board out to cpu
* 04-Jan-2005 BJD Changed uart init
* 10-Jan-2005 BJD Removed timer to cpu.h, moved 2410 specific bits here
* 14-Jan-2005 BJD Added s3c2410_init_clocks call
*/
#ifdef CONFIG_CPU_S3C2410
......
arch/arm/mach-s3c2410/s3c2412-irq.c 0 → 100644
浏览文件 @ 97148ba2
/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/ptrace.h>
#include <linux/sysdev.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/arch/regs-irq.h>
#include <asm/arch/regs-gpio.h>
#include "cpu.h"
#include "irq.h"
/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
* having them turn up in both the INT* and the EINT* registers. Whilst
* both show the status, they both now need to be acked when the IRQs
* go off.
*/
static void
s3c2412_irq_mask(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
unsigned long mask;
mask = __raw_readl(S3C2410_INTMSK);
__raw_writel(mask | bitval, S3C2410_INTMSK);
mask = __raw_readl(S3C2412_EINTMASK);
__raw_writel(mask | bitval, S3C2412_EINTMASK);
}
static inline void
s3c2412_irq_ack(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
__raw_writel(bitval, S3C2412_EINTPEND);
__raw_writel(bitval, S3C2410_SRCPND);
__raw_writel(bitval, S3C2410_INTPND);
}
static inline void
s3c2412_irq_maskack(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
unsigned long mask;
mask = __raw_readl(S3C2410_INTMSK);
__raw_writel(mask|bitval, S3C2410_INTMSK);
mask = __raw_readl(S3C2412_EINTMASK);
__raw_writel(mask | bitval, S3C2412_EINTMASK);
__raw_writel(bitval, S3C2412_EINTPEND);
__raw_writel(bitval, S3C2410_SRCPND);
__raw_writel(bitval, S3C2410_INTPND);
}
static void
s3c2412_irq_unmask(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
unsigned long mask;
mask = __raw_readl(S3C2412_EINTMASK);
__raw_writel(mask & ~bitval, S3C2412_EINTMASK);
mask = __raw_readl(S3C2410_INTMSK);
__raw_writel(mask & ~bitval, S3C2410_INTMSK);
}
static struct irqchip s3c2412_irq_eint0t4 = {
.ack = s3c2412_irq_ack,
.mask = s3c2412_irq_mask,
.unmask = s3c2412_irq_unmask,
.set_wake = s3c_irq_wake,
.set_type = s3c_irqext_type,
};
static int s3c2412_irq_add(struct sys_device *sysdev)
{
unsigned int irqno;
for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
set_irq_chip(irqno, &s3c2412_irq_eint0t4);
set_irq_handler(irqno, do_edge_IRQ);
set_irq_flags(irqno, IRQF_VALID);
}
return 0;
}
static struct sysdev_driver s3c2412_irq_driver = {
.add = s3c2412_irq_add,
};
static int s3c2412_irq_init(void)
{
return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
}
arch_initcall(s3c2412_irq_init);
arch/arm/mach-s3c2410/s3c2440-irq.c
浏览文件 @ 97148ba2
......@@ -17,9 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Changelog:
* 25-Jul-2005 BJD Split from irq.c
*
*/
#include <linux/init.h>
......
arch/arm/mach-s3c2410/s3c244x-irq.c
浏览文件 @ 97148ba2
......@@ -17,9 +17,6 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Changelog:
* 25-Jul-2005 BJD Split from irq.c
*
*/
#include <linux/init.h>
......@@ -122,21 +119,24 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
return 0;
}
static struct sysdev_driver s3c244x_irq_driver = {
static struct sysdev_driver s3c2440_irq_driver = {
.add = s3c244x_irq_add,
};
static int s3c2440_irq_init(void)
{
return sysdev_driver_register(&s3c2440_sysclass, &s3c244x_irq_driver);
return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
}
arch_initcall(s3c2440_irq_init);
static struct sysdev_driver s3c2442_irq_driver = {
.add = s3c244x_irq_add,
};
static int s3c2442_irq_init(void)
{
return sysdev_driver_register(&s3c2442_sysclass, &s3c244x_irq_driver);
return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
}
arch_initcall(s3c2442_irq_init);
arch/arm/mm/proc-arm926.S
浏览文件 @ 97148ba2
......@@ -480,7 +480,7 @@ __arm926_proc_info:
b __arm926_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
.long cpu_arm926_name
.long arm926_processor_functions
.long v4wbi_tlb_fns
......
arch/frv/Kconfig
浏览文件 @ 97148ba2
......@@ -29,6 +29,10 @@ config GENERIC_HARDIRQS
bool
default n
config GENERIC_TIME
bool
default y
config TIME_LOW_RES
bool
default y
......
arch/frv/kernel/time.c
浏览文件 @ 97148ba2
......@@ -32,8 +32,6 @@
#define TICK_SIZE (tick_nsec / 1000)
extern unsigned long wall_jiffies;
unsigned long __nongprelbss __clkin_clock_speed_HZ;
unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
unsigned long __nongprelbss __res_bus_clock_speed_HZ;
......@@ -144,85 +142,6 @@ void time_init(void)
time_divisor_init();
}
/*
* This version of gettimeofday has near microsecond resolution.
*/
void do_gettimeofday(struct timeval *tv)
{
unsigned long seq;
unsigned long usec, sec;
unsigned long max_ntp_tick;
do {
unsigned long lost;
seq = read_seqbegin(&xtime_lock);
usec = 0;
lost = jiffies - wall_jiffies;
/*
* If time_adjust is negative then NTP is slowing the clock
* so make sure not to go into next possible interval.
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0)) {
max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
usec = min(usec, max_ntp_tick);
if (lost)
usec += lost * max_ntp_tick;
}
else if (unlikely(lost))
usec += lost * (USEC_PER_SEC / HZ);
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
} while (read_seqretry(&xtime_lock, seq));
while (usec >= 1000000) {
usec -= 1000000;
sec++;
}
tv->tv_sec = sec;
tv->tv_usec = usec;
}
EXPORT_SYMBOL(do_gettimeofday);
int do_settimeofday(struct timespec *tv)
{
time_t wtm_sec, sec = tv->tv_sec;
long wtm_nsec, nsec = tv->tv_nsec;
if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
return -EINVAL;
write_seqlock_irq(&xtime_lock);
/*
* This is revolting. We need to set "xtime" correctly. However, the
* value in this location is the value at the most recent update of
* wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
nsec -= 0 * NSEC_PER_USEC;
nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
set_normalized_timespec(&xtime, sec, nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
ntp_clear();
write_sequnlock_irq(&xtime_lock);
clock_was_set();
return 0;
}
EXPORT_SYMBOL(do_settimeofday);
/*
* Scheduler clock - returns current time in nanosec units.
