From 945d4202d95ed75c4af2968a02e58625d0558896 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 15 Feb 2015 17:16:16 +0200 Subject: [PATCH] iwlwifi: mvm: restart firmware recording when no configuration is set Sometimes the firmware will have a hard coded configuration. In this case, the driver won't find any configuration in the firmware file, and it will have to re-start recording in case it has been stopped. This can't be done by the configuration host command since there is no such host command configured. Do that with the registers instead. Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-prph.h | 1 - drivers/net/wireless/iwlwifi/mvm/fw.c | 19 +++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 6221e4dfc64f..6095088b88d9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -370,7 +370,6 @@ enum secure_load_status_reg { #define MON_BUFF_CYCLE_CNT (0xa03c48) #define DBGC_IN_SAMPLE (0xa03c00) -#define DBGC_OUT_CTRL (0xa03c0c) /* FW chicken bits */ #define LMPM_CHICK 0xA01FF8 diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 64e9039254b9..a81da4cde643 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -544,6 +544,14 @@ int iwl_mvm_fw_dbg_collect_trig(struct iwl_mvm *mvm, return 0; } +static inline void iwl_mvm_restart_early_start(struct iwl_mvm *mvm) +{ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) + iwl_clear_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + else + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 1); +} + int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) { u8 *ptr; @@ -554,6 +562,14 @@ int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) "Invalid configuration %d\n", conf_id)) return -EINVAL; + /* EARLY START - firmware's configuration is hard coded */ + if ((!mvm->fw->dbg_conf_tlv[conf_id] || + !mvm->fw->dbg_conf_tlv[conf_id]->num_of_hcmds) && + conf_id == FW_DBG_START_FROM_ALIVE) { + iwl_mvm_restart_early_start(mvm); + return 0; + } + if (!mvm->fw->dbg_conf_tlv[conf_id]) return -EINVAL; @@ -663,6 +679,9 @@ int iwl_mvm_up(struct iwl_mvm *mvm) IWL_ERR(mvm, "Failed to initialize Smart Fifo\n"); mvm->fw_dbg_conf = FW_DBG_INVALID; + /* if we have a destination, assume EARLY START */ + if (mvm->fw->dbg_dest_tlv) + mvm->fw_dbg_conf = FW_DBG_START_FROM_ALIVE; iwl_mvm_start_fw_dbg_conf(mvm, FW_DBG_START_FROM_ALIVE); ret = iwl_send_tx_ant_cfg(mvm, iwl_mvm_get_valid_tx_ant(mvm)); -- GitLab