MIPS: Loongson: Remove out-of-date board-specific kgdb source code

Since the re-implementation of kgdb by commit
88547001 the platform-specific version
has become superfluous, remove it.
Signed-off-by: NWu Zhangjin <wuzj@lemote.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

arch/mips/lemote/lm2e/Makefile

@@ -2,6 +2,6 @@
 # Makefile for Lemote Fulong mini-PC board.
 #
 
-obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o dbg_io.o mem.o
+obj-y += setup.o prom.o reset.o irq.o pci.o bonito-irq.o mem.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/lemote/lm2e/dbg_io.c

-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
- *
- * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/types.h>
-
-#include <asm/serial.h>
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-/* ----------------------------------------------------- */
-
-/* === CONFIG === */
-#ifdef CONFIG_64BIT
-#define         BASE                    (0xffffffffbfd003f8)
-#else
-#define         BASE                    (0xbfd003f8)
-#endif
-
-#define         MAX_BAUD                BASE_BAUD
-/* === END OF CONFIG === */
-
-#define         REG_OFFSET              1
-
-/* register offset */
-#define         OFS_RCV_BUFFER          0
-#define         OFS_TRANS_HOLD          0
-#define         OFS_SEND_BUFFER         0
-#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
-#define         OFS_INTR_ID             (2*REG_OFFSET)
-#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
-#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
-#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
-#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
-#define         OFS_LINE_STATUS         (5*REG_OFFSET)
-#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
-#define         OFS_RS232_INPUT         (6*REG_OFFSET)
-#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
-
-#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
-#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
-
-/* memory-mapped read/write of the port */
-#define         UART16550_READ(y)	readb((char *)BASE + (y))
-#define         UART16550_WRITE(y, z)	writeb(z, (char *)BASE + (y))
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	u32 divisor;
-
-	/* disable interrupts */
-	UART16550_WRITE(OFS_INTR_ENABLE, 0);
-
-	/* set up buad rate */
-	/* set DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
-
-	/* set divisor */
-	divisor = MAX_BAUD / baud;
-	UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
-	UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-
-	/* clear DIAB bit */
-	UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
-
-	/* set data format */
-	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0) ;
-	return UART16550_READ(OFS_RCV_BUFFER);
-}
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		/*
-		   debugInit(UART16550_BAUD_115200,
-		   UART16550_DATA_8BIT,
-		   UART16550_PARITY_NONE, UART16550_STOP_1BIT); */
-	}
-
-	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0) ;
-	UART16550_WRITE(OFS_SEND_BUFFER, byte);
-	return 1;
-}