*/
......
arch/i386/kernel/audit.c
浏览文件 @ 97148ba2
......@@ -8,13 +8,41 @@ static unsigned dir_class[] = {
~0U
};
static unsigned read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
static unsigned write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
static unsigned chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
int audit_classify_syscall(int abi, unsigned syscall)
{
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 0;
}
}
static int __init audit_classes_init(void)
{
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
return 0;
......
arch/ia64/ia32/audit.c
浏览文件 @ 97148ba2
......@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
unsigned ia32_write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
unsigned ia32_read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
int ia32_classify_syscall(unsigned syscall)
{
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 1;
}
}
arch/ia64/kernel/audit.c
浏览文件 @ 97148ba2
......@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
~0U
};
static unsigned read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
static unsigned write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
static unsigned chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_IA32_SUPPORT
extern int ia32_classify_syscall(unsigned);
if (abi == AUDIT_ARCH_I386)
return ia32_classify_syscall(syscall);
#endif
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_execve:
return 5;
default:
return 0;
}
}
static int __init audit_classes_init(void)
{
#ifdef CONFIG_IA32_SUPPORT
extern __u32 ia32_dir_class[];
extern __u32 ia32_write_class[];
extern __u32 ia32_read_class[];
extern __u32 ia32_chattr_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
return 0;
......
arch/ia64/kernel/entry.S
浏览文件 @ 97148ba2
......@@ -1605,8 +1605,8 @@ sys_call_table:
data8 sys_ni_syscall // 1295 reserved for ppoll
data8 sys_unshare
data8 sys_splice
data8 sys_set_robust_list
data8 sys_get_robust_list
data8 sys_ni_syscall // reserved for set_robust_list
data8 sys_ni_syscall // reserved for get_robust_list
data8 sys_sync_file_range // 1300
data8 sys_tee
data8 sys_vmsplice
......
arch/ia64/kernel/head.S
浏览文件 @ 97148ba2
......@@ -197,6 +197,11 @@ start_ap:
;;
srlz.i
;;
{
flushrs // must be first insn in group
srlz.i
}
;;
/*
* Save the region registers, predicate before they get clobbered
*/
......
arch/ia64/kernel/perfmon.c
浏览文件 @ 97148ba2
......@@ -4936,13 +4936,15 @@ sys_perfmonctl (int fd, int cmd, void __user *arg, int count)
if (likely(ctx)) {
DPRINT(("context unlocked\n"));
UNPROTECT_CTX(ctx, flags);
fput(file);
}
/* copy argument back to user, if needed */
if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
error_args:
if (file)
fput(file);
kfree(args_k);
DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret));
......
arch/ia64/kernel/sys_ia64.c
浏览文件 @ 97148ba2
......@@ -163,10 +163,25 @@ sys_pipe (void)
return retval;
}
int ia64_mmap_check(unsigned long addr, unsigned long len,
unsigned long flags)
{
unsigned long roff;
/*
* Don't permit mappings into unmapped space, the virtual page table
* of a region, or across a region boundary. Note: RGN_MAP_LIMIT is
* equal to 2^n-PAGE_SIZE (for some integer n <= 61) and len > 0.
*/
roff = REGION_OFFSET(addr);
if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len)))
return -EINVAL;
return 0;
}
static inline unsigned long
do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff)
{
unsigned long roff;
struct file *file = NULL;
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
......@@ -188,17 +203,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un
goto out;
}
/*
* Don't permit mappings into unmapped space, the virtual page table of a region,
* or across a region boundary. Note: RGN_MAP_LIMIT is equal to 2^n-PAGE_SIZE
* (for some integer n <= 61) and len > 0.
*/
roff = REGION_OFFSET(addr);
if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len))) {
addr = -EINVAL;
goto out;
}
down_write(&current->mm->mmap_sem);
addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
up_write(&current->mm->mmap_sem);
......
arch/ia64/sn/kernel/setup.c
浏览文件 @ 97148ba2
......@@ -565,7 +565,7 @@ static void __init sn_init_pdas(char **cmdline_p)
* Also sets up a few fields in the nodepda. Also known as
* platform_cpu_init() by the ia64 machvec code.
*/
void __init sn_cpu_init(void)
void __cpuinit sn_cpu_init(void)
{
int cpuid;
int cpuphyid;
......
arch/powerpc/kernel/Makefile
浏览文件 @ 97148ba2
......@@ -70,6 +70,8 @@ obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
kexec-$(CONFIG_PPC64) := machine_kexec_64.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y)
obj-$(CONFIG_AUDIT) += audit.o
obj64-$(CONFIG_AUDIT) += compat_audit.o
ifeq ($(CONFIG_PPC_ISERIES),y)
$(obj)/head_64.o: $(obj)/lparmap.s
......
arch/powerpc/kernel/audit.c 0 → 100644
浏览文件 @ 97148ba2
#include <linux/init.h>
#include <linux/types.h>
#include <linux/audit.h>
#include <asm/unistd.h>
static unsigned dir_class[] = {
#include <asm-generic/audit_dir_write.h>
~0U
};
static unsigned read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
static unsigned write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
static unsigned chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_PPC64
extern int ppc32_classify_syscall(unsigned);
if (abi == AUDIT_ARCH_PPC)
return ppc32_classify_syscall(syscall);
#endif
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 0;
}
}
static int __init audit_classes_init(void)
{
#ifdef CONFIG_PPC64
extern __u32 ppc32_dir_class[];
extern __u32 ppc32_write_class[];
extern __u32 ppc32_read_class[];
extern __u32 ppc32_chattr_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
return 0;
}
__initcall(audit_classes_init);
arch/powerpc/kernel/compat_audit.c 0 → 100644
浏览文件 @ 97148ba2
#undef __powerpc64__
#include <asm/unistd.h>
unsigned ppc32_dir_class[] = {
#include <asm-generic/audit_dir_write.h>
~0U
};
unsigned ppc32_chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
unsigned ppc32_write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
unsigned ppc32_read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
int ppc32_classify_syscall(unsigned syscall)
{
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 1;
}
}
arch/s390/kernel/Makefile
浏览文件 @ 97148ba2
......@@ -16,9 +16,11 @@ extra-y += head.o init_task.o vmlinux.lds
obj-$(CONFIG_MODULES) += s390_ksyms.o module.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_AUDIT) += audit.o
compat-obj-$(CONFIG_AUDIT) += compat_audit.o
obj-$(CONFIG_COMPAT) += compat_linux.o compat_signal.o \
compat_wrapper.o compat_exec_domain.o \
binfmt_elf32.o
binfmt_elf32.o $(compat-obj-y)
obj-$(CONFIG_VIRT_TIMER) += vtime.o
obj-$(CONFIG_STACKTRACE) += stacktrace.o
......
arch/s390/kernel/audit.c 0 → 100644
浏览文件 @ 97148ba2
#include <linux/init.h>
#include <linux/types.h>
#include <linux/audit.h>
#include <asm/unistd.h>
static unsigned dir_class[] = {
#include <asm-generic/audit_dir_write.h>
~0U
};
static unsigned read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
static unsigned write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
static unsigned chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_COMPAT
extern int s390_classify_syscall(unsigned);
if (abi == AUDIT_ARCH_S390)
return s390_classify_syscall(syscall);
#endif
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 0;
}
}
static int __init audit_classes_init(void)
{
#ifdef CONFIG_COMPAT
extern __u32 s390_dir_class[];
extern __u32 s390_write_class[];
extern __u32 s390_read_class[];
extern __u32 s390_chattr_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, s390_write_class);
audit_register_class(AUDIT_CLASS_READ_32, s390_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, s390_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, s390_chattr_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
return 0;
}
__initcall(audit_classes_init);
arch/s390/kernel/compat_audit.c 0 → 100644
浏览文件 @ 97148ba2
#undef __s390x__
#include <asm/unistd.h>
unsigned s390_dir_class[] = {
#include <asm-generic/audit_dir_write.h>
~0U
};
unsigned s390_chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
unsigned s390_write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
unsigned s390_read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
int s390_classify_syscall(unsigned syscall)
{
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 1;
}
}
arch/sparc/kernel/sys_sparc.c
浏览文件 @ 97148ba2
......@@ -219,6 +219,21 @@ asmlinkage int sys_ipc (uint call, int first, int second, int third, void __user
return err;
}
int sparc_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
{
if (ARCH_SUN4C_SUN4 &&
(len > 0x20000000 ||
((flags & MAP_FIXED) &&
addr < 0xe0000000 && addr + len > 0x20000000)))
return -EINVAL;
/* See asm-sparc/uaccess.h */
if (len > TASK_SIZE - PAGE_SIZE || addr + len > TASK_SIZE - PAGE_SIZE)
return -EINVAL;
return 0;
}
/* Linux version of mmap */
static unsigned long do_mmap2(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags, unsigned long fd,
......@@ -233,25 +248,13 @@ static unsigned long do_mmap2(unsigned long addr, unsigned long len,
goto out;
}
retval = -EINVAL;
len = PAGE_ALIGN(len);
if (ARCH_SUN4C_SUN4 &&
(len > 0x20000000 ||
((flags & MAP_FIXED) &&
addr < 0xe0000000 && addr + len > 0x20000000)))
goto out_putf;
/* See asm-sparc/uaccess.h */
if (len > TASK_SIZE - PAGE_SIZE || addr + len > TASK_SIZE - PAGE_SIZE)
goto out_putf;
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
down_write(&current->mm->mmap_sem);
retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
up_write(&current->mm->mmap_sem);
out_putf:
if (file)
fput(file);
out:
......
