Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: pm: avoid writing the auxillary control register for ARMv7
  ARM: pm: some ARMv7 requires a dsb in resume to ensure correctness
  ARM: pm: arm920/926: fix number of registers saved
  ARM: pm: CPU specific code should not overwrite r1 (v:p offset)
  ARM: 7066/1: proc-v7: disable SCTLR.TE when disabling MMU
  ARM: 7065/1: kexec: ensure new kernel is entered in ARM state
  ARM: 7003/1: vexpress: Add clock definition for the SP805.
  ARM: 7051/1: cpuimx* boards: fix mach-types errors
  ARM: 7019/1: Footbridge: select CLKEVT_I8253 for ARCH_NETWINDER
  ARM: 7015/1: ARM errata: Possible cache data corruption with hit-under-miss enabled
  ARM: 7014/1: cache-l2x0: Fix L2 Cache size calculation.
  ARM: 6967/1: ep93xx: ts72xx: fix board model detection
  ARM: 6965/1: ep93xx: add model detection for ts-7300 and ts-7400 boards
  ARM: cache: detect VIPT aliasing I-cache on ARMv6
  ARM: twd: register clockevents device before enabling PPI
  ARM: realview: ensure visibility of writes during reset
  ARM: perf: make name of arm_pmu_type consistent
  ARM: perf: fix prototype of release_pmu
  ARM: fix perf build with uclibc toolchains

arch/arm/Kconfig

@@ -1271,6 +1271,18 @@ config ARM_ERRATA_754327
 	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
 	  written polling loops from denying visibility of updates to memory.
 
+config ARM_ERRATA_364296
+	bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+	depends on CPU_V6 && !SMP
+	help
+	  This options enables the workaround for the 364296 ARM1136
+	  r0p2 erratum (possible cache data corruption with
+	  hit-under-miss enabled). It sets the undocumented bit 31 in
+	  the auxiliary control register and the FI bit in the control
+	  register, thus disabling hit-under-miss without putting the
+	  processor into full low interrupt latency mode. ARM11MPCore
+	  is not affected.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -64,7 +64,7 @@
 #define L2X0_AUX_CTRL_MASK			0xc0000fff
 #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x3 << 17)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
 #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27

arch/arm/include/asm/pmu.h

@@ -41,7 +41,7 @@ struct arm_pmu_platdata {
  * encoded error on failure.
  */
 extern struct platform_device *
-reserve_pmu(enum arm_pmu_type device);
+reserve_pmu(enum arm_pmu_type type);
 
 /**
  * release_pmu() - Relinquish control of the performance counters
@@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type);
  * the actual hardware initialisation.
  */
 extern int
-init_pmu(enum arm_pmu_type device);
+init_pmu(enum arm_pmu_type type);
 
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>
 
 static inline struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
 {
 	return ERR_PTR(-ENODEV);
 }
 
 static inline int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type type)
 {
 	return -ENODEV;
 }
 
 static inline int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
 {
 	return -ENODEV;
 }

arch/arm/kernel/pmu.c

@@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev,
 {
 	if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
 		pr_warning("received registration request for unknown "
-				"device %d\n", type);
+				"PMU device type %d\n", type);
 		return -EINVAL;
 	}
 
@@ -112,17 +112,17 @@ static int __init register_pmu_driver(void)
 device_initcall(register_pmu_driver);
 
 struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
 {
 	struct platform_device *pdev;
 
