Staging: Octeon Ethernet: Enable scatter-gather.

Octeon ethernet hardware can handle NETIF_F_SG, so we enable it.

A gather list of up to six fragments will fit in the SKB's CB
structure, so no extra memory is required.  If a SKB has more than six
fragments, we must linearize it.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

drivers/staging/octeon/ethernet-tx.c

@@ -53,6 +53,8 @@
 
 #include "cvmx-gmxx-defs.h"
 
+#define CVM_OCT_SKB_CB(skb)	((u64 *)((skb)->cb))
+
 /*
  * You can define GET_SKBUFF_QOS() to override how the skbuff output
  * function determines which output queue is used. The default
@@ -121,6 +123,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 	uint64_t old_scratch;
 	uint64_t old_scratch2;
 	int qos;
+	int i;
 	enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;
 	struct octeon_ethernet *priv = netdev_priv(dev);
 	struct sk_buff *to_free_list;
@@ -170,6 +173,28 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 					       MAX_SKB_TO_FREE);
 	}
 
+	/*
+	 * We have space for 6 segment pointers, If there will be more
+	 * than that, we must linearize.
+	 */
+	if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {
+		if (unlikely(__skb_linearize(skb))) {
+			queue_type = QUEUE_DROP;
+			if (USE_ASYNC_IOBDMA) {
+				/* Get the number of skbuffs in use by the hardware */
+				CVMX_SYNCIOBDMA;
+				skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+			} else {
+				/* Get the number of skbuffs in use by the hardware */
+				skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
+								       MAX_SKB_TO_FREE);
+			}
+			skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau + qos * 4);
+			spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+			goto skip_xmit;
+		}
+	}
+
 	/*
 	 * The CN3XXX series of parts has an errata (GMX-401) which
 	 * causes the GMX block to hang if a collision occurs towards
@@ -198,13 +223,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 		}
 	}
 
-	/* Build the PKO buffer pointer */
-	hw_buffer.u64 = 0;
-	hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data);
-	hw_buffer.s.pool = 0;
-	hw_buffer.s.size =
-	    (unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head;
-
 	/* Build the PKO command */
 	pko_command.u64 = 0;
 	pko_command.s.n2 = 1;	/* Don't pollute L2 with the outgoing packet */
@@ -215,6 +233,31 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	pko_command.s.dontfree = 1;
 	pko_command.s.reg0 = priv->fau + qos * 4;
+
+	/* Build the PKO buffer pointer */
+	hw_buffer.u64 = 0;
+	if (skb_shinfo(skb)->nr_frags == 0) {
+		hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+		hw_buffer.s.pool = 0;
+		hw_buffer.s.size = skb->len;
+	} else {
+		hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+		hw_buffer.s.pool = 0;
+		hw_buffer.s.size = skb_headlen(skb);
+		CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
+		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+			struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
+			hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+			hw_buffer.s.size = fs->size;
+			CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
+		}
+		hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
+		hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
+		pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
+		pko_command.s.gather = 1;
+		goto dont_put_skbuff_in_hw;
+	}
+
 	/*
 	 * See if we can put this skb in the FPA pool. Any strange
 	 * behavior from the Linux networking stack will most likely

drivers/staging/octeon/ethernet.c

@@ -484,8 +484,11 @@ int cvm_oct_common_init(struct net_device *dev)
 	    && (always_use_pow || strstr(pow_send_list, dev->name)))
 		priv->queue = -1;
 
-	if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
+	if (priv->queue != -1) {
+		dev->features |= NETIF_F_SG;
+		if (USE_HW_TCPUDP_CHECKSUM)
 			dev->features |= NETIF_F_IP_CSUM;
+	}
 
 	/* We do our own locking, Linux doesn't need to */
 	dev->features |= NETIF_F_LLTX;