arch/sparc64/kernel/sys_sparc.c
浏览文件 @ 97148ba2
......@@ -548,6 +548,26 @@ asmlinkage long sparc64_personality(unsigned long personality)
return ret;
}
int sparc64_mmap_check(unsigned long addr, unsigned long len,
unsigned long flags)
{
if (test_thread_flag(TIF_32BIT)) {
if (len >= STACK_TOP32)
return -EINVAL;
if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
return -EINVAL;
} else {
if (len >= VA_EXCLUDE_START)
return -EINVAL;
if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
return -EINVAL;
}
return 0;
}
/* Linux version of mmap */
asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
unsigned long prot, unsigned long flags, unsigned long fd,
......@@ -563,27 +583,11 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
}
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
len = PAGE_ALIGN(len);
retval = -EINVAL;
if (test_thread_flag(TIF_32BIT)) {
if (len >= STACK_TOP32)
goto out_putf;
if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
goto out_putf;
} else {
if (len >= VA_EXCLUDE_START)
goto out_putf;
if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
goto out_putf;
}
down_write(&current->mm->mmap_sem);
retval = do_mmap(file, addr, len, prot, flags, off);
up_write(&current->mm->mmap_sem);
out_putf:
if (file)
fput(file);
out:
......
arch/x86_64/ia32/audit.c
浏览文件 @ 97148ba2
......@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
unsigned ia32_write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
unsigned ia32_read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
int ia32_classify_syscall(unsigned syscall)
{
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_socketcall:
return 4;
case __NR_execve:
return 5;
default:
return 1;
}
}
arch/x86_64/kernel/audit.c
浏览文件 @ 97148ba2
......@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
~0U
};
static unsigned read_class[] = {
#include <asm-generic/audit_read.h>
~0U
};
static unsigned write_class[] = {
#include <asm-generic/audit_write.h>
~0U
};
static unsigned chattr_class[] = {
#include <asm-generic/audit_change_attr.h>
~0U
};
int audit_classify_syscall(int abi, unsigned syscall)
{
#ifdef CONFIG_IA32_EMULATION
extern int ia32_classify_syscall(unsigned);
if (abi == AUDIT_ARCH_I386)
return ia32_classify_syscall(syscall);
#endif
switch(syscall) {
case __NR_open:
return 2;
case __NR_openat:
return 3;
case __NR_execve:
return 5;
default:
return 0;
}
}
static int __init audit_classes_init(void)
{
#ifdef CONFIG_IA32_EMULATION
extern __u32 ia32_dir_class[];
extern __u32 ia32_write_class[];
extern __u32 ia32_read_class[];
extern __u32 ia32_chattr_class[];
audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
#endif
audit_register_class(AUDIT_CLASS_WRITE, write_class);
audit_register_class(AUDIT_CLASS_READ, read_class);
audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
return 0;
......
drivers/ide/ide-proc.c
浏览文件 @ 97148ba2
......@@ -376,6 +376,8 @@ static int proc_ide_read_media
break;
case ide_floppy:media = "floppy\n";
break;
case ide_optical:media = "optical\n";
break;
default: media = "UNKNOWN\n";
break;
}
......
drivers/ide/pci/aec62xx.c
浏览文件 @ 97148ba2
......@@ -425,12 +425,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
return d->init_setup(dev, d);
}
static const struct pci_device_id aec62xx_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
static struct pci_device_id aec62xx_pci_tbl[] = {
{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
......
drivers/ide/pci/serverworks.c
浏览文件 @ 97148ba2
......@@ -649,11 +649,11 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
}
static struct pci_device_id svwks_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1},
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3},
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
{ 0, },
};
MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
......
drivers/ide/pci/siimage.c
浏览文件 @ 97148ba2
......@@ -1082,10 +1082,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
}
static struct pci_device_id siimage_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
#ifdef CONFIG_BLK_DEV_IDE_SATA
{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1},
{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
#endif
{ 0, },
};
......
drivers/ide/pci/sis5513.c
浏览文件 @ 97148ba2
......@@ -86,6 +86,8 @@ static const struct {
u8 chipset_family;
u8 flags;
} SiSHostChipInfo[] = {
{ "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 },
{ "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 },
{ "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 },
{ "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
{ "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
......
drivers/mmc/imxmmc.c
浏览文件 @ 97148ba2
......@@ -91,6 +91,8 @@ struct imxmci_host {
int dma_allocated;
unsigned char actual_bus_width;
int prev_cmd_code;
};
#define IMXMCI_PEND_IRQ_b 0
......@@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
* partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
* This is required for SCR read at least.
*/
if (datasz < 64) {
if (datasz < 512) {
host->dma_size = datasz;
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
/* Hack to enable read SCR */
if(datasz < 16) {
MMC_NOB = 1;
MMC_BLK_LEN = 16;
}
MMC_NOB = 1;
MMC_BLK_LEN = 512;
} else {
host->dma_dir = DMA_TO_DEVICE;
}
......@@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *
spin_unlock_irqrestore(&host->lock, flags);
if(req && req->cmd)
host->prev_cmd_code = req->cmd->opcode;
host->req = NULL;
host->cmd = NULL;
host->data = NULL;
......@@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
{
int i;
int burst_len;
int flush_len;
int trans_done = 0;
unsigned int stat = *pstat;
......@@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
stat);
udelay(20); /* required for clocks < 8MHz*/
if(host->dma_dir == DMA_FROM_DEVICE) {
imxmci_busy_wait_for_status(host, &stat,
STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE,
20, "imxmci_cpu_driven_data read");
50, "imxmci_cpu_driven_data read");
while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) &&
(host->data_cnt < host->dma_size)) {
if(burst_len >= host->dma_size - host->data_cnt) {
flush_len = burst_len;
burst_len = host->dma_size - host->data_cnt;
flush_len -= burst_len;
host->data_cnt = host->dma_size;
trans_done = 1;
} else {
flush_len = 0;
host->data_cnt += burst_len;
}
(host->data_cnt < 512)) {
udelay(20); /* required for clocks < 8MHz*/
for(i = burst_len; i>=2 ; i-=2) {
*(host->data_ptr++) = MMC_BUFFER_ACCESS;
udelay(20); /* required for clocks < 8MHz*/
u16 data;
data = MMC_BUFFER_ACCESS;
udelay(10); /* required for clocks < 8MHz*/
if(host->data_cnt+2 <= host->dma_size) {
*(host->data_ptr++) = data;
} else {
if(host->data_cnt < host->dma_size)
*(u8*)(host->data_ptr) = data;
}
host->data_cnt += 2;
}
if(i == 1)
*(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS;
stat = MMC_STATUS;
/* Flush extra bytes from FIFO */
while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
i = MMC_BUFFER_ACCESS;
stat = MMC_STATUS;
stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
}
dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
burst_len, stat);
dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
host->data_cnt, burst_len, stat);
}
if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
trans_done = 1;
if(host->dma_size & 0x1ff)
stat &= ~STATUS_CRC_READ_ERR;
} else {
imxmci_busy_wait_for_status(host, &stat,
STATUS_APPL_BUFF_FE,
......@@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data)
what, stat, MMC_INT_MASK);
dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
}
if(!host->present || timeout)
......