-	if (test_and_set_bit_lock(device, &pmu_lock)) {
+	if (test_and_set_bit_lock(type, &pmu_lock)) {
 		pdev = ERR_PTR(-EBUSY);
-	} else if (pmu_devices[device] == NULL) {
-		clear_bit_unlock(device, &pmu_lock);
+	} else if (pmu_devices[type] == NULL) {
+		clear_bit_unlock(type, &pmu_lock);
 		pdev = ERR_PTR(-ENODEV);
 	} else {
-		pdev = pmu_devices[device];
+		pdev = pmu_devices[type];
 	}
 
 	return pdev;
@@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device)
 EXPORT_SYMBOL_GPL(reserve_pmu);
 
 int
-release_pmu(enum arm_pmu_type device)
+release_pmu(enum arm_pmu_type type)
 {
-	if (WARN_ON(!pmu_devices[device]))
+	if (WARN_ON(!pmu_devices[type]))
 		return -EINVAL;
-	clear_bit_unlock(device, &pmu_lock);
+	clear_bit_unlock(type, &pmu_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(release_pmu);
@@ -182,17 +182,17 @@ init_cpu_pmu(void)
 }
 
 int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
 {
 	int err = 0;
 
-	switch (device) {
+	switch (type) {
 	case ARM_PMU_DEVICE_CPU:
 		err = init_cpu_pmu();
 		break;
 	default:
-		pr_warning("attempt to initialise unknown device %d\n",
-				device);
+		pr_warning("attempt to initialise PMU of unknown "
+			   "type %d\n", type);
 		err = -EINVAL;
 	}
 

arch/arm/kernel/relocate_kernel.S

@@ -57,7 +57,8 @@ relocate_new_kernel:
 	mov r0,#0
 	ldr r1,kexec_mach_type
 	ldr r2,kexec_boot_atags
-	mov pc,lr
+ ARM(	mov pc, lr	)
+ THUMB(	bx lr		)
 
 	.align
 

arch/arm/kernel/setup.c

@@ -280,18 +280,19 @@ static void __init cacheid_init(void)
 	if (arch >= CPU_ARCH_ARMv6) {
 		if ((cachetype & (7 << 29)) == 4 << 29) {
 			/* ARMv7 register format */
+			arch = CPU_ARCH_ARMv7;
 			cacheid = CACHEID_VIPT_NONALIASING;
 			if ((cachetype & (3 << 14)) == 1 << 14)
 				cacheid |= CACHEID_ASID_TAGGED;
-			else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
-				cacheid |= CACHEID_VIPT_I_ALIASING;
-		} else if (cachetype & (1 << 23)) {
-			cacheid = CACHEID_VIPT_ALIASING;
 		} else {
+			arch = CPU_ARCH_ARMv6;
+			if (cachetype & (1 << 23))
+				cacheid = CACHEID_VIPT_ALIASING;
+			else
 				cacheid = CACHEID_VIPT_NONALIASING;
-			if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
-				cacheid |= CACHEID_VIPT_I_ALIASING;
 		}
+		if (cpu_has_aliasing_icache(arch))
+			cacheid |= CACHEID_VIPT_I_ALIASING;
 	} else {
 		cacheid = CACHEID_VIVT;
 	}

arch/arm/kernel/smp_twd.c

@@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
 	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
 
+	clockevents_register_device(clk);
+
 	/* Make sure our local interrupt controller has this enabled */
 	gic_enable_ppi(clk->irq);
-
-	clockevents_register_device(clk);
 }

arch/arm/mach-ep93xx/include/mach/ts72xx.h

@@ -6,7 +6,7 @@
  * TS72xx memory map:
  *
  * virt		phys		size
- * febff000	22000000	4K	model number register
+ * febff000	22000000	4K	model number register (bits 0-2)
  * febfe000	22400000	4K	options register
  * febfd000	22800000	4K	options register #2
  * febf9000	10800000	4K	TS-5620 RTC index register
@@ -20,6 +20,9 @@
 #define TS72XX_MODEL_TS7200		0x00
 #define TS72XX_MODEL_TS7250		0x01
 #define TS72XX_MODEL_TS7260		0x02
+#define TS72XX_MODEL_TS7300		0x03
+#define TS72XX_MODEL_TS7400		0x04
+#define TS72XX_MODEL_MASK		0x07
 