drivers/mmc/mmc.c
浏览文件 @ 97148ba2
......@@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
EXPORT_SYMBOL(mmc_wait_for_app_cmd);
/**
* mmc_set_data_timeout - set the timeout for a data command
* @data: data phase for command
* @card: the MMC card associated with the data transfer
* @write: flag to differentiate reads from writes
*/
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
int write)
{
unsigned int mult;
/*
* SD cards use a 100 multiplier rather than 10
*/
mult = mmc_card_sd(card) ? 100 : 10;
/*
* Scale up the multiplier (and therefore the timeout) by
* the r2w factor for writes.
*/
if (write)
mult <<= card->csd.r2w_factor;
data->timeout_ns = card->csd.tacc_ns * mult;
data->timeout_clks = card->csd.tacc_clks * mult;
/*
* SD cards also have an upper limit on the timeout.
*/
if (mmc_card_sd(card)) {
unsigned int timeout_us, limit_us;
timeout_us = data->timeout_ns / 1000;
timeout_us += data->timeout_clks * 1000 /
(card->host->ios.clock / 1000);
if (write)
limit_us = 250000;
else
limit_us = 100000;
if (timeout_us > limit_us) {
data->timeout_ns = limit_us * 1000;
data->timeout_clks = 0;
}
}
}
EXPORT_SYMBOL(mmc_set_data_timeout);
static int mmc_select_card(struct mmc_host *host, struct mmc_card *card);
/**
......@@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host)
{
int err;
struct mmc_card *card;
struct mmc_request mrq;
struct mmc_command cmd;
struct mmc_data data;
struct scatterlist sg;
list_for_each_entry(card, &host->cards, node) {
......@@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host)
memset(&data, 0, sizeof(struct mmc_data));
data.timeout_ns = card->csd.tacc_ns * 10;
data.timeout_clks = card->csd.tacc_clks * 10;
mmc_set_data_timeout(&data, card, 0);
data.blksz_bits = 3;
data.blksz = 1 << 3;
data.blocks = 1;
......
drivers/mmc/mmc_block.c
浏览文件 @ 97148ba2
......@@ -30,6 +30,7 @@
#include <linux/mutex.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <asm/system.h>
......@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.cmd.arg = req->sector << 9;
brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
brq.data.timeout_ns = card->csd.tacc_ns * 10;
brq.data.timeout_clks = card->csd.tacc_clks * 10;
brq.data.blksz_bits = md->block_bits;
brq.data.blksz = 1 << md->block_bits;
brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
......@@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
if (rq_data_dir(req) == READ) {
brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
brq.data.flags |= MMC_DATA_READ;
......@@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.cmd.opcode = MMC_WRITE_BLOCK;
brq.data.flags |= MMC_DATA_WRITE;
brq.data.blocks = 1;
/*
* Scale up the timeout by the r2w factor
*/
brq.data.timeout_ns <<= card->csd.r2w_factor;
brq.data.timeout_clks <<= card->csd.r2w_factor;
}
if (brq.data.blocks > 1) {
......@@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
md->read_only = mmc_blk_readonly(card);
/*
* Figure out a workable block size. MMC cards have:
* - two block sizes, one for read and one for write.
* - may support partial reads and/or writes
* (allows block sizes smaller than specified)
*/
md->block_bits = card->csd.read_blkbits;
if (card->csd.write_blkbits != card->csd.read_blkbits) {
if (card->csd.write_blkbits < card->csd.read_blkbits &&
card->csd.read_partial) {
/*
* write block size is smaller than read block
* size, but we support partial reads, so choose
* the smaller write block size.
*/
md->block_bits = card->csd.write_blkbits;
} else if (card->csd.write_blkbits > card->csd.read_blkbits &&
card->csd.write_partial) {
/*
* read block size is smaller than write block
* size, but we support partial writes. Use read
* block size.
*/
} else {
/*
* We don't support this configuration for writes.
*/
printk(KERN_ERR "%s: unable to select block size for "
"writing (rb%u wb%u rp%u wp%u)\n",
mmc_card_id(card),
1 << card->csd.read_blkbits,
1 << card->csd.write_blkbits,
card->csd.read_partial,
card->csd.write_partial);
md->read_only = 1;
}
}
/*
* Refuse to allow block sizes smaller than 512 bytes.
* Both SD and MMC specifications state (although a bit
* unclearly in the MMC case) that a block size of 512
* bytes must always be supported by the card.
*/
if (md->block_bits < 9) {
printk(KERN_ERR "%s: unable to support block size %u\n",
mmc_card_id(card), 1 << md->block_bits);
ret = -EINVAL;
goto err_kfree;
}
md->block_bits = 9;
md->disk = alloc_disk(1 << MMC_SHIFT);
if (md->disk == NULL) {
......
drivers/net/Kconfig
浏览文件 @ 97148ba2
......@@ -2393,7 +2393,7 @@ config MYRI10GE
you will need a newer firmware image.
You may get this image or more information, at:
<http://www.myri.com/Myri-10G/>
<http://www.myri.com/scs/download-Myri10GE.html>
To compile this driver as a module, choose M here and read
<file:Documentation/networking/net-modules.txt>. The module
......
drivers/net/dm9000.c
浏览文件 @ 97148ba2
......@@ -377,8 +377,8 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db)
kfree(db->data_req);
}
if (db->addr_res != NULL) {
release_resource(db->addr_res);
if (db->addr_req != NULL) {
release_resource(db->addr_req);
kfree(db->addr_req);
}
}
......
drivers/usb/input/hid-core.c
浏览文件 @ 97148ba2
......@@ -1444,7 +1444,7 @@ void hid_init_reports(struct hid_device *hid)
#define USB_DEVICE_ID_GTCO_402 0x0402
#define USB_DEVICE_ID_GTCO_403 0x0403
#define USB_DEVICE_ID_GTCO_404 0x0404
#define USB_DEVICE_ID_GTCO_404 0x0405
#define USB_DEVICE_ID_GTCO_405 0x0405
#define USB_DEVICE_ID_GTCO_500 0x0500
#define USB_DEVICE_ID_GTCO_501 0x0501
#define USB_DEVICE_ID_GTCO_502 0x0502
......@@ -1657,7 +1657,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },
......
drivers/usb/input/usbtouchscreen.c
浏览文件 @ 97148ba2
......@@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
{
*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
*x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
*y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
*press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
*touch = ~pkt[7] & 0x20;
......
drivers/usb/misc/sisusbvga/sisusb.c
浏览文件 @ 97148ba2
......@@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf)
static struct usb_device_id sisusb_table [] = {
{ USB_DEVICE(0x0711, 0x0900) },
{ USB_DEVICE(0x0711, 0x0901) },
{ USB_DEVICE(0x0711, 0x0902) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
......
drivers/usb/serial/ftdi_sio.c
浏览文件 @ 97148ba2
......@@ -506,6 +506,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
......
drivers/usb/serial/ftdi_sio.h
浏览文件 @ 97148ba2
......@@ -467,6 +467,11 @@
#define TESTO_VID 0x128D
#define TESTO_USB_INTERFACE_PID 0x0001
/*
* Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
*/
#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
......
fs/ext3/inode.c
浏览文件 @ 97148ba2
......@@ -1009,11 +1009,14 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
buffer_trace_init(&dummy.b_history);
err = ext3_get_blocks_handle(handle, inode, block, 1,
&dummy, create, 1);
if (err == 1) {
/*
* ext3_get_blocks_handle() returns number of blocks
* mapped. 0 in case of a HOLE.
*/
if (err > 0) {
if (err > 1)
WARN_ON(1);
err = 0;
} else if (err >= 0) {
WARN_ON(1);
err = -EIO;
}
*errp = err;
if (!err && buffer_mapped(&dummy)) {
......
fs/nfs/direct.c
浏览文件 @ 97148ba2
......@@ -100,25 +100,6 @@ static inline int put_dreq(struct nfs_direct_req *dreq)
return atomic_dec_and_test(&dreq->io_count);
}
/*
* "size" is never larger than rsize or wsize.
*/
static inline int nfs_direct_count_pages(unsigned long user_addr, size_t size)
{
int page_count;
page_count = (user_addr + size + PAGE_SIZE - 1) >> PAGE_SHIFT;
page_count -= user_addr >> PAGE_SHIFT;
BUG_ON(page_count < 0);
return page_count;
}
static inline unsigned int nfs_max_pages(unsigned int size)
{
return (size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
}
/**
* nfs_direct_IO - NFS address space operation for direct I/O
* @rw: direction (read or write)
......@@ -276,28 +257,24 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo
struct nfs_open_context *ctx = dreq->ctx;
struct inode *inode = ctx->dentry->d_inode;
size_t rsize = NFS_SERVER(inode)->rsize;
unsigned int rpages = nfs_max_pages(rsize);
unsigned int pgbase;
int result;
ssize_t started = 0;
get_dreq(dreq);
pgbase = user_addr & ~PAGE_MASK;
do {
struct nfs_read_data *data;
size_t bytes;
pgbase = user_addr & ~PAGE_MASK;
bytes = min(rsize,count);
result = -ENOMEM;
data = nfs_readdata_alloc(rpages);
data = nfs_readdata_alloc(pgbase + bytes);
if (unlikely(!data))
break;
bytes = rsize;
if (count < rsize)
bytes = count;
data->npages = nfs_direct_count_pages(user_addr, bytes);
down_read(&current->mm->mmap_sem);
result = get_user_pages(current, current->mm, user_addr,
data->npages, 1, 0, data->pagevec, NULL);
......@@ -344,8 +321,10 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo
started += bytes;
user_addr += bytes;
pos += bytes;
/* FIXME: Remove this unnecessary math from final patch */
pgbase += bytes;
pgbase &= ~PAGE_MASK;
BUG_ON(pgbase != (user_addr & ~PAGE_MASK));
count -= bytes;
} while (count != 0);
......@@ -524,7 +503,7 @@ static void nfs_direct_write_complete(struct nfs_direct_req *dreq, struct inode
static void nfs_alloc_commit_data(struct nfs_direct_req *dreq)
{
dreq->commit_data = nfs_commit_alloc(0);
dreq->commit_data = nfs_commit_alloc();
if (dreq->commit_data != NULL)
dreq->commit_data->req = (struct nfs_page *) dreq;
}
......@@ -605,28 +584,24 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l
struct nfs_open_context *ctx = dreq->ctx;
struct inode *inode = ctx->dentry->d_inode;
size_t wsize = NFS_SERVER(inode)->wsize;
unsigned int wpages = nfs_max_pages(wsize);
unsigned int pgbase;
int result;
ssize_t started = 0;
get_dreq(dreq);
pgbase = user_addr & ~PAGE_MASK;
do {
struct nfs_write_data *data;
size_t bytes;
pgbase = user_addr & ~PAGE_MASK;
bytes = min(wsize,count);
result = -ENOMEM;
data = nfs_writedata_alloc(wpages);
data = nfs_writedata_alloc(pgbase + bytes);
if (unlikely(!data))
break;
bytes = wsize;
if (count < wsize)
bytes = count;
data->npages = nfs_direct_count_pages(user_addr, bytes);
down_read(&current->mm->mmap_sem);
result = get_user_pages(current, current->mm, user_addr,
data->npages, 0, 0, data->pagevec, NULL);
......@@ -676,8 +651,11 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l
started += bytes;
user_addr += bytes;
pos += bytes;
/* FIXME: Remove this useless math from the final patch */
pgbase += bytes;
pgbase &= ~PAGE_MASK;
BUG_ON(pgbase != (user_addr & ~PAGE_MASK));
count -= bytes;
} while (count != 0);
......
fs/nfs/read.c
浏览文件 @ 97148ba2
......@@ -43,13 +43,15 @@ static mempool_t *nfs_rdata_mempool;
#define MIN_POOL_READ (32)
struct nfs_read_data *nfs_readdata_alloc(unsigned int pagecount)
struct nfs_read_data *nfs_readdata_alloc(size_t len)
{
unsigned int pagecount = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
struct nfs_read_data *p = mempool_alloc(nfs_rdata_mempool, SLAB_NOFS);
if (p) {
memset(p, 0, sizeof(*p));
INIT_LIST_HEAD(&p->pages);
p->npages = pagecount;
if (pagecount <= ARRAY_SIZE(p->page_array))
p->pagevec = p->page_array;
else {
......@@ -140,7 +142,7 @@ static int nfs_readpage_sync(struct nfs_open_context *ctx, struct inode *inode,
int result;
struct nfs_read_data *rdata;
rdata = nfs_readdata_alloc(1);
rdata = nfs_readdata_alloc(count);
if (!rdata)
return -ENOMEM;
......@@ -336,25 +338,25 @@ static int nfs_pagein_multi(struct list_head *head, struct inode *inode)
struct nfs_page *req = nfs_list_entry(head->next);
struct page *page = req->wb_page;
struct nfs_read_data *data;
unsigned int rsize = NFS_SERVER(inode)->rsize;
unsigned int nbytes, offset;
size_t rsize = NFS_SERVER(inode)->rsize, nbytes;
unsigned int offset;
int requests = 0;
LIST_HEAD(list);
nfs_list_remove_request(req);
nbytes = req->wb_bytes;
for(;;) {
data = nfs_readdata_alloc(1);
do {
size_t len = min(nbytes,rsize);
data = nfs_readdata_alloc(len);
if (!data)
goto out_bad;
INIT_LIST_HEAD(&data->pages);
list_add(&data->pages, &list);
requests++;
if (nbytes <= rsize)
break;
nbytes -= rsize;
}
nbytes -= len;
} while(nbytes != 0);
atomic_set(&req->wb_complete, requests);
ClearPageError(page);
......@@ -402,7 +404,7 @@ static int nfs_pagein_one(struct list_head *head, struct inode *inode)
if (NFS_SERVER(inode)->rsize < PAGE_CACHE_SIZE)
return nfs_pagein_multi(head, inode);
data = nfs_readdata_alloc(NFS_SERVER(inode)->rpages);
data = nfs_readdata_alloc(NFS_SERVER(inode)->rsize);
if (!data)
goto out_bad;
......