 
 #define TS72XX_OPTIONS_PHYS_BASE	0x22400000
@@ -51,19 +54,34 @@
 
 #ifndef __ASSEMBLY__
 
+static inline int ts72xx_model(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
+}
+
 static inline int board_is_ts7200(void)
 {
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+	return ts72xx_model() == TS72XX_MODEL_TS7200;
 }
 
 static inline int board_is_ts7250(void)
 {
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+	return ts72xx_model() == TS72XX_MODEL_TS7250;
 }
 
 static inline int board_is_ts7260(void)
 {
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+	return ts72xx_model() == TS72XX_MODEL_TS7260;
+}
+
+static inline int board_is_ts7300(void)
+{
+	return ts72xx_model()  == TS72XX_MODEL_TS7300;
+}
+
+static inline int board_is_ts7400(void)
+{
+	return ts72xx_model() == TS72XX_MODEL_TS7400;
 }
 
 static inline int is_max197_installed(void)

arch/arm/mach-footbridge/Kconfig

@@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST
 config ARCH_NETWINDER
 	bool "NetWinder"
 	select CLKSRC_I8253
+	select CLKEVT_I8253
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA

arch/arm/mach-imx/mach-cpuimx27.c

@@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 	.init = eukrea_cpuimx27_timer_init,
 };
 
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.boot_params = MX27_PHYS_OFFSET + 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,

arch/arm/mach-imx/mach-cpuimx35.c

@@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = {
 	.init	= eukrea_cpuimx35_timer_init,
 };
 
-MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
 	.map_io = mx35_map_io,

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = {
 	.init   = eukrea_cpuimx25_timer_init,
 };
 
-MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
 	.boot_params = MX25_PHYS_OFFSET + 0x100,
 	.map_io = mx25_map_io,

arch/arm/mach-realview/include/mach/system.h

@@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd)
 	 */
 	if (realview_reset)
 		realview_reset(mode);
+	dsb();
 }
 
 #endif

arch/arm/mach-vexpress/v2m.c

@@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = {
 	.rate	= 1000000,
 };
 
+static struct clk v2m_ref_clk = {
+	.rate   = 32768,
+};
+
 static struct clk dummy_apb_pclk;
 
 static struct clk_lookup v2m_lookups[] = {
@@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = {
 	}, {	/* CLCD */
 		.dev_id		= "mb:clcd",
 		.clk		= &osc1_clk,
+	}, {	/* SP805 WDT */
+		.dev_id		= "mb:wdt",
+		.clk		= &v2m_ref_clk,
 	}, {	/* SP804 timers */
 		.dev_id		= "sp804",
 		.con_id		= "v2m-timer0",

arch/arm/mm/proc-arm920.S

@@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm920_suspend_size
-.equ	cpu_arm920_suspend_size, 4 * 3
+.equ	cpu_arm920_suspend_size, 4 * 4
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}

arch/arm/mm/proc-arm926.S

@@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm926_suspend_size
-.equ	cpu_arm926_suspend_size, 4 * 3
+.equ	cpu_arm926_suspend_size, 4 * 4
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}

arch/arm/mm/proc-sa1100.S

@@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend)
 
 ENTRY(cpu_sa1100_do_resume)
 	ldmia	r0, {r4 - r7}			@ load cp regs
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@ flush I+D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@ flush I&D cache
-	mcr	p15, 0, r1, c9, c0, 0		@ invalidate RB
-	mcr	p15, 0, r1, c9, c0, 5		@ allow user space to use RB
+	mov	ip, #0
+	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
+	mcr	p15, 0, ip, c7, c7, 0		@ flush I&D cache
+	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
+	mcr	p15, 0, ip, c9, c0, 5		@ allow user space to use RB
 