fs/nfs/write.c
浏览文件 @ 97148ba2
......@@ -90,22 +90,13 @@ static mempool_t *nfs_commit_mempool;
static DECLARE_WAIT_QUEUE_HEAD(nfs_write_congestion);
struct nfs_write_data *nfs_commit_alloc(unsigned int pagecount)
struct nfs_write_data *nfs_commit_alloc(void)
{
struct nfs_write_data *p = mempool_alloc(nfs_commit_mempool, SLAB_NOFS);
if (p) {
memset(p, 0, sizeof(*p));
INIT_LIST_HEAD(&p->pages);
if (pagecount <= ARRAY_SIZE(p->page_array))
p->pagevec = p->page_array;
else {
p->pagevec = kcalloc(pagecount, sizeof(struct page *), GFP_NOFS);
if (!p->pagevec) {
mempool_free(p, nfs_commit_mempool);
p = NULL;
}
}
}
return p;
}
......@@ -117,13 +108,15 @@ void nfs_commit_free(struct nfs_write_data *p)
mempool_free(p, nfs_commit_mempool);
}
struct nfs_write_data *nfs_writedata_alloc(unsigned int pagecount)
struct nfs_write_data *nfs_writedata_alloc(size_t len)
{
unsigned int pagecount = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
struct nfs_write_data *p = mempool_alloc(nfs_wdata_mempool, SLAB_NOFS);
if (p) {
memset(p, 0, sizeof(*p));
INIT_LIST_HEAD(&p->pages);
p->npages = pagecount;
if (pagecount <= ARRAY_SIZE(p->page_array))
p->pagevec = p->page_array;
else {
......@@ -208,7 +201,7 @@ static int nfs_writepage_sync(struct nfs_open_context *ctx, struct inode *inode,
int result, written = 0;
struct nfs_write_data *wdata;
wdata = nfs_writedata_alloc(1);
wdata = nfs_writedata_alloc(wsize);
if (!wdata)
return -ENOMEM;
......@@ -999,24 +992,24 @@ static int nfs_flush_multi(struct inode *inode, struct list_head *head, int how)
struct nfs_page *req = nfs_list_entry(head->next);
struct page *page = req->wb_page;
struct nfs_write_data *data;
unsigned int wsize = NFS_SERVER(inode)->wsize;
unsigned int nbytes, offset;
size_t wsize = NFS_SERVER(inode)->wsize, nbytes;
unsigned int offset;
int requests = 0;
LIST_HEAD(list);
nfs_list_remove_request(req);
nbytes = req->wb_bytes;
for (;;) {
data = nfs_writedata_alloc(1);
do {
size_t len = min(nbytes, wsize);
data = nfs_writedata_alloc(len);
if (!data)
goto out_bad;
list_add(&data->pages, &list);
requests++;
if (nbytes <= wsize)
break;
nbytes -= wsize;
}
nbytes -= len;
} while (nbytes != 0);
atomic_set(&req->wb_complete, requests);
ClearPageError(page);
......@@ -1070,7 +1063,7 @@ static int nfs_flush_one(struct inode *inode, struct list_head *head, int how)
struct nfs_write_data *data;
unsigned int count;
data = nfs_writedata_alloc(NFS_SERVER(inode)->wpages);
data = nfs_writedata_alloc(NFS_SERVER(inode)->wsize);
if (!data)
goto out_bad;
......@@ -1378,7 +1371,7 @@ nfs_commit_list(struct inode *inode, struct list_head *head, int how)
struct nfs_write_data *data;
struct nfs_page *req;
data = nfs_commit_alloc(NFS_SERVER(inode)->wpages);
data = nfs_commit_alloc();
if (!data)
goto out_bad;
......
fs/super.c
浏览文件 @ 97148ba2
......@@ -49,6 +49,7 @@ DEFINE_SPINLOCK(sb_lock);
/**
* alloc_super - create new superblock
* @type: filesystem type superblock should belong to
*
* Allocates and initializes a new &struct super_block. alloc_super()
* returns a pointer new superblock or %NULL if allocation had failed.
......
include/asm-arm/arch-s3c2410/anubis-cpld.h
浏览文件 @ 97148ba2
......@@ -9,9 +9,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
*
*/
#ifndef __ASM_ARCH_ANUBISCPLD_H
......
include/asm-arm/arch-s3c2410/anubis-irq.h
浏览文件 @ 97148ba2
......@@ -9,9 +9,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
*/
*/
#ifndef __ASM_ARCH_ANUBISIRQ_H
#define __ASM_ARCH_ANUBISIRQ_H
......
include/asm-arm/arch-s3c2410/anubis-map.h
浏览文件 @ 97148ba2
......@@ -9,8 +9,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
*/
/* needs arch/map.h including with this */
......
include/asm-arm/arch-s3c2410/audio.h
浏览文件 @ 97148ba2
......@@ -9,10 +9,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 20-Nov-2004 BJD Created file
* 07-Mar-2005 BJD Added suspend/resume calls
*/
#ifndef __ASM_ARCH_AUDIO_H
......
include/asm-arm/arch-s3c2410/bast-cpld.h
浏览文件 @ 97148ba2
......@@ -8,11 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 25-May-2003 BJD Created file, added CTRL1 registers
* 30-Aug-2004 BJD Updated definitions from 2.4.26 port
* 30-Aug-2004 BJD Added CTRL3 and CTRL4 definitions
*/
#ifndef __ASM_ARCH_BASTCPLD_H
......
include/asm-arm/arch-s3c2410/bast-irq.h
浏览文件 @ 97148ba2
......@@ -8,11 +8,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 14-Sep-2004 BJD Fixed IRQ_USBOC definition
* 06-Jan-2003 BJD Linux 2.6.0 version
*/
*/
#ifndef __ASM_ARCH_BASTIRQ_H
#define __ASM_ARCH_BASTIRQ_H
......
include/asm-arm/arch-s3c2410/bast-map.h
浏览文件 @ 97148ba2
......@@ -8,10 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics from arch/map.h
* 12-Mar-2004 BJD Fixed header include protection
*/
/* needs arch/map.h including with this */
......
include/asm-arm/arch-s3c2410/bast-pmu.h
浏览文件 @ 97148ba2
......@@ -9,9 +9,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 08-Oct-2003 BJD Initial creation
*/
#ifndef __ASM_ARCH_BASTPMU_H
......
include/asm-arm/arch-s3c2410/debug-macro.S
浏览文件 @ 97148ba2
......@@ -10,9 +10,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
#include <asm/arch/map.h>
......
include/asm-arm/arch-s3c2410/fb.h
浏览文件 @ 97148ba2
......@@ -7,13 +7,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*
* Changelog:
* 07-Sep-2004 RTP Created file
* 03-Nov-2004 BJD Updated and minor cleanups
* 03-Aug-2005 RTP Renamed to fb.h
* 26-Oct-2005 BJD Changed name of platdata init
*/
#ifndef __ASM_ARM_FB_H
......
include/asm-arm/arch-s3c2410/hardware.h
浏览文件 @ 97148ba2
......@@ -8,16 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 21-May-2003 BJD Created file
* 06-Jun-2003 BJD Added CPU frequency settings
* 03-Sep-2003 BJD Linux v2.6 support
* 12-Mar-2004 BJD Fixed include protection, fixed type of clock vars
* 14-Sep-2004 BJD Added misccr and getpin to gpio
* 01-Oct-2004 BJD Added the new gpio functions
* 16-Oct-2004 BJD Removed the clock variables
* 15-Jan-2006 LCVR Added s3c2400_gpio_getirq()
*/
#ifndef __ASM_ARCH_HARDWARE_H
......
include/asm-arm/arch-s3c2410/idle.h
浏览文件 @ 97148ba2
......@@ -8,10 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 CPU Idle controls
*
* Changelog:
* 28-Oct-2004 BJD Initial version
*
*/
#ifndef __ASM_ARCH_IDLE_H
......
include/asm-arm/arch-s3c2410/iic.h
浏览文件 @ 97148ba2
......@@ -8,10 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 05-Oct-2004 BJD Created file
* 19-Oct-2004 BJD Updated for s3c2440
*/
#ifndef __ASM_ARCH_IIC_H
......
include/asm-arm/arch-s3c2410/io.h
浏览文件 @ 97148ba2
......@@ -4,13 +4,7 @@
*
* Copyright (C) 1997 Russell King
* (C) 2003 Simtec Electronics
*
* Modifications:
* 06-Dec-1997 RMK Created.
* 02-Sep-2003 BJD Modified for S3C2410
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 13-Oct-2005 BJD Fixed problems with LDRH/STRH offset range
*/
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
......
include/asm-arm/arch-s3c2410/irqs.h
浏览文件 @ 97148ba2
......@@ -6,14 +6,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 12-May-2003 BJD Created file
* 08-Jan-2003 BJD Linux 2.6.0 version, moved BAST bits out
* 12-Mar-2004 BJD Fixed bug in header protection
* 10-Feb-2005 BJD Added camera IRQ from guillaume.gourat@nexvision.tv
* 28-Feb-2005 BJD Updated s3c2440 IRQs
*/
*/
#ifndef __ASM_ARCH_IRQS_H
......
include/asm-arm/arch-s3c2410/map.h
浏览文件 @ 97148ba2
......@@ -8,13 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 12-May-2003 BJD Created file
* 06-Jan-2003 BJD Linux 2.6.0 version, moved bast specifics out
* 10-Feb-2005 BJD Added CAMIF definition from guillaume.gourat@nexvision.tv
* 10-Mar-2005 LCVR Added support to S3C2400, changed {VA,SZ} names
* 15-Jan-2006 LCVR Added S3C24XX_PA macros for common S3C24XX resources
*/
#ifndef __ASM_ARCH_MAP_H
......
include/asm-arm/arch-s3c2410/memory.h
浏览文件 @ 97148ba2
/*
* linux/include/asm-arm/arch-s3c2410/memory.h
*
/* linux/include/asm-arm/arch-s3c2410/memory.h
* from linux/include/asm-arm/arch-rpc/memory.h
*
* Copyright (C) 1996,1997,1998 Russell King.
......@@ -8,16 +6,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 20-Oct-1996 RMK Created
* 31-Dec-1997 RMK Fixed definitions to reduce warnings
* 11-Jan-1998 RMK Uninlined to reduce hits on cache
* 08-Feb-1998 RMK Added __virt_to_bus and __bus_to_virt
* 21-Mar-1999 RMK Renamed to memory.h
* RMK Added TASK_SIZE and PAGE_OFFSET
* 05-Apr-2004 BJD Copied and altered for arch-s3c2410
* 17-Mar-2005 LCVR Modified for S3C2400
*/
#ifndef __ASM_ARCH_MEMORY_H
......
include/asm-arm/arch-s3c2410/nand.h
浏览文件 @ 97148ba2
......@@ -8,9 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 23-Sep-2004 BJD Created file
*/
/* struct s3c2410_nand_set
......
include/asm-arm/arch-s3c2410/osiris-map.h
浏览文件 @ 97148ba2
......@@ -9,8 +9,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
*/
/* needs arch/map.h including with this */
......
include/asm-arm/arch-s3c2410/regs-adc.h
浏览文件 @ 97148ba2
......@@ -7,9 +7,6 @@
* published by the Free Software Foundation.
*
* S3C2410 ADC registers
*
* Changelog:
* 27-09-2004 SAH Created file
*/
#ifndef __ASM_ARCH_REGS_ADC_H
......
include/asm-arm/arch-s3c2410/regs-clock.h
浏览文件 @ 97148ba2
......@@ -8,18 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 clock register definitions
*
* Changelog:
* 18-Aug-2004 Ben Dooks Added 2440 definitions
* 08-Aug-2004 Herbert Ptzl Added CLKCON definitions
* 19-06-2003 Ben Dooks Created file
* 12-03-2004 Ben Dooks Updated include protection
* 29-Sep-2004 Ben Dooks Fixed usage for assembly inclusion
* 10-Feb-2005 Ben Dooks Fixed CAMDIVN address (Guillaume Gourat)
* 10-Mar-2005 Lucas Villa Real Changed S3C2410_VA to S3C24XX_VA
* 27-Aug-2005 Ben Dooks Add clock-slow info
* 20-Oct-2005 Ben Dooks Fixed overflow in PLL (Guillaume Gourat)
* 20-Oct-2005 Ben Dooks Add masks for DCLK (Guillaume Gourat)
*/
#ifndef __ASM_ARM_REGS_CLOCK
......
include/asm-arm/arch-s3c2410/regs-gpio.h
浏览文件 @ 97148ba2
......@@ -8,21 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 GPIO register definitions
*
* Changelog:
* 19-06-2003 BJD Created file
* 23-06-2003 BJD Updated GSTATUS registers
* 12-03-2004 BJD Updated include protection
* 20-07-2004 BJD Added GPIO pin numbers, added Port A definitions
* 04-10-2004 BJD Fixed number of bugs, added EXT IRQ filter defs
* 17-10-2004 BJD Added GSTATUS1 register definitions
* 18-11-2004 BJD Fixed definitions of GPE3, GPE4, GPE5 and GPE6
* 18-11-2004 BJD Added S3C2440 AC97 controls
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 28-Mar-2005 LCVR Fixed definition of GPB10
* 26-Oct-2005 BJD Added generic configuration types
* 27-Nov-2005 LCVR Added definitions to S3C2400 registers
* 15-Jan-2006 LCVR Written S3C24XX_GPIO_BASE() macro
*/
......
include/asm-arm/arch-s3c2410/regs-gpioj.h
浏览文件 @ 97148ba2
......@@ -8,10 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2440 GPIO J register definitions
*
* Changelog:
* 11-Aug-2004 BJD Created file
* 10-Feb-2005 BJD Fix GPJ12 definition (Guillaume Gourat)
*/
......
include/asm-arm/arch-s3c2410/regs-iic.h
浏览文件 @ 97148ba2
......@@ -8,10 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 I2C Controller
*
* Changelog:
* 03-Oct-2004 BJD Initial include for Linux
* 08-Nov-2004 BJD Added S3C2440 filter register
*/
#ifndef __ASM_ARCH_REGS_IIC_H
......
include/asm-arm/arch-s3c2410/regs-iis.h
浏览文件 @ 97148ba2
......@@ -8,17 +8,7 @@
* published by the Free Software Foundation.
*
* S3C2410 IIS register definition
*
* Changelog:
* 19-06-2003 BJD Created file
* 26-06-2003 BJD Finished off definitions for register addresses
* 12-03-2004 BJD Updated include protection
* 07-03-2005 BJD Added FIFO size flags and S3C2440 MPLL
* 05-04-2005 LCVR Added IISFCON definitions for the S3C2400
* 18-07-2005 DA Change IISCON_MPLL to IISMOD_MPLL
* Correct IISMOD_256FS and IISMOD_384FS
* Add IISCON_PSCEN
*/
*/
#ifndef __ASM_ARCH_REGS_IIS_H
#define __ASM_ARCH_REGS_IIS_H
......
include/asm-arm/arch-s3c2410/regs-irq.h
浏览文件 @ 97148ba2
......@@ -6,14 +6,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*
*
* Changelog:
* 19-06-2003 BJD Created file
* 12-03-2004 BJD Updated include protection
* 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
*/
#ifndef ___ASM_ARCH_REGS_IRQ_H
......
include/asm-arm/arch-s3c2410/regs-lcd.h
浏览文件 @ 97148ba2
......@@ -6,14 +6,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*
*
* Changelog:
* 12-06-2003 BJD Created file
* 26-06-2003 BJD Updated LCDCON register definitions
* 12-03-2004 BJD Updated include protection
* 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
......