 	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
 	mcr	p15, 0, r5, c2, c0, 0		@ translation table base addr

arch/arm/mm/proc-v6.S

@@ -223,6 +223,22 @@ __v6_setup:
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+#ifdef CONFIG_ARM_ERRATA_364296
+	/*
+	 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
+	 * corruption with hit-under-miss enabled). The conditional code below
+	 * (setting the undocumented bit 31 in the auxiliary control register
+	 * and the FI bit in the control register) disables hit-under-miss
+	 * without putting the processor into full low interrupt latency mode.
+	 */
+	ldr	r6, =0x4107b362			@ id for ARM1136 r0p2
+	mrc	p15, 0, r5, c0, c0, 0		@ get processor id
+	teq	r5, r6				@ check for the faulty core
+	mrceq	p15, 0, r5, c1, c0, 1		@ load aux control reg
+	orreq	r5, r5, #(1 << 31)		@ set the undocumented bit 31
+	mcreq	p15, 0, r5, c1, c0, 1		@ write aux control reg
+	orreq	r0, r0, #(1 << 21)		@ low interrupt latency configuration
+#endif
 	mov	pc, lr				@ return to head.S:__ret
 
 	/*

arch/arm/mm/proc-v7.S

@@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin)
 ENTRY(cpu_v7_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
+ THUMB(	bic	r1, r1, #1 << 30 )		@ SCTLR.TE (Thumb exceptions)
 	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
 	isb
 	mov	pc, r0
@@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume)
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
+	teq	r4, r10			@ Is it already set?
+	mcrne	p15, 0, r10, c1, c0, 1	@ No, so write it
 	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access control
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
 	mcr	p15, 0, r4, c10, c2, 0	@ write PRRR
 	mcr	p15, 0, r5, c10, c2, 1	@ write NMRR
 	isb
+	dsb
 	mov	r0, r9			@ control register
 	mov	r2, r7, lsr #14		@ get TTB0 base
 	mov	r2, r2, lsl #14

arch/arm/mm/proc-xsc3.S

@@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	.align
 
 .globl	cpu_xsc3_suspend_size
-.equ	cpu_xsc3_suspend_size, 4 * 8
+.equ	cpu_xsc3_suspend_size, 4 * 7
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
@@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ auxiliary control reg
 	mrc 	p15, 0, r10, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
-	stmia	r0, {r1, r4 - r10}	@ store v:p offset + cp regs
+	stmia	r0, {r4 - r10}		@ store cp regs
 	ldmia	sp!, {r4 - r10, pc}
 ENDPROC(cpu_xsc3_do_suspend)
 
 ENTRY(cpu_xsc3_do_resume)
-	ldmia	r0, {r1, r4 - r10}	@ load v:p offset + cp regs
+	ldmia	r0, {r4 - r10}		@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
 	mcr	p15, 0, ip, c7, c10, 4	@ drain write (&fill) buffer

arch/arm/tools/mach-types

@@ -351,7 +351,7 @@ centro			MACH_CENTRO		CENTRO			1944
 nokia_rx51		MACH_NOKIA_RX51		NOKIA_RX51		1955
 omap_zoom2		MACH_OMAP_ZOOM2		OMAP_ZOOM2		1967
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
-eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_EUKREA_CPUIMX27	EUKREA_CPUIMX27		1975
 acs5k			MACH_ACS5K		ACS5K			1982
 snapper_9260		MACH_SNAPPER_9260	SNAPPER_9260		1987
 dsm320			MACH_DSM320		DSM320			1988
@@ -476,8 +476,8 @@ cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
 omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
 ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
 teton_bga		MACH_TETON_BGA		TETON_BGA		2816
-eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
-eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25SD	EUKREA_CPUIMX25SD	2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35SD	EUKREA_CPUIMX35SD	2821
 eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
 eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
 smdkc210		MACH_SMDKC210		SMDKC210		2838

tools/perf/arch/arm/util/dwarf-regs.c

@@ -8,7 +8,10 @@
  * published by the Free Software Foundation.
  */
 
+#include <stdlib.h>
+#ifndef __UCLIBC__
 #include <libio.h>
+#endif
 #include <dwarf-regs.h>
 
 struct pt_regs_dwarfnum {