include/asm-arm/arch-s3c2410/regs-mem.h
浏览文件 @ 97148ba2
......@@ -8,12 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 Memory Control register definitions
*
* Changelog:
* 29-Sep-2004 BJD Initial include for Linux
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 04-Apr-2005 LCVR Added S3C2400 DRAM/BANKSIZE_MASK definitions
*
*/
#ifndef __ASM_ARM_MEMREGS_H
......
include/asm-arm/arch-s3c2410/regs-nand.h
浏览文件 @ 97148ba2
......@@ -8,10 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 NAND register definitions
*
* Changelog:
* 18-Aug-2004 BJD Copied file from 2.4 and updated
* 01-May-2005 BJD Added definitions for s3c2440 controller
*/
#ifndef __ASM_ARM_REGS_NAND
......
include/asm-arm/arch-s3c2410/regs-rtc.h
浏览文件 @ 97148ba2
......@@ -8,11 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 Internal RTC register definition
*
* Changelog:
* 19-06-2003 BJD Created file
* 12-03-2004 BJD Updated include protection
* 15-01-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
*/
#ifndef __ASM_ARCH_REGS_RTC_H
......
include/asm-arm/arch-s3c2410/regs-sdi.h
浏览文件 @ 97148ba2
......@@ -8,11 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 MMC/SDIO register definitions
*
* Changelog:
* 18-Aug-2004 Ben Dooks Created initial file
* 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates
* 29-Nov-2004 Ben Dooks Updated Koen's patch
*/
#ifndef __ASM_ARM_REGS_SDI
......
include/asm-arm/arch-s3c2410/regs-serial.h
浏览文件 @ 97148ba2
......@@ -27,10 +27,7 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Modifications:
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
*/
*/
#ifndef __ASM_ARM_REGS_SERIAL_H
#define __ASM_ARM_REGS_SERIAL_H
......
include/asm-arm/arch-s3c2410/regs-spi.h
浏览文件 @ 97148ba2
......@@ -7,13 +7,7 @@
* published by the Free Software Foundation.
*
* S3C2410 SPI register definition
*
* Changelog:
* 20-04-2004 KF Created file
* 04-10-2004 BJD Removed VA address (no longer mapped)
* tidied file for submission
* 03-04-2005 LCVR Added S3C2400_SPPIN_nCS definition
*/
*/
#ifndef __ASM_ARCH_REGS_SPI_H
#define __ASM_ARCH_REGS_SPI_H
......
include/asm-arm/arch-s3c2410/regs-timer.h
浏览文件 @ 97148ba2
......@@ -8,13 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 Timer configuration
*
* Changelog:
* 05-06-2003 BJD Created file
* 26-06-2003 BJD Added more timer definitions to mux / control
* 12-03-2004 BJD Updated include protection
* 10-02-2005 BJD Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat)
* 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
......
include/asm-arm/arch-s3c2410/regs-udc.h
浏览文件 @ 97148ba2
......@@ -6,13 +6,7 @@
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Changelog:
* 01-08-2004 Initial creation
* 12-09-2004 Cleanup for submission
* 24-10-2004 Fixed S3C2410_UDC_MAXP_REG definition
* 10-03-2005 Changed S3C2410_VA to S3C24XX_VA
*/
*/
#ifndef __ASM_ARCH_REGS_UDC_H
#define __ASM_ARCH_REGS_UDC_H
......
include/asm-arm/arch-s3c2410/regs-watchdog.h
浏览文件 @ 97148ba2
/* linux/include/asm/arch-s3c2410/regs0watchdog.h
/* linux/include/asm/arch-s3c2410/regs-watchdog.h
*
* Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
* http://www.simtec.co.uk/products/SWLINUX/
......@@ -8,11 +8,6 @@
* published by the Free Software Foundation.
*
* S3C2410 Watchdog timer control
*
* Changelog:
* 21-06-2003 BJD Created file
* 12-03-2004 BJD Updated include protection
* 10-03-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
*/
......
include/asm-arm/arch-s3c2410/system.h
浏览文件 @ 97148ba2
......@@ -8,14 +8,7 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 12-May-2003 BJD Created file
* 14-May-2003 BJD Removed idle to aid debugging
* 12-Jun-2003 BJD Added reset via watchdog
* 04-Sep-2003 BJD Moved to v2.6
* 28-Oct-2004 BJD Added over-ride for idle, and fixed reset panic()
*/
*/
#include <asm/hardware.h>
#include <asm/io.h>
......
include/asm-arm/arch-s3c2410/timex.h
浏览文件 @ 97148ba2
......@@ -8,12 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 02-Sep-2003 BJD Created file
* 05-Jan-2004 BJD Updated for Linux 2.6.0
* 22-Nov-2004 BJD Fixed CLOCK_TICK_RATE
* 10-Jan-2004 BJD Removed s3c2410_clock_tick_rate
*/
#ifndef __ASM_ARCH_TIMEX_H
......
include/asm-arm/arch-s3c2410/uncompress.h
浏览文件 @ 97148ba2
......@@ -8,15 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 22-May-2003 BJD Created
* 08-Sep-2003 BJD Moved to linux v2.6
* 12-Mar-2004 BJD Updated header protection
* 12-Oct-2004 BJD Take account of debug uart configuration
* 15-Nov-2004 BJD Fixed uart configuration
* 22-Feb-2005 BJD Added watchdog to uncompress
* 04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
......
include/asm-arm/arch-s3c2410/usb-control.h
浏览文件 @ 97148ba2
......@@ -8,11 +8,6 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 11-Sep-2004 BJD Created file
* 21-Sep-2004 BJD Updated port info
* 09-Aug-2005 BJD Renamed s3c2410_report_oc s3c2410_usb_report_oc
*/
#ifndef __ASM_ARCH_USBCONTROL_H
......
include/asm-arm/arch-s3c2410/vmalloc.h
浏览文件 @ 97148ba2
......@@ -10,11 +10,7 @@
* published by the Free Software Foundation.
*
* S3C2410 vmalloc definition
*
* Changelog:
* 12-Mar-2004 BJD Fixed header, added include protection
* 12=Mar-2004 BJD Fixed VMALLOC_END definitions
*/
*/
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
......
include/asm-arm/spinlock.h
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-generic/audit_read.h 0 → 100644
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-generic/audit_write.h 0 → 100644
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-i386/Kbuild
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-ia64/mman.h
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-ia64/unistd.h
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-sh/page.h
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-sparc/mman.h
浏览文件 @ 97148ba2
此差异已折叠。
include/asm-sparc64/mman.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/atmdev.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/audit.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/hrtimer.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/ktime.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/mmc/host.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/mmc/mmc.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/nfs_fs.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/nfs_xdr.h
浏览文件 @ 97148ba2
此差异已折叠。
include/linux/pci_ids.h
浏览文件 @ 97148ba2
此差异已折叠。
kernel/audit.c
浏览文件 @ 97148ba2
此差异已折叠。
kernel/audit.h
浏览文件 @ 97148ba2
此差异已折叠。
kernel/auditfilter.c
浏览文件 @ 97148ba2
此差异已折叠。
kernel/auditsc.c
浏览文件 @ 97148ba2
此差异已折叠。
kernel/futex.c
浏览文件 @ 97148ba2
此差异已折叠。
kernel/panic.c
浏览文件 @ 97148ba2
此差异已折叠。
kernel/power/Kconfig
浏览文件 @ 97148ba2
此差异已折叠。
kernel/spinlock.c
浏览文件 @ 97148ba2
此差异已折叠。
mm/mmap.c
浏览文件 @ 97148ba2
此差异已折叠。
mm/truncate.c
浏览文件 @ 97148ba2
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或